Linksys Cable / DSL :: WAG200G As Wireless Extender / Repeater

Jun 19, 2012

I got myself a HW500G as my main Wireless router. But as I moved to a new home with a very large space, I did start to have alot of dead spots which made me think about getting my old WAG200G out of the box and use it as Wireless extender.Is that possible with WAG200G and If yes, can you provide me with guidelines on how to do so.

View 2 Replies


ADVERTISEMENT

WLR 4000 - How To Use A Linksys Wireless G Access Point As A Repeater / Extender

Aug 10, 2011

I have a Sitecom WLR 4000 wireless router. I also have a Linksys Wireless G Accespoint. Can I use that AP as a extender/repeater for the Sitecom router? If yes, how to configure one and other?

View 4 Replies View Related

Linksys Wireless Router :: Using DIR-600 As Repeater Or WLAN Range Extender?

Oct 11, 2012

Can I use the WIRELESS 150 ROUTER DIR-600 as repeater or WLAN range extender?

View 1 Replies View Related

Linksys Cable / DSL :: Set WAG200G As A Wireless Bridge?

Feb 13, 2011

I tried to set my WAG200G as a wireless bridge, but I encountered some problems doing so.
 
First I reseted the router to factory default settings, then I put it in "bridge mode only" disabled DHCP and UPnP (this was required for the college network I want to use on it to work). Then I put the UTP cable in one of the LAN ports.
 
When I try to acces this network though a wire everything works fine, I can see the other devices connected to the network and I can acces the internet. When I try to use the network wirelessly, I still see the other devices on the network but I can't connect to the internet. (The acces to the internet is gained by logging in inside the browser, like with wifi hotspots)

View 1 Replies View Related

Linksys Cable / DSL :: WAG200G - Create LAN Bridged To Internet By Wireless

May 7, 2012

I have a WAG200G as my ADSL modem and wireless access point.  I would like to build two small wired networks that are remote from the location of the wireless access point (i.e. where my telephone line comes in) so that I can connect several network cabled devices in each location (e.g. NAS drive, TV, games consoles etc).  I cannot run network cables to these locaations but believe that I can bridge them via the wireless.  At a pinch, I could have only one cabled sub-network but would prefer two.

View 4 Replies View Related

Linksys Cable / DSL :: WAG200G No More Wireless Signal After Firmware Update?

Feb 26, 2011

i did recently bought that new router to equip my house, also did a new firmware update to latest version 1.01.09 found on official website.
 
sadly it did kill my wireless network....
  
how to downgrade? im hardly looking on the internet for older version but cant find any..

View 3 Replies View Related

Linksys Cable / DSL :: Wag200g Could Set Wireless Properly But No Internet Access

Apr 26, 2012

I am basic user of Wireless WAG200G, I am using only as router,the problem is that i could set the wireless properly. When i restart the computer, I couldn't get internet access unless I go to ( 192.168.1.1) & do rebooting for the device. I believe that the setting are not correct.

View 2 Replies View Related

Wireless Repeater And Extender Same Thing?

Jan 21, 2013

I struggle getting a wireless internet signal in some parts of my house downstairs and all upstairs. Is a wireless router or repeater the same thing and which do I need.

View 3 Replies View Related

Linksys Cable / DSL :: WAG200G Change From Annex B To A

Mar 4, 2007

Possible using a firmware upgrade to change the wag200g from annex B to annex A?T

View 6 Replies View Related

Linksys Cable / DSL :: WAG200g Factory Reset Itself?

Aug 10, 2011

I have been using Linksys WAG200g as a modem&router at my home for few years already and it did a great job. Plugged it on 24hours non-stop. Default firmware.
 
However, in the past months WAG200g did the factory reset by itself. It happened once a month, 3 months in a row already. No body pressed the reset button nor use the web admin to reset it. It reset itself. All the SSID, IP Address, passwords, etc are reset to default.

View 1 Replies View Related

Linksys Cable / DSL :: WAG200G Won't Connect To Internet?

Feb 21, 2011

Tried connecting my laptop...internet doesnt work. Tried doing restarts and stuff nothing seems to work.

View 1 Replies View Related

Linksys Cable / DSL :: WAG200G Can't Activate VPN On IPhone 4

Feb 21, 2012

I Have  a WAG200G wireless modem but I can not activate VPN on my Phone 4 , but it is easily done by Zyxel modem.

View 4 Replies View Related

Linksys Cable / DSL :: Access Restrictions On Wag200g?

Feb 7, 2011

I set the access restrictions as instructed but they refuse to work. Firmware version is :-1.01.05,have rebooted, with no success.

View 6 Replies View Related

Linksys Cable / DSL :: WAG200g - Use Device As Router Only?

Jul 13, 2011

My internet provider servers internet, telephone an digital cable TV to my flat.For using this, they sent me an AVM Fritz Box.It really works well..... except file transfers over LANWhen I try to copy more or less large files (above 4 GB) the Fritz  Box fails, freezes or just drops all network connections...However: I hate this thing.
 
For my old provider, I brought my Linksys WAG200g and it really worked fine - due to this I'd like to install it the following way:
 
ISP -> Fritz.Box -> WAG200g -> LAN

View 2 Replies View Related

Linksys Cable / DSL :: How To Update Firmware For WAG200G

Mar 10, 2007

how to update the firmware for WAG200G? I've downloaded the firmware from internet, but i don't know what to do next...

View 3 Replies View Related

Linksys Cable / DSL :: How Much Hard Disk Does WAG200G Has

Jan 31, 2011

Well, I am just curious, how much hard disk does a WAG200G has? And how much memory and what processor? Is it hard to point me to a datasheet including every chip or/and component it has?

View 3 Replies View Related

Linksys Cable / DSL :: WAG200g Connect To Another Router?

Oct 18, 2011

I want to connect my wag 200g to another router. My other router have ip address 192.168.2.1 and is connected to my isp and my wag 200g is 192.168.1.254. What i want is to connect my wag 200g to the other router and to share the internet connection. I want also the dhcp server on the wag 200g to assign ip address to the wireless users connected on the wag 200g with ip addresses to the network 192.168.1.0.

View 2 Replies View Related

Linksys Cable / DSL :: Connection Dropping On The WAG200G?

Nov 1, 2012

whenever the phone is in use i.e. a call comes in or the phone is being used to dial out, the connection will drop.  I have tried changing the microfilter on the Phone Socket, and it seemed to resolve it for a while.Should I perform a Factory Reset? I am using the latest firmware which is 1.01.06 ?

View 1 Replies View Related

Linksys Cable / DSL :: WAG200G Connection Drops?

Dec 4, 2008

Having the issue for over a year now, I'm wondering why there isn't a fix for the mentioned connection drops of the WAG200G? I'm on the newest firmware now (1.01.08(3)) but still every so many minutes: bam, lost connection.

View 9 Replies View Related

Linksys Cable / DSL :: Connection Dropping On WAG200G?

Dec 14, 2008

whenever the phone is in use i.e. a call comes in or the phone is being used to dial out, the connection will drop.  I have tried changing the microfilter on the Phone Socket, and it seemed to resolve it for a while.
 
Should I perform a Factory Reset?  I am using the latest firmware which is 1.01.06 

View 4 Replies View Related

Linksys Cable / DSL :: WAG200G - Keep Loosing Internet Connection?

Mar 1, 2012

My IP provider has upgraded my broadband speed in early Jan. They require ADSL2. It seems to coincide with this date that I keep loosing my internet connection on a regular basis, say every 2 days or so, but not consistent. The cure is to unplug the linksys WAG200G ADSL home gateway. Plug it in again and all is well, until the next time. On the box it says the until is ADSL2/2+ compliant.

View 2 Replies View Related

Linksys Cable / DSL :: WAG200G - Slow Down A Modem Router?

Mar 23, 2011

Is there a way through settings (I have a Linksys WAG200G modem/router) to slow the internet speed (much like shaping)?

View 2 Replies View Related

Linksys Cable / DSL :: WAG200G Video Conference System

Mar 21, 2012

I have connected CeeLab C300 video confernce system to our lan connectet to linksys wag200g. I have forwarded all the ports listed in manual to work without public ip. The problem is that system connect with our branch in other city, sound is great but i have no video on our tv. The other side has an audio and video but using public ip. Is a wag200g compliant to work with videoconferencing system? Support of the Ceelab ask me that Linksys is capable to NAT the H323 codec for audio & video/

View 1 Replies View Related

Linksys Cable / DSL :: WAG200G - X3000 Keeps Restarting Every 3-5 Minutes

Oct 24, 2011

As soon as I set it up it would keep restarting every 3-5 minutes. It would sync with the ADSL line, wireless ok and then boom restart again.I've tried every singe setting, googled the problem, updated the firmware to the latest and still no luck.Then  I had it replaced today with a new one and I faced exactly the same problem so I am thinking that eitherI am completely useless (which I would like to think I am not) or I got stuck with a batch of faulty X3000.Currently I am on linksys WAG200G that has been working non-stop for ages and the only reason I upgraded is that I wanted faster streaming.

View 9 Replies View Related

Linksys Cable / DSL :: WAG200G - Home Gateway Setup

Jun 25, 2012

I have a Linksys WAG200G wireless ADSL router. So it has one ADSL(phone) line input port , 4 Ethernet ports and wireless router. My router is fine and works well on ADSL connections. But as I have switched to Comcast DOCSIS modem based internet connection now, I want to to setup this router as "Home Gateway" only and not the modem. My intention is to use- use 1 of the 4 ethernet ports at the back of router as an INPUT . I want to put the ethernet output of the DOCSIS modem into this INPUT- and then i want to use the remaining 3 Ethernet ports as OUTPUT ports from the router.- I also want to work my router as Wireless router.

My query is- Is this possible ? Basically use 1 port as an input and 3 as output.- I have tried different things - Using Bridge mode only. DHCP disabled but sometimes only wireless works and other times only LAN bridge setup works but both do not work together.- Also at times, one Ethernet port will work as an INPUT and 1 as an OUTPUT but other two remain disabled.

View 4 Replies View Related

Linksys Cable / DSL :: WAG200G As Bridge Mode Does Not Work?

Aug 20, 2011

I have an ADSL Modem WAG200G Annex A, with latest firmware. I recently purchased a Linksys E2000 to upgrade my wireless to N, plus to get 4 gigabit Ethernet Ports for my NAS.
 
The problem is, I set WAG200G to "Bridge mode only", and from within E2000, I provided PPPoE credentials (user name and password), it does not work, no Internet connection!
 
Normally, with the WAG200G, PPPoE credential is set as followings (and it works)
 
Type: PPPoE Multiplexing: LLC Virtual Circuit: "0"  for VPI (0~255) and "33" for VCI  (0~65535) "Keep Alive" option
 
on E2000 Router, PPPoE does not have the above option for me to select. Only User Name and Password field

View 4 Replies View Related

Linksys Cable / DSL :: WAG200G Windows Live Messenger

Dec 23, 2011

I have a wireless router Linksys WAG200G.Im having trouble since a few days for use Windows Live Messenger 2009. I tried some tips for correct (cleaned cache, uninstall and re-install the software, checked the firewall, programs related to the software, etc).I was thinking that this was a trouble with my computer, but was made tests with other 3 computers, that cannot connect too (and can connect in others wi-fi connections, in other places) and in the attempts are being generated the same error: 8100030d.Searching in the internet, i saw that the problem could be with the router.
 
I didnt made any changes in the router configuration, and are using this equipment since last 2 years without any problem. I didnt tried to reset the configuration yet. But tried to disable the router firewall, and the problem occurred again.I tried some tips in this forum, like changing the MTU and including ports of messenger in the router configuration, but it didnt work.

View 3 Replies View Related

Linksys Cable / DSL :: Can WAG200G Work With ADSL2 / VDSL

May 2, 2011

I have been using a Linksys Wireless-G ADSL  WAG200G, Annex-A  Gateway Router and it has been fine, now my ISP have told me that they are modernising the network and will need a router capable of managing ADSL2/ VDSL connections, so will my router be able to do that or will I have to buy a new one? It has firmware 1.01.09?Edit: I see in the DSL Modulation menu which is set at present to "Multimode" I also have options to select ADSL2, ADSL2+, ADSL2 AnnexM, ADSL2+ AnnexM and ASDL2 AnnexL but I do not see any mention of "VDSL"

View 2 Replies View Related

Repeater / Wireless Extender For Cisco Aironet 1041?

Nov 16, 2012

I have a Cisco Aironet 1041 , what a good repeater/wireless extender that works with it to cover an area of 50 squared meters ?

View 4 Replies View Related

D-Link DIR-655 :: Wireless Range Extender Or Repeater / Booster

Nov 20, 2011

I am moving my office from one side of the house to the other which has real spotty wireless coverage. Most likely I will not be able to move the modem or wireless router, so I have to somehow increase the range.I did some research and poking around on forums, but I can't find a clear cut, number 1. What you think would be the best option to pair with the DIR-655.

View 1 Replies View Related

Linksys Cable / DSL :: WAG200G Slow Connection After Firmware Upgrade?

May 7, 2012

My Linksys WAG200G worked like a charm in these 4 years, never had connection problems... the firmware was 1.00.09 One week ago i updated the firmware to last version (1.01.09) and now i have slow connection problems, sometimes it doesn't load web pages... I tried to hard reset and I tried to downgrade to different firmwares found on the web (1.01.01 and 1.01.05)What should I do? Is it possible to find the original 1.00.09 img?

View 1 Replies View Related

Linksys Cable / DSL :: Upload HTM File To WAG200G Using Command Prompt?

Feb 9, 2011

is it possible to upload a htm file to the router using a command prompt? the page is located at [URL] I want to change the option of Allow All to Restrict Access at 8pm every night?

View 3 Replies View Related

Linksys Cable / Dsl :: Limiting Connection With Wifi Router Wag200g

Feb 11, 2012

I have problems with my wifi router linksys wag200g.we have 2 pc in my home, and every time the other one connects to internet i lose almost 80-90% of speed connection.can i do something to limiting the speed of the other computer?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved