How To Know The Network Key Or Passphrase
Feb 19, 2011i forget the network secutity key
View 1 Replies
ADVERTISEMENT
Can't Connect To A Wireless Network With Laptop / Security Key / Passphrase
Apr 1, 2011i cant connect to a wireless network with my laptop coz it keeps coming up with enter security key or passphrase
View 2 Replies View RelatedBelkin Routers :: How To Reset Passphrase Or Network Key On N300
Dec 24, 2012I've just hooked up my previously used N300 router. The router is showing a solid green light, and the laptop recognizes that a solid Belkin wireless connection is out there. I cannot for the life of me remember the network key and/ or pass phrase I originally set. No, I did not tape this info to the underside of the router as suggested in Belkin instructions.
View 6 Replies View RelatedTo Find Wpa Security Passphrase
Dec 30, 2012I can't print from my wireless printer. It wants to know my WPA security pass phrase. Where do I find this?
View 3 Replies View RelatedFind Wpa Security Passphrase?
Apr 25, 2012where do i find the wirelesswpa security passphrase
View 1 Replies View RelatedFinding Security Key Or Passphrase For Wifi?
Apr 28, 2012I have had to re format vista and reload my WiFi. My internet connection using an ethernet cable to my LAN works ok but when the ethernet cable is removed and I click "connect" I am asked for my security key or passphrase. How do I find this information or preferably remove the request for it?
View 1 Replies View RelatedReconfigure Passphrase Configured On HP Printer?
Mar 2, 2011I need to re-configure the passphrase configured on my HP printer.How do you run the wireless network set-up in order to re-enter my wireless network WPA security passphrase?
View 1 Replies View RelatedHow To Change Passphrase On Linksys E1000
Mar 16, 2011I have a passphrase for my router that I need changed but I don't know how. I was told that if anyone knows my phrase word that they can access my router.
View 1 Replies View RelatedWireless :: Netgear Wn2000rpt Cannot Get Past Passphrase
Jun 19, 2011I have a new Netgear WN2000rpt extender and cannot get past passphrase on the install wizard...nothing happens after I enter my passphrase and select "continue"..
View 1 Replies View RelatedLocate The WPA Passphrase For Netgear 7550 Gateway?
Jan 21, 2013locate the WPA passphrase for netgear 7550 gateway?
View 2 Replies View RelatedSetup A Security Password Or Passphrase For Wireless Internet?
May 3, 2011I have windows vista and a Atheros adapter?is there a way to just go through control pannel?
View 2 Replies View RelatedLinksys Wireless Router :: How To Change Passphrase On WRT160N V3
Sep 17, 2012A few months ago, I purchase, installed and configured a WRT 160N V3. And I couldn't be happier. I now would like to go back and change the passphrase that a user needs to enter when they connecting to my router. Currently it uses the default value. And I would like to make it a bit more friendly. I found a number of postings dealing with setting retrieving or changing the Admin password.
But I was not able to find anything on changing the “passphrase”. There probably are a number of postings on the subject, and I simply overlooked them.
Linksys Wireless Router :: Difference Between Password And Passphrase?
Dec 16, 2011Is there a difference between (1) the Router Password (on the Admin tab of the web-based utility), (2) the Wireless Security Passphrase (on the wireless security tab of the web-based utility) , and (3) the password on the Router Settings in the Cisco Connect application?
View 2 Replies View RelatedLinksys Wireless Router :: Finding Security Key Or Passphrase?
Dec 28, 2007My wife has a laptop that we want hooked up to the internet through our linksys wireless router. But I cannot remember my security key or passphrase needed to get her on the connection. How do I recover, or find, it?
View 9 Replies View RelatedLinksys Wireless Adapters :: WRT54GS - Cannot Enter WPA2 Passphrase
Mar 10, 2013After a lot of effort I got my wireless adapter to work like it should without security. I set WPA 2 level security on my WRT54GS wireless router and then went to access the router (set up as an access point) with the WPC54G ver 2 adapter on a Thinkpad T22, it says I have WEP encryption and I cannot enter the passphrase I used for the router. It does not let me select AES. It says to pick AES or TKIP, but TKIP is the only choice.
View 1 Replies View RelatedHome Network :: Private Network Within A Larger Network?
Nov 14, 2011I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.
Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options.
Access Internet Using Wireless Network And Printer Using Separate Wired Network At Time?
Apr 4, 2012I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies View RelatedWindows 7 Laptop With Atheros AR9285 Network Card Can't Connect To Wireless Network?
Aug 21, 2012This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedSharing :: Change Network Settings So Internet Connection Appeared As Public Network
Jan 25, 2011I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies View RelatedD-link Dcs Network Camera :: Netgear Cgd24n - 942l Just Won't Connect To Wifi Network
Sep 2, 2012I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
D-Link DCS Network Camera :: 2121 - When Plugged In Without Network Cable / Status Led Remains Red
Mar 26, 2011I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.
View 2 Replies View RelatedHome Network :: Use Laptop As Network Tap Between (DSL) Modem And Wrt54gs By Creating A Bridge?
Jan 8, 2013I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
Home Network :: Setup A DC++ HUB For Sharing Data Within The University Local Network?
Feb 13, 2011I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies View RelatedHome Network :: Linksys WRT54G With DDWRT Firmware / Network Goes Down Randomly
Aug 16, 2011I have a crappy router/modem from comcast with two windows machines and a linux web server connected. I also have another router, a Linksys WRT54G with DDWRT firmware with WAN connected to the modem/router. The linux web server has a static IP, configured with /etc/network/interfaces The network goes down randomly. Disconnecting and rebooting the linux web server usually fixes it. It's possible that the WRT54G could be at fault as well.The problem is that I just don't have any information on what is happening on the network. (Well even if I had the information, I'm not sure I would know what to do with it) I installed wireshark, I figure I should just leave it running until the network goes down, then I can go through the packets and see if I see anything weird?
View 4 Replies View RelatedCabling / Cards :: Unidentified Network - Cannot Access Internet With New Network Adapter
Oct 8, 2012i can search for networks. As you can tell i am currently on the internet on my laptop. I can search for the current network i am on through my adapter. I then connect to it. It says im connected to a unidentified network. It will not let me search the internet or anything else.
View 9 Replies View RelatedHome Network :: Add Printers To Local Wireless Network Without Sharing From Computer
Mar 3, 2012I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies View RelatedCisco :: PIX 525 Firewall / Voice Network Not Working After Data Network Migrated
Feb 28, 2012My company have a Cisco PIX 525 firewall which is cater for NOC internal data network and also voice network, the subnet for data network is 192.168.2.0/24 and the subnet for voice network is 172.16.2.0/24. someday this NOC firewall was faulty. I was migrated the data network from this NOC firewall to the other temporary firewall just at the moment. And the voice network i migrated it from where it orginal at NOC firewall to a VOIP system which actually having a connection with my temporary firewall(This temporary FW only to take the traffic of data network). After the migration of data network from old firewall to temporary firewall and also the migration of voice network from old firewall to PABX system. The subnet for data network remain the same as 192.168.2.0/24, but the subnet of voice network i edit from 172.16.2.0/24 to 192.168. 3.0/24.Now when i want to use one Cisco router 2600 to replace this temporary firewall then facing problem at the voice network....The data network after migrated from temporary firewall to new 2600 is ok, users can browsing. But when i trying to at the same time when the data network been migrated , it will affect the voice network which still located at PABX. ..user cannot make call...I was thinking reason because this voice network which currently in 192.168.3.0/24 is tight to somewhere on the 192.168.x.x at the old firewall internetwork. So, when i migrated the data network over to new router, it will also cause the failure of voice even thought after i migrated the voice system to new router.So when i do the disaster recovery back to the temporary firewall for both data and voice. The voice is resuming to normal.
View 4 Replies View RelatedD-Link DCS-930L :: IPhone App OK Via Home Network (Mac) / Can't Connect Via Cell Network
Apr 7, 2011Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies View RelatedCisco WAN :: 1841 WIC To Configure BRI Interface In Network Protocol Emulate Network
Apr 5, 2011I'm trying to configure my BRI interface in "network protocol-emulate network" and "layer1-emulate network" but i don't have this second command.Is someone have allready to that with this type of interface ?I've to configure this because the ISDN line of my telco is in user mode only.
View 5 Replies View RelatedCisco :: Enable Guest Network Authentication In Network With WLC 4404 Controllers And No WCS?
Feb 18, 2013What's the least expensive way to enable Guest Network authentication in a network with WLC 4404 controllers and no WCS? Management would like guests to register with a valid email address and enter a 'password du jour' to keep unauthenticated users from chewing up bandwith with automatic connections.
View 4 Replies View RelatedHome Network :: Cisco Linksys E1500 - Wireless Security Protocol For Guest Network?
Oct 29, 2012Having an issue with a Cisco Linksys E1500 on a home network. The device has a feature to provide a guest wireless network but the guest network can't get to the internet. A wired connection is fine, as is the normal wireless network but not the guest. The cheesy thing is, that it doesn't list an option for what type of wireless security protocol you want on the guest network. I'm assuming that it uses the same security protocol that the normal wireless network uses, but who knowsEspecially weird is that it asks you what password you want on the guest network but then the guest network show to be insecure when you try to connectthought maybe it was something funky with some of my configurations so I went ahead and factory defaulted it and just set it up with an insecure network for both the normal and guest networks. This didn't solve it. The guest network still couldn't get to the internet. In fact, the guest network can't even ping the router.
View 1 Replies View RelatedHome Network :: Use Access Point As Main Network Device
Aug 15, 2012I currently have a BT Home Hub 3 router and an Ubiquiti Power AP N.What I am trying to do is use the Ubiquiti access point as the main device for all connections in my house (ethernet and wireless) so that I can use the QoS settings etc. I basically want the Home Hub router to play as little role as possible in the network except for providing the ADSL internet connection.I know I need to enable DHCP on the access point but everytime I do so the devices connected to the access point lose internet connection.(BTW I have an ethernet cable connected from one of the routers LAN ports into the access point's WAN port)
View 2 Replies View RelatedNetwork Switch Managed Vs Unmanaged High Network Speeds
Jun 5, 2011I'm looking to connect my 50+ drops I have in my home based business. I transfer large files 5+gigs on a regular basis between the machines. I currently just have some cheap Netgear 8port, gigabyte switch's but when transferring files I max out around 12-15mb/sec. This takes WAY too long to transfer files.
I need a network switch so I can get my speeds up to 60+mb/sec at least. (my seconds job office has this ability)
What would I need to get this kind of speed? All my cabling is CAT6, with CAT6 ends. Would I need a managed switch to get this kind of speed?
I was looking at a couple switches. Cisco Sg 100-24 24-PORT Gigabit Switch $374 or Cheaper option Netgear Prosafe GS724T-300NAS 24 Port Gigabit Smart Switch W/ Rack Mount Kit $199
Or is there something else I could go with in this price range?
