Netgear Extender For Wifi At Home Lost Password?
Dec 4, 2012
I just installed a Netgear WiFi extender. In order to set all the preferences, it wants a password and login and I have no idea what that is. I tried everything I could think of, but no go. how to reset the pw and figure out what my login is? Have had no response that addresses this problem. I am using Win 7 and I have an ARRIS cable modem. I've already gone thru the users guide with a fine tooth comb and have found nothing. I have been using WiFi on Netgear equipment for years, so it's not a new network. I also tried the login=admin and password=password and that didn't work.
View 3 Replies
ADVERTISEMENT
Jan 30, 2013
I purchased the latest range extender, but the password was not logged, so we cannot use the NetGear extender shown in the wireless network list.
View 3 Replies
View Related
Jan 22, 2013
How do I change the username and password on my home wi-fi extender (Netgear). I can't remember my original username and password and it will not let me use the extender until I put it in.
View 3 Replies
View Related
May 21, 2012
ADSL Box in office ground floor - Range extender in 1st floor lounge - portable Win7 64 in dining room next to lounge (1st floor) Setup proceeds and completes as it should but the problem: The portable connects to the new link *_EXT but with "no access" (the extender is not connecting to the router). Having read several reviews about connection problems with this kit, none seem to have the problem I have.
View 10 Replies
View Related
Dec 3, 2011
The router I'm connecting it with is a bright house RCA dwg855t. I go through the setup and the net gear device isn't receiving an IP address from the router.
View 1 Replies
View Related
Jun 11, 2011
Re-set my netgear wireless internet, including lost codes and pass words access gateway was 4c
View 1 Replies
View Related
Dec 25, 2012
I'm running Windows Vista on PC. Have a Netgear router. Just bought Netgear range extender WN3000RP. Have the extender plugged in and light is green. When I try my PC's wireless network manager, it does not recognize any wireless devices to add. How can I connect to the extender wireless network when it is not recognized on my wireless manager??
View 1 Replies
View Related
Apr 9, 2012
I have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies
View Related
Jan 17, 2013
Can I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?
View 4 Replies
View Related
Nov 22, 2011
i have lost my sky wifi security password and i was wondering if i can get an instant reply and talk to a person and not a computer about how i can get my wifi password.On the router ther is a sticker with all these codes on it and none of them seem to work at all when i type them in on my other laptops and computers
View 1 Replies
View Related
Sep 2, 2012
I've lost wifi router password. how can i find it?
View 1 Replies
View Related
Nov 17, 2011
how to know the password for netgear wifi
View 1 Replies
View Related
Apr 13, 2013
I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.
Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )
View 2 Replies
View Related
Jan 1, 2012
need passwords for netgear 1 wifi . free
View 2 Replies
View Related
Jul 4, 2012
I am trying to connect my Kendel to my home wireless network, but I have forgotten my password to make the connection.
View 1 Replies
View Related
Jan 3, 2013
Forgot password to connect to home wifi
View 2 Replies
View Related
Dec 11, 2012
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies
View Related
Nov 10, 2012
my wireless connection (netgear 79) fluctuates often from 5 bar signal dropping to 1 - computer repairman suggested programming an extender into router...my computer is only 8 ft. from router in another room...would a second router do better and/or easier to implement
View 1 Replies
View Related
Aug 29, 2012
I bought a Netgear WN3000RP Extender for better wifi range, because on my room upstairs I have no signal at all (so called dead spots) So, I installed it a few months ago and all was working fine, untill we had to leave the house for vancation. Someone in the house pulled the extender out of the electric outlet. A few weeks later we pulled it back in it, but here started the problem: I installed the extender again, but now without any succes. (Just incase you want take a look: [URL]
There are 4 LED lights attached to this extender. 3 of them are lighting, but the 4th won't light at all. LED's: [URL]
I did the exact same procedures as exampled in the installation manual, but nothing worked. I always got this error on the end of the unsuccesful installation: Move the extender closer to the existing router or gateway.
Im really sure the extender is in the range of my actual router!
I've tried everything from restoring to factory defaults to WPS, DPS, disabling security, Nothing works.. I always get stuck on the error. (With WPS I press both the buttons on the extender and the router, but they cant find each other.)
View 5 Replies
View Related
Jun 14, 2012
Can I use netgear WGR 614 as range extender of another wireless router?I already using a model with wireless router, i have a spare netgear WGR 614. I want this router to pick up wireless signal from the first wireless router then share the internet on ethernet port only.
View 4 Replies
View Related
Apr 5, 2011
I have a Netgear wnr2000 v3 wirless router. Im trying to get the Verizon Samsung Network extender to work on it. I am using a ethernet cable not wireless. When i go into the Netgear's Control panel and click attached devices it does not show it and it wont work. I called verizon and they gave me port numbers to put it in the port fowarding but you need the IP address which i dont know
View 3 Replies
View Related
Apr 5, 2012
basically, my iMac detects the extender as routername_EXT which is fine, but says that the password i type is wrong. when i use my original router with my iphone with the same password it works, but when i try to use it with my extender it says that the password is wrong.
View 1 Replies
View Related
Aug 9, 2011
I recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.
View 2 Replies
View Related
Jul 17, 2011
I recently bought a Netgear WN2000RPT from Best Buy and I couldn't manage to get past the setup (wouldn't connect with my existing router), and I'm returning it tomorrow.
I just need to repeat the wireless-G signal downstairs to the other side of the house upstairs.What are your recommendations?
View 1 Replies
View Related
Mar 26, 2013
I have a Netgear N300 and am using a linksys wrtg54g flashed with dd-wrt as an extender. I would like to setup my wireless network to limit various devices (laptops, iPod touch, etc) to certain times of the day.
How do I configure both devices to limit connectivity? I've got it down pretty much on the NetGear using a MAC address filter and scheduling the services, but I am not sure how to get the extender to do the same.
View 3 Replies
View Related
Jul 31, 2011
Familiar with the WNDR3400 but I purchased it when it first came out only to replace it with my E4200. The WNDR3400 has a "wireless repeater function" and I was wondering if it was in any way compaitable witht he E4200 or does it have to be directly connected to use it as an accesspoint/range extender ?
View 4 Replies
View Related
Jul 7, 2011
I have basically the following setup: It's a home network, running with a Netgear WNDR3700 wireless router.
Wireless Devices on the Network:
Google Nexus One: 802.11 b/g/n
iPhone (Original): 802.11 b/g
Main Workstation Laptop: 802.11 a/b/g
"Beater/Other" Laptop: 802.11g b/g
Ethernetted devices on the network:
Logitech Revue: CAT-5e
I'm running both the 2.4 GHz and the 5.0 GHz networks over the same SSID. The goal, obviously, is to get everything over to N if possible. I've heard that wireless N has much better signal and transfer rates, is this true? Also, is running the two different frequencies with the same SSID problematic? It's kind of strange, because my Nexus One is having a difficult time staying connected to the network in my office while the main workstation laptop in the same room is getting a much better signal.
[Code]....
What's interesting is that both are running on the 2.4 GHz networks, essentially both not on the wireless n network, which kind of defeats the whole purpose of things. Is it bad to run both the 2.4 and 5.0 GHz networks with the same SSID? If using a network repeater, is it bad to rebroadcast the original network with the same SSID as the source network? It seems that the 5.0 GHz network is getting "clobbered" by the 2.4 GHz network. Is it really necessary for me to broadcast using different SSIDs?
View 1 Replies
View Related
May 7, 2013
I just replaced my DIR-655 with a DHP-1320 since the constant microwave usage in our house whacks out our wireless during breakfast and dinner time. Now the PCs on the other side of the house are connected over a Home-Plug network.Is there a way to connect the DIR-655 to one of the Home-Plug ports on the distant side of the house to "extend" the wireless coverage there for our laptops? Presume this is a different scenario than creating a "bridge", "access point", or "extender" since the router would be connected back via Ethernet cable. There may be some overlap too in wireless coverage around the middle of the house. Ideally I'd like to use the same SSID.Has this ever been done before? What would I need to reconfigure on the DIR-655?
View 5 Replies
View Related
Feb 17, 2013
My F9K1106 range extender (brand new out of the box) will not connect to my router. I have an ASUS RT-N66U router. The Belkin extender keeps telling me the password to the router (WPA2 security) is incorrect. Every other device (bridges, computers, tablets, mobile phones) connects to the router perfectly with the given password.
View 7 Replies
View Related
Feb 23, 2013
I bought this router to extend my wifi signar from my cable router. Now I know that it is possible using the WR841ND as an wifi extender using third-party firmwares but what I like to know is if there is any way to make the router work like that but using the original firmware. I followed a guide that explained how to do it but the only thing I can do is extend the wireless signal without the internet acess.
View 1 Replies
View Related
Jun 1, 2012
I installed a tp link extender to boost wifi at home (2 storey) and since then I have noticed that upstairs where the router is installed the signal is weaker than downstairs where the extender is located.
View 2 Replies
View Related
Dec 29, 2012
At the moment the Wireless Router is located in my bedroom which is 12 meters from the living room where the phone line is. I basically have one phone line extension from the telephone line to my bedroom where I've plugged in the ADSL filter. The modem part plugs into the actual router and the telephone line is then extended back to the living room with a second extension cable.This is because my PC is in my bedroom. Problem with this is the fact that there are extension cables get in the way when moving furniture around and also hang from the ceiling in the corridor.What I'd like to do is have a WiFi dongle for my PC and move the router to the living room. Now my second problem is that my phone gets a very weak WiFi signal once you go to the living room so I imagine if I moved the router to there then I would barely get a signal in my bedroom. I have two options to solve this:
(1) Use a WiFi extender in between my room and the router and then a dongle for my computer
(2) Upgrade my current G router to an N router. Problem is I'm not too sure the signal will reach my room. There's a 12 meter range from the living room to my bedroom btw.url...
View 4 Replies
View Related
Dec 27, 2012
I lost the cd to set up my n600 netgear wireless router. How can i set up my router without the cd?
View 1 Replies
View Related
