Cisco WAN :: PIX 520 To Add Another Eth3 Card To Use For Additional IP Range
Aug 2, 2011
I have an existing external IP block on eth1 which is working fine. I have another eth3 card which I want to use for my additional IP range.So my ISP gave me a new /27 block is addition to what I have now. This block is supposily active and nothing is needed to configure on the ISP router, it is said that it is autmatically available and ready to use once I configure my PIX.I am using the PIX GUI and running into an error while trying to create a NAT pool "Start and end addresses overlap with existing range"
View 53 Replies
ADVERTISEMENT
Nov 10, 2011
Need to know if i can add 1 FE card to 2650XM or 2620 Routers.i know we can add Ethernet card but it is only 10MB .
View 2 Replies
View Related
Oct 11, 2011
We have a Cisco 2851 router with Advanced Securit IOS version 12.4(13r)T. In the router we have a WIC-1ADSL connected to business DSL with a static IP. We were wondering what our options are regarding adding another WIC-1ADSL card and DSL line and either grouping the two or load balancing to increase our bandwidth. Unfortunately at this time DSL is our only option.
View 1 Replies
View Related
Oct 14, 2012
I need a wifi card for my desktop that can get the same 55down 8up as my wired internet that is about 25 feet away. I cannot use a long ethernet cable. It doesn't matter whether it is internal or external as long as I can get the desired connection speed that I need.
View 7 Replies
View Related
Jun 26, 2012
Im having problems staying connected to my internet. I have Verizon Fios router that is wired into this desktop i also have 2 laptops and now im trying to connect a second desktop wirelessly to the router. My Netgear Rangemax PCI picks up the signal at 68% and connects to the router. But periodically it disconnects from the router and i click connect to a network icon and it shows that i have no wireless internet as if no PCI card is installed so i wait a min then it shows up again and windows network diagnostic kicks in and "resets the network adapter" and all is well for about 15min till it disconnects again.
View 1 Replies
View Related
Jan 18, 2012
I am in the process of deploying an additional Cisco 1142 AP into my network. I would like to set it up to be the same SSID as the first one, and be able to have laptops roam from AP to AP. I am simply trying to expand the current coverage of my wireless network. I have both APs mounted and access to both.
-CISCOAP01 - 192.168.2.2
-CISCOAP02 - 192.168.2.3
What do I need to do (configre) to make this happen? I am rather new with Cicso. I am using the web interface to setup the APs. The first one has been up and running for about a year now with no problems. [code]
View 2 Replies
View Related
Jul 28, 2012
Im wanting to add an additional module in to my Cisco 4500. Is as simple as plug and play or is there some commands that I need to add or anything I should be aware of.
View 2 Replies
View Related
Mar 29, 2012
I want to split the usage of the AP so that visitors are on their own wireless connnection and VLAN.We have 2 WAP4410N APs. One AP acts as a repeater for the another AP.They are both in 4.0.4.2 firmware.We are using WPA2 RADIUS authentication, and would like for visitors to use WPA2 PSK. Under Wireless tab, I have 1 SSID, but the other 3 available boxes for SSIDs are greyed out.When I click in them, they will not allow me to type an ID.I watched a video of how to add SSIDs and VLANs, and it looked simple enough.He just clicked in the box and was able to add more IDs.Could my current config be preventing me from adding additional SSIDs?
View 6 Replies
View Related
Jul 27, 2011
I recently purchased another 1142 AP to expand out our current wireless infrastructure, my question is, what exactly needs to be done for this to work so that users can roam freely and auto-connect to the closet AP with the best connection without getting disconnected?
I have set all the settings the exact same on the new AP to match the existing AP. (How to save the configs into a file would be great, I am not sure how to do that)... But anyhow, before I launch it, I would like to be sure I am correct so I do not bring down the existing network. Of course, the only difference between the 2 are the IP addresses. AP1 is 192.168.2.2 and AP2 is 192.168.2.3
All computers are using Linksys Wireless-N cards.
View 2 Replies
View Related
Feb 13, 2011
I confgured one L2L VPN on my ASA 5505.
How to add another L2L configuration for an additional peer ?
View 4 Replies
View Related
Apr 10, 2011
If I am to add the Self-generated certificate of my new CAS to my existing CAM's trusted certificate authorities list, will it just be added or will it replace the existing trusted certificate?
View 4 Replies
View Related
Mar 31, 2011
my company has a 4mbps leased line from TTSL . we are getting 2 WAN IP and 2 LAN IP. in Addition we are also getting 12 additional IPs .-what is additional IP, their uses?-how are the 2 wan ips configured? & how they are distributed in network? -is 1 IP from the ISP sufficient if i have a 1:1 internet bandwidth connection?
View 9 Replies
View Related
Feb 23, 2013
Okey so the issue here is that my computer just looses its connection after ive downloaded somewhat or something.especially when im downloading from you know what So.when i try to go on my Chrome, explorer, firefox WHATEVER it says Additional logon information may be required.so i click on that annotation and it just brings me to the home page of my main browser google home page with ofcourse no internet what so ever.. im using Wireless and wired (best connection) for the wired i use it through a cisco but neither works.it works fine on laptop and my iPhone 4.
View 1 Replies
View Related
May 16, 2012
When I login to Facebook on my home computer it opens and trys to read something additional (the little activity circle continues to roatate) but it never completes, it is like it is in an endless loop so my browser (IE 9) locks up and I have to use task manager to terminate. I can get into facebook on my office computer with no problem. Also my wife has the same problem on her facebook account.
View 3 Replies
View Related
Apr 29, 2012
I've been running a small home network with no problems for the last year. I'm unsuccessfully attempting to add a wired connection in my basement, but the laptops do not recognize the connection. I've tried laptops running Vista and WinXP -- neither works.
The attached graphic depicts the current state of the network and also identifies the problem connections. At first I thought my new CAT-5 cables were the problem, but I've ruled that out by swapping the cable from my desktop (hardwired to the wireless router) to the laptop.
I've also pasted the IPCONFIG text from the desktop pictured in the attachment. Is there any obvious reason that setup this isn't working??
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMark>ipconfig/all
[Code]....
View 9 Replies
View Related
Feb 14, 2013
From where I will get additional driver to share windows 7 pc to windows xp users
View 1 Replies
View Related
Jun 16, 2012
I need to be able to run more than one BGP routing process on my lab router. I have over connected BGP routers connected to my live production network and I need to emulate the production network with GNS3. However, BGP rules only allow a single BGP routing process on a single router. how to overcome this limitation for my lab?
View 9 Replies
View Related
Aug 25, 2011
at the moment we are using as default the manager interface as ap-manager interface.
Now I have to change the IP. I would like to change that very smooth with all our locations. My question, is it possible to add a ap-manager interface with a new vlan and IP Range, so that I can move the AP's to the second interface as as soon as it is planed with the location. Sometimes in special cases we have hard coded the WLC IP oder we just need to change the DHCP option but this needs to be planed and I see problem to do that in a hard cut.
View 11 Replies
View Related
Aug 28, 2012
I'm authenticating users against Active Directory and want to also check additionals attributes from LDAP. In ACS 5.3. it was possible to set this up via External Identity Sequence, but in ISE I don't see this possibility. I can set sequence only for authentication, but not for additional attribute retrieval.
When I set a condition in a policy that an LDAP attribute must match with some value, the attribute is not retrieved and autorization ends on default Deny Access.
View 17 Replies
View Related
Aug 20, 2012
I would like to add an additional antenna to a 1252 LAP but I'm unsure of a few things...
I know this LAP currently has at least a yogi directional antenna (AIR-ANT2410Y-R) and also a ( AIR-ANT2485P-R) connected to it. The access point is in a ceiling so I cannot view the connections but according to this data sheet, { URL } each of the antennas I've specified require 3 per AP. I am only aware of 1 of each being used so not sure why 3 would be required?
Also on my 1252 1 side has 3, 2.4Ghz connections for antennas, TX, TX&RX, and RX. If I want to only use 1 AIR-ANT2410Y-R, would this be connected to the TX&RX port? Do all antennas support transmit and receive or are there some that only support TX and others that only support RX or is this based only how you configure the antennas? On the other side of the access point there are 3, 5Ghz antenna connections.
View 7 Replies
View Related
Jan 4, 2012
RSV 4000 bundle with IPSECVPN. Any additional license for IPSECVPN ?
View 2 Replies
View Related
Sep 12, 2012
I have a RV042 with two ADSL services on it, that is a nice simple thing for this unit. The problem that I am having though is that one of the ADSL services also has a /29 attached to it.
How do you go about configuring this additional sub net? On a previous unit I have had to create IP aliases, and could then port forward and NAT without too many issues, but it doesn't appear that the RV unit seems to work the same way.
View 1 Replies
View Related
Nov 3, 2011
I have an rv220w router with one SSID and the product says I can add up to 4 additional wireless ssid ie the router is protected with wpa but we have guests that would like to connect to the internet while working in our building . I would like to add a guest SSID with wep security that I could give Clients. The problem I run into is every time I add the Guest ssid the wireless printers that are attached to the routers' main ssid quit working. I noticed that when the rounter was orginally set up the main SSID has IP addresses from 100 to 255 allocated. Do I need to limit the IP addresses in the Main SSID to a smaller number so that the Guest SSID can use the remaining addresses.
View 2 Replies
View Related
Jul 25, 2012
As my original Innbox V50U modem/router does not have a strong enough wifi signal I had to add in an additional wifi router - I used a Cisco Linksys E4200.The problem is that if I connect my laptop to the cisco router I can see the Innbox router but not vice versa. There is an additional problem as I have a wireless printer that is connected to the Cisco router. If I connect to the Innbox router I cannot use this printer as I cannot see its IP address.I read somewhere it might be down to the subnet mask. both are set to 255.255.255.0Apologies if this is n00b stuff but I have not had this problem before, I just naturally though the two networks would be able to talk to each-other.
View 1 Replies
View Related
May 5, 2011
I will be adding wireless access points or repeaters on a business network. The business already has one wireless router using a https login, that 15 computers are wired to, through switches. This Secure http router is directly connected to the cable modem.Would I be loosing the benefit of Secure http by adding wireless access points or repeaters that don't support it? Or would they be securely routed by the main https router connected to the gateway?I have never had the opportunity to work with a secure http router before.
View 4 Replies
View Related
Nov 18, 2011
i'm connecting to the internet using a desktop pc and a D-Link DSL-2560U (modem + wireless router). The wifi signal is very low on the other side of the house. I also have another wireless router - a Trendnet TEW-431BRP, and i want know if i can put it in the middle of the two areas of the house in order to boost the wifi signal in that area. How can i do it?
View 4 Replies
View Related
Mar 21, 2011
So far we add any router in the existing network simply by disabling DHCP server, and adding LAN ip for that. We don't add WAN detail at all in the additional routers. And plug one cable from main network to the LAN port of the additional routers.So we basically use that additional routers only as a access point for WIFI.But what I wonder is if it's possible for me to use the additional routers with the same feature as of the main routers i.e. Enabling DHCP server so that it too can give its own DHCP ip address.
View 2 Replies
View Related
Apr 28, 2013
We've never had to do this before: best practice on setting up an additional subnet on a physical network?
For example, main network is 10.1.1.1, we need to setup an additional 10.1.2.1 to support more devices. We need both subnets to see each other and the servers on 10.1.1.1. We also need the new subnet to have access to the internet.Equipment we have: HP 2824's (2 current VLAN's - second one is for phones) and Untangle for our firewall.
View 9 Replies
View Related
Apr 25, 2012
I have an 871w set up to add wireless connectivity to an existing network. When adding a client to the physical interfaces to test VLAN internet connectivity, however, a DHCP address is assigned but internet traffic on the terminal never reaches the network nor does the network recognize the IP the terminal shows as being 'connected'. Also, pings sourced from the VLAN do reach destinations. I've attached my config file, I think it's a routing issue of some kind.
10.26.99.0 is the existing network. 10.26.99.1 is an existing 871w router set as the DHCP server for that network and 10.26.99.10 is a Windows Server 2003 DNS box. VLAN 2 and DHCP pool alpha were control sets for trialing DNS settings.
View 10 Replies
View Related
Dec 9, 2012
we have a setup of about 14 WS-C2960-48FPS-L all running from a 3750G stack.What i want to be able to do is create dedicated accounts so that local IT admins can tag ports via CNA without calling me everytime something needs to change. How and where can i create these on CNA? Is it as simple as using the Users and Passwords options?What privledge level should i assign to these accounts so that it will give the least amount of previledge required to tag ports. I dont want them being able to change much else.
View 2 Replies
View Related
May 10, 2012
getting my additional IP addresses working on my ASA 5510. I have a /29 allocation and outbound access and inbound access to my internal www server is working fine through the default outside interface. However, I now need to setup a second IP address that maps internally to a different web server. When I setup a new network object with automatic NAT translation to the new IP address, it does not work. If I setup the same scenario using the outside interface, it works fine. What is the proper way to setup additional IP address on my ASA v8.4?
View 10 Replies
View Related
Oct 21, 2012
We have a CISCO WLAN in place with several SSIDs including one on the Voice VLAN. We need to add an additional one using CCKM due to wireless phone roaming issues. Does adding a new SSID to the WLAN cause any outage whatsoever? We are in an environment where even a small amount down time is not acceptable.
We are using two 5500 controllers with hundreds of LAP1142N
View 2 Replies
View Related
Jul 31, 2012
I have run out of public facing IP addresses and I need more. Assuming I have been issued 1.1.1.0/24 and my new/additional range/subnet issued is 2.2.2/0/24 - Can I carry on with the same configuration on my ASA5510 and just add static NAT for new services in the 2.2.2.0/24 range.
i.e.existing config
route 0.0.0.0 0.0.0.0 1.1.1.254 (upstream ISP)
Interface outside ip address 1.1.1.1 255.255.255.0
NAT 2.2.2.1 to 10.1.2.3
or, assume my ISP will deliver 2.2.2.1 to my outside interface (1.1.1.1.1/24) and if my NAT is in place it will get delivered to 10.1.2.3 inside.
or, put another way I dont need change my set-up as I just static route to my ISP!
my real public IP is a /27 can I use my broadcast address (its a legit public IP address)?
i.e 1.2.3.0/27 = 1.2.3.1 to 1.2.3.31
Outside interface = 1.2.3.1/27
Can I use 1.2.3.31 and NAT it to an internal server?
View 3 Replies
View Related
