I got a config of a SoHo96 router, which has an IPSec Tunnel configured. Now I need to understand what's configured there and it seems that the parameters that aren't being explicitly set, do not show up in the config. Thus, I have no clue about DH Groups, Keylife times and other nice things.How do I reveal the "missing" configuration items?
View 3 RepliesI am trying to chang IP configuraton for my Cisco 1140 AP, but in CLI I dont have a "config" command (i used en before to enable administrative mode)
Bellow are the commands I can see:
AP7081.0506.d54a#?
Exec commands:
cd Change current directory
[Code].....
After a abrupt power cylce of 6509 switch, vlan configuration got missing. Switch has not crashed.
View 4 Replies View RelatedI have several SG300-10 and SF302-08P switches running with L2-mode, and after I upgraded their firmware to 1.1.2.0, they began to record the following logs every one hour.
- Severity: Warning
- Description: %COPY-W-TRAP: The mirror-config file is illegal due to failure of previous copy operation/s to mirror-config.Also I found that I didn't see the Mirror Configuration file on the Configuration File Table in the Configuration Files Properties page.
Recently I came across a router (Cisco 3845, IOS 12.4) configured for TACACS, one local username and an enable password. Going through the configuration I noticed the router didn't have an enable secret password which I thought was strange. The TACACS config is below, comments regarding the TACACS config and the consequences of not having an enable secret or if there is a need for one.
aaa authentication login default group tacacs+ aaa authentication login no_tacacs enable aaa authorization exec default group tacacs+ aaa authorization commands 1 default group tacacs+ aaa authorization commands 15 default group tacacs+ aaa accounting exec default start-stop group tacacs+ aaa accounting commands 1 default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+
I need to create a Cisco VPN Client connection: I am following the cisco vpn client link and I don't have the command crypto isakmep client configuration group XXXXX
[URL]
This is what I get: crypto isakmp client configuration ? address-pool Set network address for client
This is my show version, if there is an IOS that will work:
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9S-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
[Code].....
I have on 3750X stack with a few vlan
--------------------------------------------------
vvlansw06# sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi1/0/6, Gi1/0/10, Gi2/0/5
Gi2/0/6, Gi2/0/37
10 LAN_10 active Gi1/0/16, Gi1/0/17, Gi1/0/19
[code]....
where are the others vlan?
I came across an interesting issue and thought I would see if anyone else has encountered it before contacting TAC.I have two Cisco Catalyst WS-4510R-E switches with a single Supervisor V module in each chassis. Both Sup cards are now running 12.2(54) SG1; ipbasek9 firmware; yes, I plan to move both switches to 15 code but that's another story. Anyways, prior to the upgrade the one switch was running 12.2 (33) code; I suspect the code was never upgraded; running ipbase non - K9 code. The other switch was running 12.2(44) with K9 prior to upgrade to 12.2(54).
View 2 Replies View RelatedI have two Cisco Catalyst WS-4510R-E switches with a single Supervisor V module in each chassis. Both Sup cards are now running 12.2(54) SG1; ipbasek9 firmware; yes, I plan to move both switches to 15 code but that's another story. Anyways, prior to the upgrade the one switch was running 12.2 (33) code; I suspect the code was never upgraded; running ipbase non - K9 code. The other switch was running 12.2(44) with K9 prior to upgrade to 12.2(54). With the background set, one switch reports the following:SwitchA (config)#r?radius-server redundancy regexp represourc rmon route-map router.
View 4 Replies View Relatedin my run promt i can only run cmd.other commands are not worked
View 1 Replies View RelatedI'm in need of a device which can switch to several items which has the same mac address. I heard that there may be devices that can handle this, by for example mapping fake unique mac addresses in the switch to each on of the same mac addresses on the devices, so when you try to send something to a "device with the same mac address" you send it to the faked address in the switch and the switch just forwards it.
View 1 Replies View RelatedHow do I audit a network PC to see what it has on it or delete what does not need to be there. If I do it through the Windows add or remove they re-install. In the old days I could do it in DOS and then 'Tree' to list the properties and then delete what I wanted permanently.
View 1 Replies View RelatedI'm in need of a device which can switch to several items which has the same mac address. I heard that there may be devices that can handle this, by for example mapping fake unique mac addresses in the switch to each on of the same mac addresses on the devices, so when you try to send something to a "device with the same mac address" you send it to the faked address in the switch and the switch just forwards it.
View 1 Replies View RelatedI am seeing old entries of phantom folders in My Network Places in Windows 7. In XP you could just delete them, but there is no selection for this in Windows 7. How to delete them?
View 9 Replies View RelatedI know its probably got something to do with EIGRP no auto-summary, I was wondering if I could get some input as to why a route would change from being variably subnetted, which is usually the case until no auto-summary is deployed. Or am I totally lost? I attached a screen shot for a closer observation.
View 1 Replies View Relatedive got 2 laptops on my wireless network and have just bought a pc. it dosnt seem to be finding my connection so i cannot get it onto my wireless network?
View 1 Replies View RelatedI reset my Dlink 615 wireless router. I held down the power and reset for 30 seconds and rebooting the system with the disc. I did change the router name, but believe everything else stayed the same. My desk top is working fine being "hardwired" but nothing wireless will connect.
I did see this time it installed Network Magic which I have since uninstalled and again rebooted the computer system and still cannot get the wireless to work. It shows the network available, but my password for some reason does not take.
We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies View Related We use all Cisco router in our business mostly 1841 and 871. But now i'm currently working with a new router:
Just purchased last week - Cisco 881
The Cisco IOS is:
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.0(1)M6, RELEASE SOFTWARE (fc1)
->System image file is "flash:c880data-universalk9-mz.150-1.M6.bin"
As all our router are Cisco we use EIGRP as our routing protocal. But with this router all I see is:
#router ?
odr On Demand stub Routes
rip Routing Information Protocol (RIP)
Where is my EIGRP ? I can't configure eigrp, so my router wont be doing much routing.
I recently moved to another room as I was removing my router I removed some tape unbeknown to me it also removed my MAC Number. Is there anyway I can recover that Mac Number?
View 1 Replies View RelatedI have configured my ASA5520 to act as VPN server. It accepts connections from the internet and then it authenticates the user to a Windows 2008 Server via Radius.Everything works fine if I use the VPN client embedded in Microsoft Windows. Conversely, if I try to configure Cisco VPN Client, I cannot find where to define the PSK string.
View 3 Replies View RelatedI have two 1841 routers running different IOS versions:R1 running 15.0(1)M3 Advanced IP ServicesR2 running 15.1(4)M2 Advanced IP Services R1 supports the encapsulation dot1q second-dot1q on FastEthernet subinterfaces. Surprisingly, R2 with the newer IOS (of the same feature set) does not have the second-dot1q command option. I've done my Feature Navigator homework but I did not see any significant differences between these two IOS versions that would explain why the second-dot1q command is not available on R2. Am I missing something? Has the syntax changed, or a different feature set is needed for 15.1M and higher to get the second-dot1q command back?
View 2 Replies View RelatedI am trying to run the following commands on a 2801 router, but the commands are missing:
mls qos
mls qos map cos-dscp 0 8 16 40 32 46 48 56
The only QoS command i have in global config is (no MLS qos) :
REMOTE-ROUTER1(config)#qos ?
restore-show-output Restore old show output
shape-timer Set the HQF shape timer interval
The router is running IOS:
System image file is "flash:c2801-ipbasek9-mz.151-4.M5.bin"
Am i just running the incorrect IOS or am i missing somehting, i need to change the QoS Map for my Nortel VoIP. The VoIP phones connect to a 3750 PoE which used to conenct to a 2651XM to route VoIP and data traffic over the same copper pairs (WAN link to hub site) hence the need for a Service policy but being Nortel phones, require changing the cos-dscp map. the 2801 is going to replace the 2651XM using a new HWIC.
I just got a new WIsm2 to work and I'm missing the second controller on a 6500 the session slot 12 processor 1 comand brings me to the logon screen. but session slot 12 processor 2 ends with an Error, Am I right that the new wism2 has/is only one controller other than the 'old' wism which has processor 1 and 2 ?
View 4 Replies View Relatedtoday I received a Cisco Router 881G with PCEX-3G-HSPA-G for a customer that ordered a Router with the feature to send/receive SMS and to remotely active the 3G Internet connection through SMS. I believe that the router that meets this requirement is the Router 881G that I received today. In particular, the model is:
CISCO881G-K9
Now, I installed the router and configured the 3G link that is working properly BUT all the commands related to the SMS are completely missing. In particular, I miss the command:
cellular gsm sms send
gsm sms archive path
In the following documentation I see that these commands should be available: [URL]The fact that these commands are missing sounds very strange to me since the documentation is pretty clear. Do I need to activate any license? I also upgraded tha router to the last version...
Here it is the show version of the Router:
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Sat 24-Mar-12 00:00 by prod_rel_team
ROM: System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
[code]....
My company is moving the datacenter to our new building on Saturday, however the users will remain at the old building until late next month so they bought a 100M Metro E VPLS circuit through their ISP. I went to test it today but could not ping the workstation from my laptop. I wanted to do some bandwidth testing with iperf but could never get to that point because ICMP connectivity wasn't even there. From what I understand, VPLS is just a layer 2 extension so they way I'm testing the circuit below SHOULD work, but it isn't. Spoke with the ISP and they tested the circuit end-to-end on their equipment which was fine so am I missing something?
View 18 Replies View RelatedOur church computer isp is WildBlue.They tested the satellite connection as well as the modem.Everything is fine from that end, however, I get a 'server not found' error message.I was told by WildBlue that they cannot see an ip address for the computer. How do I fix this so that we can have the internet back? The computer has WIN XP.
View 3 Replies View RelatedI have just noticed that both drives are missing. How to get them back I am on windows xp.
View 2 Replies View RelatedHow do i setup my d link dwl 2100 ap at my new address. I have moved and my installation cd has gone missing. The install wizard wants to work off the cd
View 2 Replies View RelatedThere is NO connection although Belkin Wireless Adaptor is blinking to catch signal.Whenever there is no connection, I need to click Belkins Utility at System tray at the bottom in order to get connection, however it does not keep connected and lasts only 10-20 minutes.Besides this, I found when I clicked, icon of Belkin > Properties > Network and found there is no 'Use Windows to configure my wireless network settings.
View 7 Replies View RelatedI'm reading the SWITCH OCG for the second time now, and I noticed page 210 is completely missing: it's a duplicate of page 212. I'm still wondering why I didn't see it the first time I read it.
View 8 Replies View RelatedI am capturing at 2 different locations and I need to find packets that are getting dropped between the 2.
I have done all the merging and everything needed for this in wireshark but because the mac address changes 1/2 way to me all the packets are coming up as lost
is there anyway to remove the MAC address from the captures or as a field it looks at?
I have a stack of 3750's running IOS 12.2(25). "IP forward-protocal" command is configured, but the IP helper command is just not an option to put on an interface. Any have any idea of why that could be?
View 2 Replies View Related