Can RDP Be Active While A Separate VPN Activate

May 19, 2011

Sometimes I need to administer the server, but always need to VPN. Can RDP be active while a separate VPN is active?

View 3 Replies


Cisco Wireless :: Aironet 2600 / WLC With Authentication Against Two Separate Active Directories?

Feb 22, 2013

I am evaluating a Cisco wireless solution for our building. The building is occupied by two separate but related companies, which share some basic network infrastructure (some switches, an Internet connection, a DMZ environment), but which have two completely separate "Windows networks" with separate Active Directories. Each of these two networks are placed behind separate Microsoft TMG firewalls, each of whose external NIC are connected to the same DMZ network.
a) Acquire a set of Aironet 2600 APs and a controller, b) establish a BYOD SSID to be share between the two companies and guests, connected to the shared DMZ network, c) establish two additional separate SSIDs - one for each company’s staff, each authenticating against the appropriate AD-environment (incidentally, one is a straight Windows Server 2008 R2 environment with a TMG 2010 firewall and the other uses Windows Essential Business Server, so based on Window Server 2008).
Is that even possible with a single WLC?We are on 3 floors and about 60 people total. I am thinking that we can make do with 5 or 6 APs. Without having looked into it much, the 2500 controller looks good. Agree?

View 2 Replies View Related

Cisco Firewall :: ASA 5520s From Active / Standby To Active / Active

Jul 17, 2012

I have a pair of ASA 5520s operating in failover pair as active/standby, having two contexts on them. I am planning to share the load and make it active/active making first context active on the primary unit and second context active on the secondary unit. My question is if this will disrupt any connectivity thru these firewalls when I do "no failover" on the active/standby and assign the contexts to different failover groups and enable the failover back.

View 6 Replies View Related

Separate Port 4 Into Separate Vlan?

Jan 16, 2013

My fiance recently signed up for the Screen-wise Panel for Google research. Basically they monitor your TV usage and your internet usage. As part of the program they installed a Cisco WIFI router. I've got no issue with them logging the sites visited etc but I'm a little worried about them possible collecting private information (banking / work related stuff) that I don't want going out there. According to what I've read what's supposed to happen is they replace your router with the new Cisco router.The "technician" who came in and installed the router was actually a builder and not an IT technician and rather than replace our router he connected the Cisco router into port 4 of our router... I wasn't in at the time.

What I was looking to do is separate Port 4 of my router into a separate VLAN that can access the internet, but not access anything on ports 1-3, or the wireless. However, I want to be able to see everything on port 4 from the other side (in other words I want to see "into" the port 4 VLAN, but don't want them to see out). I also wanted DHCP to assign IP addresses correctly depending on where you were plugged in. In this example the first VLAN (your current router ip address) is going to be on, and the second VLAN (the new on we create on port 4) is going to be on is exactly what I'm looking to do, I could then connect the kids machines / tablets / ipods to the Cisco router and have the main machine and my work laptop on the main router... but I don't have a clue how to do it. </quote> Is this something that I am able to do with the Netgear router I own and is it hard to set up?

View 1 Replies View Related

Cisco Firewall :: ASA 5585X Active / Active Failover Group Inter Routing

Mar 20, 2012

I am looking at deploying a pair of 5585X's in an active/active multiple context state.  I am creating Mulitple contexts that need to be able to route to each other.  I was going to deploy a type of Gateway context that has a shared interface to all of the other contexts, instead of sharing interfaces directly between the contexts, i beleive this will work as basically i am just cascadng the contexts and sharing interfaces.
The main problem i have come across, is that if i deploy active/active across two appliances using 2 failover groups i can not see a way to route between them, for example. 
I have Context 1, Context 2 and Context GW A including the shared interfaces of Con1 and Con2  in failover group 1 on appliance A with the respective standbys on Appliance 2. I have Context 2, Context 4 and Context GW B including the shared interfaces of Con 3 and Con 4 in failover group 2 on appliance B with the respective standbys on Appliance 1.
I need to be able to route traffic between Context GW A and GW B so that the contexts can communicate in normal operation and in failover.  I do not beleive that I can share an interface between contexts in two separate failover groups and to be honest without adding a L3 device between the appliances i am not sure if this is possible.

View 9 Replies View Related

Cisco Firewall :: ASA 5510 Configuration Modifications In Active / Active Mode

Dec 17, 2012

I have two ASA 5510s running in Active/Active mode. I need to make config changes on them. How do I go about it? Do I power off the secondary ASA and make the config changes on the primary and then power on the secondary ASA ? Or this another way to do this?

View 3 Replies View Related

Cisco Firewall :: ASA5520 - Active / Active Failover In Multiple Security Contexts With Dual ISP?

Jun 1, 2011

I have an ASA5520 in location A with an ISP connection and a matching ASA5520 in location B with a separate ISP connection. We have fiber connecting the two locations and vlans passing back and forth so I will be able to configure the failover via a vlan as well as extend the ISP's to each location via vlans. The Active/Active configuration with the multiple security contexts does not seem to be an issue but how is a redundant ISP configured in this mode?We want to have context A using the ASA in location A with ISP1 as the primary and failing over to ISP 2 in locaiton B We also want to have context B using the ASA in location B with ISP 2 as the primary and failing over to ISP1 in location A Would route tracking provide the desired result? Is there a better option?

View 1 Replies View Related

Cisco Switching/Routing :: 6509 Series Switches Support VSS Active-Active Chassis

Feb 7, 2012

The 6509 Series Switches support the scenario VSS Active-Active Chassis, I would like to setup both switch's as one virtual switch but working at the same time, not with Active - Stand By Chassis.
My plans it to create PortChannel accross both Switches 6509 in order to have 2 links one connected to one slot/switch and the other connected to slot/switch in the second 6509 for servers redundancy.

View 1 Replies View Related

Cisco Switching/Routing :: ASR1000 - Dual ISP Active / Active Connection On Single Router

Jun 10, 2012

I am working on a network which has two ISP connections (Active/Active) terminating on router (ASR1000). From the LAN side (6500 switch) all the traffic need to be route on ISP1 but some of the specific subnets like need to be route on ISP2 connection.
I am planning to use PBR and NAT with route maps. any documents or refrences are provided.  
(access switches)---------(core switch)----------(routers)----------------(ISP1)

View 1 Replies View Related

Cisco WAN :: 4507 R - Active SUP Lost Connection And Standby Came Active

Apr 10, 2011

I faced one problem in our core switch 4507 R . Active sup lost connection and standby came active. We got lot of errors/alerts on console shown below. [Code] Also when I reloaded the switch with reload command only both sups got reloaded but I want to reload all the modules but reload command do not gives any options for that.

View 2 Replies View Related

Cisco Firewall :: 5520 - ASA Active / Active Failover And IPS Failure

Mar 30, 2011

I have 2 asa 5520 firewalls including and 1 AIP-SSM-10 module in each of them. the configuration is set using active/active failover and context mode.
Both of them run individualy the IPS module. The IPS is configured using inline mode and fail-open option. However when one of the module fails and the state is changing from up to init or anything else making the IPS to fail then failover is detected and ASA consider it as failover and bounce context to the other unit.
IPS soft is 6.0(4) and ASA soft is 8.0(3)
I have checked cisco doc and it is confusing to me. it says:  "The AIP-SSM does not participate in stateful failover if stateful failover is configured on the ASA failover pair." but it really does participate. Running is not really an option because of production network impact matter..

View 2 Replies View Related

Cisco VPN :: Active / Active ASA 5520 Remote VPN Access Limitations?

Sep 19, 2011

We have an Active/Active ASA 5520 setup, as i know in Active/Active setup there is no remote VPN access, So i could overcome this limitations?I have a solution but i dont know if it is ablecable or not? we have a spare ASA 5510, so i can use it behind Active/Active Firewalls and assign a public static NAT IP address to it and open all IPSEC and VPN ports and let the remote users to connect to it, is this ablecable setup or not?

View 1 Replies View Related

Cisco Firewall :: ASA5585-X Active / Active Failover Using Etherchannel?

Dec 27, 2011

its possible to set up active/active failover using etherchannel on 5585s? 

View 1 Replies View Related

Cisco Firewall :: How To Configure ASA5520 For Active / Active

Mar 17, 2013

How to Configure ASA5520 for Active/Active

View 8 Replies View Related

Cisco Application :: CSM Active / Active In 2 Redundant 6500s

May 7, 2007

our application team is mandating, that the solution we should come up with for SLB, should support Active/Active mode of SLB operation.
My question, is this mode of operation supported/accredited by Cisco, and what is the draw back from the traditional active/standby.

View 2 Replies View Related

Cannot Activate Wireless LAN Card

Jun 27, 2011

A while back my faithful old IBM ThinkPad became very slow under the weight of too many applications and updates so I replaced it. Now I have decided I would like to revive it mainly as a games machine for my young grandson, so I wiped everything off it and reinstalled Windows XP Home Editon (it previously had XP Pro). It used to access the net via a wireless LAN card (IEEE802.11b/g) and this worked fine. I am now having difficulty reinstalling this device. I thought XP would just pick it up but it doesn't. I tried downloading a driver onto a memory stick using my new laptop but that doesn't work either.

View 8 Replies View Related

How To Activate USB Card On Laptop

Jul 15, 2011

I have USB card and I'm trying to hook it up to my mini laptop it's a windows CE 6.0

View 1 Replies View Related

Cisco VPN :: 887 Cannot Activate SSL VPN License

Aug 7, 2012

i have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.

View 1 Replies View Related

Cisco VPN :: Activate License For SSL VPN On 891 With IOS 15?

Jul 10, 2011

I purchased Product # FL-WEBVPN-10-K9= 
What i got was a price of paper paying gratitude for purchasing a license and a CDROM with a video on Electrostatic discharge and copies of the user agreement in several languages.   How do i actually activate and use this license?   The router is already setup for the SSL vpn.   It just doesn't connect.  I am assuming it is because i have no license installed?

View 1 Replies View Related

Unable To Activate Copy Of Windows XP

Mar 9, 2013

I re-installed Windows XP on a dual boot with Windows 7 but I have no access to the Internet.There is no problem with Windows 7. I have Wi-Fi with an ethernet connection.What am I missing? Without Internet access I am unable to activate my copy of Windows XP

View 5 Replies View Related

Activate Xbox 360 Console On HP Computer?

May 20, 2011

How do i activate my xbox 360 console to my HP computer (windows7) so i can listen to music if u can resawn

View 2 Replies View Related

How To Activate Ipsec Policy Using Netsh

Sep 7, 2012

I have ipsec policy that I need to activate/deactivate using batch! So is there a way to activate policy using netsh?

View 1 Replies View Related

Servers :: How To Activate WampServer Services

Apr 9, 2013

I have downloaded the WampServer, however it is indicating that one of MySQL's Apache didn't Active yet. So how to activate all of the WampServer's services.

View 1 Replies View Related

Cisco WAN :: Asr 9010 Does Not Want To Activate All 4.2.1 Images

Jul 26, 2012

I have a new asr9010 that I want to upgrade from 4.2.0  to 4.2.1 sofware. When i try to run the "install activate isk0:asr9k-mini-p-4.2.1 sync"  it fails and complains that the 2 files below or  equivalent  must be active.
iosxr-infra V4.2.0
When do a show version i can see  files are loaded  and on the asr9010.  Attached is a show tech

View 2 Replies View Related

Cisco VPN :: PAK To Activate VPN On 1941 K9 Router

Jul 1, 2012

We bought a CISCO1941 K9 router. To enabled IPSec feature, I need the PAK to active IPSec on 1941. Where I can buy a valid PAK? Could it be done via on-line support?

View 5 Replies View Related

Dell :: N5050 - How To Activate Bluetooth

Jul 25, 2012

even i have bought a new dell Inspiron n5050 and am not able install the bluetooth driver the msg reads "Activate bluetooth using wireless switch".Even mobility centre dosent hv the to customize using Dell INC.

View 12 Replies View Related

Laptop Keyboard Dead / Can No Longer Activate It

Feb 23, 2013

My laptop's keyboard just dead and I can't no longer activate it wifi.My laptop is Toshiba and it usually use fn+f8 key to activate, but since my keyboard got broken yesterday,I don't really know how to activate it.

View 2 Replies View Related

Activate Bluetooth In Windows 7 On Dell N 4010?

Sep 6, 2012

How to activate bluetooth in windows 7 OF DELL N 4010?

View 1 Replies View Related

How To Activate Bluetooth In Windows 7 Dell N 4010

Jan 30, 2012

How to activate bluetooth in windows 7 OF DELL N 4010

View 1 Replies View Related

Linksys Cable / DSL :: WAG200G Can't Activate VPN On IPhone 4

Feb 21, 2012

I Have  a WAG200G wireless modem but I can not activate VPN on my Phone 4 , but it is easily done by Zyxel modem.

View 4 Replies View Related

Cisco Firewall :: Cannot Activate Failover On Asa 5580

Sep 27, 2011

I got a problem with a cisco asa 5580 like two days ago and the device stop working (there was a mainteinance window and after that the device didn't work). Now we receive the RMA and we are trying to configure the failover so the new device get the configuration form the one that is working.
But this is the message that I gettin:
Failover message decryption failure. Please make sure both units have the same failover shared key and crypto license or system is not out of memory
We already changed the shared key and crypto license but the failover is still down, what are the features that the cisco need to activate to enable the failover?

View 5 Replies View Related

Dell :: How To Activate Bluetooth On Latitude E6420

Mar 13, 2012

How to activate the bluetooth on Dell Latitude e6420

View 5 Replies View Related

Dell :: Inspiron N7010 - Unable To Activate Wi-Fi?

Nov 7, 2012

My laptop crashed so I sent it in to have my system restored.  I just picked it back up and now I can not activate my wifi.  I tried pressing F2 but to no avail.  What can I do?

According to my system I have Broadcom Virtual Wireless Adapter.

Dell Inspiron N7010

View 1 Replies View Related

Copyrights 2005-15, All rights reserved