I re-installed Windows XP on a dual boot with Windows 7 but I have no access to the Internet.There is no problem with Windows 7. I have Wi-Fi with an ethernet connection.What am I missing? Without Internet access I am unable to activate my copy of Windows XP
View 5 Replies
My laptop crashed so I sent it in to have my system restored. I just picked it back up and now I can not activate my wifi. I tried pressing F2 but to no avail. What can I do?
According to my system I have Broadcom Virtual Wireless Adapter.
Dell Inspiron N7010
I use to be running on firmware 1.0.2.4 with ProtectLink-Web working great, but then it expired. Some time later I updated the router to 1.0.4.17 and purchased a three year subscription to ProtectLink-Web, followed the registration link on the router, obtained an activation code, followed the activation link on the router and activated the service, however it didn't activate on the router.
I try to activate again and Trend Micro's site just says that it's already been activated. I contacted Trend Micro support and they see the activation attempts on there end and they said everything should be working. They recommended a factory reset which I performed and then attempted activation again, and again their site says that the service has already been activated. And yet when I go to Cisco ProtectLink Web > License > Summary it just says: "Please activate ProtectLink License to display the license information" and wont allow me to access the features. What is going on? Could the firewall be blocking the service? I didn't have this trouble the first time I used ProtectLink with f/w 1.0.2.4
I'm trying to activate parental control for the F5D7231-4 (2000). When I go to the parental control screen, I only get a button to subscribe now (see image). When I click the button, I am sent to the Belkin UK website. I cannot find out how to get the parental controls activated on the U.S. site. I am running the latest firmware (F5D7231-4_US_5.01.11 ).
Update: I looked at the source code for the page in the router...it's referencing a website : [URL] that no longer seems to be valid. Or is this a problem in the firmware ?
How to activate bluetooth in windows 7 OF DELL N 4010?
View 1 Replies View RelatedHow to activate bluetooth in windows 7 OF DELL N 4010
View 1 Replies View RelatedI was trying to upgrade from 8.3.1 to 8.3.2. but I am unable to copy via tftp to the ASA flash or disk0:
ASA5520# copy tftp: flash:
Address or name of remote host []? 10.88.127.153
Source filename []? asa831-k8.bin
Destination filename [asa831-k8.bin]?
[code]....
Half way thru writing to the disk, it goes for a reboot. There is more than enought space on the disk0. I tried copying via a Compact Flash, but the ASA is not detecting the Compact Flash (which I thinks should be disk1). I tried copying a asdm file, even that also went for a reboot.I am stuck now, unable to upgrade
I m unable to take backup of Switch c2960 using
#Copy flash: tftp
while i m taking it show some error
t#copy flash: tftp:
Source filename []? c2960-lanbasek9-mz.122-44.SE6
Address or name of remote host []? 10.23.120.15
Destination file name [c2960-lanbasek9-mz.122-44.SE6]?
%Error reading flash:c2960-lanbasek9-mz.122-44.SE6(Is a directory)
sh flash:
Directory of flash:/
2 -rwx 1919 Mar 1 1993 10:27:17 +05:30 private-config.text
3 -rwx 11056 Mar 1 1993 10:27:17 +05:30 config.text
4 -rwx 804 Mar 1 1993 05:30:42 +05:30 vlan.dat
6 -rwx 2072 Mar 1 1993 10:27:17 +05:30 multiple-fs
7 drwx 192 Mar 1 1993 05:37:02 +05:30 c2960-lanbasek9-mz.122-44.
SE6
I am not able to activate the wireless feature in siemens gigaset se568.
View 1 Replies View RelatedI am using TFTPD32 to upgrade the IOS on a router. When I type in the commands copy tftp flash and enter all the necessary information, the router sits for a minute or so and then times out. There is no entry made in the log when it times out. copy flash tftp yields the same result. The fa 0/0 interface and the TFTP server are both on the same subnet and can successfully ping one anothe
View 16 Replies View RelatedMy Win7 laptop was unable to ping another WinXP within the same network. When I first got this Win7 laptop, I experienced this problem. The WinXP laptop has no problem pinging the Win7 system. A visiting friend changed the setting on the Win7 laptop and suddenly the two laptops were able to talk to each other. I wiped the WinXP laptop a few weeks ago. Since then, the Win7 laptop is again unable to ping the WinXP. I have googled for many hours now. I tried just about all the methods that make sense to me but still cannot ping from Win7 to WinXP. How I can reestablish communication between these 2 systems on the same network?
View 5 Replies View RelatedSometimes I need to administer the server, but always need to VPN. Can RDP be active while a separate VPN is active?
View 3 Replies View RelatedA while back my faithful old IBM ThinkPad became very slow under the weight of too many applications and updates so I replaced it. Now I have decided I would like to revive it mainly as a games machine for my young grandson, so I wiped everything off it and reinstalled Windows XP Home Editon (it previously had XP Pro). It used to access the net via a wireless LAN card (IEEE802.11b/g) and this worked fine. I am now having difficulty reinstalling this device. I thought XP would just pick it up but it doesn't. I tried downloading a driver onto a memory stick using my new laptop but that doesn't work either.
View 8 Replies View RelatedI have USB card and I'm trying to hook it up to my mini laptop it's a windows CE 6.0
View 1 Replies View Relatedi have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.
View 1 Replies View RelatedI purchased Product # FL-WEBVPN-10-K9=
What i got was a price of paper paying gratitude for purchasing a license and a CDROM with a video on Electrostatic discharge and copies of the user agreement in several languages. How do i actually activate and use this license? The router is already setup for the SSL vpn. It just doesn't connect. I am assuming it is because i have no license installed?
How do i activate my xbox 360 console to my HP computer (windows7) so i can listen to music if u can resawn
View 2 Replies View RelatedI have ipsec policy that I need to activate/deactivate using batch! So is there a way to activate policy using netsh?
View 1 Replies View RelatedI have downloaded the WampServer, however it is indicating that one of MySQL's Apache didn't Active yet. So how to activate all of the WampServer's services.
View 1 Replies View RelatedI have a new asr9010 that I want to upgrade from 4.2.0 to 4.2.1 sofware. When i try to run the "install activate isk0:asr9k-mini-p-4.2.1 sync" it fails and complains that the 2 files below or equivalent must be active.
iosxr-infra V4.2.0
iosxr-fwding-4.2.0
When do a show version i can see files are loaded and on the asr9010. Attached is a show tech
We bought a CISCO1941 K9 router. To enabled IPSec feature, I need the PAK to active IPSec on 1941. Where I can buy a valid PAK? Could it be done via on-line support?
View 5 Replies View Relatedeven i have bought a new dell Inspiron n5050 and am not able install the bluetooth driver the msg reads "Activate bluetooth using wireless switch".Even mobility centre dosent hv the option......how to customize using Dell INC.
View 12 Replies View RelatedMy laptop's keyboard just dead and I can't no longer activate it wifi.My laptop is Toshiba and it usually use fn+f8 key to activate, but since my keyboard got broken yesterday,I don't really know how to activate it.
View 2 Replies View RelatedI Have a WAG200G wireless modem but I can not activate VPN on my Phone 4 , but it is easily done by Zyxel modem.
View 4 Replies View RelatedI got a problem with a cisco asa 5580 like two days ago and the device stop working (there was a mainteinance window and after that the device didn't work). Now we receive the RMA and we are trying to configure the failover so the new device get the configuration form the one that is working.
But this is the message that I gettin:
Failover message decryption failure. Please make sure both units have the same failover shared key and crypto license or system is not out of memory
We already changed the shared key and crypto license but the failover is still down, what are the features that the cisco need to activate to enable the failover?
How to activate the bluetooth on Dell Latitude e6420
View 5 Replies View RelatedI am using Latitude D531 and Wndows 7 32 bit OS.
How can I able to activate bluetooth facility on my laptop.
i cant activate the hard Wireless N 1030.The interface activate many seconds and desactivate im self .
View 1 Replies View RelatedWe just bought smartnet for our cisco 5510. How should i activate this support and get the benefits.
View 2 Replies View Relatedi have a pix 525 running 8.0(4) and asdm 6.1(5)i have two ethernet interfaces, and two gb ethernet interfaces
i connected both gb ethernet interfaces to a switchport, configured as trunkcan't seem to activate subinterfaces on the gb interface on the pix 525.
i purchase new dell laptop n 5040 model. after sometime my blue tooth is not working properly.
troubleshoot symbol with yellow triangle and code 43 error always showing
also by data cable of nokia n 72 model mobile phone i tried join with pc but mobile also not seeing in device .
I have WAP4410N and AP-1131AG for the school lab's Access point. First, WAP4410N doesn't make connection to wired network.
There's no DHCP server in our school and uses below :
192.168.x.x ip address
255.255.0.0 Subnet
192.168.1.254 Gateway
210.220.16.7 DNS address.
So I seted these settings on the configuration page, but when I connect to the WAP4410N wireless, I can't connect to the internet. Problem reporter in Windows 7says there's IP adress problem on the access point. ...but the ip address is correct. I did everything on the manual ....
Second, AP-1131AG. I entered with console cable and changed the ip address. And I enabled wireless radio(default:disabled) but I cannot find SSID with wlan. I added SSID on SECURITY-SSID manager. It says 'interface on' on 802.11a/g, but it is the same. I can't find SSID. other labtops can't, too.. tried using vlan. FAILED....
since i got my laptop "Dell Inspiron N5040",i tried many times to activate Bluetooth got device configuration from Ur official site>>and try to install it but i failed and shocked by notice appears to me if i try to install device "Activate Bluetooth using wireless switch"after many trials ,installation of other application in same driver config.is finished and Bluetooth icon appear on desktop but not working device manager , Bluetooth driver look "driver not working properly"and driver coated by yellow triangle try to uninstall it and reinstall again but nothing is changed tried "bluesoleil" and not solve my problem.....
View 4 Replies View Related
