My Wireless Not Able To Get Past Ping
Nov 12, 2011while trying to hookup wireless cant det past gateway ping on test. Iv'e used addresses given to me by net gear.
View 5 Replies
ADVERTISEMENT
Cisco 2691 - Can't Ping Past Gateway
Oct 24, 2012I've spent the last two days working on this problem and it is killing me! I know the answer has to be something simple, but despite hours of searching and trying different things, I just can't seem to fix it.Essentially, I am going to be installing a Cisco 2691 and use it as the default gateway for a small business. It will be directly connected to a cable modem with a static IP. The other Ethernet interface is going to connect to a 2950 switch with a couple different VLANs.
The problem I'm having is that I can ping anything external from the router itself. From the clients connected to the 2950, I can ping IPs in other VLANs, and I can ping up to the IP of the external interface, but no pings go beyond that.I've set up NAT overload on the router, and when I do a debug ip nat, I see the pings trying to get through with the proper translations, but I still don't receive ICMP replies back.I set up GNS3 to simulate what I'm trying to accomplish (since it emulates a 2691). Attached is a jpg of the topology -- on the right is the "simulated ISP" with 3 loopback networks and one host on a different subnet. The 2691 has a static route to the "Internet" router, and can ping everything attached to the router, including the host. The host (5.5.5.5) can also ping the outside interface of the 2691 (50.50.50.2).
However, the hosts behind the 2691 can't ping past 50.50.50.2. The 192.168.0.x network can be ignored, because that network won't need to access the Internet. But the 10.10.20.x (VLAN 20) and 10.10.30.x (VLAN 30) networks will need to. In the simulation, the hosts are 10.10.20.5 and 30.5. They can ping each other, their default gateways, and the 2691 outside interface (50.50.50.2) but not the other side, the "Internet" router at 50.50.50.1 or beyond.
[code]....
Cisco VPN :: ASA 5510 / Cannot Ping Or Access Anything On The LAN Past The Firewall
Jan 9, 2012The VPN will connect.I can ping and connect to the ASA 5510 on it's LAN interface.My problem is that I cannot ping or access anything on the LAN past the firewall. What am I doing wrong?
Here is my config.Result of the command: "show config"
Saved
: Written by enable_15 at 22:55:02.299 UTC Tue Jan 10 2012
!
ASA Version 8.2(5)
!
hostname ********
[code]....
Cisco WAN :: 2610 / Windows 7 Can't Ping Past Local Interface
Jul 18, 2012Ive got my home lab setup with two 2610 routers hooked togeather with a DTE/DCE Crossover and I have OSPF configured on both routers. Each router has one 3550 switch connected to each FA0/0 inteface. The issue is that Everything can be pinged except my windows 7 PC connected to the R1 LAN. Everything else can be pinged from any other device. I checked the PC gateway configuration, disabled the firewall and checked my switch configuration! Is their something that I need to change in Windows?
Windows PC ------------ 3550 Switch-------------R1-----------------------------------R2---------------------3550 Switch----------------------Linux Box
Windows PC can't ping past the FA0/0 interface between the switch and R1
Wireless :: Netgear Wn2000rpt Cannot Get Past Passphrase
Jun 19, 2011I have a new Netgear WN2000rpt extender and cannot get past passphrase on the install wizard...nothing happens after I enter my passphrase and select "continue"..
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N V2 - Setup Cd Won't Get Past 25%
Jul 26, 2012setup cd won't get past 25% and says not connected to the int! but yes i am .Also tryin to bridge with ATT PACE 4100n crapp!
View 2 Replies View RelatedCisco Wireless :: 5508 - WLC Not Pass DHCP Past Bridged Units
Jun 26, 2012I have a WLC 5508 with LWAP 1242 with wireless bridges connected to the APs I cannot get DHCP to pass through the bridge to the PC connected to the bridge.
View 5 Replies View RelatedHow To Get Past Router Firewall
Feb 9, 2011I need to get past a Cisco firewall my roomate set up on our internet. I have zero access to the internet, and cannot access a website like Vtunnel to get around it.
View 2 Replies View RelatedCannot Get Past Password / Way To Bypass Security
Aug 3, 2012Im stuck working on a moderm, its a speed touch 536 (old school) i cannot get past a password.. Im trying to set this bad girl up with a router, setting up routers in my specialty.Im trying to bridge the modern but on the setup page there is a password, i dont know if its factory or what.. ive tried many of common passwords for networking like (admin/admin, Admin/ Admin, Admin/Password) ive tried everything i can think of. so i need a way to bypass the security. Flashing the software maybe?Ive found a software uploader for it, but i cant find the original firmware for the modern.
View 3 Replies View RelatedHow To Check Past Facebook Login
Oct 6, 2012I recently had my facebook hacked,how can i get the last few ip address.
View 1 Replies View RelatedCabling / Cards :: Cat5 Not Working Past 25Ft
May 22, 2012We are setting up a network in our new house. We have the internet entering the garage. From there we have a 60 ft Cat 5 cables run through the crawl space. Orginally we had the wireless router attached to the end of the cat 5 and then attached to the computer. We could not get a connection through this wire. We then took out the cable, and ran a new one, same issue. We took the same cable, cut it down to 25 feet, installed the router in the garage and we have an excellant connection. We then ran a new wire through the crawl space from the router. Same issue, no connectivity. Taking that cable out, cutting it down we ran the wires from the router to our computers in the garage. why a Cat5 cable would not work at 60Ft.?
View 6 Replies View RelatedNot Able To Share Files With Computers Past My Client Bridge?
Aug 5, 2012I am not able to share files with computers past my Client Bridge. I can see one computer past the bridge in my network and two more can see but all have internet, but still can not access ant to get to their shared folders. Do not know if operating systems would made a difference, I main computer run Windows 7 Pro 64 bit. all the rest run XP Home. Have two computers before the bridge no problem there.
View 2 Replies View RelatedCisco Switching/Routing :: 3850 System LED Blinking Fast - Not Getting Past POST?
May 14, 2013I pulled a brand new Cisco 3850 Switch out of the box yesterday. Following the Quick Start Guide, I put in the power module, powered it on, and waited for it to complete POST. Then, I plugged in an Ethernet cable between a laptop and the switch on a port in the front, and went to the web interface at https://10.0.0.1. I got to the Express Setup, and attempted to change the IP address of the switch to an IP on my LAN, along with other options. When clicking submit, it didn't appear to take. Upon refreshing in the Express Setup, the IP config was blank, so I once again configured it. This time clicking submit brought up a message that it was changing the IP address. I waited for it to finish, and when it looked done, I powered the switch off and took it to a different room to hook it up to the LAN for further configuration.
When plugging in the power at that point, the switch starts through the normal light process (System LED blinks green slowly), and then eventually the System LED blinks green very fast and never stops. It doesn't get to the point of having the system loaded and ready to log into. There's no amber lights, just the System LED flashing green fast. On the back, the Power module and all bay lights are green, and the Console light is green, but the Management port light is off.
I've tried using the reset button on the back of the switch two different times to reset it to default configuration, thinking I hosed it somehow, but it never goes past the fast blinking System LED.
Cisco Switching/Routing :: 3560G Can Ping Devices In Enterprise LAN But Cannot Ping Interface
Mar 31, 2012I have a new 3560G to set up a small network for a remote site. I configured the vlan and an SVI as the gateway. The switch is also the DHCP server for the LAN. I configured Gi0/2 as L3 port, connecting to the nearest neighbor. My network runs EIGRP so i advertised the routes into the EIGRP process. The switch forms EIGRP neighbors and learns all routes in the enterprise network. The problems I'm having now are: 1. The switch learns all routes in my enterprise LAN and can ping devices in the enterprise LAN, but I can’t ping any interface on the switch from the enterprise LAN. 2.
View 5 Replies View RelatedCisco Switching/Routing :: Can Ping From R1 To R3 SVI4 Gateway But Cannot Ping Host
Dec 12, 2011I set this up and I can ping all the gateways but never the hosts. I was hoping I could make these links between 6500's a mix of L2 and L3. Check it out. They are connected in a linear fashion R1--->R2--->R3. I can ping from R1 to R3's SVI4 gateway but I can never ping a host on that SVI4. I was hoping that I could use the port-channels between 6500's as routed links or as trunk links depending on the type of traffic....thought it would ease the migration. I suppose I could always get rid of the port-channels and just make separate L2 and L3 links between the 6500's.
View 3 Replies View RelatedCisco Switching/Routing :: 4.2.2 Unable To Ping 1 Internet Site From Edge Router Able To Ping
Jan 18, 2013From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies View RelatedRouters / Switches :: Windows Ping Success But Mac Ping Fails
Aug 15, 2011When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
Can Ping From Server But Can't Ping To Work Stations
Jan 26, 2012I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies View RelatedCan't Ping XBox 360 But Can Ping Other Devices
Mar 1, 2013I had both a Westell 7500 and a Linksys Router working fine and had my 360 setup as an extender for Windows Media Center so I could stream TV, Music, Movies, etc from my desktop to the 360. Then I switched my modem/router out with a Zyxel PH5001Z
So now today I noticed that I can no longer find my desktop through the XBox. I have adjusted my firewall settings on the modem itself, even completely disabling it. UPnP is enabled for the 360 and the device is showing under my device table. At first I wasn't able to ping any network devices but after creating an ICMPv4 Firewall rule it worked fine. I've confirmed the XBox IP Address through Network Map, the Device Table on the modem and through Network Settings on the XBox. I've diabled my modem firewall as well as Windows Firewall, completely and I still can't ping my XBox or set it up as an Extender.
I have the XBox connected wirelessly using WPA2-Personal and it's operating in 802.11g/n mode.
Wireless :: Cannot Ping DNS Server On PC
Jan 6, 2011Able to establish wireless connection to broadband router but cannot browse internet as it seems unable to resolve site names.Unable to ping DNS server from the pc, get request timed out message
View 9 Replies View RelatedWireless :: How To Low Ping Rate
Jul 22, 2011having high ping how to low the rate of ping.
View 1 Replies View RelatedWireless Has Ip Address But Won't Ping Anything
Aug 31, 2011I have a HP Pavilion DV6000 that I just tried connecting to my network through wireless. It says connected, pulls an IP adress, and gets the gateway but it will not pull up web pages, ping google, or ping any other computers on the network.. I have one other computer connected to the network, wired. It can connect fine to webpages, but it wont ping the HP laptop. The router interface shows that it's giving the HP an IP but thats all it seems to be doing..
View 2 Replies View RelatedCisco VPN :: ASA5510 Can't Ping VPN Clients But Clients Can Ping
Feb 29, 2012I have a strange issue on my ASA 5510 (8.4). I can't ping or connect to the VPN clients but the VPN clients can ping/connect to any inside resources. I have checked all the NAT extemtion entries.
View 3 Replies View RelatedCisco Wireless :: 2500 / Wireless Guest Users Cannot Ping If ACL Is Applied
Sep 16, 2012This is the first time I am trying my hands on wireless gears. I have 2500 WLC and 1142 AP (which I converted from Standalone to LAP).I have a layer 3 POE switch where i am using port 1 for the WLC which is a trunk port.
Port 2 is for the AP using access vlan 111
Port 3 is trunk port going to a router where i am running dhcp server for the VLANs which are as follow:
VLAN 110 -Corp Wireless (10.1.110.0/24)
VLAN 111 - AP-Mgmt (10.1.111.0/24)
VLAN 999 - Guest (10.1.101.0/24)
I wanted to block the traffic from the Guest VLAN 999 but when i apply the ACL on the Guest Interface created on the WLC, I dont see any pings going across and neither I see any hit counts on the deny statement as if the ACL is never applied.
Wireless :: Can't Surf The Internet But Can Ping
Apr 10, 2012I can be connected to the internet (i.e. surfing, emailing) and suddenly loose my connection. I can then ping sites but not be able to access via IE or Firefox. I am running Windows 7 Home Premium and Norton. I have had the problem on multiple networks. I have DSL at home and connect wireless to the network. When this occurs my wired machines still work fine.
View 3 Replies View RelatedWireless :: Internet IP Ping Failed
Oct 13, 2011Couldn't get online and I found this message "internet IP ping failed" when I did a diagnostics on the wireless card.
View 1 Replies View RelatedCan't Ping External IP With MiFi Wireless
Mar 12, 2011I have spent two days on the phone with virgin mobile broadband where I bought the device and they do not know what I am talking about.First of all the mifi is working fine on the one and only computer I have set up so for..it is Vista operating system..I am trying to set up my vista computer as an FTP server on the mifi or wifi or whatever you call it.when I disable the DHCP service on this virgin mobile mifi device so that I can generate my own internal ip for this particular computer..It is not functioning that is I cannot connect to the internet..I tried to get from Virginmobile the DNS server address but they were confused...When I log into the device itself under advanced options it does allow for me to disable DHCP..but my problem is what IP do I use when setting up the wireless connections, I disengaged the automatic, but I am having a heck of a time trying to use the right IP then the gateway address and the DNS.
View 14 Replies View RelatedWireless Can Ping But Not Browse Windows 8
Nov 27, 2012New windows 8 laptop, wired connectivity works fine, wireless connects but can't browse. Can ping ip addresses and websites dns but cannot browse.
View 5 Replies View RelatedCisco Wireless :: AP 1602E Can't Ping Outside
Apr 17, 2013Client PC attached AP can ping outside anywhere. but, AP can't accept ping from outside. of cource there is no Firewall. It just router on a stick topology. I was surprised that phenomenon. How is this occur? AP has filtering feature?
View 3 Replies View RelatedWireless :: Can Ping Computers But Can't See Shared Folders?
Jul 24, 2011I have two work laptops connected wireless on my home network. I can see the computers and ping them but i can't see shared folders. These work fine at work. On wireless i am set for obtain address from router DHCP (linksys E3200). Both are on the same ip range. Both are on Win XP pro. I have Everyone in all share permissions and also in the security tab. Both machines when at work are on the same domain but one is a local user on the domain. Simple file share is not selected.
View 1 Replies View RelatedWireless :: BD C6500 Samsung Gateway Ping Comes
Jan 29, 2011I have a wireless system and I am setting up the player but cannot connect because of the gateway ping problem.I called my server and was told that my average ping rate is 1292 and have no hope of getting connected.
View 7 Replies View RelatedWireless Very Slow Loading - High Ping
Mar 7, 2012My wireless connection says i have full bars of signal. When I do a speed test, i get 500-600 kb/s download. Which is what I used to get. However, after I re-installed my wireless adapter's card, the wna3100 netgear, it became extremely slow.
Pages would load slow, I could no longer play League of Legends properly because the ping is too high. Also, I used to have crossfire graphics cards running and the internet was fine, but after reinstallation, I thought I'd turn it off because that's how I fixed it before. But now, even with just one graphics card running, the internet is extremely slow.
[code]...
Wireless :: How To Create BAT File To Test Ping
Sep 22, 2011how to create a .bat file to test ping with nane and ip address
View 1 Replies View Related