Windows 7 Unable To Ping Windows XP?
May 20, 2011
My Win7 laptop was unable to ping another WinXP within the same network. When I first got this Win7 laptop, I experienced this problem. The WinXP laptop has no problem pinging the Win7 system. A visiting friend changed the setting on the Win7 laptop and suddenly the two laptops were able to talk to each other. I wiped the WinXP laptop a few weeks ago. Since then, the Win7 laptop is again unable to ping the WinXP. I have googled for many hours now. I tried just about all the methods that make sense to me but still cannot ping from Win7 to WinXP. How I can reestablish communication between these 2 systems on the same network?
View 5 Replies
ADVERTISEMENT
Sep 14, 2012
I m not able to ping from one to another with the os win XP n other with win 7.
View 1 Replies
View Related
Feb 28, 2011
This is what I have as a setup:BT Home Hub wifi routerPC with Windows 7 Home premium connected via ethernetMacbook Pro with OSX10.6 connected via wifiIt feels like i've tried everything to get this working. As far as I can see the settings are all ok but I've noticed that I can't ping the PC from the mac although I can ping with success the other way around tried traceroute from the macbook and it gives me this so it is able to see it somehow...Code:traceroute to 192.168.1.66 (192.168.1.66), 64 hops max, 52 byte packets 1 alistair-pc.home (192.168.1.66) 1.724 ms * 1.151 msNot sure where to go from here. I think discovering that ping is failing is a good start to diagnose.
View 19 Replies
View Related
Nov 26, 2011
I have an RV042 using Quick VPN to connect to a remote network. I have port 1723 forwarded to a static IP address on a Windows 7 Pro 64 bit PC. I can establish the VPN and ping a printer but not the Win 7 PC. I can not acccess any shares on the pc via the IP address. It has Norton Antivirus and Windows Firewall. This remote PC replaced a Windows xp PC that allowed access to the shares. I have tried access with a Windows XP Pro and Windows Vista Home Premium PC. Neither have worked.
View 1 Replies
View Related
Aug 15, 2011
When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
View 1 Replies
View Related
Jan 12, 2011
This started out as a printer issue and then evolved into a networking issue.let's see if i can include all the details here. the laptop in question is having problems talking to other internal network computers/printers. i am on a 192.168.10.? network, the laptop has a dhcp assigned address, my domain controller/dns/dhcp server has an address of .3, i have a fileserver at .9, my default gateway is .1 the laptop can ping all 3 of those computers.i have a printer with .130 address, the laptop times out when pinging it. there are around 15 or 20 other computers on the network with dhcp assigned addresses.so far i cannot get the laptop to ping any of those.
The same thing happens whether i am connect using the Local Area connection or wireless, so 2 different NICs, same laptop though.the laptop can ping any outside address, the firewall is turned off, the other computers that i cannot ping can ping each other and the printer. here's the real kicker, i noticed while running ping 192.168.10.130 -t when i do a repair on the network connection, the darn thing will ping the 130 address 3 times then start timing out again? is going on? i have killed every weird ass service i can think of, i have booted up in safemode with networking with the same result. i have signed in as a different user, i have looked at the routing, the host file, nothing looks weird to me at all. i have also run the winsock fix for xp......
View 5 Replies
View Related
Aug 28, 2012
I bought a usb printer server to connect my usb printer to my router. USB cable to the print server and cat 5 from the print server to the router. The print server has a static fixed ip of 169.254.10.10 and a subnet mask of 255.255.0.0 I can ping the printer server and it works perfect from my windows 7 laptop. When I attempt to set it up on my windows xp (SP3) laptop I am not even able to ping the 169.254.10.10 address. On the windows 7 laptop i can navigate to the print servers menu by placing 169.254.10.10 in the address bar of internet explorer. No so with the xp laptop.What is different about the ip configuration between win xp and win7. how to get the xp laptop to "see" the print server. Want to keep the print server at the default settings if possible.
View 22 Replies
View Related
May 18, 2011
3 different browsers fail to see the internet. can ping all domains.
View 1 Replies
View Related
Oct 12, 2011
Has anyone come across a ping cmd utility for windows with more functionality like the linux one? What I want really is sequence numbering and RTT measured with a few decimals.
View 3 Replies
View Related
Aug 22, 2012
My Dell Inspiron Win 7 equipped computer cannot connect to the Internet. I have a DSL router that I can wirelessly connect to, but it says no Internet access. I used the manual Intel Wireless Manual Diagnostic Tools to test my system and failed the ping test. Dialog box says "no response, default gateway,DHCP server" and indicates the ping test failed.I have checked my router and it is working nominally; other laptops in my family have Internet access just fine. My Intel Centrino Wireless N 1030 adapter is working fine. I detect no other hardware problems on my laptop.
View 7 Replies
View Related
Nov 27, 2012
New windows 8 laptop, wired connectivity works fine, wireless connects but can't browse. Can ping ip addresses and websites dns but cannot browse.
View 5 Replies
View Related
Jul 11, 2011
I have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
View 5 Replies
View Related
Apr 27, 2011
When I try to ping ipv6.xsnews.nl on either of my Windows 7 computers, it returns "Ping request could not find host". But when I do it on XP, it succeeds. I have tried putting the W7 PC in the DMZ, disabling the software firewall but it doesn't work.
What I think it involves is having ipv6 installed on each. I tried to duplicate the setup of both the XP and a W7 computer, installing the gogo6 tunnel. But apparently it's not setup on this computer because the ping result is the same as on the third computer which hasn't had ipv6 installed. s not setup on this computer because the ping result is the same as on the third computer which hasn
View 3 Replies
View Related
Nov 20, 2011
Why i can't ping client to server using LAN connection. but i can ping server to client. i use windows server 2003 as a server.
View 1 Replies
View Related
Dec 17, 2011
Using the latest Cisco QuickVPN, my Windows 7, 64 bit laptop processes the QuickVPN connection to the point where the laptop attempts to ping the router and verify the connection. Those pings fail.Windows firewall is ON and IPSEC is started on the laptop. I have tried Kaspersky's firewall both enabled and disabled with no change.
View 19 Replies
View Related
Jul 18, 2012
Ive got my home lab setup with two 2610 routers hooked togeather with a DTE/DCE Crossover and I have OSPF configured on both routers. Each router has one 3550 switch connected to each FA0/0 inteface. The issue is that Everything can be pinged except my windows 7 PC connected to the R1 LAN. Everything else can be pinged from any other device. I checked the PC gateway configuration, disabled the firewall and checked my switch configuration! Is their something that I need to change in Windows?
Windows PC ------------ 3550 Switch-------------R1-----------------------------------R2---------------------3550 Switch----------------------Linux Box
Windows PC can't ping past the FA0/0 interface between the switch and R1
View 7 Replies
View Related
Mar 18, 2012
just replaced a WRT54G with E4200. Most functions work well. 4 wireless computers (1 Macbook, 3 Win 7), 1 wireless android, 1 wired Win7 computer, 1 ethernet connected hard drive, 1 ethernet connected printer. All computers can ping router, access hard drive, access internet, ping android and ping Macbook.However, router, nor any computer, can't ping Win7 computers. Apparently IP based connections between WinX computers is blocked. My real applications are to Remote Desktop Connect from 1 Win7 computer to another, or to run a DLNA music server on 1 Win7 computer, accessed by another. (the LAN connected computer is the server, accessed by a wLAN client. All worked fine on WRT54G router, but can't connect thru E4200. When these apps failed, I tried PING, and that failed as well.All computer's IP addresses are properly served from E4200 via DHCP, and are visible thru the router's DHCP Reservation panel.
View 1 Replies
View Related
Jul 18, 2012
last week I installed a new router (2911) in my network.We had to create two different VLANs for the new setup to work as wanted.I have a Windows 2008 R2 which is a Domain Controller for Active Directory on the ip address 192.168.0.195.That server (HP DL180 G6) has two NICs. One has the above IP address and the other one has 192.168.0.199.
On the other VLAN, I have a server, running the same OS, that I want to re-join, as it formerly was, the AD on the first server (192.168.0.195). This server has the new IP address 192.168.10.194.All these are connected to a Cisco switch SG 200-50 Gigabit Smart Switch. That one is connected to a Cisco 2911 router.
The problem is that, once the old 192.168.0.194 got to be 192.168.10.194, the 192.168.0.195 can't ping it anymore... At least not all the time... Sometime it works, sometimes not... Neither can't the 10.194 ping the 0.195 all the time. When one way works the other one doesn't... When one pings the other one successfully, the other one can't...
View 5 Replies
View Related
Jun 23, 2012
I was looking at a Wireshark capture off my Windows XP box, and I noticed a rather curious behavior. Every 1-2 seconds, the machine sends a ping request to my Linksys WET610N wireless network bridge, which the Windows box connects to the Internet through.
View 1 Replies
View Related
Sep 4, 2012
I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms.
I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms.I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN).
Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't work.I tested it in the safe mode with networking, same problem there.
It slows down our client-server based programs, what's causing it. All I could google up was that disabling Interrupt Moderation would work, it didn't though.Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.
View 2 Replies
View Related
Dec 4, 2011
I'm using a year-and-a-bit old Acer laptop, windows 7. I'm on a wireless network at home, but it keeps on disconnecting me. I always get this message:It'll continue giving this message for a few minutes, and if I'm lucky it will connect me againRestarting my computer/rebooting the router, turning everything off etc. doesn't work, and the windows diagnostic thingy doesn't come up with anything. None of the other computers in my house get this problem
View 1 Replies
View Related
Apr 12, 2011
I have Windows 7 running on my laptop and XP running on my desktop and I am trying to Network both PC's. I have carefully followed the instructions at the following site http://www.howtogeek.com/howto/windo...dows-7-and-xp/ and Network discovery has been 'turned on' on my laptop but when I go to 'Network' on my laptop I cannot see the desktop XP PC. Is it first necessary for me to set up a login password for the desktop XP PC to see the PC on the Network, from the instructions I thought this was only necessary for the Network to remain enabled ie when PC's are restarted?
View 2 Replies
View Related
May 14, 2011
Recently i created a network with 2 XP machines and 1 windows 7, i can able to see XP PCs from windows 7, and windows 7 from XP pcs, even i can able to ping each other with host name and ip address, i can able to access files from XP to 7, but i can not access from windows 7 to XP.i tried everything but could not able to solve it
View 5 Replies
View Related
Mar 9, 2013
I re-installed Windows XP on a dual boot with Windows 7 but I have no access to the Internet.There is no problem with Windows 7. I have Wi-Fi with an ethernet connection.What am I missing? Without Internet access I am unable to activate my copy of Windows XP
View 5 Replies
View Related
Mar 1, 2012
Basically my desktop computer no longer connects to the internet, and I'll try to describe the problem to you all to the best of my ability.I ran ipconfig /all and it is attached.The problem first started a few weeks back and I haven't been able to get around to it due to school. When trying to connect to my router it will connect with limited connectivity (in other words, at the bottom right of the screen when you check the SSID you're connected to, it will show the signal strength, but it also has a yellow exclamation mark indicating it has no connectivity. When I ran the built-in troubleshooter on it, I received multiple things:
- sometimes: "windows could not automatically detect this network proxy settings"
- sometimes: "no errors detected"
Of course I would've done a system restore long ago,however initially I thought the problem was the adapter so I kept re-installing the drivers, I even went to buy other network adapters to make sure my adapter wasn't the one that was defective (I have an ASUS adapter, the other adapters I've tried were D-Link, and Netgear which is also the brand of my router which is very old). Because of all these installs/uninstalls, the old system restores I had were gone. I have Windows 7 64 bit, I'm using wireless connectivity and cannot try ethernet cable due to the immobility of my desktop and problems it would generate around the house. I've attempted to change the IP address of my network properties of ivp4 to defaults, change the DNS server, check my DHCP, check my services, check my registry, and many other things found on the internet (including resetting with netsh)
View 19 Replies
View Related
Dec 1, 2011
So, my computer was having some serious issues, but the internet worked just fine. Me and a friend live in the same building and we're sharing a wireless connection and splitting the cost. I had to reformat my computer (it was windows XP SP3), but when I reinstalled windows it's SP2. I installed the wireless drivers and such, and those work great. However, I try to connect to the network 'Cay13' which is the one I'm sharing with my friend but it won't connect. It will just keep saying 'waiting for the network 'cay13' to connect to the network'. It won't come up with an error, it will just stop and refresh the wireless networks. I will then get a bubble that says 'Unable to connect to preferred wireless networks., Windows will keep trying.' etc... My friend's computer connects just fine so it doesn't seem like it's the router, and I've tried every which way from sunday to configure, connect, uninstall/reinstall the wireless drivers, etc.
View 4 Replies
View Related
Dec 3, 2011
Earlier today I re installed windows XP. Before reinstall my net was working fine. And now it won't connect.I tried to use the installation disc that came with the modem, and partway through the install/set up it says that it cannot find my Gateway.
ipconfig shows " windows up configuration"
And when search the dev managers, network addapters is not in the list.
View 10 Replies
View Related
Dec 25, 2012
Moved into a new place recently, internet has been working fine until earlier today I closed my laptop and went to make something to eat. When I came back and turned my computer back on, it keeps giving me this message when I try to connect. It doesnt ask for a password, it simply tries to connect for a few seconds before giving up. After waiting a few hours for the problem to fix itself, one of my flatmates got home and told me they are having the same issue. I have tried restarting my computer, turning off my firewall and restarting the modem.
View 2 Replies
View Related
Mar 19, 2012
For the past month or two I have been having some problems connecting to the internet on my computer of 6 years everything works fine its running windows 7 and I have no problems but now every time I turn my computer on the first application to connect to the internet is the only one that can connect. If I open a browser it connects but nothing else will and if I close it I have to restart in order to get a connection again.
View 3 Replies
View Related
Nov 11, 2011
I have 2 laptops both have windows 7 and use usb modem to connect to internet, and use Ad-hoc to share connection on 2nd laptop, usually i share connection from my personal laptop for my other laptop but since past few days i am getting error on my other laptop that window unable to connect to network, I tried making new ad-hoc connections with and without authentication but no luck.. but if i make ad-hoc connection on my other laptop and share it to my personal laptop it works and i am able to connect and browse internet without problem.
View 8 Replies
View Related
Jan 28, 2013
I recently upgraded several of my systems to Windows 8 from XP. This, of course, included the update to IE10.Now, I cannot log into the router on my network via a Windows 8 system. It works fine if I use a Windows 7 laptop or an XP unit, but on Windows 8, when I go to the router's address, it prompts me for the Username and Password. It takes the password, and then immediately comes back and asks for it again. Another weirdness is that it won't exit when I choose cancel - only if I select the red X in the upper right corner of the authentication window.
View 5 Replies
View Related
Jan 25, 2011
I've had windows 7 on my computer is my gaming computer i connect it wirelessly to the router downstairsthe power went out because the stge guy changed the meterNow my computer detects the network but will not connect. iv turned off all firewalls iv scanned for viruses but it keeps asking for network key if i put it in it just says windows cannot connect .
View 8 Replies
View Related
Aug 10, 2012
This morning, I tried using the computer and I wasn't able to connect to the Internet. The wireless icon on the bottom had either 1 bar, a caution sign with an exclamation point, or some sun icon. Either way, I could not get to my websites. I don't know why my computer cannot connect to the Internet because my iPad can connect perfectly well as I'm on it right now posting this thread. This is the first time it has happened. A few weeks ago my Internet started getting slower and slower. When it was usually an average of 3 bars, it went down to 2 and stayed that way. I was still able to get to my websites back then however the change in speed was noticeable. Now, it is neither 2 bars nor 3 but 0. y computer because my desktop is upstairs whereas my router is downstairs. With all the cables and such I would just end up messing it up or something. What could I do to fix this problem, it's been like this all day. Is it possible a virus is causing this problem?
View 8 Replies
View Related
