Netgear WN2000RPT Wireless Network Range Extender?
Aug 9, 2011
I recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.
View 2 Replies
ADVERTISEMENT
May 21, 2012
ADSL Box in office ground floor - Range extender in 1st floor lounge - portable Win7 64 in dining room next to lounge (1st floor) Setup proceeds and completes as it should but the problem: The portable connects to the new link *_EXT but with "no access" (the extender is not connecting to the router). Having read several reviews about connection problems with this kit, none seem to have the problem I have.
View 10 Replies
View Related
Jul 17, 2011
I recently bought a Netgear WN2000RPT from Best Buy and I couldn't manage to get past the setup (wouldn't connect with my existing router), and I'm returning it tomorrow.
I just need to repeat the wireless-G signal downstairs to the other side of the house upstairs.What are your recommendations?
View 1 Replies
View Related
Jun 14, 2012
Can I use netgear WGR 614 as range extender of another wireless router?I already using a model with wireless router, i have a spare netgear WGR 614. I want this router to pick up wireless signal from the first wireless router then share the internet on ethernet port only.
View 4 Replies
View Related
Jan 30, 2013
I purchased the latest range extender, but the password was not logged, so we cannot use the NetGear extender shown in the wireless network list.
View 3 Replies
View Related
Jan 2, 2012
I have just purchased a Netgear WN3000RP wireless extender.The security setting on all devices on the existing network show as WPA2-PSK wireless n but the extender comes up as WPA-PSK wireless g although the instructions say it will copy existing security settings.There is supposed to be a Netgear website to log on to an installation wizard but this doesn't work and appears not to have worked for some months.Why are Netgear still selling this device without an installation disc when they must know by now that their site doesn't work?Is there any way to alter the security setting of the extender?
View 10 Replies
View Related
Dec 25, 2012
I'm running Windows Vista on PC. Have a Netgear router. Just bought Netgear range extender WN3000RP. Have the extender plugged in and light is green. When I try my PC's wireless network manager, it does not recognize any wireless devices to add. How can I connect to the extender wireless network when it is not recognized on my wireless manager??
View 1 Replies
View Related
Jun 19, 2011
I have a new Netgear WN2000rpt extender and cannot get past passphrase on the install wizard...nothing happens after I enter my passphrase and select "continue"..
View 1 Replies
View Related
Apr 9, 2012
I have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies
View Related
Aug 31, 2012
I currently have a Belkin router and a Belkin range extender. I have the router downstairs and the extender upstairs. Right now the router operates as <SSID> and the extender is <SSID> Alt. I would like to use them both as <SSID>, and have them work together. For example, I use the Wifi downstairs on my laptop, I walk upstairs, and I don't have to change over to the other network. It would switch automatically to the stronger signal.
View 5 Replies
View Related
Jan 1, 2011
I just got a new hawking N range extender to run on our network. My parents just got a new Internet Ready TV for the holidays but the wireless doesn't reach to their room. I ordered this range extender to boost the signal from our Linksys E2000 router. I was having a hell of a time setting it up last night. I was hoping that I could have them both use the same SSID so they would basically be the same network with all of our laptops/iPhones/iPads seamlessly switching to the strongest signal. (Router is in basement, extender is on the main floor). Unfortunately just setting them up with the same name and WPA key doesn't work as easy as I thought it would. So as of right now I have the extender set up as a different network name and it is working great. (router SSID = name, extender SSID = nameE) I just want to know if there is a way to make it work with the same SSID. I've been trying to research and have come across forums saying they need to have ALL the info the same (SSID, PassKey, Channel) and others saying the channels need to be different.
Right now I left the extender setup with the default IP and made it static so I could access the web interface again because the CD installation that came with it is absolute garbage (you can't change the broadcast channel with it). I can get into the settings easily by using 192.168.1.240 but I am weary to try to change things around again because I already have set up and reset this guy at least 5 times.
View 1 Replies
View Related
Jan 17, 2013
Can I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?
View 4 Replies
View Related
Jun 16, 2012
I started out with a wireless router/modem that my ISP provides as its default modem. It was and still is working fine. We will call this router A. My uncle who is living with me wasn't receiving the wifi signal in his room so he went and bought a different router that is supposed to have more range. Also, I believe it is capable of providing higher speeds wirelessly, but that is really irrelevant I think. We can call this new router B. I currently have router B running through router A with an ethernet cable into a LAN port- LAN port to LAN port. I basically want B to be a wireless range extender.My question is quite simple actually. I have everything up and running just fine, but it seems as if the wireless signal may still be coming from the old router A.
View 5 Replies
View Related
Jul 7, 2011
I have basically the following setup: It's a home network, running with a Netgear WNDR3700 wireless router.
Wireless Devices on the Network:
Google Nexus One: 802.11 b/g/n
iPhone (Original): 802.11 b/g
Main Workstation Laptop: 802.11 a/b/g
"Beater/Other" Laptop: 802.11g b/g
Ethernetted devices on the network:
Logitech Revue: CAT-5e
I'm running both the 2.4 GHz and the 5.0 GHz networks over the same SSID. The goal, obviously, is to get everything over to N if possible. I've heard that wireless N has much better signal and transfer rates, is this true? Also, is running the two different frequencies with the same SSID problematic? It's kind of strange, because my Nexus One is having a difficult time staying connected to the network in my office while the main workstation laptop in the same room is getting a much better signal.
[Code]....
What's interesting is that both are running on the 2.4 GHz networks, essentially both not on the wireless n network, which kind of defeats the whole purpose of things. Is it bad to run both the 2.4 and 5.0 GHz networks with the same SSID? If using a network repeater, is it bad to rebroadcast the original network with the same SSID as the source network? It seems that the 5.0 GHz network is getting "clobbered" by the 2.4 GHz network. Is it really necessary for me to broadcast using different SSIDs?
View 1 Replies
View Related
Mar 8, 2013
I just bought belkin range extender and I can't get it connected to my network because the 192. page won't open?
View 1 Replies
View Related
Nov 6, 2012
i purchased the belkin i described in the title of this post. It instructs me after connecting it to my pc that i should go to web page "[URL] it comes up that there is no site for this address. I can't use this extender until i visit the web to set it up.
View 2 Replies
View Related
May 7, 2011
On instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.
View 4 Replies
View Related
Nov 24, 2012
The BT Infinity Hub (fibre optics to the cabinet one) plugs into a router and I tried connecting via ethernet cable to both without result, still no set up page from [URL] either with wi-fi off or with wi-fi on in the "Currently connected to:" window.
View 1 Replies
View Related
Aug 16, 2011
I have a wireless modem but its a sucky one. It was one of those free ones from verizon. Anyways, I don't get good signal in certain places in my house, so i am interested in knowing which would be better a wifi range extender or a good wireless modem.
View 1 Replies
View Related
May 1, 2012
I first want to say I "think" I might be posting in the wrong forums for this question, but because I'm not really sure what the proper terminology for this is, I thought it best to ask here.
I have recently upgraded my router for my home network from an old Linksys WRT54GS G router, to a new E2500 N router. I have heard/read that it is possible to reconfiqure my old router to act as a range extender for my network but I am unclear how to do so. I think this may be the same thing as an access point, but all the FAQ's I've found seem to have this work as a solo device, not as a device on existing network. I have my e2500 setup with the modem in my study and broadcasting from there, and would like to use my old G router set up as a range extender to be located in the front living room area and picking up the network signal and rebroadcasting from there without a modem or computer attached.
View 1 Replies
View Related
Dec 26, 2012
I have a WRT120N that doesn't provide a great signal in one corner of my house. I wanted to setup a Range Extender to allow it to reach that area better. I have tried looking around on here but am not having any luck finding one that says it will be compatible or how to set it up.
View 5 Replies
View Related
Nov 20, 2011
I am moving my office from one side of the house to the other which has real spotty wireless coverage. Most likely I will not be able to move the modem or wireless router, so I have to somehow increase the range.I did some research and poking around on forums, but I can't find a clear cut, number 1. What you think would be the best option to pair with the DIR-655.
View 1 Replies
View Related
Sep 18, 2010
I have a simple wireless network that works fine, except for one room where the signal is too low. So I purchased a WAP4410N to use as a range extender. provide the exact settings that are need to set this up? I have tried many, many different configurations, and I can't get it to work properly. In particular, it will not give me an IP address and therefore won't connect. Also, is it important to use the SAME SSID name? or better to use a different name so as not to confuse the two signals (base unit vs repeater (4410)).
View 1 Replies
View Related
Jan 29, 2013
Can I set up n600 db F9K1102v1 as wifi range extender with no rj45 cable?
Dont have cable infrastructure in section of building where i need net access.
Have a Cable/Modem (wireless) as main router and need to extend the signal using the N600DB - but without cat5 cable between modem/router & N600.
View 3 Replies
View Related
Aug 20, 2011
I'm a bit confused about what a wireless range extender gives me. I have bought a Sitecom Wireless Range Extender 300N. This extends the wireless range of your router to parts of the house that have a weak signal or none atall.
It is setup correctly and is working fine, however, the SSID is different from the Router.
Essentially, I want to extend the range of my router to parts of the house that have a low signal. This range extender seems to be the correct product to do this. However, I want my clients to switch to the appropriate wireless access point (either the range extender or my router) depending on the strongest signal, how can this be configured?
When a client is the overlap area (the area where both the router and the range extender can be sensed) I want the client to switch to the strongest signal.
In my case My Router is in the loft and the range extender downstairs. You can still get a low signal from the router when you are downstairs but the range extender give a full signal. However, I dont understand what makes a laptop 'switch' from router to extender when its downstairs.
Because the extender has a different SSID a laptop that can still get a low signal from the router when downstairs doesn't automatically attach to the extender to get a strongest signal.
If I set the extender to have the same SSID as the router
View 1 Replies
View Related
Oct 11, 2012
Can I use the WIRELESS 150 ROUTER DIR-600 as repeater or WLAN range extender?
View 1 Replies
View Related
Feb 1, 2013
My main router is connected to the modem and is an E4500 (upstairs on one end of house). It has a wired connection to the E2500 (downstairs on the other end of the house). I want the same SSID transmitted from both routers.
How do I configure the E2500 to transmit the same SSID as the E4500 to I ahve a consistant signal over the whole house?
View 2 Replies
View Related
Apr 10, 2012
I'm using the e4200 in a big old house with lots of walls, including rooms separated with brick. Wiring access points would be difficult given the problem of pulling wires. I do have lots of kids and devices connected including DirecTv, iphones, ipads, laptops, and PS3. Is there a range extender? Do I care if an extender only supports 2.4Mhz if I use the same SSID anyway?
View 5 Replies
View Related
Aug 26, 2012
I recently upgraded from E1500 to EA4500.Can I utilize my E1500 as a wireless range extender for the EA4500?I would like to setup my E1500 in my back bedroom to repeat the signal of the EA4500 in my living room.Can this be done wirelessly without connecting an ethernet cable between the two routers?
View 2 Replies
View Related
Aug 26, 2011
I have 8mbs down/1 mbs up service through a cable modem (WOW). We've been using a WRT320N wireless router with great success. I haven't checked true transfer rates, but when I do a speed test (url...), I pretty consistently get the speeds we are paying for. There's a room I wanted to use as an office but the signal didn't reach there. I just set up a WRE54G range expander. It is talking to the router and my compter. I have internet access but the speeds are considerably slower (<1mbs down/<0.4 mbs up) than what I get on the other computer that's talking directly to the router. I've looked for specs on data rates on the WRE54G and can't find them, but I can't image they're that slow. Can this be because I'm using a G expander with an N router?
View 1 Replies
View Related
Oct 2, 2012
I want to save energy. How can I turn off the Linksys N300 range extender at night. Can just unplug or will this screw things up.Is there a button
View 1 Replies
View Related
Dec 13, 2012
My samsung galaxy phone with android os connects to the weak signal of the far away router in stead of connecting til to range extender close by.Signal from extender is strong but the phone seems to have problems in obtaining the IP addres from the extender.Have returned to factory settings and made new setup - but still the same problem, and only with connecting tilthe Xyzel range extender 2205?
View 5 Replies
View Related
Apr 9, 2013
Region : Singapore
Model : TL-WR700N
Hardware Version : V1
Firmware Version :
Since i know there's a "Repeater Operation Mode" in TL-WR700N Wireless Lan Mini Pocket Router, so what's the difference between TL-WA850RE WiFi Range Extender?I know the maxium speed support is different, but.... what else ?
View 1 Replies
View Related
