Why Can't Access Wireless Internet To Public Places
Oct 7, 2011Why I can't acces the internet in public places with my laptop.
View 1 RepliesWhy I can't acces the internet in public places with my laptop.
View 1 Replieslaptop running xp pro sp3 Pc running xp home sp3.After re-boot or re-start,can access my network places on the laptop.But only once.After,that,will not open my network places.I have tried to open/explore the folder with explorer,it will display contents but not open the shared file selected.The pc can display laptop's my network places folder,but will not open shared file on the laptop.
View 3 Replies View Relatedhow to link 3 different places where 2 of them have internet DSL connections.Actually Im running this layout...
Place 1:
DSL Modem connected to "Router 1" with DHCP Enabled. 192.168.1.1 and static IP assigned for every element in the network.
"Router 1" got this:
LAN:
2 computers
[code]....
At this point everything is working fine. Computers in "Place 1" can see computers in "Place 2" over network and share files and printers. Plus "Place 2" have internet from "Place 1".I want now to link "Place 2" to a "Place 3" using the same Nanostation M5 antennas and I can do it the same way I did Place1-Place2, BUT, what about "Place 3" router? it is connected to a DSL modem. "Router 3" should be DHCP Disabled too? What about the internet connection? I would like "Place 2" in the middle would be able to take the internet connection from both Place 1 - Place 3. It can be done keeping computers sharing files and folders between all 3 places?
I work at a Public Safety building in Pennsylvania and our employees here share a Wifi connection with a local hospital facility that is in a industrial park behind us. The room we work in is able to access the Public Wifi but only half of the room has a good connection. I went to the local computer store and purchased a Belkin Dual-band wireless Range Extender and got it all set up, now I have the Public Wifi Extention access and it will connect to it but it has no internet access. Now we have no access to the administor or the network from our facility. How do i get internet access thru this range extender? If i connect from the good half of the room to the Public wifi i have a good connection with internet access but as soon as you put it thru the extender no more internet access.
View 1 Replies View RelatedWe need to deploy a Cisco ASA 5510 behind the Internet facing router for Remote Access VPN (RAVPN). We bought the block of 16 IPs (in a different subnet) which is routed through the main router (69.x.x.x)and configured the outside interface of ASA with a public IP 64.x.x.x and subnet mask 255.255.255.240. Below is the network structure.
But, we can't access the ASA by it's public IP.
DSL Modem → RV082 router → Switch → LAN
(69.x.x.x) ↑ (192.168.0.0)
Cisco ASA 5510
(outside: 64.x.x.x, inside: 192.168.0.172)
I am trying to provide internet access to public and private SSID's on Cisco AP541n using VLAN's connected directly to ASA5505. VLAN1 is inside interface (private) and VLAN12 is wlan interface (public SSID). The AP541n is plugged into switch port 0/7 on an ASA 5505.Port 0/7 is configured as trunk mode. I have internet access when connected to private SSID but no internet access when connected to public SSID. why I can't access internet on public SSID?
logging class ip history emergencies
mtu inside 1500
mtu outside 1500
[Code].....
the cisco 2921 Router has a default ip hhtp access class command found in it. Just i changed the default IP to the new ip i will use.The Router is accessable from the LAN only but not from the internet configured the Public ip . I think this is due to the standard access list 23 . how will i access the Router from the Internet using the Public IP.
View 6 Replies View RelatedI have a Cisco ASA 5510 I am using ASDM 6.1
I have a LAN and a DMZ and an internet connection. I am using one of the internet connection IPs to host a HTTP service on a server in my DMZ. (its the same interface as my internet connenction but a different IP to the one used for internet connectivity)
so say my LAN is 192.168.1.x
and my DMZ is 172.168.1.x
I can access DMZ from Lan and vice versa. when i try to access the public IP (or URL) from a pc in my LAN i get nothing.
I have enabled DNS rewrite (doctoring) but it is still not working. the HTTP service is available from other sites.
my dad wants me to get on expanding our home network (getting wireless into other places in the house). i do consider myself pretty tech savvy ( i just built my computer from scratch) but this is a little bit beyond my comfort zone. the 4 ports on the router are keeping me tied up and the size and layout of the house are restricting the wireless range
provider: comcast cable
modem: arris TM502G (comcast provided)
router: linksys wireless-n wrt160n v3
4 pcs running windows xp to windows 7
3 laptops running xindows xp, windows 7 and windows 7 starter (netbook)
1 xbox 360
1 ps3
(looking to add netflix capable bluray players on 2 tvs in the future)
the downstairs layout (router is the star)
the upstairs (red is range of current setup thats a stretch) (blue wanted coverage)
not to scale and a quick draw the top half of the house is off set from the basement area. i used google earth to estimate the range from the router to the outside area of my wanted coverage area and its roughly 80 feet through 4 walls and the flooring i do not believe theres a single router capable of doing that without dropping some serious cash down.as is all the ports are currently tied up, and id like to expand the number of ports, along with getting wireless to the area i pointed out, i have the capability of pulling hard wire through out the house also.
At home, I use my laptop to connect to my wireless router without any trouble.But at: public libraries, Starbucks, hotel rooms... any free public wifi? All attempts to connect meets with the same error: "unable to connect to network" (preceded by the system hanging for a lengthy amount of time). Windows advises me to unplug the router and plug it back in, which obviously isn't an option.It's annoying to troubleshoot, because I'm only having the problem at times where I have no wired access (hence: no way to get to forums like these and look for an answer, update drivers, whatever).
View 6 Replies View RelatedDesktop
Windows 7 64-bit -> cable directly to router
Laptop
Windows 7 64-bit -> wireless
Laptop
Windows 7 64-bit -> wireless
Playstation 3
-> Wireless
Xbox 360
LAN cable from router to 360
Scientific Atlanta 2203C modem to a Cisco Linksys E3000 wireless router.Ok, so if I turn everything on I can see all computers from all computers, but after a few hours/days (random time) everything disappears, and I have to unplug the router and then everything is back. Is there a way to stop this, and just have everything just be there all the time?
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJohn>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : John-PC
Primary Dns Suffix . . . . . . . :
[code]....
We are looking into the possibility of putting in some public wireless access in the public areas of our organization. Its a fairly small building in terms of public access and it needs to span 3 rooms in total. We have a spare BT line into the building - ADSL 2+ - and so will utilize that instead of putting them on our network. We would like to run some router based content filtering on the router - but would use open dns if this isn't possible.I could do to find a good wireless router that will cover the 3 areas . Its not a large budget project as there isn't going to be very highly utilized. We are looking Cisco kit - and have drawn up a few options. Initially we were going to go with the 1140's - but these are access points and as per my understanding aren't going to work with the phone line - as it needs to be a wireless router.
The next area was the Linksys E series (E4200) - they do look really good, and they have the content filtering which we like. What the power and range of the E series is? The only issue we might have is its a fairly old building and so some of the walls are pretty thick - one of which is wooden lined.It has the 3x3 mimo antennas and so guess it would provide some pretty good range/power. If the hardware is cheap enough then we may be able to setup the routers in repeater mode - however I'm not sure if the home devices can work that way? - I think max would be £300 - but that will be decided when I have some better numbers.
I want to use one (or two) AP1232AG-E-K9 access points for Internet connection through a public wireless network (BTFON), where wire broadband is not an option. I've downloaded what I think is the correct manual for the APs and I'm now scratching my head as to where and how to start setting them up. I want to use these Cisco APs in the hope they will give me better wireless performance than I'm currently getting, which is frequently flakey. I've tried to reset the APs to the factory default but there seem to be different ways of doing this depending on what you want and what you've got. I made up a console cable to access the console but there even appear to be different versions of this so I'm not sure if the cable I have is the correct one. I have setup and used lower end wireless devices in the past but these Cisco units seem real complicated.
View 39 Replies View Relatedt's been 4 days in a row now that I can't access wireless Internet on my laptop at a public library that I visit regularly. I have no trouble accessing wireless Internet anywhere else. For several months I have been using wireless Internet at the same library on the same laptop without any problem.Windows troubleshooting message: Windows can't communicate with the device or resource primary DNS serverThe wireless network at the library has no Authentication, it is while accessing a Web-site that it it automatically goes to a page where members have to login, however this hasn't been happening for the last 4 days. I'm able to connect to the network, but with no Internet access. I guess because the DNS won't respond. Here is what I already tried: Disable the firewall and see if that works properly Boot in Safe Mode with Networking and see if it works that way TCP/IP stack repair options for use with Vista or Windows 7 I installed Mozilla firefox.... still no luck[CODE]
View 13 Replies View Relatedhome router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp
View 6 Replies View Relatedam running 2 PCs (one desktop and one laptop) both with windows vista home premium, both are in a home group, are connected by a DIR-615 D-link router/wireless access point, and have file sharing and network discovery enabled, but when I try to access the public folder on either PC from the other I get "The network path could not be found".When I try to troubleshoot this it tells me my modem is having connectivity issues and attempts to find out "why I can't connect to the internet" which is extremely bizarre, as this has nothing to do with the internet connection, I simply wish to access the public folder on a private network
View 7 Replies View RelatedNew Dell laptop w/Windows 8 OS. Cannot access wifi in local cafAt network & sharing center - Access Type: No Internet Access - Getting full signalHave McAfee Antivirus Plus installedHad this problem before and completely uninstalled/reinstalled McAfee. Problem was solved temporarily
View 5 Replies View RelatedI am able to connect perfectly at home but no longer in public areas such as Starbucks, etc. I do not get the public website to agree to the terms and connections. My laptop tries to connect to my homepage and skips the log on page then freezes and I receive an error message that there is no internet connection. When I go to "Data Sharing Center" it states that I am connected.
View 1 Replies View RelatedI have 2 wired desktops and 2 wireless laptops on a small network. Both desktops are running Windows 7. Laptops are with Vista. Everyone has internet accessFor some reason neither wired computer can see the other in the network places window. But both can see the wireless laptops. Network discovery and file sharing are all on and workgroup names are the same.
View 6 Replies View RelatedI HAVE TWO COMPUTERS running Windows Xp that are CONNECTED TO A ROUTER THEN CONNECTED TO A MODEM, COM1 THE INTERNET WORKS FINE, AND IS SHOWING A LAN CONNECTION WORKING, AND INTERNET GATEWAY CONNECTED, AND THE ROUTER SHOWS UP ON THE MY NETWORK PLACES. ALSO MY WIFI WORKS FINE TOO! BUT COM2 CANT SURF THE WEB, IT DOES NOT RECOGNIZE THE ROUTER IN MY NETWORK PLACES, AND THE INTERNET GATEWAY IS NOT SHOWING UP IN NETWORK CONNECTIONS, BUT THE LAN IS, AND IS SHOWING A CONNECTION. i have tried restarting everything, i tried connecting the COM2 straight to the modem, tried new either cables, nothing wrong with my service or modem or router, its just the COM2
View 7 Replies View Relatedmy network places on winXP is empty when i 'm in lan with 14other pc using a switch.
View 1 Replies View RelatedWorkgroup computers are not shown in my network place....
View 1 Replies View RelatedI cannot access Internal network to DMZ with public ip but i can access public servers in DMZ with External network.
View 1 Replies View RelatedI have a little problem here. I running on my computer (WinXP-SP3) Apache, MySQL, TeamSpeak3, etc.I setting up my router COMTREND Multi-DSL CPE to forward some needed ports to my computer (i use static IP) and it works fine. Anyone from the world can access to my TS3 and Webpage. I have already registered domain name for my Public IP, setting up DNS Server.I have internet access via router and i can connect on my TS3 server, webmail, etc.. ONLY through LOCALHOST. If i want connect via IP/domain_name i just stop on router WebAdmin. Can i access from MY computer to MY computer via public IP and through router?
View 1 Replies View RelatedI brought my desktop PC thinking their would be an ethernet port in the room but there isn't. I went out and bought a Belkin USB Wireless N150 network adapter and I download things at roughly 25kbps which just... sucks. I tried to ask the "tech guy" here what type of router they are using and he said "W-E-P" so I just said "okay" and walked away knowing that he barely speaks english. What can I do to get any more speed out of this? I don't know if it's a B, G, or N. If it's a G, would buying the N300 (i think it's "N+") or the N600 Dual Band work at all? What settings can I change? What can I buy?I've also got my Xbox 360 hooked into my PC via the ethernet port and shared the network connection with it to play Xbox Live, it's slow, but not unplayable.
MY PC SPECS:
3.2 intel core 2 duo (conroe)
asus p5q mobo
4gigs kingston
Windows Vista 64bit Ultimate
Will my Kindle be able to access public WIFI as in a WIFI enabled train or bus.
View 1 Replies View RelatedIs there any way we can assign or access multiple system with 1 public ip to save public ip's.
View 5 Replies View RelatedI am unable to view windows 7 HP systems in my network places on a windows server 2003 domain. How do I rectify this?
View 3 Replies View RelatedI'm not sure if this is even possible, but I'm currently changing from saving my documents on my desktop to a server. However, I like working with files from my desktop for ease of use. Is there any way to save a document in the server, while working with the document as it exists on my desktop (e.g. set the file up to save in two locations)?
View 1 Replies View RelatedHave found my self with Big signal loss in some parts of my house. I was recently given a Router and i thought i would use this as an acess point to extend / boost the range of the dead spots. I Then was looking on the Huawei's setting and switched off NAT and the Firewall and tried again.Both Plugged in and Wireless. I have seen a lot of threads on TalkTalk fourms of people doing this but none have the issue i am having.
View 3 Replies View RelatedI have a small business network computers w/a linux server. One computer was infected with viruses which I removed via kaspersky/norton/malware anti-bytes. I run windows xp professional on this computer.However I run into the following problem:
1) In my network places the documents on the server do not show as a network place-this is despite me being able to access these documents via a folder shortcut
2) After I open the network files/folders from the comp, I am unable to use the find feature because the folder is not listed under the look in drop box. I tried changing workgroups and ran into the same problem.
I am having trouble setting up mapped network drive or folder. My server and workstation are set up on a domain with windows server 2008 r2. The server only shows up on my workstation(windows 7) when I put in \server in the search. It pops up then on the left hand side but not in the main window. When I go back to my computer "map network drive" I hit browse and still the server does not show up under the network (but my computer does). When I try to do this on the server, I go to map network drive and nothing shows up under the network. I have even gone into group policies and mapped the drive that way and still nothing shows up.
View 1 Replies View RelatedI am seeing old entries of phantom folders in My Network Places in Windows 7. In XP you could just delete them, but there is no selection for this in Windows 7. How to delete them?
View 9 Replies View Related