Home Network :: Setup A DC++ HUB For Sharing Data Within The University Local Network?
Feb 13, 2011
I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies
ADVERTISEMENT
Mar 3, 2012
I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies
View Related
Jun 22, 2011
I wanted to setup a home network for primarily sharing my music, pictures and videos.I have a PS3 which can stream the video/music and display the pictures from a media server to my TV.I was wondering between NAS and a desktop computer? and wanted to know which was the better or cheaper solution? (2 much 2 ask for both)
Main Issues
--Will NAS work with PS3?
--Incase of a computer, i know i will be able to use logmein or gotomypc to Download files directly to that machine even when im not home and when i do get home its ready to go. Can the same be achieved with a NAS?What else should i consider? i.e. pros and cons of both.
View 6 Replies
View Related
Mar 10, 2012
I should set up a network for a little enterprise.The requirements can be summarized as follows:
- All the "business" softwares have to be stored in a single computer (let's call it "the server"). The other computers (in this case there should be at most 2 or 3 computers) can execute these softwares through the server. So there are no local copies of those softwares on clients, only on the server.
- The main computer (the server) shares also a printer.
- All the computers in the network, are interconnected through a single wi-fi modem/router. Some of them are connected through the wi-fi interface and others through an ethernet cable.
the server, in order to perform some special procedures, has to connect to a special modem which connects it to a remote private network. In order to do so, the server disconnects from the local enterprise network because Windows does not allow me to stay connected to more than one network at the same time.The remote private network does not require to disconnect from any other network, it's just a constraint imposed by Windows.In the meantime, clients are not able to execute softwares anymore and cannot print anything.when the server is connected to the private network, it still needs to execute the "business" softwares.
Is it possible to keep the server connected to both the networks without denying the access to softwares, data and printers to anyone? If yes, how?If not, how can I design the topology of the network in order to share softwares and other data among all the computers (server and clients)? It's important that when the server connects to the private network every computer (including the server itself) can still access softwares, data and printers.
View 1 Replies
View Related
Jun 28, 2012
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies
View Related
Feb 24, 2013
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
View 5 Replies
View Related
Nov 1, 2012
There is a device which is connected to the PC via Lan. I have an exe file which is supposed to get connected to that device and perform some operations. However, the problem is, the exe file tries to connect to the local host ip address 127.0.0.1 and i cant change the ip since it's been coded.So, I'm wondering if i can use the device connection (which already has a different ip like 169....) as a local host connection. So whenever it tries to connect to the loopback 127... it automatically connects to the external device.
View 2 Replies
View Related
Mar 17, 2012
I am planning to deploy a "Digital Notice Board system" in my office, which gets feed from web server and display data/stream on LCD Screen. Well i am done with implementing all the interface on server side and its working pretty well with client side computer. But instead of using Client Side Computer, I just want to use LCD and make some network interface of Local Area Network directly with LCD (to save cost/installation/maintenance of a dedicated computer with LCD ).
View 1 Replies
View Related
Apr 4, 2013
i purchased vaio with win8. Under network icon, I can not see any other computers in the local network therefore not able to access shares unless i explicitly map the shares which is tedious.
On other computers running win7 and xp, each of them can see each other under network icon.However that is not the case with my laptop running 8. Actually i have seen once or twice all pc-s show up but most of the time, they dont appear.
I read somewhere that following service need to be checked to make sure they are running: upnp, ssdp in services. I checked those and they are all running.
I also enabled "turn on network discovery" under network and sharing->advanced sharing. setting. To make it more complicated there are private and public and all network setting. I enabled all items as follows:
1. Private Turn on network discovery is checked along with Turn on automatic setup of network connected devices Turn on file and printer sharing is selected Allow Windows to manage homegroup connections is selected.
2. Guest or public Turn on network discovery is selected Turn on file and printer sharing is selected.
With these settings I still dont see the local computers and their shares. Do I need to check anything else?
View 2 Replies
View Related
Jan 5, 2012
I have a client(C) and a server(S) nodes plus an intermediate node(I). Each node has a public IP. What I want to do is to transmit some data(whatever) from C to S but this data to go through I. So C ---> S will become C ----> I ----> S. I read something to create a tunnel(ip add tunnel) between C and I and add a route between them ? I tried different examples but did not work at all.
View 2 Replies
View Related
Aug 3, 2011
The link to Local area connection on the PC i am working on is no longer showing under Network and Sharing center. However the connection is up and I can access the internet. If I do an ipconfig /all I see the adapter setting as I set them. In device manager the device is working properly. I checked the BIOS and the NIC is enabled
View 4 Replies
View Related
Feb 26, 2012
What are the list require for setting up Data Center for either University or Government?
View 4 Replies
View Related
Sep 23, 2012
I am hoping to have my internal data NOT sent via the router.I'm trying to figure out if data from the Windows PC to the Ubuntu PC goes via the N750 AND the router or just the N750.It should be noted that the N750 is set up as an access point with DHCP/NAT disabled. I have read that switches (and I assume this "access point") can store the MAC Addresses of computers to cut out the router, but I'm not sure how to make sure that that's happening.
View 2 Replies
View Related
Nov 27, 2011
I just installed my new TV by Samsung UA55D6400. it's great. I understand that it can be connected to local home net. it has Wireless LAN Built-in BU no Wireless LAN Adapter Support. What I have to buy and install in order to connect it to the local net and also stream movies to it?
View 3 Replies
View Related
Dec 13, 2011
I am having problems setting up a network, recently bought a used linksys router and had to restore to default settings. Now I am trying to set it up but I cant go to the ip 192.168... it times out, but when I go online and do the same thing I get a FW-1 at checky: Access denied. error. This is obviously my first time setting up a network using a router. what am I doing wrong? I checked drivers and I have tried plugging the cat5 into both internet and the 1st and 3rd port with little success, either a timed out connection or an error.
View 9 Replies
View Related
Jul 5, 2012
I am using windows 7 and i have a folder which I share between other computers and laptops at home, but I want to share that folder as a web page, for example if i type the www or the ip address it should appear like a web page, i guess that way it will be faster then normal shared folder, is it possible that I assign an IP to that folder and forward it to the network users?
View 5 Replies
View Related
Feb 11, 2011
I want to get the ability to share folders between my PC using a Wireless router. One of the pc's is a Desktop running using XP SP3 and the other is a laptop running Vista SP1. how to set up away to just share certain folders between the two machines?
View 1 Replies
View Related
Dec 6, 2011
lost wifi access thru local (home) connection. can connect thru public network. my grandma during last visit accidentally changed the network to her laptop. Have tried to reset netgear wnr2000v1 with pin in back. turned off and waited and turned back on again--no success. have tried to set up new network--see the network listed but no internet access available. have modem/router from comcast. My laptop is Acer Aspire 5733 with Lan Broadcom and wireless lan atheros.
[code]....
View 10 Replies
View Related
Jan 9, 2013
I have a PC that connects to a wireless connection. I would like to share this connection with MORE THAN ONE PC. I have read it is possible to share it with ONE other PC via a crossover cable.I would like to share this to a router so that the PCs connected to the router can use this connection. Is this possible?If so, what would I need?(Other than a crossover cable and router)Side note: I'll be sharing this connection to a wireless router - so I'm hoping to basically relay the connection that way.I know it is possible to buy extenders that extend the range of wireless connections, but this is where the restrictions come into play...-We are not able to network these computers on the wireless network, as we do not manage it and have some quite strict privileges.-The router will also be used to share a hard drive via USB.
View 2 Replies
View Related
Feb 7, 2011
I have a desktop and a laptop each using xp. Each is set up to connect to the internet wirelessly, through different networks. I do not wish to disturb those settings.I want to set up a third, ethernet network, linking the desktop and laptop, for file sharing only, no internet.
View 11 Replies
View Related
Jan 1, 2012
How do you set up a network of 2 computers so that one computer without the actual software on its hard drive can run programs that are on the other computers hard drive?
View 1 Replies
View Related
Dec 30, 2011
I have decided to set up a simple network at my home. I have got 2 PC's (one ground floor, one up staris), printer, TV and router.Now, my router has got only 4 sockets for RJ45 (no usb connection available). My target is to have one storage hard drive of 2TB for sharing pictures, files and automatic backup from PC's. Make of my router is D-link DIR-615. I want to have PC's connected by RJ45 for quick file transfer and TV as well to load movies from external/network hard drive so 3 of 4 ports are already used.I want to have my printer online in network all the time, so any PC can print at any time without connecting USB cable. Also I do not want to plug my printer into PC downstaris and share it in the network because if PC will be switched off, PC upstaris won't be able to print. So I want all my devices have connected to the router. Printer does not support ethernet interface as well (only usb connection).I've got a choice to buy an External Hard Drive (USB) or Network Hard Drive. I have choosen these two:
[URL]
As I said, I got 2 devices to connect to my network, and there is also one port available. I know, we got many different hubs etc, but what about printer? It supports only USB 2.0.I have also found very basic NAS on ebay:
[URL]
I thought I could by external hard drive because it is cheaper than network, and connect it together with my printer to this NAS and then NAS to router. Will I loose file transfer speed?
View 1 Replies
View Related
Nov 6, 2012
Okay so I had all this set up to be simple back in windows 7.
Basically, what I did was turn off password required sharing or whatever, so all I had to do was click on networks in the left side panel when i was in My Computer and click on say, my wifes laptop and it'd open the public folder she had there, and I could drag and drop stuff into and out of it. And same for her and seeing mine.
Now that I have windows 8 on my PC It's all buggered up.
I didn't change ANY settings on HER laptop, but when I try and access it (I used it to back up important files while fresh installing w8) it's asking me for a username and password
View 3 Replies
View Related
Jun 2, 2011
I've got a modem which feeds a wireless router; plugged into the router via ethernet cables are my personal computer in my room and an office computer. Connected wirelessly is my kitchen PC. My printer (Canon MX330) is not wireless/bluetooth and is connected via USB to my office computer.
Office / Kitchen Computers: Windows XP My Personal Computer: Windows 7
I'm trying to set up a network/file sharing system, and more importantly, I'm trying to be able to print on a computer other than my office computer.
View 1 Replies
View Related
Feb 9, 2012
I finally got my 2 computers networked and seeing each other but when I try to share a file from comp B to comp A all I get is the data files, no .exe or application files. Can I not run a game stored on another network computer?
View 3 Replies
View Related
Jan 14, 2013
I have a home wi-fi network that connects through a router/modem to the Internet. There are three up-to-date Windows Vista (Home edition, I think) laptops on the network all of which connect wirelessly to the router/modem. The network is password protected (for security purposes I turn off network discovery. And I don't use file sharing between the laptops). In other words, I have three laptops connected to a common wireless Internet connection (the router/modem). I also have a desktop computer (that I use for projects and gaming), but I don't have a wireless network adapter nor a long enough ethernet cable to connect to the router. I don't have any technical problems connecting to the Internet using a crossover ethernet cable. It's just impractical as I have to dismantle the whole desktop computer system (printer, monitor, scanner, etc etc) and carry it to a different room within cable distance of the router every time I need to update the software or activate a new application.
View 6 Replies
View Related
Jan 24, 2012
I plan on starting a high speed LAN for my Gaming LAN party's. We send 100's of GB of data over our LAN networking when we do this, so i need a good switch that can handle the stress of the massive data transfers. It needs to be a gigabit switch and at least 8 RJ45 ports.or is there a different one i should get all together? i cant spend a butt load. url...
View 3 Replies
View Related
Nov 13, 2012
Local Access Only on Vista PC
I restored an old Vista laptop to out-of-the-box state to give to my Dad. This laptop had a wireless connection to the internet and network previously. After the restore, I can't get a connection to the internet, even though my router sees it and it has an ip address. It says Unidentified Network Local Access only, and it doesn't see any of the computers on the network. Sometimes the other computers see it but can't connect, sometimes, the other computers don't see it. I hate Vista.
Stats on Laptop:
Toshiba A215-S4747
Atheros AR5007EG
All my other eight devices have an internet connection no problem, but I powered off the modem and router a couple of times with no change. I tried updating the Atheros to the latest driver on Toshiba's website for this model, but it doesn't seem to take. If I uninstall the old drivers, Windows rudely just immediately reinstalls them again. If I just update the driver, and pick the new file, the driver version remains the same as the previous driver. I'm banging my head on the wall with the driver
Ping successful on:
192.168.1.11 (the laptop's IP address)
localhost
[Code]......
View 11 Replies
View Related
Aug 11, 2012
I'm sure this may appear to have been asked before but I've scoured the Internet and can't find anything exactly applicable to the setup I'm trying to achieve. I had a sky ADSL connection in my living room that had my tv, ps3, NAS and netbook wired in. I've since changed to a sky fibre connection but this had to be installed in the master phone line which is upstairs. This obviously isn't a problem for all of the wireless devices around the house including the netbook and ps3 in the living room. The NAS and TV are still wired to the old router so can see each other with no problems. Any pc trying to connect to the NAS can just switch to the old router via wifi if desired. The only problem I have is that the TV can no longer access the Internet.
I initially tried to use ICS on the netbook (it's left on permanently) - it's wired to the old router and wirelessly connected to the new one. This appeared to be working for a while but is no longer playing ball. I've tried bridging the connections and the tv and NAS both had Internet access but it's very sporadic.Is this a reasonable setup or should I be looking for another solution? I can specify a manual ip, subnet and default gateway on the tv if necessary - I was going to point it towards the bridge's gateway but I don't know about IP?
View 1 Replies
View Related
May 29, 2011
I live in an apartment and I am forced to only use the apartment's internet service to go online. There are two ways to access the apartments network; via ethernet port or wifi. Once im connected and try to browse, I will first be taken an http login page to enter my username and password. The problem with this is I can only use the username and password for one computer at a time. Trying to get my second laptop to access the web using the same user and password will give me an error saying it is currently being used. As I have two laptops (work and personal), I would like to share the internet connection using a device that will allow either or both machines to connect simutaneously. What device will I need?
View 8 Replies
View Related
Oct 12, 2011
I want to know which protocols are used to share files via lan.Both the machines are running windows.
View 6 Replies
View Related
Jul 20, 2012
They both have laptops and share data via a flash drive and emails between the two laptops.This is the scenario, They both input data into one excel spreadsheet on laptop 1. Laptop 2 works on data, puts it onto a flash drive then goes to laptop 1 and opens the spreadsheet and enters data from flash drive.My thought is wouldn't it be great if they could use some type of VPN? They could both work from home and access each others computer files, spreadsheet and databases.
View 2 Replies
View Related
Mar 5, 2013
I am trying to transfer files from Laptop A to Laptop B. I can transfer files from B to A, but I can't transfer them from A to B. When I try to, I get an error message saying "Windows cannot access Laptop A".It then gives me the option to diagnose the problem (I'm using Vista on both laptops, by the way). When I click that, it gives me the error of "Cannot communicate with Laptop A. We pinged the remote host but did not receive a response".Laptop A is connected to the network according to it, it can access the internet fine and can access other laptops on the network fine. I have disabled the firewall, shared the folders appropriately, made sure they were both on the same workgroup (they are both on the default Vista WORKGROUP), and still nothing.
View 19 Replies
View Related
