Get A Cricket Modem To Work On Windows 7?
Jun 11, 2011how do i get a cricket modem to work on windows 7?
View 1 Replies
ADVERTISEMENT
Hook Up Xbox To The Internet If Using A Cricket Modem?
Feb 25, 2011I have a laptop and an xbox I have done everything the vides on the internet have told me to do to hook up to xbox live I have hooked an ethernet cable to my laptop and to the xbox and did the whole network sharing thing but when I test the connection on the xbox it says there is a problem with the connection
View 1 Replies View RelatedCricket Modem Connects To Internet But Can't Load Webpages
Mar 3, 2011I recently bought a starcom modem from cricket. I installed it and it shows That I'm connected, but my Internet explorer won't open web pages.
View 5 Replies View RelatedWhy Router Work With DSL Modem But Not Cable Modem
Jan 6, 2013I'm switching to cable internet service instead of DSL. My Netgear router will not work with my cable modem; but it works like a charm with my DSL modem. Is it a problem with the router setup? Good thing I still have the DSL service.
View 3 Replies View RelatedRouters / Switches :: Can't Connect To Cricket Cross Wave
Dec 20, 2012Can not connect to Cricket wave
View 1 Replies View RelatedShare Cricket Broadband Connection With Other Computers Via Wifi
Mar 5, 2013How do I share Cricket Broadband connection with other computers via wifi?
View 2 Replies View RelatedUse Wireless Router To Pick Up Internet Signals Using Cricket Broadband Connection?
Jul 19, 2011Is it possible to use a wireless router to pick up internet signals using a cricket broadband connection
View 1 Replies View RelatedModem Won't Work Without Router
Jan 23, 2013i tried to plug my PC with an ether net cable directly to the modem (I turned off the router and only the 1 PC is plugged into the modem) and it does not work.
View 12 Replies View RelatedWill Cable Modem Work For DSL Internet?
Feb 2, 2011I have DSL setup in my house and I want to know if using a cable modem will work and increase my speed. And will it work with a linksys router
View 1 Replies View RelatedRouter And Modem Does Not Work Together In Vista?
Feb 6, 2013Is this a wired or wireless connection issue?How to run and post an ipconfig /all output of the computer(s) in question for review.
Who is your Internet Service Provider (ISP)? India - BSNL
What type of Broadband connection are you using? ADSL
What is the exact Make and Model of your Modem, Router or Modem/Router Combo - Linksys, D-Link, Netgear, TP-LINK, etc. TeraCom Type 1
What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic computer - McAfee, Norton, Eset, Webroot, Zone Alarm, etc.Microsoft essentials.
Modem model Type 1 (TeraCom)
I also have CompUSA Wirelesss Broadband Router, which I am trying to use and make a wireless set up to connect the following devices
1. A Laptop with Windows Vista Home Premium SP2
2. A Laptop with Windows XP SP2
3. An Android 2.3 Mobile phone
I can directly connect the wire from modem to laptop and browse internet - it works. But that is not a wireless network. It proves that BSNL modem alone works.make this network Wireless by using the CompUSA wireless router.
1. The connection set up is as follows:
BSNL TeraCom Modem (LAN 1) ----- wired connection ----- COMPUSA Router (WAN)...... Wireless ....... laptop
2. I can connect to the wireless router by typing 192.168.2.1 in internet browser.Here are the details of wireless router settings
WAN>PPPoE
Use PPPoE Authentication
User Name : ************* (intentionally masking in this forum)
Password : ************* (intentionally masking in this forum)[code].....
Internet Won't Work Through A Modem But With A Router
Apr 22, 2011I have asked this question to an internet service provider and 2 different techs at two differnt computer stores and no one has an answer for me. What is happening is just a few computers you plug them into dsl just through the modem the phone company uses and you cannont get on the internet, you get no internet connection, But you plug the same computer into a router that is connected even to the same modem to get the dsl and it will work right away. Now I understand that the router acts as a dhcp server and the computer is getting its ip address from it, but why won't it pick up one from the modem without the router? When this happens and it is not very often you can use the same modem with the same cabling and plug in another computer and it will get online right away so it is not the modem that is bad and not the cabling.
We had this problem about a year ago with like 5 computers. would not get on dsl, online through the telephone companies modem how ever you would use the same modem and plug it into a router and you could get online right away. At that time the telephone company had a real old DHCP server and the date and time and everything was wrong on it I suppose the battery was bad but they did away with it and use a differnt one going through Netins internet service provider. At that time before they did away with the dhcp server I had called netins and told them the problem they didn't no what was wrong and like I said I spoke with two other techs from two other computer stores and they had never heard of the problem, well now he is having the same problem with two laptops, I was just there today and saw they couldn't get online but you could plug another laptop into the same modem and it would get online with no problem, I took the laptop home and hooked it through my router and it got online right away. So I told him I tnought it was something with there dhcp server that the laptop wasn't getting an ip address from it but then why would another laptop getting plugged into the same modem in a few min get right online.
Does The Router Have To Be Hardwired To Modem To Work
Nov 24, 2011does my router have to be hardwired into my modem in order for my router/ computer setup which is located one room over from the cable modem
View 1 Replies View RelatedHow To Manage Internet Lan Cable And Usb Modem To Work Together
Oct 19, 2011how to manage internet lan cable and usb modem to work together?usb for mail and browsing ane lan for downloading i used win7,laptop
View 6 Replies View RelatedComcast Netgear WNR1000 Modem Won't Work
May 25, 2011I cannot get my computer to recognize my Netgear WNR1000. I have called Netgear to explain the issue and was on the phone with them for 45 minutes.They did get the laptop to work but my desktop still does not. They told me it was a browser error. If I disconnect the ethernet cable from the router to my computer everything works perfect.I tried to reinstall the CD that came with the router and as I try to get through step 2 it says no router detected.I think this is my hold up but I have no way to know how to fix this. I tried to go on the Netgear website and they tell me that I have to be able to connect to the internet to download through the router. Well I can't do that because obviously that is the hangup. If I click on my Network Connections. It shows my computer connected to a Network with limited capability and then a big red X going to the internet.
View 3 Replies View RelatedConnect From Wire Modem But It Doesn't Work
Oct 29, 2012I just got an used Pc from auction today.I installed it with Xp Pro. I am trying to connect it to my wire modem but it doesn't work.
View 4 Replies View RelatedAtt Westell Modem Won't Work With Linksys WRT54G
Jun 9, 2011When I hook up the Westell modem to my Linksys router WRT54G it wont work?
View 1 Replies View RelatedLevelOne WBR 6002 - Charter Modem Won't Work With Router?
Nov 29, 2012So about a month ago I made the switch from AT&T to Charter and had a ton of problems those first 2 days getting it running, then after that it was running just fine until today.Last night it randomly stopped working, but I didn't want to fix it at the time(to tired).
It seems like when the modem does a restart it won't work with my router unless I disconnect all the ethernet cords going out of the router except the one going to the modem. And once I verify a connection(router has a light) I can connect the other ethernet cords and everything will function just right.So I fixed it this morning and about 30 minutes later it stopped working again. I don't know what's causing it to stop working, it seems like the modem is resetting and then I have to do what I described above. And then after that it shortened to about 5 minutes later.
My router is the LevelOne WBR-6002.
The modem is a Cisco DPC3008.Here's the Cisco page:
Quote:
Model: Cisco DPC3008
Vendor: Cisco
Hardware Revision: 1.0
MAC Address: 7c:b2:1b:95:32:fe
Bootloader Revision: 2.3.1_R3[code]....
Cisco Infrastructure :: 3825 Gi0/0 Interface Does Not Work With Modem
Mar 7, 2012We have a Cisco 3825 router which does not work well with a DSL modem(ISP provided). I have configured the Gi0/0 port of the router to plug into this DSL modem but it does not ping to the ISP gateway. If we do a shut/no shut on the interface then it work fine for about 30 secs. Sometimes even for 1 hr. Then the packets drop and we cannot pass any traffic through this interface.Now, if the ISP connection is terminated on a computer it works fine. It works fine without dropping any packet. I have tried various options like using a straight/cross cable. I have tried to configure the interface negotiation for 100/full, 100/half, auto/auto and almost all the options. I have also tried to interconnect the devices using a L2 device like a HUB. Nothing works.
View 7 Replies View RelatedNetgear WRG614 - Port Forwarding From Modem But It Doesn't Work
Feb 26, 2011I have a Netgear WRG614 and a Westell 610015 Modem. I need Port Forwarding. I have tried setting up a static IP then Port Forwarding but it doesn't work. I have tried port forwarding from the modem but it doesn't work. I wanna forward ports "80, 9958, and 5816". The reason is because I am gonna host a game server on my computer.
View 14 Replies View RelatedLinksys Wireless Router :: New Modem Doesn't Work With E2000?
Nov 7, 2012I just received a new modem from my ISP acanac, the modem model is NetVito5300.When I connect the modem directly to my computer, I can access the internet, but if I connect through my wireless router, there's no wireless internet access. Wireless router model is CISCO Linksys E2000.I tried to download Cisco Connect Setup Software for PC and followed the step until one point it asked for my wireless username and password and I put them in correctly but it said my router was not successfully set up and failed. I should press the reset button and set the router to factory default mode, but I'm afraid I won't be able to set it up properly after doing so.What should I do to connect my new modem and wireless router properly so I have wireless internet access?
View 6 Replies View RelatedDell :: 1012 Get PIN Code To Unlock Modem With Ability To Work With Other Operators
Feb 27, 2012My laptop DELL 1012 is attached to the operator AT & T, which in Russia is not working. I'd like to get a PIN code to unlock the modem with the ability to work with other operators. How I can do it? [code]
View 1 Replies View RelatedXp And Windows 7 Network Won't Work
Nov 28, 2011I have a windows xp pc that is running as a server that is networked with a windows 7 pc. Both are connected through a switch. Here is the diagram.
Both Pc's--->Switch--->Wired Router--->Wireless router/modem--->Phone line box.
I am running embarq high speed internet. I also have a network printer that follows the route as the pc's but has its own port.I used to have the 2 pc's networked to share a folder on the xp machine. Came in one day, and now the shared folder cannot be located by the Windows 7 machine. I have tried to run setup wizard for network over and over and cannot get any results. I can map the drive on the xp machine but it doesnt show up on the 7 machine, or I am just not able to locate it under my computers.
Could Windows 2008 Work As A NAS
Jan 13, 2012My computer has today 3x2 TB WD Green disks and thay are really slowing my system down so now I need to move them to somekind of NAS.I was first lookin at the "Synology Disk Station DS411j" but then I found that I got some old hardware laying around (AMD 3200+ CPU, 1 GB ram,XFX GeForce 7600GT, Seasonic SS-300FT in a Thermaltake Xaser II chassi). So now I got some questions :
1. I was looking into running FreeNas on my NAS but if the NAS is crashing then it will be alot of work to get the data back? Is it right that its not possible to just mount a drive from the FreeNas in to my Windows7 computer and read the data?
2. If I install Windows 2008(not r2 that demands 64bits CPU) and then uses dynamic volums to get one big volume, what will happen if this Windows2008 craches? will it be able to place one of the disks in my windows7 computer and reda the data?
3. What happens if one disk i a dynamicvolume craches? will all data be lost?
4. Is there any sleepmode in Windows2008? If would be nice if the computer shutsdown at night and startsup when it is about to be used.
5. Will a finished product like the "Synology Disk Station DS411j" demand less power? Will I earn anything to buy the DS411j instead of my old hardware if we look on the economics?
N300 ADSL2+ Modem Router DGN2200v3 - Wired Connection Doesn't Work / Wireless Does
Mar 11, 2013I tried restarting the router and the computer, but to no avail. I've also tried with another ethernet cable and tried several ports, but that did not work, either. What is interesting is that other computers in the household connect to the router via wire without problems. I suppose that means something's wrong with my computer, however, I do not know what. I have a netgear router which says "N300 Wireless ADSL2+ Modem Router DGN2200v3" on the back. My computer has Windows 7 Home Premium installed. I'm using a DSL connection, and Avast! antivirus.
View 7 Replies View RelatedCan't See Multiple Work-groups In Windows 7
Oct 24, 2011As we all know, MS has changed the default workgroup names in different versions of windows. Additionally, you can rename your workgroup anything you like. I have XP, Vista, and Win7 computers, a television, BluRay player, a Wii, two printers, and a NAS with two USB drives attached. All of these -except the Win7- are wired to one of two switches. I have wireless: iPad, the Win7 notebook, Nintendo DSs. I have friend, and non-friend machines (computers, tablets, and phones) that come and go that are wired or wireless. The 3 windows computers all have the same workgroup name. All of my other units do not use workgroup names. I have a router, and two unmanaged switches, and have, on occasion, a second router. The main router, which has wired, and dual band wireless (each with two named wireless networks) nets, sees everything, by name and/or MAC address. Win7 is blind, deaf, and dumb.: it shows its own workgroup name, but no other workgroup name(s) , and, consequently, no unit on these other workgroups. It will show some wired units not in a workgroups - the television, and the printers (not the Wii or NAS). It will not show the wired XP computer! No wireless units either in workgroups or not in workgroups appear. Additionally, Win7 only shows units on its wireless network, not on the other three. The wired units it does show are not on any of the wireless networks, though it lists them on its wireless network.I have left the Homegroup, and terminated the Homegroup services. I have allowed discovery, and unlimited sharing of everything on every computer on the router, and yet the Win7 unit does not share or see well at all.Why?
View 2 Replies View RelatedWifi Usb Adapter Won't Work On Windows 7
Dec 5, 2012I have this USB Wifi adapter: NETGEAR WNA3100 [URL] I just bought it and thought it would work, but apparently it is def a Windows 7 problem because I have tried it with these others USB adapters only. My main objective is to create a hotspot for the house wirefree and no triping etc etc
Airlink+ 802.11g 2.0 (old) Works with XP but not on W7 (blinks)
WifiMAX Dongle 802.11g 2.0 (also old) (Sometimes blinks at intervals)
TrendNET TEW-644UB (bought last year) (Light stays on/no longer blinks)
Netgear WNA3100 (arrived just a few hours ago) (I made it blink now with its software)
I have tried(netgear):
-rebooting
-installing/uninstalling drivers
-uninstalling itunes
-Using a W8 procedure for it
-tried using different software
-Some other stuff
I have not tried a HKEY codes for it My biggest problem is that the "Disabled" status is stuck and I cannot re-enable it. If there is a way to override this I would be happy to hear it. Using: Windows7 Ultimate Gigabyte Motherboard/AMD chipset For the only one that is enabled(Airlink) it has some funny stuff on the status like 412 Gbps and doesn't have ipv4/6 connectivity [URL]
Wired Router That Will Work With Windows 7 And XP?
Aug 21, 2011I have two disk tops I want to network to the internet. Does any one know of a "Wired Router" that will work with Windows Seven and XP?
View 2 Replies View RelatedCan Linksys Wrt160n V3 Work In Windows 7
Aug 2, 2012I trying to find out if I use my wrt160n v3 within a win7 environment?
View 1 Replies View RelatedNetgear Ma101 Will Not Work On Windows 7?
Apr 1, 2012i have netgearma101 will not work on window 7 it will work on 98 2000 xp
View 2 Replies View RelatedGet A Netgear N300 To Work With Windows 98?
Jun 26, 2011I have an old compaq running windows 98. I just bought a netgear n300 wireless usb adapter, knowing there might be compatibility issues.
View 2 Replies View RelatedGetting Belkin F5D7050 To Work On Windows 7 64
Mar 13, 2011[URL]
I have the version 3xxx adapter yet I can't get it to work at all.
I've tried letting windows see it, manually pick drivers from the file I download, that doesn't work. I've tried using the installer and that only makes things worse. IT SAYS IT SUPPORTS 64bit 7!
I have a WUSB11 v2.8 laying around but that is even worse looking 64bit driver wise.
Windows Xp Internet Intermittently Stops Work
Mar 2, 2011Internal network (LAN) works OK rock solid; only internet drops intermittently windows xp sp3 with latest updates wired connection
View 2 Replies View RelatedThe Wireless Connection Doesn't Work In Windows 7?
Mar 25, 2011I installed a Micro Edition of Windows 7. Everything is going properly with it except the wireless internet connection (its driver is installed and working properly as shown in Device Manager), by click Connect and typing the PW, it tries for few minutes then fail in connecting putting a yellow small circle on the wireless icon in Task bar
View 1 Replies View Related