A while back my faithful old IBM ThinkPad became very slow under the weight of too many applications and updates so I replaced it. Now I have decided I would like to revive it mainly as a games machine for my young grandson, so I wiped everything off it and reinstalled Windows XP Home Editon (it previously had XP Pro). It used to access the net via a wireless LAN card (IEEE802.11b/g) and this worked fine. I am now having difficulty reinstalling this device. I thought XP would just pick it up but it doesn't. I tried downloading a driver onto a memory stick using my new laptop but that doesn't work either.
i have Dell Latitude E6500 and i want to use this SIM card solt but i don`t know how and i tried alot to active it but with no success ..any way i use Win 8.
I have WAP4410N and AP-1131AG for the school lab's Access point. First, WAP4410N doesn't make connection to wired network.
There's no DHCP server in our school and uses below :
192.168.x.x ip address 255.255.0.0 Subnet 192.168.1.254 Gateway 210.220.16.7 DNS address.
So I seted these settings on the configuration page, but when I connect to the WAP4410N wireless, I can't connect to the internet. Problem reporter in Windows 7says there's IP adress problem on the access point. ...but the ip address is correct. I did everything on the manual ....
Second, AP-1131AG. I entered with console cable and changed the ip address. And I enabled wireless radio(default:disabled) but I cannot find SSID with wlan. I added SSID on SECURITY-SSID manager. It says 'interface on' on 802.11a/g, but it is the same. I can't find SSID. other labtops can't, too.. tried using vlan. FAILED....
I've just bought a L655D-S5164 and installed Windows 7 64. I get the wireless to work but the indicator light remains red (should be blue) and i can't activate/deactivate the wireless via Fn+F8. The wireless card is a RTL8188CE.
I have two Wireless LAN Controllers 2504 and 8 APs 3502e. The WLCs are running software version 7.0.116.0. The problem is that I don't have the mesh option to configure indoor mesh inside the controller. In chapter 9 of Wireless LAN Controller Configuration Guide, Release 7.0.116.0 says that I have to go to Wireless Menu and select the AP. When I am inside the AP general page, the guide says I have to go to the Mesh tab, but that tab doesn't appear in the controller GUI. Do I have to use another image in the controller? Or do you have to use an special mesh code or something like that? Because in the download page of the controller it only appears the 7.0.116.0, two more new versions but there is nothing about mesh image.
Mine is Inspiron N5030 Laptop(New). When i try to install Blue tooth driver it asks me "Activate Bluetooth Using Wireless Switch" . I tried to press f2 & fn+f2. But no changes. I went to BIOS and Everything was enabled and proper.
I have a Dell Inspiration - 1525 Laptop. I can't activate wireless network. I have seen a button in right side of computer, but problem is when I turn on the button the Bluetooth will be turn on and wireless not connected. How can I Connect Wireless net in my computer?
I have just recently bought a Dell inspiron m5030 and after downloading the driver for bluetooth from DELL website and trying to install it a window saying Activate Bluetooth using Wireless Switch is shown. I pressed Fn+F2 but nothing happened.
I have installed wireless 365 bluetooth driver but then of course the pop up says to activate the bluetooth using wireless switch. No dice. When I press the wireless switch I only see my wi-fi connection. I have checked device manager and no bt shows there. Also when I type 'bttray' under the start menu nothing shows up in the search.
Is this laptop even able to support bluetooth? I have searched through many other similar questions and have been unable to find any info on this for the n7010.
BTW: Windows 7, x64... let me know if you need other info.
I recently installed 2 wlc 5508 with the latest software 7.3.101.0. I am not able to activate the Internal DHPC Server. The following message appears: "Error in setting dhcp scop leasetime".
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
i have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.
What i got was a price of paper paying gratitude for purchasing a license and a CDROM with a video on Electrostatic discharge and copies of the user agreement in several languages. How do i actually activate and use this license? The router is already setup for the SSL vpn. It just doesn't connect. I am assuming it is because i have no license installed?
I re-installed Windows XP on a dual boot with Windows 7 but I have no access to the Internet.There is no problem with Windows 7. I have Wi-Fi with an ethernet connection.What am I missing? Without Internet access I am unable to activate my copy of Windows XP
I have downloaded the WampServer, however it is indicating that one of MySQL's Apache didn't Active yet. So how to activate all of the WampServer's services.
I have a new asr9010 that I want to upgrade from 4.2.0 to 4.2.1 sofware. When i try to run the "install activate isk0:asr9k-mini-p-4.2.1 sync" it fails and complains that the 2 files below or equivalent must be active.
iosxr-infra V4.2.0 iosxr-fwding-4.2.0
When do a show version i can see files are loaded and on the asr9010. Attached is a show tech
We bought a CISCO1941 K9 router. To enabled IPSec feature, I need the PAK to active IPSec on 1941. Where I can buy a valid PAK? Could it be done via on-line support?
even i have bought a new dell Inspiron n5050 and am not able install the bluetooth driver the msg reads "Activate bluetooth using wireless switch".Even mobility centre dosent hv the option......how to customize using Dell INC.
My laptop's keyboard just dead and I can't no longer activate it wifi.My laptop is Toshiba and it usually use fn+f8 key to activate, but since my keyboard got broken yesterday,I don't really know how to activate it.
I got a problem with a cisco asa 5580 like two days ago and the device stop working (there was a mainteinance window and after that the device didn't work). Now we receive the RMA and we are trying to configure the failover so the new device get the configuration form the one that is working.
But this is the message that I gettin:
Failover message decryption failure. Please make sure both units have the same failover shared key and crypto license or system is not out of memory
We already changed the shared key and crypto license but the failover is still down, what are the features that the cisco need to activate to enable the failover?
My laptop crashed so I sent it in to have my system restored. I just picked it back up and now I can not activate my wifi. I tried pressing F2 but to no avail. What can I do?
According to my system I have Broadcom Virtual Wireless Adapter.
