I'm running Windows Vista on PC. Have a Netgear router. Just bought Netgear range extender WN3000RP. Have the extender plugged in and light is green. When I try my PC's wireless network manager, it does not recognize any wireless devices to add. How can I connect to the extender wireless network when it is not recognized on my wireless manager??
View 1 RepliesI have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies View RelatedI bought a Netgear WN3000RP Extender for better wifi range, because on my room upstairs I have no signal at all (so called dead spots) So, I installed it a few months ago and all was working fine, untill we had to leave the house for vancation. Someone in the house pulled the extender out of the electric outlet. A few weeks later we pulled it back in it, but here started the problem: I installed the extender again, but now without any succes. (Just incase you want take a look: [URL]
There are 4 LED lights attached to this extender. 3 of them are lighting, but the 4th won't light at all. LED's: [URL]
I did the exact same procedures as exampled in the installation manual, but nothing worked. I always got this error on the end of the unsuccesful installation: Move the extender closer to the existing router or gateway.
Im really sure the extender is in the range of my actual router!
I've tried everything from restoring to factory defaults to WPS, DPS, disabling security, Nothing works.. I always get stuck on the error. (With WPS I press both the buttons on the extender and the router, but they cant find each other.)
I have just purchased a Netgear WN3000RP wireless extender.The security setting on all devices on the existing network show as WPA2-PSK wireless n but the extender comes up as WPA-PSK wireless g although the instructions say it will copy existing security settings.There is supposed to be a Netgear website to log on to an installation wizard but this doesn't work and appears not to have worked for some months.Why are Netgear still selling this device without an installation disc when they must know by now that their site doesn't work?Is there any way to alter the security setting of the extender?
View 10 Replies View Relatedbasically, my iMac detects the extender as routername_EXT which is fine, but says that the password i type is wrong. when i use my original router with my iphone with the same password it works, but when i try to use it with my extender it says that the password is wrong.
View 1 Replies View RelatedADSL Box in office ground floor - Range extender in 1st floor lounge - portable Win7 64 in dining room next to lounge (1st floor) Setup proceeds and completes as it should but the problem: The portable connects to the new link *_EXT but with "no access" (the extender is not connecting to the router). Having read several reviews about connection problems with this kit, none seem to have the problem I have.
View 10 Replies View RelatedI have Verizon router and I do not know how I can connect to extender WN3000RP.
View 2 Replies View RelatedI purchased the latest range extender, but the password was not logged, so we cannot use the NetGear extender shown in the wireless network list.
View 3 Replies View RelatedCan I use netgear WGR 614 as range extender of another wireless router?I already using a model with wireless router, i have a spare netgear WGR 614. I want this router to pick up wireless signal from the first wireless router then share the internet on ethernet port only.
View 4 Replies View RelatedI recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.
View 2 Replies View RelatedI recently bought a Netgear WN2000RPT from Best Buy and I couldn't manage to get past the setup (wouldn't connect with my existing router), and I'm returning it tomorrow.
I just need to repeat the wireless-G signal downstairs to the other side of the house upstairs.What are your recommendations?
Will a Wi-Fi range extender affect (i.e., reduce) the signal of the router? How does the throughput signal compare between where it originates and where it ends?
View 2 Replies View RelatedI have a wireless modem but its a sucky one. It was one of those free ones from verizon. Anyways, I don't get good signal in certain places in my house, so i am interested in knowing which would be better a wifi range extender or a good wireless modem.
View 1 Replies View RelatedCan N600 DB Wi-Fi Range Extender have the exact same name as my N600 DB Router or does the extender have to have the additional characters "_xt" at the end of the extender name, when the first part matches the router name?
View 1 Replies View RelatedI work at a Public Safety building in Pennsylvania and our employees here share a Wifi connection with a local hospital facility that is in a industrial park behind us. The room we work in is able to access the Public Wifi but only half of the room has a good connection. I went to the local computer store and purchased a Belkin Dual-band wireless Range Extender and got it all set up, now I have the Public Wifi Extention access and it will connect to it but it has no internet access. Now we have no access to the administor or the network from our facility. How do i get internet access thru this range extender? If i connect from the good half of the room to the Public wifi i have a good connection with internet access but as soon as you put it thru the extender no more internet access.
View 1 Replies View RelatedRegion : Singapore
Model : TL-WR700N
Hardware Version : V1
Firmware Version :
Since i know there's a "Repeater Operation Mode" in TL-WR700N Wireless Lan Mini Pocket Router, so what's the difference between TL-WA850RE WiFi Range Extender?I know the maxium speed support is different, but.... what else ?
I am having problem using the N300 dual-Ban Wi-Fi Range extender with my att 2wire 3800HGV-B router. Cannot use the extender to access the internet. The Att router works without it. Just want to use the extender to extend my att router signal but cannot.
View 3 Replies View RelatedCan I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?
View 4 Replies View RelatedThe router I'm connecting it with is a bright house RCA dwg855t. I go through the setup and the net gear device isn't receiving an IP address from the router.
View 1 Replies View RelatedI just installed a Netgear WiFi extender. In order to set all the preferences, it wants a password and login and I have no idea what that is. I tried everything I could think of, but no go. how to reset the pw and figure out what my login is? Have had no response that addresses this problem. I am using Win 7 and I have an ARRIS cable modem. I've already gone thru the users guide with a fine tooth comb and have found nothing. I have been using WiFi on Netgear equipment for years, so it's not a new network. I also tried the login=admin and password=password and that didn't work.
View 3 Replies View Relatedhow do i connect belkin range extender to comcast gateway smc cd3gnv gateway. Thus far range extender will not connect to internet.
View 1 Replies View RelatedI recently configured a linksys range extender to my modem and since doing that, I'm getting a message stating that there is an IP address conflict with another system on the network. When I set up the range extender, I assigned an IP address to it that was different from the modem but yet this message still appears. Also even though my wireless connection is connected, I'm unable to connect to the internet - I keep getting the message 'internet explorer cannot display webpage'.
View 3 Replies View RelatedI just connect my new EA 6500 router and I am trying to connect my Belkin F9K1106 Range extender to the 5Ghz and it keeps saying the password is incorrect. I am able to connect to the router using 2.4Ghz with the same password. I have updated the extender's firmware to 1.00.16 and it didn't work.
View 10 Replies View RelatedI have decided to buy belkin n600 router. my question is can i connect Belkin wireless range extender n300 to belkin n 600 for beater coverage. is this possible ? if possible how many extender i can connect to the router and also can i connect extender with wire and wireless.
View 12 Replies View RelatedI have an existing Ethernet 100meg LAN and I want to add a wireless capability. I have looked at some products and it is confusing. Range extenders for about 40-50 UK GBP (equiv $65 US). Eg Netgear WN3000RP or WN2000RPT. But they mention extending the range of an existing wireless network?
View 2 Replies View Relatedhow to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies View RelatedCan I use a 625 as a range extender? And if I can how do I do it?
View 3 Replies View Relatedtrying to setup universal wifi extender. Lights indicate system is on and connected to my computer. however wps and link rate lights are not on.
View 1 Replies View RelatedLittle info on my setup as is: Comcast ISP Internet Modem with the wireless gateway built in. I live in a faily large house and am out in my garage a lot where the signal is sub-par, id also like to have internet out in my yard without it sucking.
I have an extra linksys wrt45g sitting in my garage...could I use that someway to extend the range of my wifi? The signal from my main gateway is wireless N.
I currently have a Belkin router and a Belkin range extender. I have the router downstairs and the extender upstairs. Right now the router operates as <SSID> and the extender is <SSID> Alt. I would like to use them both as <SSID>, and have them work together. For example, I use the Wifi downstairs on my laptop, I walk upstairs, and I don't have to change over to the other network. It would switch automatically to the stronger signal.
View 5 Replies View RelatedI have a Cisco Valet+ AP. I have added an Engenius Range extender, big house, (actually a B&B). The setup seems to have gone well (ranger extender linked to AP). Is there a way that I can verify that a PC in the big house away from the AP is actually connected to the Range Extender.
View 1 Replies View RelatedI started out with a wireless router/modem that my ISP provides as its default modem. It was and still is working fine. We will call this router A. My uncle who is living with me wasn't receiving the wifi signal in his room so he went and bought a different router that is supposed to have more range. Also, I believe it is capable of providing higher speeds wirelessly, but that is really irrelevant I think. We can call this new router B. I currently have router B running through router A with an ethernet cable into a LAN port- LAN port to LAN port. I basically want B to be a wireless range extender.My question is quite simple actually. I have everything up and running just fine, but it seems as if the wireless signal may still be coming from the old router A.
View 5 Replies View RelatedI just bought belkin range extender and I can't get it connected to my network because the 192. page won't open?
View 1 Replies View Related