Fios Router Connecting To A Netgear Range Max PCI Card?
Jun 26, 2012
Im having problems staying connected to my internet. I have Verizon Fios router that is wired into this desktop i also have 2 laptops and now im trying to connect a second desktop wirelessly to the router. My Netgear Rangemax PCI picks up the signal at 68% and connects to the router. But periodically it disconnects from the router and i click connect to a network icon and it shows that i have no wireless internet as if no PCI card is installed so i wait a min then it shows up again and windows network diagnostic kicks in and "resets the network adapter" and all is well for about 15min till it disconnects again.
View 1 Replies
ADVERTISEMENT
Jun 14, 2012
Can I use netgear WGR 614 as range extender of another wireless router?I already using a model with wireless router, i have a spare netgear WGR 614. I want this router to pick up wireless signal from the first wireless router then share the internet on ethernet port only.
View 4 Replies
View Related
Dec 11, 2012
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies
View Related
Aug 4, 2011
I have a wireless network in a 2 storey house. The internet access and 1 WRT54GS router is on the 1st floor (using frequency channel 11). The wireless single doesn't do very well on the second floor unless there is a device with a strong antenna. I recently purchased a WET610N Bridge and I have an extra WRT54GS (using frequency channel 1).
I would like to be able to add wireless to the 2nd floor by attaching the extra router to the bridge which would wirelessly connect to the router with the internet.
View 2 Replies
View Related
May 8, 2011
Wireless card not connecting to router .This is what we have so far
[code]...
This issue seemed to be addressed previously, but wasnt sure if I should create a new thread or reply to the old one.
View 10 Replies
View Related
Mar 30, 2011
Have Dell 6400, run Win XP serv. pack 3. No red X or yellow ! under Device Manager. I did open up laptop, took out WLAN card, restarted laptop, turned off laptop, reinstalled WLAN card, restarted laptop.
[code]...
View 14 Replies
View Related
Jul 23, 2011
My NetGear router stopped connecting to the internet. The internet light, which is usually orange, is now yellow and flashing. I tried rebooting everything and now, when it connects it says "local access" so I can't get on the net
View 3 Replies
View Related
Oct 9, 2011
i have an old Netgear MR 314 router that works like a charm for my wired connections, but whenever i try to connect wirelessly from my phone or laptop, it connects but doesn't access the internet.
View 5 Replies
View Related
Aug 10, 2011
Ive been having problems with the Wireless connection on my laptop for a while now. Basically even though the signal strength is shown as excellent and hovering over the little monitor in notification area shows "Internet access" i cannot connect to the Internet via WiFi. The strange thing is when i connect an Ethernet cable the signal strength on the bottom goes up and i get Internet access but the computer seems to think its got a wireless connection, even though its actually a wired connection. Ive already tried the following
Driver Update
Windows Update
AntiVirus/Malware Scan
Firewall/Anti Virus Off
Ethernet Connection Disabled and Enabled
Changed router channel
reset wep key numerous times
Network Scan (no problems found)
System Information
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408-1631)
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz (2 CPUs), ~2.1GHz
Memory: 4096MB RAM
Available OS Memory: 3892MB RAM
[code]....
View 14 Replies
View Related
Oct 14, 2012
I need a wifi card for my desktop that can get the same 55down 8up as my wired internet that is about 25 feet away. I cannot use a long ethernet cable. It doesn't matter whether it is internal or external as long as I can get the desired connection speed that I need.
View 7 Replies
View Related
Aug 30, 2011
I have a WMP600N PCI card connecting to a WRT610N router. I get a weaker signal when I connect to the N band (5Ghz) than the G band (2,8Ghz). Why is that? How should I set up my router/PCI card to get the maximum performance?
View 9 Replies
View Related
Dec 24, 2012
I am running an i7 MSI gt683 with windows 7 with an Intel Centrino Wirelss-N 130. My home wifi connection runs off of comcast on a netgear router, and the wireless connection works on every single device in the house except for my laptop. I can run my ps3, my wii, we have an ipad, all our phones can connect and we have another laptop that connects with no issue. I have updated my drivers for my wireless card to the latest, flushed the ip on my desktop that the modem is connect to a dozen times. The only way to sometimes fix it is to manually log in to my router and release/renew the ip address from there. Sometimes it will work, sometimes it won't. When it does work, it will work for about a week and then stop working for no reason at random times.The errors I keep getting are:Identifying network (which runs infinitely before cycling back to no internet connection)Connected with no internet access.
View 5 Replies
View Related
Mar 8, 2011
How do you connect two routers together to increase signal through the whole house? I am trying to use the n300 as my main router (its hooked to cable modem) and use the 2wire as an access point.The two are connected by a known good ethernet cable.
View 2 Replies
View Related
Dec 24, 2011
how can i connect a Net gear DGN2200 wireless modem router to a D link DGL4500 wireless router ??
View 1 Replies
View Related
Jul 6, 2011
I have a netgear CVG834G main router, were my desktop is plugged on to.I pulled a new cable trough the house and garage to have internet access on the other side (cable length is about 80 meters).After the 80meters of cable I placed a Linksys WRT54GS v5.1 router. The problem is that I can connect to the Linksys, but the Linksys can�t connect to the netgear. On the Linksys the internet LED is blinking very slowly (what does this mean?). So first I thought that the cable was broken or too long. I tested the cable => not broken. I connected the Linksys with the netgear trough a shorter cable and then connected my laptop via the long cable (80meter) and this works perfectly.Is the maximum distends a netgear can take less than 80 meters? (thought is was 100meter ).
View 3 Replies
View Related
Oct 3, 2012
I have been using a cable modem gateway - Netgear CGD24G from Charter for two years. I just bought Netgear R6300 wifi rounter in order to upgrade the speed and range for my internet. My goal is to upgrade 802.11g to 802.11ac. Is there any special way to setup it up? Or do I need to contact Charter to replace a new gateway?
View 7 Replies
View Related
Aug 2, 2011
I have an existing external IP block on eth1 which is working fine. I have another eth3 card which I want to use for my additional IP range.So my ISP gave me a new /27 block is addition to what I have now. This block is supposily active and nothing is needed to configure on the ISP router, it is said that it is autmatically available and ready to use once I configure my PIX.I am using the PIX GUI and running into an error while trying to create a NAT pool "Start and end addresses overlap with existing range"
View 53 Replies
View Related
Mar 18, 2011
I've got an Optus (in Australia, so 3G mobile broadband is all that matters I would think) that I'm trying to connect to a Netgear WGR614v9 wireless router. So the 3g mobile plugs into usb on computer; the router to the ethernet card on computer.
I know; I could buy one that has it in one package, but we're throwing the router out from work anyway. If this works my daughter will be thrilled with her iPod more is all :)
I've got the mobile broadband on, and plugged in the router and Windows 7 makes a second network connection automatically for the router, though with no internet access, and the setup wizard in the router claims to have no access to the internet. (though clearly I'm posting...lol).
We can see the Wireless signals on devices and can connect to the router but then the devices say no internet access when you actually try to access the web, like the router wizard does. and yet, we are online
View 2 Replies
View Related
Jan 10, 2012
I am trying to connect a wireless router (EDIMAX br-6228nc) with a ADSL router (NETGEAR). i assigned the LAN IP of the ADSL modem to 192.168.1.1, subnet mask 255.255.255.0, and enable DHCP server.then i connected a LAN port from ADSL router to the WAN port of the wireless router. i assigned IP of the WAN port of wireless router to 192.168.1.10, subnet mask to 255.255.255.0 and default gateway to 192.168.1.1 now on the LAN side of the wireless router i assigned IP 192.168.0.1 and subnet mask 255.255.255.0 enabling DHCP server.on the client pc i selected the setting of automatically assign IP setting (which it got 192.168.0.100, default gateway 192.168.0.1) but my client pc is not able to access the internet.
View 2 Replies
View Related
Oct 18, 2012
I am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:
- When connecting via wi-fi everything is fine
- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity
- When enabling my LAN and disabling wi-fi lose all internet connectivity
Here is my IP Config when both are enabled :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig
Windows IP Configuration[code].....
View 4 Replies
View Related
Dec 9, 2012
I have netgear router WNR 1000 v2. I'm not able to connect to Apple ipod. The password is not been accepted.
View 2 Replies
View Related
Aug 4, 2011
I am having trouble getting the wrt610n to connect to the wnr2000v2 that can be set a wireless repeater. I had a 160n hooked up and it was working fine, but am unable to get the 610n going on it. setting this type of networking up , but have a general idea of how it works. I have the 610n running and is broadcasting a signal, but the wnr 2000 will not connect to it wirelssly and repeat it. The setup in the netgear is pretty basic , but I am new to the linksys 610n and the interface that's why I believe it has to do with the 610n.
View 3 Replies
View Related
May 21, 2012
ADSL Box in office ground floor - Range extender in 1st floor lounge - portable Win7 64 in dining room next to lounge (1st floor) Setup proceeds and completes as it should but the problem: The portable connects to the new link *_EXT but with "no access" (the extender is not connecting to the router). Having read several reviews about connection problems with this kit, none seem to have the problem I have.
View 10 Replies
View Related
Jan 30, 2013
I purchased the latest range extender, but the password was not logged, so we cannot use the NetGear extender shown in the wireless network list.
View 3 Replies
View Related
Dec 25, 2012
I'm running Windows Vista on PC. Have a Netgear router. Just bought Netgear range extender WN3000RP. Have the extender plugged in and light is green. When I try my PC's wireless network manager, it does not recognize any wireless devices to add. How can I connect to the extender wireless network when it is not recognized on my wireless manager??
View 1 Replies
View Related
Aug 9, 2011
I recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.
View 2 Replies
View Related
Jul 17, 2011
I recently bought a Netgear WN2000RPT from Best Buy and I couldn't manage to get past the setup (wouldn't connect with my existing router), and I'm returning it tomorrow.
I just need to repeat the wireless-G signal downstairs to the other side of the house upstairs.What are your recommendations?
View 1 Replies
View Related
Nov 7, 2011
I am currently working on a job that has roadside equipment sending in data to an office-based instation server via a private APN. This is currently working fine and data is being received. However, for maintenance reasons its is necessary to connect from the instation server back out to the roadside equipment's web GUI. Currently this isn't working! I think this is because they are on different IP ranges. [code] I've tried messing about with adding routes and changing the mask address but so far have had no luck.
View 4 Replies
View Related
Apr 9, 2012
I have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies
View Related
Dec 20, 2012
Although I haven't looked through all the forum topics I couldn't find anything very similar to my situation. I have a rather large house and my modem/router (Netgear DGND3300 v2 due to DSL) is in the very corner. Given this most of the opposite corner of my house gets either poor or no connection; however, I do have an ethernet cable run across the house through the basement to my home theatre setup. This is where I encounter another problem, I need multiple devices to be connected via ethernet and I also need to have wireless in that same area. In my mind I picture myself connecting a second router to this ethernet cable through which I could have wired connections to all my devices, and a second router broadcasting wirelessly. I'm familiar with some types of wireless bridging, but I'd rather use more of a wired bridge concept if possible, but I've never really seen something like this. The question is, is this possible? Or, what is another possible way to achieve the same results? The only other thing I can think of is to run an ethernet hub from the original wired connection to my home theatre so I can connect multiple ethernet devices and run a separate wireless extender or something, but this just seems pricy.
View 2 Replies
View Related
Apr 7, 2011
My Dell XPS (Windows XP) is not connecting to my network..can't get anything to show up on the networks in range list. My other laptop is fine. But I just upgraded to Firefox 4 on the Dell, and then the connectivity went askew.
View 2 Replies
View Related
Feb 27, 2013
I have DSL service with AT&T and I have a Motorola 3360 modem. We also have a /28 network of static IPs from AT&T. When I login using PPPoE on the modem it gets x.x.x.190 as it's address. Our range is 177-190. I have two ASA 5510s in an active/passive failover configuration with the Ethernet port of the modem and one interface of each of the ASAs on a dumb layer 2 switch.
I want to setup this DSL connection as a backup to our main Internet connection. I cannot figure out what setting on the DSL modem to use to make this happen. I know I cannot use PPPoE in a failover setting so I can't have the modem in bridged mode. There is some mode where it passes the 190 address to the connected device and when I plug in a PC directly to the modem and set it for DHCP it does get 190 as it's address. So do I configure the ASA interface as 190 with one of the other addresses as it's standby? What do I set my route on the ASA to for use of this connection? Can I then make use of these other static addresses when plugging other devices into the layer 2 switch?
View 4 Replies
View Related
Feb 20, 2013
How to hook up a seperate wireless router instead of using the fios router. I want to get a n-signal in my house. Would like an answer or a link to another thread.
View 1 Replies
View Related
