Setting Up Netgear Wn300rp Wifi Extender?

Dec 3, 2011

The router I'm connecting it with is a bright house RCA dwg855t. I go through the setup and the net gear device isn't receiving an IP address from the router.

View 1 Replies


ADVERTISEMENT

Netgear Wifi Range Extender Wn2000rpt?

May 21, 2012

ADSL Box in office ground floor - Range extender in 1st floor lounge - portable Win7 64 in dining room next to lounge (1st floor) Setup proceeds and completes as it should but the problem: The portable connects to the new link *_EXT but with "no access" (the extender is not connecting to the router). Having read several reviews about connection problems with this kit, none seem to have the problem I have.

View 10 Replies View Related

Tp-link 300mbps Wireless :: Setting Up Wr841nd As Wifi Extender?

Feb 23, 2013

Region : Portugal
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP :

Yesterday I bought this router to extend my wifi signar from my cable router. Now I know that it is possible using the WR841ND as an wifi extender using third-party firmwares but what I like to know is if there is any way to make the router work like that but using the original firmware. I followed a guide that explained how to do it but the only thing I can do is extend the wireless signal without the internet acess.

View 5 Replies View Related

Netgear Wifi Range Extender Wn3000rp - Can't Connect?

Dec 25, 2012

I'm running Windows Vista on PC. Have a Netgear router. Just bought Netgear range extender WN3000RP. Have the extender plugged in and light is green. When I try my PC's wireless network manager, it does not recognize any wireless devices to add. How can I connect to the extender wireless network when it is not recognized on my wireless manager??

View 1 Replies View Related

Netgear Extender For Wifi At Home Lost Password?

Dec 4, 2012

I just installed a Netgear WiFi extender. In order to set all the preferences, it wants a password and login and I have no idea what that is. I tried everything I could think of, but no go. how to reset the pw and figure out what my login is? Have had no response that addresses this problem. I am using Win 7 and I have an ARRIS cable modem. I've already gone thru the users guide with a fine tooth comb and have found nothing. I have been using WiFi on Netgear equipment for years, so it's not a new network. I also tried the login=admin and password=password and that didn't work.

View 3 Replies View Related

Wireless :: Netgear WN3000RP Wireless Range Extender Security Setting?

Jan 2, 2012

I have just purchased a Netgear WN3000RP wireless extender.The security setting on all devices on the existing network show as WPA2-PSK wireless n but the extender comes up as WPA-PSK wireless g although the instructions say it will copy existing security settings.There is supposed to be a Netgear website to log on to an installation wizard but this doesn't work and appears not to have worked for some months.Why are Netgear still selling this device without an installation disc when they must know by now that their site doesn't work?Is there any way to alter the security setting of the extender?

View 10 Replies View Related

Routers / Switches :: Configure Netgear Wn3000rp Wifi Range Extender Using Windows 7 X64?

Apr 9, 2012

I have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9

View 7 Replies View Related

Setting Up A DLAN Wireless Extender Connection?

Mar 18, 2013

find the IP address of the dLAN Wireless Extender so I can go into advanced settings to set up the name, password etc. The Extender config tool provided cannot find it.I replaced my cheap WiFi extender which used to drop the connection all the time with a Devolo dLAN 200 AV Wireless-N Starter Kit, which was highly praised all over the place.How I set it up. The manual clearly states both the single Etherner port plug and the 3-ethernet plug should be slotted directly into the mains sockets which I have done. The smaller, single ethernet plug connects to my Router with the ethernet cable provided. The bigger plug is plugged into a different socket without any other cables attached. The power, house(dLAN), ethernet lights are green on both as well as the Wifi light is green on the extender.I used the dLAN cockpit program to add the Extender by entering the security code on the back, now both of them show up in the Cockpit interface and say "ON". I have the option to change the password for the entire network via the Cockpit, which I did. I assumed that's all the plug & play I had to do to make it work. Wrong. I cannot connect wirelessly at all. The network shows in the available list as devolo-000.......... with full signal, I click it, enter the password, it says authenticating and then drops.

The whole purpose for this is to have an extended Wifi Network around the house where the router cannot reach. But I cannot connect. Now i was reading on Davolo site where it says " You can set up or change the configuration of the dLAN® 200 AV Wireless N via the web interface. To access this interface, simply enter the known IP address of the product into any web browser (e.g.Internet Explorer) or call up the web interface via the dLAN® Cockpit."I also checked that apparently, the newer version, the dLAN 500 has a "config" button in the Cockpit application which takes you directly to the web interface to set up your wifi, but the 200 does not. I do not know what the IP address of the Extender is, I do not know how to reach the interface via my browser. I did have a feeling it had to be done because firstly I wanted to change the name of the Wifi network but couldn't figure out where.

I would also like to add that a program included in the set-up disc, called dLAN Wireless Extender Configuration doesn't seem to find it, so I cannot enter to look at any settings. It pops up with "the dLAN wireless extender was not found. is the dLan wireless extender switched on and properly connected to this computer's local network?"

View 14 Replies View Related

Netgear 79 - How To Use A Second Wireless Router As Extender

Nov 10, 2012

my wireless connection (netgear 79) fluctuates often from 5 bar signal dropping to 1 - computer repairman suggested programming an extender into router...my computer is only 8 ft. from router in another room...would a second router do better and/or easier to implement

View 1 Replies View Related

Setting Up Wireless Range Extender For Sony Bravia TV?

May 7, 2011

On instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.

View 4 Replies View Related

Change Username And Password - Netgear Extender?

Jan 22, 2013

How do I change the username and password on my home wi-fi extender (Netgear). I can't remember my original username and password and it will not let me use the extender until I put it in.

View 3 Replies View Related

WN3000RP - Can't Connect To Internet With Netgear Extender

Aug 29, 2012

I bought a Netgear WN3000RP Extender for better wifi range, because on my room upstairs I have no signal at all (so called dead spots) So, I installed it a few months ago and all was working fine, untill we had to leave the house for vancation. Someone in the house pulled the extender out of the electric outlet. A few weeks later we pulled it back in it, but here started the problem: I installed the extender again, but now without any succes. (Just incase you want take a look: [URL]

There are 4 LED lights attached to this extender. 3 of them are lighting, but the 4th won't light at all. LED's: [URL]

I did the exact same procedures as exampled in the installation manual, but nothing worked. I always got this error on the end of the unsuccesful installation: Move the extender closer to the existing router or gateway.

Im really sure the extender is in the range of my actual router!

I've tried everything from restoring to factory defaults to WPS, DPS, disabling security, Nothing works.. I always get stuck on the error. (With WPS I press both the buttons on the extender and the router, but they cant find each other.)

View 5 Replies View Related

NetGear Range Extender Lost Password?

Jan 30, 2013

I purchased the latest range extender, but the password was not logged, so we cannot use the NetGear extender shown in the wireless network list.

View 3 Replies View Related

Can Use Netgear WGR 614 As Range Extender Of Another Wireless Router

Jun 14, 2012

Can I use netgear WGR 614 as range extender of another wireless router?I already using a model with wireless router, i have a spare netgear WGR 614. I want this router to pick up wireless signal from the first wireless router then share the internet on ethernet port only.

View 4 Replies View Related

Netgear Router Won't Work With Verizon Extender?

Apr 5, 2011

I have a Netgear wnr2000 v3 wirless router. Im trying to get the Verizon Samsung Network extender to work on it. I am using a ethernet cable not wireless. When i go into the Netgear's Control panel and click attached devices it does not show it and it wont work. I called verizon and they gave me port numbers to put it in the port fowarding but you need the IP address which i dont know

View 3 Replies View Related

Routers / Switches :: Netgear Wn3000rp Extender Does Not Work?

Apr 5, 2012

basically, my iMac detects the extender as routername_EXT which is fine, but says that the password i type is wrong. when i use my original router with my iphone with the same password it works, but when i try to use it with my extender it says that the password is wrong.

View 1 Replies View Related

Netgear WN2000RPT Wireless Network Range Extender?

Aug 9, 2011

I recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.

View 2 Replies View Related

Netgear WN2000RPT / Wi-Fi Range Extender / Repeater Recommendations

Jul 17, 2011

I recently bought a Netgear WN2000RPT from Best Buy and I couldn't manage to get past the setup (wouldn't connect with my existing router), and I'm returning it tomorrow.

I just need to repeat the wireless-G signal downstairs to the other side of the house upstairs.What are your recommendations?

View 1 Replies View Related

Netgear N300 - Configuring Extender And Router For Limited Access

Mar 26, 2013

I have a Netgear N300 and am using a linksys wrtg54g flashed with dd-wrt as an extender. I would like to setup my wireless network to limit various devices (laptops, iPod touch, etc) to certain times of the day.

How do I configure both devices to limit connectivity? I've got it down pretty much on the NetGear using a MAC address filter and scheduling the services, but I am not sure how to get the extender to do the same.

View 3 Replies View Related

Linksys Wireless Router :: Using The E4200 And NetGear WNDR3400 As Extender?

Jul 31, 2011

Familiar with the WNDR3400 but I purchased it when it first came out only to replace it with my E4200. The WNDR3400 has a "wireless repeater function" and I was wondering if it was in any way compaitable witht he E4200 or does it have to be directly connected to use it as an accesspoint/range extender ?

View 4 Replies View Related

Netgear WNDR3700 Router - Using Wi-Fi Extender / Different Band With Same Network SSID?

Jul 7, 2011

I have basically the following setup: It's a home network, running with a Netgear WNDR3700 wireless router.

Wireless Devices on the Network:
Google Nexus One: 802.11 b/g/n
iPhone (Original): 802.11 b/g
Main Workstation Laptop: 802.11 a/b/g
"Beater/Other" Laptop: 802.11g b/g

Ethernetted devices on the network:
Logitech Revue: CAT-5e

I'm running both the 2.4 GHz and the 5.0 GHz networks over the same SSID. The goal, obviously, is to get everything over to N if possible. I've heard that wireless N has much better signal and transfer rates, is this true? Also, is running the two different frequencies with the same SSID problematic? It's kind of strange, because my Nexus One is having a difficult time staying connected to the network in my office while the main workstation laptop in the same room is getting a much better signal.

[Code]....

What's interesting is that both are running on the 2.4 GHz networks, essentially both not on the wireless n network, which kind of defeats the whole purpose of things. Is it bad to run both the 2.4 and 5.0 GHz networks with the same SSID? If using a network repeater, is it bad to rebroadcast the original network with the same SSID as the source network? It seems that the 5.0 GHz network is getting "clobbered" by the 2.4 GHz network. Is it really necessary for me to broadcast using different SSIDs?

View 1 Replies View Related

Set Up Wr841nd As Wifi Extender?

Feb 23, 2013

I bought this router to extend my wifi signar from my cable router. Now I know that it is possible using the WR841ND as an wifi extender using third-party firmwares but what I like to know is if there is any way to make the router work like that but using the original firmware. I followed a guide that explained how to do it but the only thing I can do is extend the wireless signal without the internet acess.

View 1 Replies View Related

Wifi Extender Taking Over Router

Jun 1, 2012

I installed a tp link extender to boost wifi at home (2 storey) and since then I have noticed that upstairs where the router is installed the signal is weaker than downstairs where the extender is located.

View 2 Replies View Related

Wifi Extender Or Upgrade To N Router?

Dec 29, 2012

At the moment the Wireless Router is located in my bedroom which is 12 meters from the living room where the phone line is. I basically have one phone line extension from the telephone line to my bedroom where I've plugged in the ADSL filter. The modem part plugs into the actual router and the telephone line is then extended back to the living room with a second extension cable.This is because my PC is in my bedroom. Problem with this is the fact that there are extension cables get in the way when moving furniture around and also hang from the ceiling in the corridor.What I'd like to do is have a WiFi dongle for my PC and move the router to the living room. Now my second problem is that my phone gets a very weak WiFi signal once you go to the living room so I imagine if I moved the router to there then I would barely get a signal in my bedroom. I have two options to solve this:

(1) Use a WiFi extender in between my room and the router and then a dongle for my computer

(2) Upgrade my current G router to an N router. Problem is I'm not too sure the signal will reach my room. There's a 12 meter range from the living room to my bedroom btw.url...

View 4 Replies View Related

Will Any Wireless Router Work As A Wifi Extender

Jan 5, 2013

buying a wireless router to use as a wifi extender as the signal is weak upstairs. At the moment my pc upstairs is connected by ethernet cable, I'm thinking of connecting a router upstairs to this ethernet cable to have good wifi upstairs. And my pc does have wifi so I will use that.

View 1 Replies View Related

What Wifi Extender Will Work With A 2wire 707 380 1hgv

Feb 7, 2012

What Wifi Extender will work with a 2Wire 707 380 1HGV?

View 2 Replies View Related

Will Wifi Range Extender Affect Signal Of Router

Jan 22, 2011

Will a Wi-Fi range extender affect (i.e., reduce) the signal of the router? How does the throughput signal compare between where it originates and where it ends?

View 2 Replies View Related

Wifi Range Extender Versus Wireless Router?

Aug 16, 2011

I have a wireless modem but its a sucky one. It was one of those free ones from verizon. Anyways, I don't get good signal in certain places in my house, so i am interested in knowing which would be better a wifi range extender or a good wireless modem.

View 1 Replies View Related

Belkin Routers :: Name Of N600 Db Wifi Range Extender

Feb 17, 2013

Can N600 DB Wi-Fi Range Extender have the exact same name as my N600 DB Router or does the extender have to have the additional characters "_xt" at the end of the extender name, when the first part matches the router name?

View 1 Replies View Related

Connected To Public Wifi With A Range Extender And Now No Internet Access

Jan 15, 2012

I work at a Public Safety building in Pennsylvania and our employees here share a Wifi connection with a local hospital facility that is in a industrial park behind us. The room we work in is able to access the Public Wifi but only half of the room has a good connection. I went to the local computer store and purchased a Belkin Dual-band wireless Range Extender and got it all set up, now I have the Public Wifi Extention access and it will connect to it but it has no internet access. Now we have no access to the administor or the network from our facility. How do i get internet access thru this range extender? If i connect from the good half of the room to the Public wifi i have a good connection with internet access but as soon as you put it thru the extender no more internet access.

View 1 Replies View Related

Wireless :: Can't Install Zyxel Wifi Extender Bt Disabled Wps Button Hub 3

Nov 24, 2012

Bought the Zyxel Wireless Range Extender to get wifi in farthest rooms in my house but set up is not working because BT have disabled WPS button on Home Hub 3 with my Infinity. Therefore they suggest I try manual set up. This requires browser wtih IP address 192.168.1.2 for Zyxel wireless extender WRE2205, This gives no result (page does not load in IE).

View 1 Replies View Related

Linksys Access Point :: Wifi Extender Compatible With Wag120n?

Dec 21, 2012

I need a wifi extender for wag 120n , and i want to connect it with WDSI use wag 120n as main and only modem and access pointWhat is the best and cheapest device for me?

View 1 Replies View Related

Linksys Wireless Router :: E1550 Connecting To Wifi Extender?

May 14, 2012

My objective is to use the USB port on the E1550 to share an external hard drive for my family's shared media files.I have moved into a rental home with little cat5 wiring.  Internet service is Uverse.Given the wiring situation, I bought a netgear universal dual band range extender which connects wirelessly to the uverse router in another room.  My home office equipment (computer, printer) are wired into the netgear. All of that works fine.  The netgear is 192.168.1.66. The computer is 192.168.1.128. So, I wanted to add the E1550 into my network.  I can see it as an attached device on the Netgear's admin page, but cisco connect and a direct ip http://192.168.1.68 does not resolve.  I have the e1550 connected via a lan port on the netgear extender (there is no other option).  I have gone from that lan port to the internet port on the e1550.  I have done so with a staight Cat5 cable and with what I believe should be a cross-over.   In both situations, I see the router via the netgear admin page but can not connect to it.   I'd prefer not the hang my usb drive off of my computer because it if gets turned off or reboots due to a MS Windows auto update, it leaves the rest of the house with no shared media during that process.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved