Wireless Can Ping But Not Browse Windows 8
Nov 27, 2012New windows 8 laptop, wired connectivity works fine, wireless connects but can't browse. Can ping ip addresses and websites dns but cannot browse.
View 5 RepliesNew windows 8 laptop, wired connectivity works fine, wireless connects but can't browse. Can ping ip addresses and websites dns but cannot browse.
View 5 Replies3 different browsers fail to see the internet. can ping all domains.
View 1 Replies View RelatedI have Aironet 1240AG and the 2 laptops connected to same SSID. Unable to can ping each other but can ping/browse server on wired.
Below are my config:
Current configuration : 2646 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname AP2!enable secret 5 $1$7EVQ$2FN7ewjcrwKCICIfmFgCO.!no
[Code].....
We've got about 15pcs at work, all on one network. All connect to one switch, and the router connects to the switch so all has internet access. Four pcs has got windows vista on, the rest XP. Yesterday I tuned on the one pc with Vista on, but could not connect to a mapped drive. I checked in the network places, i could see only three pcs, all three xp pcs. I can browse the internet, but not the pcs on my local network, and I can ping the pcs on the network.
View 1 Replies View RelatedI have a very strange problem affecting my LAN. New entrants to the network can ping successfuly but cannot browse. Rest of the pcs that have been on the network before are browsing quite fine. Even when I connect new PC directly to the router LAN ports, problem still persists. I've tried four different new laptops so far. I've even intalled a new router to no avail.
View 19 Replies View RelatedI can ping all the devices on my network but cannot browse any pc/server, mapped drives now disconnected. I can access the laptop from another machine and can browse the internet from the laptop. It has windows 7 ultimate. I have tried everything from forums, sfc/ scannow, flushdns, all services started.
View 12 Replies View RelatedI've been stuck with a connection problem on my desktop for 6 months and nothing I do can fix it. My computer technician friends can't fix it either, so here's my last gasp attempt to get it online before I throw the machine out of the window.I'm using XP, don't recall ever having downloaded any Service Packs, and am trying to connect wirelessly to my home network here in France. Laptops and iPhones connect no problem. I don't think it's the wireless network card (which I bought nearly 5 years ago) as I had the same connection problem in my last apartment, with the same internet provider. I eventually borrowed an ethernet cable and managed to get it working wirelessly, but I have no idea how I did it.
The computer connects to the wireless network but I can't browse or ping. I've flushed dns, tried to input the ip manually, checked and unchecked LAN settings, checked and unchecked Internet Protocol TCP/IP, i've tried winsock, I've done the netsh reset and NOTHING worksI've checked the security settings, password and encryption a hundred times, I've disabled the firewall and today I've pulled out the recovery disks It didn't.Interestingly, the desktop has suddenly decided to go online once or twice (after I'd disabled Norton) but as soon as I shut down, I'm back to square one
two of my workstation can not receive ip address from the server but can ping server. So i can not browse with them
View 3 Replies View RelatedI just installed a new ASA 5505 for an office with three internal subnets.* The three networks can each get online fine and ping eachother, but cannot browse to shares on the two internal networks other than their own.* How do I configure the ASA to allow all traffic between these three inside networks?
192.168.152.0
192.168.152.0
192.168.154.0
[code]....
Router connects to ISP but cannot browse the Internet. I have updated the firmware to 2.0.3.2 and that did not work. Reset the router to factory settings and that did not work either. Router had worked until the ISP changed the ONT. The router worked initally after the ONT was changed, but that changed sometime during the day as it did not work that night. The ISP gave me a netgear router and that works, so I can connect, but I would rather the RVS4000 would work. I assume a setting at the ISP, but do not know which one. I get an error on the computer "name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded" I can ping, tracert and my little weather gadget works, but a web page will not display
View 7 Replies View RelatedI have the above mentioned switch. I assisgned an IP address to the switch some time ago, but never had cause to use it (as it was purhcased as a spare).The problem I have now is that I cannot ping the device or browse to it via IE. Using hyperterminal and the CLI i have attempted to assign the same IP address, but i get a warning along the line of already assigned.I have set IP's to other 3COM model switches without problems. why I cannot ping this device or assist in connecting to it via IE?
View 6 Replies View RelatedI cant browse my NAS through Network view in Win 7.
I can Ping it and can connect network shares by using it's IP address but it wont appear in my Network as an Icon. My wifes win 7 laptop does see the NAS in her network. I can also see my wifes laptop in the network view. So it must be my laptop.
It must be that my laptop is not resolving the name properly for some reason.
when i brows the internet it says " no data received" and i tried this to every browser i have and still no connection it happened first time hours ago i tried shutting it down and restarting it but its still not working my os is windows 7 home premium. i don't know what i did and my friends don't know how to fix it. we have 3 laptops, 2 other laptops doesnt have a problem.
View 2 Replies View RelatedWe have two offices separated by a WAN.Office A is our main office that has all of our servers, including domain controllers and active directory, on our own network.Office B is a temp. office that is piggybacking off of our sister company's network, but the computers there still connect back to Office A servers to login/access services. However, Office B connects to the sister company's local domain controllers for DNS/WINS.We're having an issue where NetBIOS names of the other office are not always showing up when browsing for computers within the WinXP Windows Explorer (My Network Places --> Entire Network --> MS Windows Network --> domain A). It seems entirely random whether or not we can see the other office's computers. We can still ping/remote to them, but cannot browse to them.
It would normally be a non-issue, but some of our software apps require us to "Browse" to the network server location, rather than being able to type in the address, during installation. Can't install if we can't browse the Office A servers. Obviously has something to do with WINS not always populating/updating, but I'm not sure what or how to fix this.
Computer is Win 7, SP1 fully updated.I can browse to most other web site, but cannot go to Google or YouTube - Broadcast Yourself.
Tried a bunch of stuff like flushdns, winsock fix, clearing cache. Nothing works.Cannot ping to Google either.Gives in ip address but times out.Even when typing in the google ip that returns from the ping cmd it will not go to the web site.
When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
just replaced a WRT54G with E4200. Most functions work well. 4 wireless computers (1 Macbook, 3 Win 7), 1 wireless android, 1 wired Win7 computer, 1 ethernet connected hard drive, 1 ethernet connected printer. All computers can ping router, access hard drive, access internet, ping android and ping Macbook.However, router, nor any computer, can't ping Win7 computers. Apparently IP based connections between WinX computers is blocked. My real applications are to Remote Desktop Connect from 1 Win7 computer to another, or to run a DLNA music server on 1 Win7 computer, accessed by another. (the LAN connected computer is the server, accessed by a wLAN client. All worked fine on WRT54G router, but can't connect thru E4200. When these apps failed, I tried PING, and that failed as well.All computer's IP addresses are properly served from E4200 via DHCP, and are visible thru the router's DHCP Reservation panel.
View 1 Replies View RelatedI was looking at a Wireshark capture off my Windows XP box, and I noticed a rather curious behavior. Every 1-2 seconds, the machine sends a ping request to my Linksys WET610N wireless network bridge, which the Windows box connects to the Internet through.
View 1 Replies View RelatedMy Win7 laptop was unable to ping another WinXP within the same network. When I first got this Win7 laptop, I experienced this problem. The WinXP laptop has no problem pinging the Win7 system. A visiting friend changed the setting on the Win7 laptop and suddenly the two laptops were able to talk to each other. I wiped the WinXP laptop a few weeks ago. Since then, the Win7 laptop is again unable to ping the WinXP. I have googled for many hours now. I tried just about all the methods that make sense to me but still cannot ping from Win7 to WinXP. How I can reestablish communication between these 2 systems on the same network?
View 5 Replies View RelatedThis started out as a printer issue and then evolved into a networking issue.let's see if i can include all the details here. the laptop in question is having problems talking to other internal network computers/printers. i am on a 192.168.10.? network, the laptop has a dhcp assigned address, my domain controller/dns/dhcp server has an address of .3, i have a fileserver at .9, my default gateway is .1 the laptop can ping all 3 of those computers.i have a printer with .130 address, the laptop times out when pinging it. there are around 15 or 20 other computers on the network with dhcp assigned addresses.so far i cannot get the laptop to ping any of those.
The same thing happens whether i am connect using the Local Area connection or wireless, so 2 different NICs, same laptop though.the laptop can ping any outside address, the firewall is turned off, the other computers that i cannot ping can ping each other and the printer. here's the real kicker, i noticed while running ping 192.168.10.130 -t when i do a repair on the network connection, the darn thing will ping the 130 address 3 times then start timing out again? is going on? i have killed every weird ass service i can think of, i have booted up in safemode with networking with the same result. i have signed in as a different user, i have looked at the routing, the host file, nothing looks weird to me at all. i have also run the winsock fix for xp......
I bought a usb printer server to connect my usb printer to my router. USB cable to the print server and cat 5 from the print server to the router. The print server has a static fixed ip of 169.254.10.10 and a subnet mask of 255.255.0.0 I can ping the printer server and it works perfect from my windows 7 laptop. When I attempt to set it up on my windows xp (SP3) laptop I am not even able to ping the 169.254.10.10 address. On the windows 7 laptop i can navigate to the print servers menu by placing 169.254.10.10 in the address bar of internet explorer. No so with the xp laptop.What is different about the ip configuration between win xp and win7. how to get the xp laptop to "see" the print server. Want to keep the print server at the default settings if possible.
View 22 Replies View RelatedI m not able to ping from one to another with the os win XP n other with win 7.
View 1 Replies View RelatedHas anyone come across a ping cmd utility for windows with more functionality like the linux one? What I want really is sequence numbering and RTT measured with a few decimals.
View 3 Replies View RelatedMy Dell Inspiron Win 7 equipped computer cannot connect to the Internet. I have a DSL router that I can wirelessly connect to, but it says no Internet access. I used the manual Intel Wireless Manual Diagnostic Tools to test my system and failed the ping test. Dialog box says "no response, default gateway,DHCP server" and indicates the ping test failed.I have checked my router and it is working nominally; other laptops in my family have Internet access just fine. My Intel Centrino Wireless N 1030 adapter is working fine. I detect no other hardware problems on my laptop.
View 7 Replies View RelatedThis is what I have as a setup:BT Home Hub wifi routerPC with Windows 7 Home premium connected via ethernetMacbook Pro with OSX10.6 connected via wifiIt feels like i've tried everything to get this working. As far as I can see the settings are all ok but I've noticed that I can't ping the PC from the mac although I can ping with success the other way around tried traceroute from the macbook and it gives me this so it is able to see it somehow...Code:traceroute to 192.168.1.66 (192.168.1.66), 64 hops max, 52 byte packets 1 alistair-pc.home (192.168.1.66) 1.724 ms * 1.151 msNot sure where to go from here. I think discovering that ping is failing is a good start to diagnose.
View 19 Replies View RelatedI have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
View 5 Replies View RelatedWhen I try to ping ipv6.xsnews.nl on either of my Windows 7 computers, it returns "Ping request could not find host". But when I do it on XP, it succeeds. I have tried putting the W7 PC in the DMZ, disabling the software firewall but it doesn't work.
What I think it involves is having ipv6 installed on each. I tried to duplicate the setup of both the XP and a W7 computer, installing the gogo6 tunnel. But apparently it's not setup on this computer because the ping result is the same as on the third computer which hasn't had ipv6 installed. s not setup on this computer because the ping result is the same as on the third computer which hasn
Why i can't ping client to server using LAN connection. but i can ping server to client. i use windows server 2003 as a server.
View 1 Replies View RelatedI have a HP G60-530US and i use Mozilla Firefox. My computer had froze up and i had to restart it. My wifi is working but it keeps sending me firefox cant find the server at... message. It said that the firewall or proxy could be doing it but i cant find a problem with it. My computer had just updated so i dont know if that could be the issue. My other computer is working just fine so i know its not the router. My computer has done with before but i cant remember how i fix it and if im not mistaken my computer had updated when it happen the last time, but im not 100% sure.
View 3 Replies View RelatedIt says im connected to the internet but I cannot get any websites.I aquired ip address fine my laptop connects,right now im on my lap top.like I said ip address and gateway,says im connected but im using a public network.
View 3 Replies View RelatedI'm trying to connect my laptop to w wifi hotspot. It connects but I can't browse the internet. I've tried turning off firewalls and security but no joy. I'm using chrome and get an error message 105 about being unable to resolve DNS?
View 1 Replies View RelatedWhen using my Windows XP SP2 Laptop and Desktop, it says that I HAVE excellent connection to the wireless internet but I CANNOT browse or download content. When using my Andriod phone I CANNOT connect to the wireless internet. When using my Mac laptop and Iphone I CAN connect to the wireless internet. I HAVE internet connection and I CAN browse the internet when I DIRECTLY connect the modem to the Windows laptop.
View 17 Replies View RelatedUsing the latest Cisco QuickVPN, my Windows 7, 64 bit laptop processes the QuickVPN connection to the point where the laptop attempts to ping the router and verify the connection. Those pings fail.Windows firewall is ON and IPSEC is started on the laptop. I have tried Kaspersky's firewall both enabled and disabled with no change.
View 19 Replies View Related