I have 2 wired desktops and 2 wireless laptops on a small network. Both desktops are running Windows 7. Laptops are with Vista. Everyone has internet accessFor some reason neither wired computer can see the other in the network places window. But both can see the wireless laptops. Network discovery and file sharing are all on and workgroup names are the same.
View 6 RepliesI am unable to view windows 7 HP systems in my network places on a windows server 2003 domain. How do I rectify this?
View 3 Replies View Relatedlaptop running xp pro sp3 Pc running xp home sp3.After re-boot or re-start,can access my network places on the laptop.But only once.After,that,will not open my network places.I have tried to open/explore the folder with explorer,it will display contents but not open the shared file selected.The pc can display laptop's my network places folder,but will not open shared file on the laptop.
View 3 Replies View RelatedI HAVE TWO COMPUTERS running Windows Xp that are CONNECTED TO A ROUTER THEN CONNECTED TO A MODEM, COM1 THE INTERNET WORKS FINE, AND IS SHOWING A LAN CONNECTION WORKING, AND INTERNET GATEWAY CONNECTED, AND THE ROUTER SHOWS UP ON THE MY NETWORK PLACES. ALSO MY WIFI WORKS FINE TOO! BUT COM2 CANT SURF THE WEB, IT DOES NOT RECOGNIZE THE ROUTER IN MY NETWORK PLACES, AND THE INTERNET GATEWAY IS NOT SHOWING UP IN NETWORK CONNECTIONS, BUT THE LAN IS, AND IS SHOWING A CONNECTION. i have tried restarting everything, i tried connecting the COM2 straight to the modem, tried new either cables, nothing wrong with my service or modem or router, its just the COM2
View 7 Replies View Relatedmy network places on winXP is empty when i 'm in lan with 14other pc using a switch.
View 1 Replies View RelatedWorkgroup computers are not shown in my network place....
View 1 Replies View RelatedI have a small business network computers w/a linux server. One computer was infected with viruses which I removed via kaspersky/norton/malware anti-bytes. I run windows xp professional on this computer.However I run into the following problem:
1) In my network places the documents on the server do not show as a network place-this is despite me being able to access these documents via a folder shortcut
2) After I open the network files/folders from the comp, I am unable to use the find feature because the folder is not listed under the look in drop box. I tried changing workgroups and ran into the same problem.
I am having trouble setting up mapped network drive or folder. My server and workstation are set up on a domain with windows server 2008 r2. The server only shows up on my workstation(windows 7) when I put in \server in the search. It pops up then on the left hand side but not in the main window. When I go back to my computer "map network drive" I hit browse and still the server does not show up under the network (but my computer does). When I try to do this on the server, I go to map network drive and nothing shows up under the network. I have even gone into group policies and mapped the drive that way and still nothing shows up.
View 1 Replies View RelatedI am seeing old entries of phantom folders in My Network Places in Windows 7. In XP you could just delete them, but there is no selection for this in Windows 7. How to delete them?
View 9 Replies View RelatedI have been using FrontPage 2003 successfully and recently as of 2 days ago...I wanted to edit the website and the files are ALL missing. UGH!!!! Its very frustrating that I cannot edit the website now and we are missing valuable information. I did see the files when I created a new Network Place with the prefix but I cannot edit and save to our website. Now I did ask MyHosting administrator but they are seriously taking longer to get back to me then needed. I can open Front Page, but of course, cannot publish anything to the website. More so, even just opening the files in server.com is the actual issue because I cannot change the website page. That's the files I need to change in Front Page. I did go to my account settings within myhosting server to the File Manager and YES! I could see all the files....but again I cannot save anything to the website or publish..I DID NOT DOWNLOAD anything over the past few days and have not gone to unauthorized websites that would have provided a virus. Everything else works fine.
View 1 Replies View RelatedIn my computer. My network places properties did not see lan card.But the device manager lan card driver is enable but it did not appear in the my network place how it enable .
View 6 Replies View RelatedDesktop
Windows 7 64-bit -> cable directly to router
Laptop
Windows 7 64-bit -> wireless
Laptop
Windows 7 64-bit -> wireless
Playstation 3
-> Wireless
Xbox 360
LAN cable from router to 360
Scientific Atlanta 2203C modem to a Cisco Linksys E3000 wireless router.Ok, so if I turn everything on I can see all computers from all computers, but after a few hours/days (random time) everything disappears, and I have to unplug the router and then everything is back. Is there a way to stop this, and just have everything just be there all the time?
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJohn>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : John-PC
Primary Dns Suffix . . . . . . . :
[code]....
So I'm currently running window 7 on my msi GT683-R. As of yesterday my internet stopped working, however only on my msi. I'm currently typing this on a borrowed mac using the same network that doesn't work on the other device. It also works on my iPhone. The problem is, neither the wifi nor the wired works on my MSI. I made sure DHCP was on, ran a TCP/IP stack reset, a winsock reset, have restarted my computer/router multiple times, and disabled bonjour but nothing seems to work.
View 6 Replies View Relatedi am unable to connect to some lan computers in my office. when i go to start ---> Run ---> \192.168.0.24 or else...(lan computer ip) after 10/15 seconds a popup window comes and says (network path not found). but some systems i can easily access through this procedure
View 12 Replies View RelatedThis will be rather difficult as i'm on a cell phone. Anyways i'm unable to get my computer to recognize that an ethernet cable is connected. I know that the cable is good is i've used it with my girlfriends computer with on problems. I've blowed out the port, used two different cords. Apart from connecting to the internet (which i can't atm) i have no idea what to do.
View 12 Replies View RelatedI am unable to connect my computer to a wireless network.
View 2 Replies View RelatedI have a desktop computer which is connected to the router by cable, but when this computer is on I can't connect to the wireless network with any other devices.When I turn the main computer off though I can connect fine with any wireless device.
View 3 Replies View RelatedI recently entered the realm of wireless networking for my desktops and was able to connect my personal desktop successfully. Unfortunately, the other desktop I really need to make wireless is having difficulties. The computer never shows the message that a new device is discovered/installed. The adapter shows up under hardware devices and functioning properly but this is not the case. I installed the driver from the included CD but when I use Windows to troubleshoot, it says that the driver and adapter aren't working. When trying to set up a new network, I get a grayed-out wireless icon in the system tray and can't proceed. I disabled the firewall and antivirus so I could start over, uninstalling the driver, restarting and installing again.
View 12 Replies View RelatedI can't access anything on the network. The computer is a Dell running Windows Vista Home Premium. All attempts to access the network fail (ping, local shares, http) and other machines cannot access this one. Network & Sharing Center shows a fault between the Home Network and the internet, however I am unable to Ping or be Pinged by other computers on the Home Network. Other machines on the network are working fine both wired and wireless, although the machine in question is wired only (no wireless NIC).
The following items have been attempted, some many times, in no particular order, all producing no change in symptoms (not a complete list).
Network & Sharing diagnose & repair/reset NIC card.
Cold boot.
Last known good.
Safe mode with networking support.
Disable/stop all non-essential services & applications including firewall and antivirus.
Upgrade network drivers.
[code]...
my dad wants me to get on expanding our home network (getting wireless into other places in the house). i do consider myself pretty tech savvy ( i just built my computer from scratch) but this is a little bit beyond my comfort zone. the 4 ports on the router are keeping me tied up and the size and layout of the house are restricting the wireless range
provider: comcast cable
modem: arris TM502G (comcast provided)
router: linksys wireless-n wrt160n v3
4 pcs running windows xp to windows 7
3 laptops running xindows xp, windows 7 and windows 7 starter (netbook)
1 xbox 360
1 ps3
(looking to add netflix capable bluray players on 2 tvs in the future)
the downstairs layout (router is the star)
the upstairs (red is range of current setup thats a stretch) (blue wanted coverage)
not to scale and a quick draw the top half of the house is off set from the basement area. i used google earth to estimate the range from the router to the outside area of my wanted coverage area and its roughly 80 feet through 4 walls and the flooring i do not believe theres a single router capable of doing that without dropping some serious cash down.as is all the ports are currently tied up, and id like to expand the number of ports, along with getting wireless to the area i pointed out, i have the capability of pulling hard wire through out the house also.
how to link 3 different places where 2 of them have internet DSL connections.Actually Im running this layout...
Place 1:
DSL Modem connected to "Router 1" with DHCP Enabled. 192.168.1.1 and static IP assigned for every element in the network.
"Router 1" got this:
LAN:
2 computers
[code]....
At this point everything is working fine. Computers in "Place 1" can see computers in "Place 2" over network and share files and printers. Plus "Place 2" have internet from "Place 1".I want now to link "Place 2" to a "Place 3" using the same Nanostation M5 antennas and I can do it the same way I did Place1-Place2, BUT, what about "Place 3" router? it is connected to a DSL modem. "Router 3" should be DHCP Disabled too? What about the internet connection? I would like "Place 2" in the middle would be able to take the internet connection from both Place 1 - Place 3. It can be done keeping computers sharing files and folders between all 3 places?
I'm not sure if this is even possible, but I'm currently changing from saving my documents on my desktop to a server. However, I like working with files from my desktop for ease of use. Is there any way to save a document in the server, while working with the document as it exists on my desktop (e.g. set the file up to save in two locations)?
View 1 Replies View RelatedHave found my self with Big signal loss in some parts of my house. I was recently given a Router and i thought i would use this as an acess point to extend / boost the range of the dead spots. I Then was looking on the Huawei's setting and switched off NAT and the Firewall and tried again.Both Plugged in and Wireless. I have seen a lot of threads on TalkTalk fourms of people doing this but none have the issue i am having.
View 3 Replies View RelatedWhy I can't acces the internet in public places with my laptop.
View 1 Replies View RelatedI want to open a branch office but need to access the same server as in the main office.How do I do this without losing speed?
View 2 Replies View Relatedhow to share files between two computers in a two wide distance places?
View 2 Replies View Relatedhow to sending out the wireless network from computer A to computer B if we used a lan network to computer A
View 12 Replies View RelatedWe have a 2wire wireless router, for some reason only one computer can connect.
View 1 Replies View RelatedI have been stuck in a strange problems which happens occasionally--but too often to be ignored.I have a Windows 2003 Server running as a virtual machine via MS Virtual PC 2007. The host machine is a Windows 7 Home Premium 64-bit. This setup used to run fine where I had no issues accessing the guest OS (Win 2003). My development environment is Visual Studio 2005 and 2010 based, both running on the host machine.Some days ago I started working on a ASP .NET application which had a lots of files on the guest OS. That would cause the dreaded 'Network Bios Limit Reached' error in VS. So tweaked a few Registry keys on both host and guest and that problem went away. But then I started to get a new kind of problem: Occasionally, within VS 2010, I could not save files and that would be so bad that the entire guest OS cannot be browsed (but can be seen in the Network Neighborhood and be pinged as well).I have undone all Registry changes in both guest and host but I still see this problem. Only the virtual machine running Win 2003 is occasionally un-browseable but still ping-able by other intranet computers: Win xp, vista, Win 7 but cannot browse until the guest win 2003 is re-started.Is it some kind of network buffer being too full? So far I only see this problem when working inside Visual Studio 2010 but it could be happening elsewhere. The guest win 2003 is assigned a static ip of 192.168.1.7 by the router, btw.
View 8 Replies View RelatedThe computer that i am using which is on the LAN Setup. Also it is connected to the domain. Whenever i tried to log on to the computer it is giving me an error message that "The System could not log on the "Domain Name" either the connection is disconnected or the domain is no longer available" somting like that. When i remove the LAN Cable and if i enter the domain password, i can login to the computer. after i log on the computer if i connect the LAN Cable it is working fine. I can access the other computer which is connected to the same domain. Why the error message is poping up?
View 4 Replies View RelatedI seem to suddenly be completely unable to access the internet on my desktop computer.
View 14 Replies View RelatedI have a HP office jet 40vi printer that for the past several years has been connected to an XP networked computer and it has been shared for printing with other computers in my classroom. This summer the computer was switched with another XP networked computer.I installed the printer using the disk to the new computer, but I am unable to get the computer shared. When I try to share it and list it in the directory I get the following pop-up: Printer settings could not be saved.Operation could not be completed.
View 7 Replies View Relatedneed to know why I can not connect to the internet after I am done downloading windows Xp on my Desk top. I got an error message from the cmd, saying that computer is unable to contact DHCP server.
View 1 Replies View Related