I recently bought a Netgear WN2000RPT from Best Buy and I couldn't manage to get past the setup (wouldn't connect with my existing router), and I'm returning it tomorrow.
I just need to repeat the wireless-G signal downstairs to the other side of the house upstairs.What are your recommendations?
ADSL Box in office ground floor - Range extender in 1st floor lounge - portable Win7 64 in dining room next to lounge (1st floor) Setup proceeds and completes as it should but the problem: The portable connects to the new link *_EXT but with "no access" (the extender is not connecting to the router). Having read several reviews about connection problems with this kit, none seem to have the problem I have.
View 10 Replies View RelatedI recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.
View 2 Replies View Relatedgoing to be setting up my cable modem and Asus RT-N66U router in my basement in the work room/laundry room. My townhouse is 3 stories tall so just in case I wanted to look at my options for a range extender or repeater.
View 1 Replies View RelatedI am moving my office from one side of the house to the other which has real spotty wireless coverage. Most likely I will not be able to move the modem or wireless router, so I have to somehow increase the range.I did some research and poking around on forums, but I can't find a clear cut, number 1. What you think would be the best option to pair with the DIR-655.
View 1 Replies View RelatedCan I use the WIRELESS 150 ROUTER DIR-600 as repeater or WLAN range extender?
View 1 Replies View Relatedi have beetel adsl2+router connected to my main computer through ethernet cable but its wifi signal is very low. its signal hardly reach the other end of my house where my bedroom is, and i want to surf on my laptop or mobile from my bedroom only so basically i want to extend my wifi range or boost the signal the thing is i have a belkin f7d1301 basic n150 wireless router, i want to know whether i can use it as range extender or any other thing to boost my signal.
View 7 Replies View RelatedRegion : Singapore
Model : TL-WR700N
Hardware Version : V1
Firmware Version :
Since i know there's a "Repeater Operation Mode" in TL-WR700N Wireless Lan Mini Pocket Router, so what's the difference between TL-WA850RE WiFi Range Extender?I know the maxium speed support is different, but.... what else ?
I purchased the latest range extender, but the password was not logged, so we cannot use the NetGear extender shown in the wireless network list.
View 3 Replies View RelatedCan I use netgear WGR 614 as range extender of another wireless router?I already using a model with wireless router, i have a spare netgear WGR 614. I want this router to pick up wireless signal from the first wireless router then share the internet on ethernet port only.
View 4 Replies View RelatedI'm running Windows Vista on PC. Have a Netgear router. Just bought Netgear range extender WN3000RP. Have the extender plugged in and light is green. When I try my PC's wireless network manager, it does not recognize any wireless devices to add. How can I connect to the extender wireless network when it is not recognized on my wireless manager??
View 1 Replies View RelatedI have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies View RelatedI have just purchased a Netgear WN3000RP wireless extender.The security setting on all devices on the existing network show as WPA2-PSK wireless n but the extender comes up as WPA-PSK wireless g although the instructions say it will copy existing security settings.There is supposed to be a Netgear website to log on to an installation wizard but this doesn't work and appears not to have worked for some months.Why are Netgear still selling this device without an installation disc when they must know by now that their site doesn't work?Is there any way to alter the security setting of the extender?
View 10 Replies View RelatedI have a new Netgear WN2000rpt extender and cannot get past passphrase on the install wizard...nothing happens after I enter my passphrase and select "continue"..
View 1 Replies View RelatedI struggle getting a wireless internet signal in some parts of my house downstairs and all upstairs. Is a wireless router or repeater the same thing and which do I need.
View 3 Replies View RelatedDo I have to hard wire both routers to use cascading routers technique? I've been reading up on how to do this, but have not yet quite tried. I know someone will say extender and/or repeater, but I want to know if I can use a second router to extend the wireless signal further; i.e., bounce it from modem/gateway/wireless router (dlink) to wireless router (linksys wrt160n) then to my laptop? I have to go from one building to another and currently the wireless signal is quite weak (hence, someone will likely say repeater/extender). I already have the linksys. The dlink belongs to someone else, but I have permission to access through their dlink. I can do the initial setup, connecting LAN (main router - dlink) to WAN (2nd router - linksys), but I cannot leave them connected.
View 9 Replies View RelatedCan I use a 625 as a range extender? And if I can how do I do it?
View 3 Replies View RelatedI have a Cisco Aironet 1041 , what a good repeater/wireless extender that works with it to cover an area of 50 squared meters ?
View 4 Replies View RelatedI got myself a HW500G as my main Wireless router. But as I moved to a new home with a very large space, I did start to have alot of dead spots which made me think about getting my old WAG200G out of the box and use it as Wireless extender.Is that possible with WAG200G and If yes, can you provide me with guidelines on how to do so.
View 2 Replies View RelatedLittle info on my setup as is: Comcast ISP Internet Modem with the wireless gateway built in. I live in a faily large house and am out in my garage a lot where the signal is sub-par, id also like to have internet out in my yard without it sucking.
I have an extra linksys wrt45g sitting in my garage...could I use that someway to extend the range of my wifi? The signal from my main gateway is wireless N.
I have a Sitecom WLR 4000 wireless router. I also have a Linksys Wireless G Accespoint. Can I use that AP as a extender/repeater for the Sitecom router? If yes, how to configure one and other?
View 4 Replies View RelatedI currently have a Belkin router and a Belkin range extender. I have the router downstairs and the extender upstairs. Right now the router operates as <SSID> and the extender is <SSID> Alt. I would like to use them both as <SSID>, and have them work together. For example, I use the Wifi downstairs on my laptop, I walk upstairs, and I don't have to change over to the other network. It would switch automatically to the stronger signal.
View 5 Replies View RelatedI have a Cisco Valet+ AP. I have added an Engenius Range extender, big house, (actually a B&B). The setup seems to have gone well (ranger extender linked to AP). Is there a way that I can verify that a PC in the big house away from the AP is actually connected to the Range Extender.
View 1 Replies View RelatedI started out with a wireless router/modem that my ISP provides as its default modem. It was and still is working fine. We will call this router A. My uncle who is living with me wasn't receiving the wifi signal in his room so he went and bought a different router that is supposed to have more range. Also, I believe it is capable of providing higher speeds wirelessly, but that is really irrelevant I think. We can call this new router B. I currently have router B running through router A with an ethernet cable into a LAN port- LAN port to LAN port. I basically want B to be a wireless range extender.My question is quite simple actually. I have everything up and running just fine, but it seems as if the wireless signal may still be coming from the old router A.
View 5 Replies View RelatedI just bought belkin range extender and I can't get it connected to my network because the 192. page won't open?
View 1 Replies View RelatedI saw at the Linksys page and saw Access Point was under the Range Extender.Is the Access Point part of the Range Extender?
View 11 Replies View RelatedI am a university student and my building is made of concrete so I get pretty spotty wireless (lag at 9000+ ping on games?!). To improve my connection quality I was recommended the Alfa AWUS036NHR USB network adapter [URL]. The adapter itself works marvelously but here's the problem: when I install the adapter, the existing wireless drivers on my laptop fail and I cannot use the internal laptop NIC even when the adapter is unplugged. It says the device is ready but does not detect any networks. When I reinstall the NIC drivers, the adapter doesn't work anymore.Device manager still shows both drivers installed and running but the corresponding NIC/adapter won't detect any networks.
What I have tried:
-Disabling the other driver, reinstalling other driver
-Disabling a functioning driver to attempt to get the other device to work
-Trying different versions of the drivers--a longshot I know
My hardware:
Internal NIC:: Realtek RTL8723A Wireless Lan 802.11n USB 2.0
External adapter: Alfa AWUS036NHR using Realtek RTL8192C USB 802.11B/G/N 300M Wireless NIC drivers for Windows 8
Laptop: Lenovo Yoga 13 (i7 version), no ethernet port available, Windows 8 Pro
can I use both of them (not at the same time) without having to reinstall drivers each and every time I switch?
i purchased the belkin i described in the title of this post. It instructs me after connecting it to my pc that i should go to web page "[URL] it comes up that there is no site for this address. I can't use this extender until i visit the web to set it up.
View 2 Replies View RelatedI just replaced my DIR-655 with a DHP-1320 since the constant microwave usage in our house whacks out our wireless during breakfast and dinner time. Now the PCs on the other side of the house are connected over a Home-Plug network.Is there a way to connect the DIR-655 to one of the Home-Plug ports on the distant side of the house to "extend" the wireless coverage there for our laptops? Presume this is a different scenario than creating a "bridge", "access point", or "extender" since the router would be connected back via Ethernet cable. There may be some overlap too in wireless coverage around the middle of the house. Ideally I'd like to use the same SSID.Has this ever been done before? What would I need to reconfigure on the DIR-655?
View 5 Replies View Relatedstill trying to improve my signal to a Roku unit in a New York aparment (about 60 feet away BUT throught several walls) Cannot see the 5MhZ and the 2.4 is weak. Had been recommended the D Link DAP 1360 but it seesm older and gets lower rating on Amazon. An extender that gets higher ratings is the HAWKING HWREN1 (PS also seems older -- 2004...)
View 4 Replies View RelatedOn instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.
View 4 Replies View RelatedThe BT Infinity Hub (fibre optics to the cabinet one) plugs into a router and I tried connecting via ethernet cable to both without result, still no set up page from [URL] either with wi-fi off or with wi-fi on in the "Currently connected to:" window.
View 1 Replies View RelatedWill a Wi-Fi range extender affect (i.e., reduce) the signal of the router? How does the throughput signal compare between where it originates and where it ends?
View 2 Replies View Related
