I have a Netgear wnr2000 v3 wirless router. Im trying to get the Verizon Samsung Network extender to work on it. I am using a ethernet cable not wireless. When i go into the Netgear's Control panel and click attached devices it does not show it and it wont work. I called verizon and they gave me port numbers to put it in the port fowarding but you need the IP address which i dont know
View 3 Repliesbasically, my iMac detects the extender as routername_EXT which is fine, but says that the password i type is wrong. when i use my original router with my iphone with the same password it works, but when i try to use it with my extender it says that the password is wrong.
View 1 Replies View Relatedcell phone extender req. 300kbps I have only 100mbps, they didn't mention min when I ordered it? Now they say that's the fastest broadband I can get due to distance from server &/or availability is what I have?
View 4 Replies View RelatedI need to make this connection to be able to operate a Enphase Solar electricity inverter reporting system.
View 1 Replies View RelatedI use both Gigabit LAN and "N" class WIFI through my WNDR3700 to connect to my Network. Can I use a Verizon MIFI4510L to connect to the Internet?
View 1 Replies View Relatedmy wireless connection (netgear 79) fluctuates often from 5 bar signal dropping to 1 - computer repairman suggested programming an extender into router...my computer is only 8 ft. from router in another room...would a second router do better and/or easier to implement
View 1 Replies View RelatedCan I use netgear WGR 614 as range extender of another wireless router?I already using a model with wireless router, i have a spare netgear WGR 614. I want this router to pick up wireless signal from the first wireless router then share the internet on ethernet port only.
View 4 Replies View Relatedbuying a wireless router to use as a wifi extender as the signal is weak upstairs. At the moment my pc upstairs is connected by ethernet cable, I'm thinking of connecting a router upstairs to this ethernet cable to have good wifi upstairs. And my pc does have wifi so I will use that.
View 1 Replies View RelatedI have a Netgear N300 and am using a linksys wrtg54g flashed with dd-wrt as an extender. I would like to setup my wireless network to limit various devices (laptops, iPod touch, etc) to certain times of the day.
How do I configure both devices to limit connectivity? I've got it down pretty much on the NetGear using a MAC address filter and scheduling the services, but I am not sure how to get the extender to do the same.
Familiar with the WNDR3400 but I purchased it when it first came out only to replace it with my E4200. The WNDR3400 has a "wireless repeater function" and I was wondering if it was in any way compaitable witht he E4200 or does it have to be directly connected to use it as an accesspoint/range extender ?
View 4 Replies View RelatedI have basically the following setup: It's a home network, running with a Netgear WNDR3700 wireless router.
Wireless Devices on the Network:
Google Nexus One: 802.11 b/g/n
iPhone (Original): 802.11 b/g
Main Workstation Laptop: 802.11 a/b/g
"Beater/Other" Laptop: 802.11g b/g
Ethernetted devices on the network:
Logitech Revue: CAT-5e
I'm running both the 2.4 GHz and the 5.0 GHz networks over the same SSID. The goal, obviously, is to get everything over to N if possible. I've heard that wireless N has much better signal and transfer rates, is this true? Also, is running the two different frequencies with the same SSID problematic? It's kind of strange, because my Nexus One is having a difficult time staying connected to the network in my office while the main workstation laptop in the same room is getting a much better signal.
[Code]....
What's interesting is that both are running on the 2.4 GHz networks, essentially both not on the wireless n network, which kind of defeats the whole purpose of things. Is it bad to run both the 2.4 and 5.0 GHz networks with the same SSID? If using a network repeater, is it bad to rebroadcast the original network with the same SSID as the source network? It seems that the 5.0 GHz network is getting "clobbered" by the 2.4 GHz network. Is it really necessary for me to broadcast using different SSIDs?
I recently purchased a wireless extender to use on my PC, PS3, and kindle since I have such a low signal in my bedroom. I connected the extender to the PS3 and kindle with no problems. Great signal. Increased from 1 bar to 3 bars. However I can't connect either one of my PCs to it. It connects but says no internet access.
View 9 Replies View RelatedADSL Box in office ground floor - Range extender in 1st floor lounge - portable Win7 64 in dining room next to lounge (1st floor) Setup proceeds and completes as it should but the problem: The portable connects to the new link *_EXT but with "no access" (the extender is not connecting to the router). Having read several reviews about connection problems with this kit, none seem to have the problem I have.
View 10 Replies View RelatedThe router I'm connecting it with is a bright house RCA dwg855t. I go through the setup and the net gear device isn't receiving an IP address from the router.
View 1 Replies View RelatedHow do I change the username and password on my home wi-fi extender (Netgear). I can't remember my original username and password and it will not let me use the extender until I put it in.
View 3 Replies View RelatedI bought a Netgear WN3000RP Extender for better wifi range, because on my room upstairs I have no signal at all (so called dead spots) So, I installed it a few months ago and all was working fine, untill we had to leave the house for vancation. Someone in the house pulled the extender out of the electric outlet. A few weeks later we pulled it back in it, but here started the problem: I installed the extender again, but now without any succes. (Just incase you want take a look: [URL]
There are 4 LED lights attached to this extender. 3 of them are lighting, but the 4th won't light at all. LED's: [URL]
I did the exact same procedures as exampled in the installation manual, but nothing worked. I always got this error on the end of the unsuccesful installation: Move the extender closer to the existing router or gateway.
Im really sure the extender is in the range of my actual router!
I've tried everything from restoring to factory defaults to WPS, DPS, disabling security, Nothing works.. I always get stuck on the error. (With WPS I press both the buttons on the extender and the router, but they cant find each other.)
I purchased the latest range extender, but the password was not logged, so we cannot use the NetGear extender shown in the wireless network list.
View 3 Replies View Relatedconnect my new device and get it working as an extender?
View 2 Replies View RelatedI'm running Windows Vista on PC. Have a Netgear router. Just bought Netgear range extender WN3000RP. Have the extender plugged in and light is green. When I try my PC's wireless network manager, it does not recognize any wireless devices to add. How can I connect to the extender wireless network when it is not recognized on my wireless manager??
View 1 Replies View RelatedI just installed a Netgear WiFi extender. In order to set all the preferences, it wants a password and login and I have no idea what that is. I tried everything I could think of, but no go. how to reset the pw and figure out what my login is? Have had no response that addresses this problem. I am using Win 7 and I have an ARRIS cable modem. I've already gone thru the users guide with a fine tooth comb and have found nothing. I have been using WiFi on Netgear equipment for years, so it's not a new network. I also tried the login=admin and password=password and that didn't work.
View 3 Replies View RelatedI recently purchased this network range extender for my house. Upon going through the set up wizard the last step asked me to confirm that I could connect to the extender. After putting in the passphrase and clicking connect, it tells me that the passphrase is wrong. It is set to WEP 64bit (cannot change this) and uses the same information as my wireless network itself. I know im not entering an incorrect passphrase because it clearly shows me what the passphrase is at the end of the set up wizard. I looked for some troubleshooting from the Netgear website and in the manual but it just says that the extender is outside the network range, which is not true as ive moved it around to different spots and it gives me the same error.
View 2 Replies View RelatedI recently bought a Netgear WN2000RPT from Best Buy and I couldn't manage to get past the setup (wouldn't connect with my existing router), and I'm returning it tomorrow.
I just need to repeat the wireless-G signal downstairs to the other side of the house upstairs.What are your recommendations?
What Wifi Extender will work with a 2Wire 707 380 1HGV?
View 2 Replies View RelatedI have upgraded my MTN internet modum and now my netgear router MBRN3000 does not WORK I have forgot my username and password
View 1 Replies View Relatedjust bought a new router netgear WNR200v3 and it wont, have tried to reset several times and still nothing.
View 1 Replies View RelatedI have a WN3000RP WiFi Range Extender but I cannot seem to find out how to connect to it on my Windows 7 Desktop computer to configure it. My Router is a Netgear Wireless G RouterWGR614 v9
View 7 Replies View Relatedi cant get my netgear to work on my gateway can you
View 1 Replies View RelatedI need to replace my Netgear WGR614 v6 router which is a good 4 or 5 years old, and i think is the cause of a very slow internet connection. Download speeds are reaching 1.1mb/s but browsing on the internet is unbelievably slow and fails to load pages most of the time saying the DNS look-up failed. I was thinking of purchasing the Buffalo Wireless-N300 Cable Router. I'm with Virgin Media, i think on 10meg broadband. I think it will support moving from wireless G to wireless N, but my laptop is fairly old too - Fujitsu Siemens Lifebook C series.
View 10 Replies View RelatedI replaced a Netgear router with a similar Netgear router, but the LAN is no longer working.The old Netgear router would drop internet, but LAN would work. Replaced it, the new Netgear router works fine with the internet (cable modem), but the LAN with two computers will not work. The desktop with Windows XP, and a laptop with Windows 7. After runing network setups on both computers several times, I have been unable to reestablish the LAN, however internet access via the router is working. Reinstalled the old router and the LAN works fine, allowing file and printer sharing. Old router is a Netgear WGR614v2, new router is a Netgear WNR2000how to reconfigure the router/computers to get the LAN working again with new router.
View 8 Replies View RelatedI got new internet last Thursday. It is fiber optic through VTX1. I am running windows 7. I can connect to the internet just fine directly but when I try the netgear it tells me No Internet Connection. When I go through the setup process it tells me No Ethernet Cable is Plugged Into The Router Internet Port. When I hook up my very old Cisco router the internet and Wi-fi work just fine. I have updated the drivers and have windows firewall off. This is it plugged directly in:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersKellan>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kellan-PC
Primary Dns Suffix . . . . . . . :
[code]....
I have just purchased a Netgear WN3000RP wireless extender.The security setting on all devices on the existing network show as WPA2-PSK wireless n but the extender comes up as WPA-PSK wireless g although the instructions say it will copy existing security settings.There is supposed to be a Netgear website to log on to an installation wizard but this doesn't work and appears not to have worked for some months.Why are Netgear still selling this device without an installation disc when they must know by now that their site doesn't work?Is there any way to alter the security setting of the extender?
View 10 Replies View Relatedi have netgearma101 will not work on window 7 it will work on 98 2000 xp
View 2 Replies View RelatedI have an old compaq running windows 98. I just bought a netgear n300 wireless usb adapter, knowing there might be compatibility issues.
View 2 Replies View Related