Cisco :: 4500 Adding Additional Module?
Jul 28, 2012Im wanting to add an additional module in to my Cisco 4500. Is as simple as plug and play or is there some commands that I need to add or anything I should be aware of.
View 2 Replies
ADVERTISEMENT
Adding Additional Items To Existing Wireless Network?
Feb 17, 2011ive got 2 laptops on my wireless network and have just bought a pc. it dosnt seem to be finding my connection so i cannot get it onto my wireless network?
View 1 Replies View RelatedCisco Wireless :: 5500 - Adding Additional SSID To WLAN
Oct 21, 2012We have a CISCO WLAN in place with several SSIDs including one on the Voice VLAN. We need to add an additional one using CCKM due to wireless phone roaming issues. Does adding a new SSID to the WLAN cause any outage whatsoever? We are in an environment where even a small amount down time is not acceptable.
We are using two 5500 controllers with hundreds of LAP1142N
Cisco Wireless :: Adding Additional Dhcp Scopes To A 5508 Controller?
Jan 31, 2012I have two 5508 controllers configured with an internal dhcp scope. The scopes on each controller are a /22. I need to expand the scope to provide more addresses. Is there an easy way to add a second dhcp scope without making changes to the existing scope? If so how will the clients devices be able to access that ip address range?
View 1 Replies View RelatedCisco Wireless :: 4402 - Adding Additional Apps To Working Mesh Network
Nov 19, 2012We need to add additional APs to working wireless mesh network (WLC 4402, 1520 series AP).
WLC 4402 supports 1550 series access points with firmware upgrade to 7.0.235.0 :
[URL]
Is AIR-CAP1552E-x-K9 with three external dual band antennas enough for 2-GHz b/g/n local access and 5-Ghz back haul?
Does 1552 Mesh AP work with 1522 Root AP?
Cisco Switching/Routing :: 3750G - Adding Additional Switch And Making It Stack
Feb 29, 2012I currently have Cisco 3750G which is currently live and active and fully populated and only have remote access.
I have an additional same switch which I would like to stack. My initial plans were to have 2 GIbit etherchannels, but I came across the option to Stacks both switch with each other.
When I do a show switch on the live switch its set as a Member: [code]
I would like to add the new switch to the stack without losing the config for the switch which is live. I understand that the highest priority of the switches becomes the Master but as the live switch is Priority 1, would chancing this affect the switches config, or would it lose connection at all?
Also when I plug in the new switch and it reboot how do I ensure it becomes the slave without rebooting the live switch?The cables on the switch do they have to go to port1 on the live switch and port 1 on the new switch or can they be port 1 and port 2?
Cisco :: 4500 Interfaces Utilization Over 6500NAM Module
Jan 23, 2012I have cat4500 swtiches & need to monitor interface bandwidth utilization over NAM installed 6500 chassis. How can I monitor traffic utilization over NAM like we do in PRTG/MRTG/Cacti ?
View 0 Replies View RelatedCisco Switching/Routing :: Faulty State In New Module Inserted In 4500
May 18, 2010We inserted a new module with 48 rj45 ports in a 4500 with just one supervisor module. We have two 4500, and we tried the new model in the other 4500 and it´s working properly and giving a OK status. Furthermore, the module´s LED status is green. We saw that there are 8 ports (from 17 to 24) that are in faulty state, so probably this is the cause for the faulty state for the module.
We tried already a Hw reset, replace/insert again the module...
We are almost sure that it can be a Hw failure. We are getting the following results different commands:
show module :
Mod Ports Card Type Model Serial No.
7 48 10/100/1000BaseT (RJ45) WS-X4548-GB-RJ45 JAXXXXXXXH
M MAC addresses Hw Fw Sw Status
[Code].....
Cisco Switching/Routing :: 4500 24-port Gigabit Module Being Picky
Jan 7, 2013We have recently purchased a Cisco 4506 that has several Gigabit Ethernet modules installed.One of the Ethernet Gigabit modules - a WS-X4424-GB-RJ45 - is being picky with who it talks to at Gigabit Ethernet.
If I plug a laptop into one of it's RJ45 ports using a Cat 6 cable, nothing happens. No link light, no notification of link up or down on port statistics, absolutely nothing.If I plug a server into the same port it works fine at Gigabit Ethernet (even using the same Cat 6 cable).I can get the module to recognize a laptop if I fix the speed/duplex on the laptop to 100Mb/Full. I have tried this with other staff laptops from different vendors (HP / Dell / etc.) all with the same result.
The module directly underneath this module - a WS-X4448-GB-RJ45 - works fine for both laptops and servers. We have tried swapping the module positions but to no avail.
Cisco Switching/Routing :: Configuration Module Supervisor Switch Catalyst 4500
Jun 4, 2012switch catalyst 4500 with ios cat4500e-universal.SPA.03.02.00.XO.150-2.XO.bin. I need to configure modules 3 and 4 of supervision, the problem is that I need the 4-port module 3 are active but only the first turn on both the module 3 and the first port on the module 4. [code]
View 1 Replies View RelatedCisco Switching/Routing :: 2811 - Adding Network Module
Dec 14, 2011i have question about router 2811, for now, all HWIC in 2811 is full,
Slot 0 : VIC2-2E/M
Slot 1 : VIC2-2E/M
Slot 2 : WIC-1T=
Slot 3 : HWIC-1FE
But we need add more 2 module VIC3-2E/M. can we use Network Module ? example : add one NM-HD-2V + two VIC3-2E/M ?
Can we do that? and whether it is the same as we use the VIC2-2E / M on HWIC slots
Cisco Switching/Routing :: Adding N7KM132XP-12 Module To Nexus 7K Switch
Jul 31, 2012Trying to find some documentation as to whether there are any other steps for inserting this new module in our N7K. We have 2 blades in already and 2 Sups in 5 & 6. I'm assuming its like the 6500s, where we just slide it in and the OS configures the global parms for it and the default VLAN.
View 2 Replies View RelatedCisco WAN :: 881W Doesn't Allow Logon To AP Module Even After Adding Correct Credential
Mar 18, 2011I'm having issue with 881W router. this router doesnt let me logon to it after I restart the router and enter correct credentials. after being at the router - it doesn't let me logon to its AP module even after adding correct credentials. I've changed 2 routers so far but see same issue.
try to setup up credentials using: username <username> privilege 15 secret 0 <password> or username <username> priviledge 15 password 0 <password>
Cisco :: Setting Up Additional 1142 AP
Jan 18, 2012I am in the process of deploying an additional Cisco 1142 AP into my network. I would like to set it up to be the same SSID as the first one, and be able to have laptops roam from AP to AP. I am simply trying to expand the current coverage of my wireless network. I have both APs mounted and access to both.
-CISCOAP01 - 192.168.2.2
-CISCOAP02 - 192.168.2.3
What do I need to do (configre) to make this happen? I am rather new with Cicso. I am using the web interface to setup the APs. The first one has been up and running for about a year now with no problems. [code]
Cisco WAN :: PIX 520 To Add Another Eth3 Card To Use For Additional IP Range
Aug 2, 2011I have an existing external IP block on eth1 which is working fine. I have another eth3 card which I want to use for my additional IP range.So my ISP gave me a new /27 block is addition to what I have now. This block is supposily active and nothing is needed to configure on the ISP router, it is said that it is autmatically available and ready to use once I configure my PIX.I am using the PIX GUI and running into an error while trying to create a NAT pool "Start and end addresses overlap with existing range"
View 53 Replies View RelatedCisco Wireless :: WAP4410N Cannot Add Additional SSIDs
Mar 29, 2012I want to split the usage of the AP so that visitors are on their own wireless connnection and VLAN.We have 2 WAP4410N APs. One AP acts as a repeater for the another AP.They are both in 4.0.4.2 firmware.We are using WPA2 RADIUS authentication, and would like for visitors to use WPA2 PSK. Under Wireless tab, I have 1 SSID, but the other 3 available boxes for SSIDs are greyed out.When I click in them, they will not allow me to type an ID.I watched a video of how to add SSIDs and VLANs, and it looked simple enough.He just clicked in the box and was able to add more IDs.Could my current config be preventing me from adding additional SSIDs?
View 6 Replies View RelatedCisco Wireless :: Setting Up Additional 1142 AP?
Jul 27, 2011I recently purchased another 1142 AP to expand out our current wireless infrastructure, my question is, what exactly needs to be done for this to work so that users can roam freely and auto-connect to the closet AP with the best connection without getting disconnected?
I have set all the settings the exact same on the new AP to match the existing AP. (How to save the configs into a file would be great, I am not sure how to do that)... But anyhow, before I launch it, I would like to be sure I am correct so I do not bring down the existing network. Of course, the only difference between the 2 are the IP addresses. AP1 is 192.168.2.2 and AP2 is 192.168.2.3
All computers are using Linksys Wireless-N cards.
Cisco VPN :: ASA 5505 - Add Another L2L Configuration For Additional Peer?
Feb 13, 2011I confgured one L2L VPN on my ASA 5505.
How to add another L2L configuration for an additional peer ?
Cisco Security :: Add Additional CAS To Existing NAC OOB Deployment 4.7.3
Apr 10, 2011If I am to add the Self-generated certificate of my new CAS to my existing CAM's trusted certificate authorities list, will it just be added or will it replace the existing trusted certificate?
View 4 Replies View RelatedWhat Are Additional IP Address In Leased Line
Mar 31, 2011my company has a 4mbps leased line from TTSL . we are getting 2 WAN IP and 2 LAN IP. in Addition we are also getting 12 additional IPs .-what is additional IP, their uses?-how are the 2 wan ips configured? & how they are distributed in network? -is 1 IP from the ISP sufficient if i have a 1:1 internet bandwidth connection?
View 9 Replies View RelatedConnection Says Additional Login Required
Feb 23, 2013Okey so the issue here is that my computer just looses its connection after ive downloaded somewhat or something.especially when im downloading from you know what So.when i try to go on my Chrome, explorer, firefox WHATEVER it says Additional logon information may be required.so i click on that annotation and it just brings me to the home page of my main browser google home page with ofcourse no internet what so ever.. im using Wireless and wired (best connection) for the wired i use it through a cisco but neither works.it works fine on laptop and my iPhone 4.
View 1 Replies View RelatedFacebook Freezes And Gives Additional Reading
May 16, 2012When I login to Facebook on my home computer it opens and trys to read something additional (the little activity circle continues to roatate) but it never completes, it is like it is in an endless loop so my browser (IE 9) locks up and I have to use task manager to terminate. I can get into facebook on my office computer with no problem. Also my wife has the same problem on her facebook account.
View 3 Replies View RelatedAdditional Hardwired Connections Not Detected?
Apr 29, 2012I've been running a small home network with no problems for the last year. I'm unsuccessfully attempting to add a wired connection in my basement, but the laptops do not recognize the connection. I've tried laptops running Vista and WinXP -- neither works.
The attached graphic depicts the current state of the network and also identifies the problem connections. At first I thought my new CAT-5 cables were the problem, but I've ruled that out by swapping the cable from my desktop (hardwired to the wireless router) to the laptop.
I've also pasted the IPCONFIG text from the desktop pictured in the attachment. Is there any obvious reason that setup this isn't working??
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMark>ipconfig/all
[Code]....
Additional Driver To Share Windows 7 PC To XP?
Feb 14, 2013From where I will get additional driver to share windows 7 pc to windows xp users
View 1 Replies View RelatedCisco WAN :: GNS3 Additional BGP Process On Single Router
Jun 16, 2012I need to be able to run more than one BGP routing process on my lab router. I have over connected BGP routers connected to my live production network and I need to emulate the production network with GNS3. However, BGP rules only allow a single BGP routing process on a single router. how to overcome this limitation for my lab?
View 9 Replies View RelatedCisco Wireless :: Additional AP-Manager Interface On WLC 5508
Aug 25, 2011at the moment we are using as default the manager interface as ap-manager interface.
Now I have to change the IP. I would like to change that very smooth with all our locations. My question, is it possible to add a ap-manager interface with a new vlan and IP Range, so that I can move the AP's to the second interface as as soon as it is planed with the location. Sometimes in special cases we have hard coded the WLC IP oder we just need to change the DHCP option but this needs to be planed and I see problem to do that in a hard cut.
Cisco AAA/Identity/Nac :: ACS 5.3 Additional LDAP Attribute Retrieval
Aug 28, 2012I'm authenticating users against Active Directory and want to also check additionals attributes from LDAP. In ACS 5.3. it was possible to set this up via External Identity Sequence, but in ISE I don't see this possibility. I can set sequence only for authentication, but not for additional attribute retrieval.
When I set a condition in a policy that an LDAP attribute must match with some value, the attribute is not retrieved and autorization ends on default Deny Access.
Cisco Wireless :: 1252 LAP - Configure Additional Antenna
Aug 20, 2012I would like to add an additional antenna to a 1252 LAP but I'm unsure of a few things...
I know this LAP currently has at least a yogi directional antenna (AIR-ANT2410Y-R) and also a ( AIR-ANT2485P-R) connected to it. The access point is in a ceiling so I cannot view the connections but according to this data sheet, { URL } each of the antennas I've specified require 3 per AP. I am only aware of 1 of each being used so not sure why 3 would be required?
Also on my 1252 1 side has 3, 2.4Ghz connections for antennas, TX, TX&RX, and RX. If I want to only use 1 AIR-ANT2410Y-R, would this be connected to the TX&RX port? Do all antennas support transmit and receive or are there some that only support TX and others that only support RX or is this based only how you configure the antennas? On the other side of the access point there are 3, 5Ghz antenna connections.
Cisco Routers :: RSV 4000 - Additional License For IPsec VPN?
Jan 4, 2012RSV 4000 bundle with IPSECVPN. Any additional license for IPSECVPN ?
View 2 Replies View RelatedCisco Routers :: RV042G With /29 - Configuring Additional Subnet?
Sep 12, 2012I have a RV042 with two ADSL services on it, that is a nice simple thing for this unit. The problem that I am having though is that one of the ADSL services also has a /29 attached to it.
How do you go about configuring this additional sub net? On a previous unit I have had to create IP aliases, and could then port forward and NAT without too many issues, but it doesn't appear that the RV unit seems to work the same way.
Cisco Routers :: Additional Wireless SSID Rv220w
Nov 3, 2011I have an rv220w router with one SSID and the product says I can add up to 4 additional wireless ssid ie the router is protected with wpa but we have guests that would like to connect to the internet while working in our building . I would like to add a guest SSID with wep security that I could give Clients. The problem I run into is every time I add the Guest ssid the wireless printers that are attached to the routers' main ssid quit working. I noticed that when the rounter was orginally set up the main SSID has IP addresses from 100 to 255 allocated. Do I need to limit the IP addresses in the Main SSID to a smaller number so that the Guest SSID can use the remaining addresses.
View 2 Replies View RelatedExtending A Network With Additional Wifi Router?
Jul 25, 2012As my original Innbox V50U modem/router does not have a strong enough wifi signal I had to add in an additional wifi router - I used a Cisco Linksys E4200.The problem is that if I connect my laptop to the cisco router I can see the Innbox router but not vice versa. There is an additional problem as I have a wireless printer that is connected to the Cisco router. If I connect to the Innbox router I cannot use this printer as I cannot see its IP address.I read somewhere it might be down to the subnet mask. both are set to 255.255.255.0Apologies if this is n00b stuff but I have not had this problem before, I just naturally though the two networks would be able to talk to each-other.
View 1 Replies View RelatedSetup Https Or Http On Additional Router?
May 5, 2011I will be adding wireless access points or repeaters on a business network. The business already has one wireless router using a https login, that 15 computers are wired to, through switches. This Secure http router is directly connected to the cable modem.Would I be loosing the benefit of Secure http by adding wireless access points or repeaters that don't support it? Or would they be securely routed by the main https router connected to the gateway?I have never had the opportunity to work with a secure http router before.
View 4 Replies View Related