Wireless :: Netgear Wn2000rpt Cannot Get Past Passphrase
Jun 19, 2011I have a new Netgear WN2000rpt extender and cannot get past passphrase on the install wizard...nothing happens after I enter my passphrase and select "continue"..
View 1 Replies
ADVERTISEMENT
Netgear WN2000RPT Wireless Network Range Extender?
Aug 9, 2011I recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.
View 2 Replies View RelatedNetgear Wifi Range Extender Wn2000rpt?
May 21, 2012ADSL Box in office ground floor - Range extender in 1st floor lounge - portable Win7 64 in dining room next to lounge (1st floor) Setup proceeds and completes as it should but the problem: The portable connects to the new link *_EXT but with "no access" (the extender is not connecting to the router). Having read several reviews about connection problems with this kit, none seem to have the problem I have.
View 10 Replies View RelatedNetgear WN2000RPT / Wi-Fi Range Extender / Repeater Recommendations
Jul 17, 2011I recently bought a Netgear WN2000RPT from Best Buy and I couldn't manage to get past the setup (wouldn't connect with my existing router), and I'm returning it tomorrow.
I just need to repeat the wireless-G signal downstairs to the other side of the house upstairs.What are your recommendations?
Locate The WPA Passphrase For Netgear 7550 Gateway?
Jan 21, 2013locate the WPA passphrase for netgear 7550 gateway?
View 2 Replies View RelatedMy Wireless Not Able To Get Past Ping
Nov 12, 2011while trying to hookup wireless cant det past gateway ping on test. Iv'e used addresses given to me by net gear.
View 5 Replies View RelatedLinksys Wireless Router :: WRT160N V2 - Setup Cd Won't Get Past 25%
Jul 26, 2012setup cd won't get past 25% and says not connected to the int! but yes i am .Also tryin to bridge with ATT PACE 4100n crapp!
View 2 Replies View RelatedSetup A Security Password Or Passphrase For Wireless Internet?
May 3, 2011I have windows vista and a Atheros adapter?is there a way to just go through control pannel?
View 2 Replies View RelatedCan't Connect To A Wireless Network With Laptop / Security Key / Passphrase
Apr 1, 2011i cant connect to a wireless network with my laptop coz it keeps coming up with enter security key or passphrase
View 2 Replies View RelatedLinksys Wireless Router :: How To Change Passphrase On WRT160N V3
Sep 17, 2012A few months ago, I purchase, installed and configured a WRT 160N V3. And I couldn't be happier. I now would like to go back and change the passphrase that a user needs to enter when they connecting to my router. Currently it uses the default value. And I would like to make it a bit more friendly. I found a number of postings dealing with setting retrieving or changing the Admin password.
But I was not able to find anything on changing the “passphrase”. There probably are a number of postings on the subject, and I simply overlooked them.
Linksys Wireless Router :: Difference Between Password And Passphrase?
Dec 16, 2011Is there a difference between (1) the Router Password (on the Admin tab of the web-based utility), (2) the Wireless Security Passphrase (on the wireless security tab of the web-based utility) , and (3) the password on the Router Settings in the Cisco Connect application?
View 2 Replies View RelatedLinksys Wireless Router :: Finding Security Key Or Passphrase?
Dec 28, 2007My wife has a laptop that we want hooked up to the internet through our linksys wireless router. But I cannot remember my security key or passphrase needed to get her on the connection. How do I recover, or find, it?
View 9 Replies View RelatedCisco Wireless :: 5508 - WLC Not Pass DHCP Past Bridged Units
Jun 26, 2012I have a WLC 5508 with LWAP 1242 with wireless bridges connected to the APs I cannot get DHCP to pass through the bridge to the PC connected to the bridge.
View 5 Replies View RelatedLinksys Wireless Adapters :: WRT54GS - Cannot Enter WPA2 Passphrase
Mar 10, 2013After a lot of effort I got my wireless adapter to work like it should without security. I set WPA 2 level security on my WRT54GS wireless router and then went to access the router (set up as an access point) with the WPC54G ver 2 adapter on a Thinkpad T22, it says I have WEP encryption and I cannot enter the passphrase I used for the router. It does not let me select AES. It says to pick AES or TKIP, but TKIP is the only choice.
View 1 Replies View RelatedHow To Get Past Router Firewall
Feb 9, 2011I need to get past a Cisco firewall my roomate set up on our internet. I have zero access to the internet, and cannot access a website like Vtunnel to get around it.
View 2 Replies View RelatedHow To Know The Network Key Or Passphrase
Feb 19, 2011i forget the network secutity key
View 1 Replies View RelatedCannot Get Past Password / Way To Bypass Security
Aug 3, 2012Im stuck working on a moderm, its a speed touch 536 (old school) i cannot get past a password.. Im trying to set this bad girl up with a router, setting up routers in my specialty.Im trying to bridge the modern but on the setup page there is a password, i dont know if its factory or what.. ive tried many of common passwords for networking like (admin/admin, Admin/ Admin, Admin/Password) ive tried everything i can think of. so i need a way to bypass the security. Flashing the software maybe?Ive found a software uploader for it, but i cant find the original firmware for the modern.
View 3 Replies View RelatedHow To Check Past Facebook Login
Oct 6, 2012I recently had my facebook hacked,how can i get the last few ip address.
View 1 Replies View RelatedTo Find Wpa Security Passphrase
Dec 30, 2012I can't print from my wireless printer. It wants to know my WPA security pass phrase. Where do I find this?
View 3 Replies View RelatedFind Wpa Security Passphrase?
Apr 25, 2012where do i find the wirelesswpa security passphrase
View 1 Replies View RelatedCisco 2691 - Can't Ping Past Gateway
Oct 24, 2012I've spent the last two days working on this problem and it is killing me! I know the answer has to be something simple, but despite hours of searching and trying different things, I just can't seem to fix it.Essentially, I am going to be installing a Cisco 2691 and use it as the default gateway for a small business. It will be directly connected to a cable modem with a static IP. The other Ethernet interface is going to connect to a 2950 switch with a couple different VLANs.
The problem I'm having is that I can ping anything external from the router itself. From the clients connected to the 2950, I can ping IPs in other VLANs, and I can ping up to the IP of the external interface, but no pings go beyond that.I've set up NAT overload on the router, and when I do a debug ip nat, I see the pings trying to get through with the proper translations, but I still don't receive ICMP replies back.I set up GNS3 to simulate what I'm trying to accomplish (since it emulates a 2691). Attached is a jpg of the topology -- on the right is the "simulated ISP" with 3 loopback networks and one host on a different subnet. The 2691 has a static route to the "Internet" router, and can ping everything attached to the router, including the host. The host (5.5.5.5) can also ping the outside interface of the 2691 (50.50.50.2).
However, the hosts behind the 2691 can't ping past 50.50.50.2. The 192.168.0.x network can be ignored, because that network won't need to access the Internet. But the 10.10.20.x (VLAN 20) and 10.10.30.x (VLAN 30) networks will need to. In the simulation, the hosts are 10.10.20.5 and 30.5. They can ping each other, their default gateways, and the 2691 outside interface (50.50.50.2) but not the other side, the "Internet" router at 50.50.50.1 or beyond.
[code]....
Finding Security Key Or Passphrase For Wifi?
Apr 28, 2012I have had to re format vista and reload my WiFi. My internet connection using an ethernet cable to my LAN works ok but when the ethernet cable is removed and I click "connect" I am asked for my security key or passphrase. How do I find this information or preferably remove the request for it?
View 1 Replies View RelatedReconfigure Passphrase Configured On HP Printer?
Mar 2, 2011I need to re-configure the passphrase configured on my HP printer.How do you run the wireless network set-up in order to re-enter my wireless network WPA security passphrase?
View 1 Replies View RelatedHow To Change Passphrase On Linksys E1000
Mar 16, 2011I have a passphrase for my router that I need changed but I don't know how. I was told that if anyone knows my phrase word that they can access my router.
View 1 Replies View RelatedCabling / Cards :: Cat5 Not Working Past 25Ft
May 22, 2012We are setting up a network in our new house. We have the internet entering the garage. From there we have a 60 ft Cat 5 cables run through the crawl space. Orginally we had the wireless router attached to the end of the cat 5 and then attached to the computer. We could not get a connection through this wire. We then took out the cable, and ran a new one, same issue. We took the same cable, cut it down to 25 feet, installed the router in the garage and we have an excellant connection. We then ran a new wire through the crawl space from the router. Same issue, no connectivity. Taking that cable out, cutting it down we ran the wires from the router to our computers in the garage. why a Cat5 cable would not work at 60Ft.?
View 6 Replies View RelatedNot Able To Share Files With Computers Past My Client Bridge?
Aug 5, 2012I am not able to share files with computers past my Client Bridge. I can see one computer past the bridge in my network and two more can see but all have internet, but still can not access ant to get to their shared folders. Do not know if operating systems would made a difference, I main computer run Windows 7 Pro 64 bit. all the rest run XP Home. Have two computers before the bridge no problem there.
View 2 Replies View RelatedCisco VPN :: ASA 5510 / Cannot Ping Or Access Anything On The LAN Past The Firewall
Jan 9, 2012The VPN will connect.I can ping and connect to the ASA 5510 on it's LAN interface.My problem is that I cannot ping or access anything on the LAN past the firewall. What am I doing wrong?
Here is my config.Result of the command: "show config"
Saved
: Written by enable_15 at 22:55:02.299 UTC Tue Jan 10 2012
!
ASA Version 8.2(5)
!
hostname ********
[code]....
Cisco WAN :: 2610 / Windows 7 Can't Ping Past Local Interface
Jul 18, 2012Ive got my home lab setup with two 2610 routers hooked togeather with a DTE/DCE Crossover and I have OSPF configured on both routers. Each router has one 3550 switch connected to each FA0/0 inteface. The issue is that Everything can be pinged except my windows 7 PC connected to the R1 LAN. Everything else can be pinged from any other device. I checked the PC gateway configuration, disabled the firewall and checked my switch configuration! Is their something that I need to change in Windows?
Windows PC ------------ 3550 Switch-------------R1-----------------------------------R2---------------------3550 Switch----------------------Linux Box
Windows PC can't ping past the FA0/0 interface between the switch and R1
Belkin Routers :: How To Reset Passphrase Or Network Key On N300
Dec 24, 2012I've just hooked up my previously used N300 router. The router is showing a solid green light, and the laptop recognizes that a solid Belkin wireless connection is out there. I cannot for the life of me remember the network key and/ or pass phrase I originally set. No, I did not tape this info to the underside of the router as suggested in Belkin instructions.
View 6 Replies View RelatedCisco Switching/Routing :: 3850 System LED Blinking Fast - Not Getting Past POST?
May 14, 2013I pulled a brand new Cisco 3850 Switch out of the box yesterday. Following the Quick Start Guide, I put in the power module, powered it on, and waited for it to complete POST. Then, I plugged in an Ethernet cable between a laptop and the switch on a port in the front, and went to the web interface at https://10.0.0.1. I got to the Express Setup, and attempted to change the IP address of the switch to an IP on my LAN, along with other options. When clicking submit, it didn't appear to take. Upon refreshing in the Express Setup, the IP config was blank, so I once again configured it. This time clicking submit brought up a message that it was changing the IP address. I waited for it to finish, and when it looked done, I powered the switch off and took it to a different room to hook it up to the LAN for further configuration.
When plugging in the power at that point, the switch starts through the normal light process (System LED blinks green slowly), and then eventually the System LED blinks green very fast and never stops. It doesn't get to the point of having the system loaded and ready to log into. There's no amber lights, just the System LED flashing green fast. On the back, the Power module and all bay lights are green, and the Console light is green, but the Management port light is off.
I've tried using the reset button on the back of the switch two different times to reset it to default configuration, thinking I hosed it somehow, but it never goes past the fast blinking System LED.
Netgear WNR3500L Wireless Router / Wireless G Delivers Faster Broadband Than Wireless N?
Oct 29, 2012I have a Netgear WNR3500L wireless router. I assume it's v1 because on the back it doesn't have "v" anything. Firmware version V1.2.2.44_35.0.53NA.When I connect using g I get 22+Mbps download speed. When I connect using n I get 10 Mbps. I've tried using both WPA2 only (laptop reports 130 Mbps connection I believe) as well as the combo WPA+WPA2 (laptop reports connection of 117 Mbps).Broadband download results don't change - they stay at the 10 Mbps level. I've fiddled with some of the settings on my laptop's wireless card - but the results are the same.For now I'm just trying to figure out where I should focus my investigation and fiddling efforts - on the laptop or on the router.
View 5 Replies View RelatedNetgear N600 Wireless ADSL2+ Router / Wireless N Compared To Wireless G 10mb/s?
Jan 6, 2013i have a Netgear N600 Wireless ADSL2+ router on wireless a/b/g/n dual band and all that but what i want to know is will i get better performance if i use a WirelessN card over G on a 10 - 15mb/s connection gaming wise and will it b a great increase over the G causeif its not a HUGE increase then i wont waste my money on a newer card?
View 3 Replies View RelatedNetgear USB Wireless Not Connecting
Jun 9, 2011I cannot get my USB N adapter to connect with a u-verse G router
View 4 Replies View Related
