Adding Additional Items To Existing Wireless Network?
Feb 17, 2011ive got 2 laptops on my wireless network and have just bought a pc. it dosnt seem to be finding my connection so i cannot get it onto my wireless network?
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: 4402 - Adding Additional Apps To Working Mesh Network
Nov 19, 2012We need to add additional APs to working wireless mesh network (WLC 4402, 1520 series AP).
WLC 4402 supports 1550 series access points with firmware upgrade to 7.0.235.0 :
[URL]
Is AIR-CAP1552E-x-K9 with three external dual band antennas enough for 2-GHz b/g/n local access and 5-Ghz back haul?
Does 1552 Mesh AP work with 1522 Root AP?
Routers / Switches :: Adding A Wireless Conection To Existing Network
Dec 22, 2011Add wireless conection that can't see network. I have an existing working hard wired network. I want to add a wireless connection that has access to the internet, but not to the other devices on the original network.
View 2 Replies View RelatedCisco Wireless :: Adding 1600 To Existing 1200 AP Network?
Apr 1, 2013I have a Airnet 1600 Series that I want to add as another repeater to our 1200 series 802.11g network. We already have 2 AP's running fine as Repeater and BR, I just need to a this 1600 AP to the existing wirelss. Everytime I try to change the 1600ap as a repeater, I get the below error.
cannot set role in radio network to when another radio is set to one of the above roles
Netgear WNDR4500 - Adding Wireless Router To Existing Network?
Sep 23, 2012Added a wireless router to our office here so that people with laptops could get on the net without having to physically plug in. Right now it is ok, but the router is acting as it's own DHCP server instead of our server here assigning out the IP's.
The main gripe I have is I can only login to the router through my phone and not through my computer. How can I achieve this. We have multiple offices that all connect through a VPN. I would like our sys admin to access the router at his location as well.
Do I just turn off DHCP on the router and thats it? The model is Netgear WNDR4500.
Linksys Wireless Router :: WRT400N - Adding Access Point To Existing Network
Oct 26, 2010I have an existing wireless network using a Cisco/Linksys WRT400N wireless router (which in turn is connected to a cable internet provider). I need to extend my wireless coverage and so purchased a Cisco/Linksys E1000 to act as an additional access point. Purchased from BB, the local 'geek squad' rep instructed me to follow the users guide for the set up. After login into the admin service on my E1000, I followed the 'Advanced Routing' instructions and disabled the 'NAT' option and subsequently enabled the 'Dynamic Routing (RIP)' option. Everything worked like a charm to this point, but now I'm stuck. What steps do I need to follow to allow clients to log onto my wirelss network via the E1000 (secondary access point)? I've established WEP security keys on the WRT400N (primary access point) and want to use the same network security parameters on the E1000.
View 9 Replies View RelatedAdding Two WLAN Access Points To Existing Network?
Apr 11, 2012Here's the deal. My internet provider provided me with a shitty router with a lot of settings locked. I can't change DHCP settings or add custom static IP addresses. This sucks. The wireless function on it sucks also.I added an extra router to the network so I have good Wifi in my living room. I turned off the NAT, firewall and DHCP on that one, so it's a simple switch with a wireless access point now.Now here's the deal. The DHCP server of the provider's router hands out IP's from 192.168.2.1 to 192.168.2.253 (192.168.2.254 is the router's own IP address).I gave the added switch/access point the IP address 192.168.1.1 in its own settings. The original router doesn't 'see' the switch now anymore because it's out of the DHCP's range. When I gave it an IP address within the DHCP's IP range, I got all kinds of conflicts (as expected).
I guess this is a solution since it works, but I'm open to other suggestions since it doesn't seem to be the best way of doing things. Besides, I can't access the access point's web interface anymore since it doesn't have an IP address within the network now. It isn't important because I don't need to change any settings anymore, but still.I'm going to add a second wireless router to replace the built-in wireless function of the provider's router. For some reason it sees its own wireless network as a separate network or something. When I roam from the new access point wifi to the provider router's wifi, everything gets confused because it tries to give the laptop a new IP address.
Adding Security Code To Existing Network Windows 7?
Mar 28, 2012I have an existing wireless working network with WIN 7 - 2 laptops, two desktop PC's. Can I add a security code/password without setting up a new network?
View 1 Replies View RelatedCisco VPN :: ASA5520 - Adding New Network To Existing Tunnel
Apr 10, 2012We have an ASA5520 version 8.3(1) We have an existing VPN tunnel between us and our partner site. We need to add a new vlan to our existing VPN tunnel.
Where do we need to add the new vlan to in ASDM interface? Looking through using ASDM, I found 3 places.
Site-to-Site VPN:
1) Connection profiles
2) Advanced > crypto maps
3) ACL Manager
Cisco Wireless :: 5500 - Adding Additional SSID To WLAN
Oct 21, 2012We have a CISCO WLAN in place with several SSIDs including one on the Voice VLAN. We need to add an additional one using CCKM due to wireless phone roaming issues. Does adding a new SSID to the WLAN cause any outage whatsoever? We are in an environment where even a small amount down time is not acceptable.
We are using two 5500 controllers with hundreds of LAP1142N
Cisco Wireless :: Adding Additional Dhcp Scopes To A 5508 Controller?
Jan 31, 2012I have two 5508 controllers configured with an internal dhcp scope. The scopes on each controller are a /22. I need to expand the scope to provide more addresses. Is there an easy way to add a second dhcp scope without making changes to the existing scope? If so how will the clients devices be able to access that ip address range?
View 1 Replies View RelatedCisco Security :: Add Additional CAS To Existing NAC OOB Deployment 4.7.3
Apr 10, 2011If I am to add the Self-generated certificate of my new CAS to my existing CAM's trusted certificate authorities list, will it just be added or will it replace the existing trusted certificate?
View 4 Replies View RelatedAdding Wireless AP To Existing Wired Lan?
Feb 4, 2013I currently have a wired network which starts with a cable router downstairs which is a virgin media netgear box with firewall and DHCP turned on. I have a NAS server and a smart tv which run off ethernet connections to this router.then have a cable run upstairs to a TPlink gigabit switch which is connected to a PC and a printer (in my study). All this works just fine, no configuration needed.I have a TPlink wireless router, a TL-WR743ND. I want to use this to connect to the switch upstairs (not downstairs - my stone walls limit any wireless access point) to provide wireless network coverage for my house.So I figured I should configure it with a dynamic IP address (ie it gets it from the netgear DHCP), turn off the TPLink's DHCP and firewall, and then any wireless devices attached to the TPLink by wireless should have access to printer and NAS
View 8 Replies View RelatedBroadband :: Adding WAP To Existing Wireless Router?
Oct 5, 2012My ISP comes in via phone line to modem then to wireless router.I want to run 200' direct burial line to WAP so that I can access wireless internet at the far point. I have modem and wireless router. what do I need to do the create the distant wireless access?
View 2 Replies View RelatedAdding Wireless Router To Existing (wired)?
Feb 11, 2011My wife has a home office with her office computer connected to our modem via a cisco router. Our home computer is connected via this router as well. I want to add a wireless router (netgear) so I can use my laptop anywhere in the house.
View 1 Replies View RelatedCisco Infrastructure :: 7206VXR / Add Additional Gigabit Ports With Existing Hardware
Aug 15, 2012how many Gigabit port will be supported by Cisco 7206VXR with G1 engine model. By deault we hot 3 GE, is it possible to add additional Gigabit ports with the existing hardware.
View 3 Replies View RelatedCisco :: 4500 Adding Additional Module?
Jul 28, 2012Im wanting to add an additional module in to my Cisco 4500. Is as simple as plug and play or is there some commands that I need to add or anything I should be aware of.
View 2 Replies View RelatedCisco Wireless :: 4402 Adding New Subnet To Existing WLAN
Nov 23, 2012Moblie WLAN range 192.168.1.0/24.Default Gateway: 192.168.1.1 - Firewall..Next available range to add more addresses are 192.168.11.0/24..Current range is having IP address issues..I have seen a feature in 4402 controller that I can assigne second address range to exisgint SSID Mobile.What should I set the default gateway for 192.168.11.0/24 range?How can I point all mobile users traffic to the firewall as default gateway without creating additional interface on the firewall?I really do not want to create another vlan and interface in the network to just add another 255 addresses if tehre is any option?
View 3 Replies View RelatedLinksys Wireless Router :: Adding New E2500 Dual Band To Existing WRT160N?
Sep 25, 2011Too many devices in our home including two playstations and 4 computers. I want to add a Linksys dual band E2500 to my existing WRT160N.
1. I will be able to hard wire the two together too.
2. Which Linksys router should I connect to my cable modem?
Cisco Switching/Routing :: 3750G - Adding Additional Switch And Making It Stack
Feb 29, 2012I currently have Cisco 3750G which is currently live and active and fully populated and only have remote access.
I have an additional same switch which I would like to stack. My initial plans were to have 2 GIbit etherchannels, but I came across the option to Stacks both switch with each other.
When I do a show switch on the live switch its set as a Member: [code]
I would like to add the new switch to the stack without losing the config for the switch which is live. I understand that the highest priority of the switches becomes the Master but as the live switch is Priority 1, would chancing this affect the switches config, or would it lose connection at all?
Also when I plug in the new switch and it reboot how do I ensure it becomes the slave without rebooting the live switch?The cables on the switch do they have to go to port1 on the live switch and port 1 on the new switch or can they be port 1 and port 2?
D-Link DIR-615 :: Cannot Get Wireless Items To Connect / Says Unable To Join Network
Apr 14, 2012I reset my Dlink 615 wireless router. I held down the power and reset for 30 seconds and rebooting the system with the disc. I did change the router name, but believe everything else stayed the same. My desk top is working fine being "hardwired" but nothing wireless will connect.
I did see this time it installed Network Magic which I have since uninstalled and again rebooted the computer system and still cannot get the wireless to work. It shows the network available, but my password for some reason does not take.
Adding Another Computer To Existing Router Hookup?
Nov 24, 2012I am trying to hook a second computer up to run off my belkin router?
View 1 Replies View RelatedCisco WAN :: Adding MPLS With 1841 To Existing 5505
Aug 28, 2011We currently have out T1 attached to a 5505. We have IPsec site to site tunnels that also terminate on the outside interface of the 5505.
We are getting rid of the T1 and bringing in a manged MPLS circuit which will run off of a 1841 ISR. I would like the 5505 to pretty much work as is with little change. Whats the easiest way to accomplish this? Of course the MPLS will come with new external IP.
Current Design ---> T1<------>[asa5505]<------->[LAN]
New design---------> Mpls<------->[1841]<------>[asa 5505]<------->[LAN]
Questions:
1. Whats the easiest way to drop in the 1841 without having to change all my ASA acl's.
2. How would I terminate my ipsec site to site tunnels on asa outside interface. Now that the WAN interface is on 1841 and not ASA how would I terminate the other side of tunnel? Can I leave my tunnel end points on ASA or do they now have to terminate on 1841?
3. How would I configue outside interface on ASA to communicate out 1841 MPLS?
Cisco WAN :: Adding Another 3800 Router To An Existing Setup?
Feb 26, 2013I have a working 3800 router which runs on bgp pretty well. Existing setup has 2 serial ports for the bgp and 1 gigabit port for the LAN.Now, i want to add another 3800 as a standby router making it clustered - ACTIVE/STANDBY via hsrp protocol.
1.) What are the implications in adding another 3800. Do i need to reconfigure the ip addresses on my serial? or just the LAN
2.) Are there any additional requirements like firmware versions etc?
Cisco Switching/Routing :: Adding N5K To Existing Core
Mar 3, 2013I need your input on how to appropriately introduce an N5K with Jumbo enanbled to a prexisting Core Network (Stack of Cisco 3750G Switches) without making any major alteration on the Core configs (everything is happy). The idea is to move two High I/O servers to the N5K during a transitional phase. I already have a fair understanding of what Jumbo-Frames are and what it does. Keep Jumbo-Frames within the N5K ONLY.
Conditions:
- Traffic is Data traffic, not storage/iSCSI
- The servers host our ERP applications and MySQL that is accessed heavily by users
- N5K to C3750G connectivity is a Port-Channel consisting of 4x1GB ports
- The servers are to remain on VLAN 2 (Data VLAN)
- The Core Switch is L3 and the boundaries reside here
Cisco WAN :: 7010 Adding Or Removing Vlan On Existing VPC
Feb 16, 2010we have 2xNexus model 7010 (let's call them Nexus1 and Nexus2) connected via VPC to a couple of catalyst 6509 switch.Trunking has been enabled on the port-channel defined on both Nexus allowing some vlans.Below the config applied on both port-channel interfaces on both Nexus which are members of the same VPC number: [code]
supposing I'd need to remove some vlans from that trunk (e.g. vlan 100,200 and 300) using command "switchport trunk allowed vlan remove 100,200,300" and that I'll run that command on Nexus at a time (that means there'll be a condition for a short period of time where Nexus1 has removed vlan 100,200 and 300 from the trunk, while Nexus2 is still carrying those 3 vlans on its port-channel which is a VPC member) , could it cause any VPC inconsistency condition suspending VPC interfaces and therefore affecting the service for all remaining Vlans or only Vlan 100, 200 and 300 will be suspended when that condition will be detected?
Cisco VPN :: 3845 - Adding Second VPN Peer To Existing Tunnel?
Aug 26, 2012We have a Cisco 3845 router for Site 2 Site VPN tunnels to external business partners. The IOS is (C3845-ADVIPSERVICESK9-M), Version 12.4(15)T8.One of our partners is doing a DR test and needs to have us swing the VPN traffic to another peer in a test location temporarily. I plan on adding the test hosts to our existing encryption ACL, but instead of building another crypto map, I was wondering if I can add a secondary peer to the existing one?
View 3 Replies View RelatedCisco Switching/Routing :: Adding Two 2960S To Existing Stack
Oct 1, 2012I need to add two additional 2960S switches to my stack. I saw a diagram that showed how a 4 switch stack can be connected, but I couldn't find much detail on adding a switch to an existing stack (besides master election). The output below shows how the existing stack is connected and its state
SW#sh switch detail
Switch/Stack Mac Address : 0011.2222.3333
H/W Current
[Code].....
I will need to break one of the stack rings between SW1 and SW2 in order to connect the new switches. Does it really matter which ring I break to connect the additional switches? Does one ring act as primary? If so, I'd rather not break that ring so this process is transparent as possible. Also, is there any benefit to disabling the stack port vs just disconnecting the cable?
Cisco Infrastructure :: 3750 - Adding Second Low Budget ISP To Existing Internet
Nov 14, 2012I have a 3750 stack as our core switch. On the core switch I have 2 VLANs. One VLAN is for WAN and one is for LAN. The WAN VLAN has our internet router, and the outside interfaces of two ASA's set up as failover. The LAN VLAN has everything else, including our MPLS router for the remote offices. Execs are cheap and want to increase internet bandwidth by purchasing a local home internet service like COX or Time Warner cable to add to our Business internet service with TelePacific which is a bonded T1 at 3 meg. Execs dont seem to care about SLA's and simply will not spend big dollars to increase the pipe. I was looking at those Mushroom Networks appliances but its too expensive for us also. Any way to add additional low cost bandwidth with out current setup? Maybe prefer to keep important internet traffic to the SLA circuit, and then put low priority traffic to the cheap non SLA cable modem if possible.
View 5 Replies View RelatedLinksys Wireless Router :: Adding E1000 To Existing Router?
Nov 10, 2011I have an E1000 router and recently moved to a basement apartment where the only internet access comes from a single Ethernet cable running out of a router upstairs. I can connect to that network (it is family) but ideally I would like to connect my router and create a second network so that I can connect my printer and other devices independently of the upstairs network.
View 2 Replies View RelatedCisco Switching/Routing :: Adding A New Switch In Existing Two 3750 Stack
Mar 25, 2012in our network we were using three 3750-48-s switches with stacking one of the switch due to some hardware failure power problem,
now i want to add a new switch 3750-48-s in the existing Stack two switches , the old two switches ios version is = 12.2(25r)SEC the new Catalyst 3750 io verion is = 12.2(35)SE5
how to add this switch in the existing two stack switches , with documentation
Cisco Switching/Routing :: Adding 3750 Switch To Existing Stack?
Nov 23, 2011I am looking to add a new 3750 Switcch to an existing stack shown below
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3750-24P 12.2(35)SE5 C3750-IPBASE-M
2 26 WS-C3750-24P 12.2(35)SE5 C3750-IPBASE-M
3 26 WS-C3750-24P 12.2(35)SE5 C3750-IPBASE-M
[code]....
I have looked on notes to add a switch to an existing stack and haven’t identified answers on how the IOS will be affected on the new switch – will it downgrade to the current stack version or will the current stack upgrade to its version. At this moment in time I would prefer if the new switch IOS downgraded to the current stack IOS version.The new switch is a 3750V2 – will this affect how it joins the stack?The new switch has the image of IPBASEK9-M – again will this affect how it joins the stack?
Cisco Switching/Routing :: Adding 2960s To Existing Stack Of Two POE Switches
Feb 27, 2013I have to add a 2960s PoE switch to an existing stack of two 2960s PoE switches. If The new switch has no configuration on it and the existing stack is broken by pulling te stack cables and then new cables are added and everything re-cabled correctly will the new switch assume the configuration from the stack without any issues?
View 10 Replies View Related