Netgear Ma101 Will Not Work On Windows 7?
Apr 1, 2012i have netgearma101 will not work on window 7 it will work on 98 2000 xp
View 2 Repliesi have netgearma101 will not work on window 7 it will work on 98 2000 xp
View 2 RepliesI am trying to connect to the internet using an external wireless device (Netgear model:MA101), I have managed to install the drivers and my wireless network is coming up as an option! For some bizarre reason when I try and connect the following messages appears: "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try again"I then refresh and try to connect but the message constantly appears I have rebooted my computer in case it needs to reset after installing the driver for the wireless device.
View 2 Replies View RelatedI have an old compaq running windows 98. I just bought a netgear n300 wireless usb adapter, knowing there might be compatibility issues.
View 2 Replies View RelatedI have upgraded my MTN internet modum and now my netgear router MBRN3000 does not WORK I have forgot my username and password
View 1 Replies View Relatedjust bought a new router netgear WNR200v3 and it wont, have tried to reset several times and still nothing.
View 1 Replies View RelatedI cannot get my computer to recognize my Netgear WNR1000. I have called Netgear to explain the issue and was on the phone with them for 45 minutes.They did get the laptop to work but my desktop still does not. They told me it was a browser error. If I disconnect the ethernet cable from the router to my computer everything works perfect.I tried to reinstall the CD that came with the router and as I try to get through step 2 it says no router detected.I think this is my hold up but I have no way to know how to fix this. I tried to go on the Netgear website and they tell me that I have to be able to connect to the internet to download through the router. Well I can't do that because obviously that is the hangup. If I click on my Network Connections. It shows my computer connected to a Network with limited capability and then a big red X going to the internet.
View 3 Replies View RelatedIf I use a Verizon 2200 WIFI as my ISP, how can I use my Netgear WPN824 connected to my desktop, and then eliminate the need for a USB-WIFI dongle for the desktop?
View 2 Replies View RelatedI recently bought a Netgear WNDR4000 router. The wired network is working fine, but the wireless network is giving me problems I don't understand.
I am using the following equipment to connect to the wireless network:
- Samsung Galaxy S2 mobilefoon (supports N speeds)
- Asus laptop (supports G speeds)
With both devices I want to connect to the 2.4 Ghz (b/g/n) wireless network with the following settings:
- Channel: auto
- Speed: 145 Mps max.
- Security: WPA2-PSK [AES]
- Preamble modus: long
- Fragmentation length: 2346
- CTS/RTS: 2347
Latest firmware has been installed.
Here is what happens:
- When resetting the router to factory settings I can connect with both devices mentioned (security is not enabled)
- When setting the WPA2 security key for the first time, I can connect with both devices.
- When I try to connect with either device for the second time I cannot connect, messages (from mobile phone):
The nework SSID is visible Trying to connect Connection broken Network remembered
And then a loop is present that keeps trying to connect, but almost never succeeds. Maybe once in a hundred attempts. When a connection is made, it works fine for as long as the connections stays present. After the connection is broken, it all starts over again. The 5 Ghz network is behaving exactly the same (only tested with my mobile phone, laptop doesn't support 5Ghz network).
I have lowered the speeds and tried different channels, but behavior stays the same.
i cant get my netgear to work on my gateway can you
View 1 Replies View RelatedI need to replace my Netgear WGR614 v6 router which is a good 4 or 5 years old, and i think is the cause of a very slow internet connection. Download speeds are reaching 1.1mb/s but browsing on the internet is unbelievably slow and fails to load pages most of the time saying the DNS look-up failed. I was thinking of purchasing the Buffalo Wireless-N300 Cable Router. I'm with Virgin Media, i think on 10meg broadband. I think it will support moving from wireless G to wireless N, but my laptop is fairly old too - Fujitsu Siemens Lifebook C series.
View 10 Replies View RelatedI have a Netgear wnr2000 v3 wirless router. Im trying to get the Verizon Samsung Network extender to work on it. I am using a ethernet cable not wireless. When i go into the Netgear's Control panel and click attached devices it does not show it and it wont work. I called verizon and they gave me port numbers to put it in the port fowarding but you need the IP address which i dont know
View 3 Replies View Relatedbasically, my iMac detects the extender as routername_EXT which is fine, but says that the password i type is wrong. when i use my original router with my iphone with the same password it works, but when i try to use it with my extender it says that the password is wrong.
View 1 Replies View RelatedI have a Netgear WRG614 and a Westell 610015 Modem. I need Port Forwarding. I have tried setting up a static IP then Port Forwarding but it doesn't work. I have tried port forwarding from the modem but it doesn't work. I wanna forward ports "80, 9958, and 5816". The reason is because I am gonna host a game server on my computer.
View 14 Replies View RelatedI replaced a Netgear router with a similar Netgear router, but the LAN is no longer working.The old Netgear router would drop internet, but LAN would work. Replaced it, the new Netgear router works fine with the internet (cable modem), but the LAN with two computers will not work. The desktop with Windows XP, and a laptop with Windows 7. After runing network setups on both computers several times, I have been unable to reestablish the LAN, however internet access via the router is working. Reinstalled the old router and the LAN works fine, allowing file and printer sharing. Old router is a Netgear WGR614v2, new router is a Netgear WNR2000how to reconfigure the router/computers to get the LAN working again with new router.
View 8 Replies View RelatedI got new internet last Thursday. It is fiber optic through VTX1. I am running windows 7. I can connect to the internet just fine directly but when I try the netgear it tells me No Internet Connection. When I go through the setup process it tells me No Ethernet Cable is Plugged Into The Router Internet Port. When I hook up my very old Cisco router the internet and Wi-fi work just fine. I have updated the drivers and have windows firewall off. This is it plugged directly in:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersKellan>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kellan-PC
Primary Dns Suffix . . . . . . . :
[code]....
I am trying to set up a custom service on my netgear configuration page. I have a netgear router model# Wnr834m. every time i click the "add custom service" button the page redirects to "system authentication failed" and logs me out. What can i do to set up the new port?
View 1 Replies View RelatedI have a Netgear Duo RND2110 that I have installed in the system. One of the computers (Windows 7 Home Premium 64bit) will not allow me to access the Duo. I get the following message:-\192.168.?.?? is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you access permission. Login failure: accour currently disabled.
View 1 Replies View RelatedI have a windows xp pc that is running as a server that is networked with a windows 7 pc. Both are connected through a switch. Here is the diagram.
Both Pc's--->Switch--->Wired Router--->Wireless router/modem--->Phone line box.
I am running embarq high speed internet. I also have a network printer that follows the route as the pc's but has its own port.I used to have the 2 pc's networked to share a folder on the xp machine. Came in one day, and now the shared folder cannot be located by the Windows 7 machine. I have tried to run setup wizard for network over and over and cannot get any results. I can map the drive on the xp machine but it doesnt show up on the 7 machine, or I am just not able to locate it under my computers.
My computer has today 3x2 TB WD Green disks and thay are really slowing my system down so now I need to move them to somekind of NAS.I was first lookin at the "Synology Disk Station DS411j" but then I found that I got some old hardware laying around (AMD 3200+ CPU, 1 GB ram,XFX GeForce 7600GT, Seasonic SS-300FT in a Thermaltake Xaser II chassi). So now I got some questions :
1. I was looking into running FreeNas on my NAS but if the NAS is crashing then it will be alot of work to get the data back? Is it right that its not possible to just mount a drive from the FreeNas in to my Windows7 computer and read the data?
2. If I install Windows 2008(not r2 that demands 64bits CPU) and then uses dynamic volums to get one big volume, what will happen if this Windows2008 craches? will it be able to place one of the disks in my windows7 computer and reda the data?
3. What happens if one disk i a dynamicvolume craches? will all data be lost?
4. Is there any sleepmode in Windows2008? If would be nice if the computer shutsdown at night and startsup when it is about to be used.
5. Will a finished product like the "Synology Disk Station DS411j" demand less power? Will I earn anything to buy the DS411j instead of my old hardware if we look on the economics?
I am running windows vista on my HP laptop (not sure what kind of laptop it is it just says HP on it) it wil no longer connect to my wireless NETGEAR WNR2000v3 and when I do get it, its local only. I recently had virus infections removed from someone who used AVIRA and MBAM (malaware anti bytes)
edit I tried to disable the autoscaling feature in windows and it did not work /I am running windows vista home 32bit/I can connect to the router now I had the wrong security type selected WPA instead of WPA2, but it still reports local only, I checked my router logs and it shows that it connects but it does not give me information on if it is blocking the laptop from the internet or if my laptop is. I have tried turning off the windows firewall and resetting it as well now.
I have tried the things listed below
- uninstall and reinstall windows wireless adapter drivers through computer managment
- disablied IPv6 through wirless adapter properties (unchecking the box)
- reset my rounter entirely (after which I can no longer connect to the router at all, where as before I did this I was able to connect to my router but it was local only) held the reset button for 10 or more seconds plus unplugged my modem and router for 5 mins, I know its alot of time for that but I was eating but regardless, after which I turned on my modem let all the lights go through their setup then I turned on the router let all the lights do their thing, and then my laptop to make sure everything picked up new settings.
-something threw me off also under computer managment under the network adapters there were ipv6 to ipv4 "tunnels" or something, they had the yellow warning sign on it.
i load windows 7 onto it and try to get into internet explorer to get google chrome and it says that i need to configure a network so i try and configure one but it says that no networks are connected to it.i had vista on it before windows 7(still couldn't connect)and it said that it was a realtak router but underneath the router it says that it's netgear i don't know which one it is.i have gotten into the router using its ip.also the model for the netgear part is b90-755044-15 it work just fine for this computer although it's on windows XP do i need a driver for the mother board,router,or what.
View 2 Replies View RelatedMy son just got an Asus Laptop from his school. It is running Windows 8.It connects to other peoples WIFI, just not my home WIFI.When he got it home he found the network, entered the password and nothing happened. Now it can't even find the network.There is nothing wrong with the router as every other device connects fine.The router is a Netgear n600 - DGND3700?
View 3 Replies View RelatedWe have three desktops...2 Macs and a windows vista...my brother has a windows vista laptop, my mum has a Macbook laptop and for Christmas I got a windows 7 laptop! But that's not all that relevant because all I am really interested in is setting up file sharing between my old vista desktop and my new windows 7 laptop, so I can transfer my music, etc across. (I know that I could easily do this by other methods but I want filesharing set up for the future).Both computers are wirelessly connected to a Netgear router.Initially i tried fiddling around with various network settings and I've managed to get the two computers to recognise each other...and they can access the 'public' folder. I tried fiddling with advanced sharing to let them access other folders which appear as shared folders, but when i tried to access them from the other computer i was denied access.
View 1 Replies View RelatedAs we all know, MS has changed the default workgroup names in different versions of windows. Additionally, you can rename your workgroup anything you like. I have XP, Vista, and Win7 computers, a television, BluRay player, a Wii, two printers, and a NAS with two USB drives attached. All of these -except the Win7- are wired to one of two switches. I have wireless: iPad, the Win7 notebook, Nintendo DSs. I have friend, and non-friend machines (computers, tablets, and phones) that come and go that are wired or wireless. The 3 windows computers all have the same workgroup name. All of my other units do not use workgroup names. I have a router, and two unmanaged switches, and have, on occasion, a second router. The main router, which has wired, and dual band wireless (each with two named wireless networks) nets, sees everything, by name and/or MAC address. Win7 is blind, deaf, and dumb.: it shows its own workgroup name, but no other workgroup name(s) , and, consequently, no unit on these other workgroups. It will show some wired units not in a workgroups - the television, and the printers (not the Wii or NAS). It will not show the wired XP computer! No wireless units either in workgroups or not in workgroups appear. Additionally, Win7 only shows units on its wireless network, not on the other three. The wired units it does show are not on any of the wireless networks, though it lists them on its wireless network.I have left the Homegroup, and terminated the Homegroup services. I have allowed discovery, and unlimited sharing of everything on every computer on the router, and yet the Win7 unit does not share or see well at all.Why?
View 2 Replies View RelatedI have this USB Wifi adapter: NETGEAR WNA3100 [URL] I just bought it and thought it would work, but apparently it is def a Windows 7 problem because I have tried it with these others USB adapters only. My main objective is to create a hotspot for the house wirefree and no triping etc etc
Airlink+ 802.11g 2.0 (old) Works with XP but not on W7 (blinks)
WifiMAX Dongle 802.11g 2.0 (also old) (Sometimes blinks at intervals)
TrendNET TEW-644UB (bought last year) (Light stays on/no longer blinks)
Netgear WNA3100 (arrived just a few hours ago) (I made it blink now with its software)
I have tried(netgear):
-rebooting
-installing/uninstalling drivers
-uninstalling itunes
-Using a W8 procedure for it
-tried using different software
-Some other stuff
I have not tried a HKEY codes for it My biggest problem is that the "Disabled" status is stuck and I cannot re-enable it. If there is a way to override this I would be happy to hear it. Using: Windows7 Ultimate Gigabyte Motherboard/AMD chipset For the only one that is enabled(Airlink) it has some funny stuff on the status like 412 Gbps and doesn't have ipv4/6 connectivity [URL]
I have two disk tops I want to network to the internet. Does any one know of a "Wired Router" that will work with Windows Seven and XP?
View 2 Replies View RelatedI trying to find out if I use my wrt160n v3 within a win7 environment?
View 1 Replies View Relatedhow do i get a cricket modem to work on windows 7?
View 1 Replies View Related[URL]
I have the version 3xxx adapter yet I can't get it to work at all.
I've tried letting windows see it, manually pick drivers from the file I download, that doesn't work. I've tried using the installer and that only makes things worse. IT SAYS IT SUPPORTS 64bit 7!
I have a WUSB11 v2.8 laying around but that is even worse looking 64bit driver wise.
What I need is a net gear n300 wireless usb adapter driver that works for linux, windows 98, windows 982nd edition and windows xp because i'm switching this computer to windows xp and i need a solid internet connection throughout the entire process or a way to switch my computer to windows xp with out the internet conection like a download of the windows xp instalation file.
View 2 Replies View RelatedThis is an older desktop, Been utilizing the net gear to get on the Internet for months and it was working fine,shows it is connected to ssid but ip shows up as 0.0.0.0 I have other home computers hooked up and work g so I located there ip address, can I input it myself ? If so how?
View 2 Replies View Relatedmy dell notebook that has windows 7 starter keeps losing internet connection and saying no connection available but my home computer still has the internet connection. I have a Netgear router and my home service is through comcast.
View 3 Replies View RelatedI am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:
- When connecting via wi-fi everything is fine
- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity
- When enabling my LAN and disabling wi-fi lose all internet connectivity
Here is my IP Config when both are enabled :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig
Windows IP Configuration[code].....