Cisco Wireless :: WAP4410N Settings To Use As Range Extender

Sep 18, 2010

I have a simple wireless network that works fine, except for one room where the signal is too low. So I purchased a WAP4410N to use as a range extender.  provide the exact settings that are need to set this up?  I have tried many, many different configurations, and I can't get it to work properly.  In particular, it will not give me an IP address and therefore won't connect.  Also, is it important to use the SAME SSID name?  or better to use a different name so as not to confuse the two signals (base unit vs repeater (4410)). 

View 1 Replies


ADVERTISEMENT

Using A Wireless Router As A Range Extender?

Jun 16, 2012

I started out with a wireless router/modem that my ISP provides as its default modem. It was and still is working fine. We will call this router A. My uncle who is living with me wasn't receiving the wifi signal in his room so he went and bought a different router that is supposed to have more range. Also, I believe it is capable of providing higher speeds wirelessly, but that is really irrelevant I think. We can call this new router B. I currently have router B running through router A with an ethernet cable into a LAN port- LAN port to LAN port. I basically want B to be a wireless range extender.My question is quite simple actually. I have everything up and running just fine, but it seems as if the wireless signal may still be coming from the old router A.

View 5 Replies View Related

Wireless :: Belkin / How To Install Range Extender

Mar 8, 2013

I just bought belkin range extender and I can't get it connected to my network because the 192. page won't open?

View 1 Replies View Related

Belkin Dual Wireless Range Extender?

Nov 6, 2012

i purchased the belkin i described in the title of this post. It instructs me after connecting it to my pc that i should go to web page "[URL] it comes up that there is no site for this address. I can't use this extender until i visit the web to set it up.

View 2 Replies View Related

Can Use Netgear WGR 614 As Range Extender Of Another Wireless Router

Jun 14, 2012

Can I use netgear WGR 614 as range extender of another wireless router?I already using a model with wireless router, i have a spare netgear WGR 614. I want this router to pick up wireless signal from the first wireless router then share the internet on ethernet port only.

View 4 Replies View Related

Setting Up Wireless Range Extender For Sony Bravia TV?

May 7, 2011

On instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.

View 4 Replies View Related

Wireless :: Zyxel WRE2205 Range Extender Not Installing?

Nov 24, 2012

The BT Infinity Hub (fibre optics to the cabinet one) plugs into a router and I tried connecting via ethernet cable to both without result, still no set up page from [URL] either with wi-fi off or with wi-fi on in the "Currently connected to:" window.

View 1 Replies View Related

Wifi Range Extender Versus Wireless Router?

Aug 16, 2011

I have a wireless modem but its a sucky one. It was one of those free ones from verizon. Anyways, I don't get good signal in certain places in my house, so i am interested in knowing which would be better a wifi range extender or a good wireless modem.

View 1 Replies View Related

Linksys Wireless Router :: Using Old WRT54GS As A Range Extender?

May 1, 2012

I first want to say I "think" I might be posting in the wrong forums for this question, but because I'm not really sure what the proper terminology for this is, I thought it best to ask here.
 
I have recently upgraded my router for my home network from an old Linksys WRT54GS G router, to a new E2500 N router.  I have heard/read that it is possible to reconfiqure my old router to act as a range extender for my network but I am unclear how to do so.  I think this may be the same thing as an access point, but all the FAQ's I've found seem to have this work as a solo device, not as a device on existing network.  I have my e2500 setup with the modem in my study and broadcasting from there, and would like to use my old G router set up as a range extender to be located in the front living room area and picking up the network signal and rebroadcasting from there without a modem or computer attached. 

View 1 Replies View Related

Linksys Wireless Router :: Range Extender For WRT120N?

Dec 26, 2012

I have a WRT120N that doesn't provide a great signal in one corner of my house.  I wanted to setup a Range Extender to allow it to reach that area better.  I have tried looking around on here but am not having any luck finding one that says it will be compatible or how to set it up. 

View 5 Replies View Related

D-Link DIR-655 :: Wireless Range Extender Or Repeater / Booster

Nov 20, 2011

I am moving my office from one side of the house to the other which has real spotty wireless coverage. Most likely I will not be able to move the modem or wireless router, so I have to somehow increase the range.I did some research and poking around on forums, but I can't find a clear cut, number 1. What you think would be the best option to pair with the DIR-655.

View 1 Replies View Related

Netgear WN2000RPT Wireless Network Range Extender?

Aug 9, 2011

I recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.

View 2 Replies View Related

Belkin Routers :: N600DB As Wireless Range Extender?

Jan 29, 2013

Can I set up n600 db F9K1102v1 as wifi range extender with no rj45 cable?

Dont have cable infrastructure in section of building where i need net access.

Have a Cable/Modem (wireless) as main router and need to extend the signal using the N600DB - but without cat5 cable between modem/router & N600.

View 3 Replies View Related

Auto-switching Clients Between Router And Wireless Range Extender

Aug 20, 2011

I'm a bit confused about what a wireless range extender gives me. I have bought a Sitecom Wireless Range Extender 300N. This extends the wireless range of your router to parts of the house that have a weak signal or none atall.

It is setup correctly and is working fine, however, the SSID is different from the Router.

Essentially, I want to extend the range of my router to parts of the house that have a low signal. This range extender seems to be the correct product to do this. However, I want my clients to switch to the appropriate wireless access point (either the range extender or my router) depending on the strongest signal, how can this be configured?

When a client is the overlap area (the area where both the router and the range extender can be sensed) I want the client to switch to the strongest signal.

In my case My Router is in the loft and the range extender downstairs. You can still get a low signal from the router when you are downstairs but the range extender give a full signal. However, I dont understand what makes a laptop 'switch' from router to extender when its downstairs.

Because the extender has a different SSID a laptop that can still get a low signal from the router when downstairs doesn't automatically attach to the extender to get a strongest signal.

If I set the extender to have the same SSID as the router

View 1 Replies View Related

Linksys Wireless Router :: Using DIR-600 As Repeater Or WLAN Range Extender?

Oct 11, 2012

Can I use the WIRELESS 150 ROUTER DIR-600 as repeater or WLAN range extender?

View 1 Replies View Related

Linksys Wireless Router :: Configure E2500 As A Range Extender?

Feb 1, 2013

My main router is connected to the modem and is an E4500 (upstairs on one end of house). It has a wired connection to the E2500 (downstairs on the other end of the house). I want the same SSID transmitted from both routers.
 
How do I configure the E2500 to transmit the same SSID as the E4500 to I ahve a consistant signal over the whole house?

View 2 Replies View Related

Linksys Wireless Router :: E4200 Range Extender Options?

Apr 10, 2012

I'm using the e4200 in a big old house with lots of walls, including rooms separated with brick.   Wiring access points would be difficult given the problem of pulling wires.  I do have lots of kids and devices connected including DirecTv, iphones, ipads, laptops, and PS3. Is there a range extender? Do I care if an extender only supports 2.4Mhz if I use the same SSID anyway?

View 5 Replies View Related

Linksys Wireless Router :: Utilize E1500 As Range Extender For EA4500?

Aug 26, 2012

I recently upgraded from E1500 to EA4500.Can I utilize my E1500 as a wireless range extender for the EA4500?I would like to setup my E1500 in my back bedroom to repeat the signal of the EA4500 in my living room.Can this be done wirelessly without connecting an ethernet cable between the two routers?

View 2 Replies View Related

Linksys Wireless Router :: WRT320N - Slow Transfer Through Range Extender

Aug 26, 2011

I have 8mbs down/1 mbs up service through a cable modem (WOW).  We've been using a WRT320N wireless router with great success.  I haven't checked true transfer rates, but when I do a speed test (url...), I pretty consistently get the speeds we are paying for.  There's a room I wanted to use as an office but the signal didn't reach there.  I just set up a WRE54G range expander.  It is talking to the router and my compter.  I have internet access but the speeds are considerably slower (<1mbs down/<0.4 mbs up) than what I get on the other computer that's talking directly to the router.  I've looked for specs on data rates on the WRE54G and can't find them, but I can't image they're that slow.  Can this be because I'm using a G expander with an N router?

View 1 Replies View Related

Linksys Wireless Router :: N300 - Turning Off N Range Extender At Night?

Oct 2, 2012

I want to save energy. How can I turn off the Linksys N300 range extender at  night. Can just unplug or will this screw things up.Is there a button

View 1 Replies View Related

Cisco Wireless :: WAP4410N Not Saving Settings

Sep 5, 2012

I just recieved a WAP4410N and managed to log in to the web interface. It is not allowing me to change many settings. I try to change the wireless network mode and click on save and it goes back to disabled again.
 
P.S. I have just upgraded the firmware to 2.0.3.3 and tried to set it back to the factory defaults. neither worked.

View 1 Replies View Related

Cisco Wireless :: Bridge Settings For WAP4410N?

Sep 20, 2011

send me wireless bridge settings for WAP 4410N.
 
I have purchased two sets of WAP4410N and i need this to connect as wireless bridge to use our external office users(1 or Max 2) which is just beside our office building to surf our internet and retrieve data from our main server.

View 10 Replies View Related

Wireless :: Zyxel WRE2205 Range Extender Loses Connection To Android Phone?

Dec 13, 2012

My samsung galaxy phone with android os connects to the weak signal of the far away router in stead of connecting til to range extender close by.Signal from extender is strong but the phone seems to have problems in obtaining the IP addres from the extender.Have returned to factory settings and made new setup - but still the same problem, and only with connecting tilthe Xyzel range extender 2205?

View 5 Replies View Related

Tp-link 150mbps Wireless :: Wr700n Difference Between Wifi Range Extender And Repeater

Apr 9, 2013

Region : Singapore
Model : TL-WR700N
Hardware Version : V1
Firmware Version :

Since i know there's a "Repeater Operation Mode" in TL-WR700N Wireless Lan Mini Pocket Router, so what's the difference between TL-WA850RE WiFi Range Extender?I know the maxium speed support is different, but.... what else ?

View 1 Replies View Related

Belkin Routers :: Can Connect Wireless Range Extender N300 To N600 For Better Coverage

Oct 21, 2012

I have decided to buy belkin n600 router. my question is can i connect Belkin wireless range extender n300 to belkin n 600 for beater coverage. is this possible ? if possible how many extender i can connect to the router and also can i connect extender with wire and wireless.

View 12 Replies View Related

Cisco Wireless :: WAP4410N Bridge Settings / Best Performance?

Jul 12, 2011

I ordered a pair of WAP4410N to use as a bridge for a split office. So far they have worked without a hitch but the throughput is less than stellar and I was wondering what the recommended configuration was for best performance (and how much speed could be expected in general) out of these two? [code]

The two nodes are separated by about 25 yards across a parking lot with direct LoS to the other, placed inside a window mounted on the wall -elevated at about 10' so cars in the lot outside do not block visibility. At best the throughput I've seen is 1megabyte/sec, and that seems very slow/clunky to me for the 802.11n specification. Am I missing some setting, updated firmware, or physical setup (AC power instead of PoE for better antenna output maybe?) to have such limited performance?

View 7 Replies View Related

Cisco Wireless :: Wap4410n Losing Connection Settings?

Sep 7, 2011

We've had this AP for just over a year and just recently it started  dropping its wireless connection. To fix, I have to and unplug the power and then plug it back in.. Then it works again for a few hours and drops out again. If I navigate to the config page right after it drops, all of the settings seem to be completely gone. But if I go through and unplug/plug it in again, all of the settings are back.
 
I updated the firmware to 2.0.4.2, but that didn't seem to resolve the problem. Is this thing a brick now?

View 7 Replies View Related

Belkin Routers :: Dual-Band Wireless Range Extender F9K1106 With AirPort Extreme?

Jan 12, 2013

Does the Dual-Band Wireless Range Extender #F9K1106 work with the Apple AirPort Extreme Base Station?

View 1 Replies View Related

Wireless :: Netgear WN3000RP Wireless Range Extender Security Setting?

Jan 2, 2012

I have just purchased a Netgear WN3000RP wireless extender.The security setting on all devices on the existing network show as WPA2-PSK wireless n but the extender comes up as WPA-PSK wireless g although the instructions say it will copy existing security settings.There is supposed to be a Netgear website to log on to an installation wizard but this doesn't work and appears not to have worked for some months.Why are Netgear still selling this device without an installation disc when they must know by now that their site doesn't work?Is there any way to alter the security setting of the extender?

View 10 Replies View Related

Possible To Use 625 As A Range Extender?

Mar 11, 2012

Can I use a 625 as a range extender? And if I can how do I do it?

View 3 Replies View Related

Cisco Wireless :: WAP4410N-G5 - All Settings Lost After Enable / Disable

Oct 3, 2011

I received WAP4410N-G5 AP with 2.0.2.1 firmware and set up it very easily. Never experienced a single signal drop in a few days.
 
After updating firmware to 2.0.4.2 version I am completly unable to make any changes! If I press on "Enable" or "Disable" all settings will be lost after I apply them and neither "Enabled" nor "Disabled" is selected.
 
Had to revert back to 2.0.2.1. Is my AP faulty?

View 4 Replies View Related

Cisco Wireless :: WAP4410N Does Not Exceed 130Mbps In N Mode At Close Range

Sep 25, 2011

I have a WAP4410N which I have had for awhile and the performance was flawless at what appeaared to be 300 Mbps.  I udated the firmware recently to 2.0.4.2.  This is when the problems started.  Within 15 feet of the acccess point it would drop the connection and speeds were under 65 Mbps.  I factory defaulted the unit and reinstalled the firmware with no changes.  I run several other access points of differnt manufacturers and I get fantastic performance on draft N and G. I did check all the laptops for network adapter incosistansies. Have I made a configuation mistake?  I only changed the IP address to bring it into the range of other devices.  I use a sa520 router and a Trendnet Gigabit switch and a server with MS SBS 2008 which works well with all but the WAP4410N. 

View 2 Replies View Related

Router As A Range Extender?

Sep 12, 2012

Little info on my setup as is: Comcast ISP Internet Modem with the wireless gateway built in. I live in a faily large house and am out in my garage a lot where the signal is sub-par, id also like to have internet out in my yard without it sucking.

I have an extra linksys wrt45g sitting in my garage...could I use that someway to extend the range of my wifi? The signal from my main gateway is wireless N.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved