Modem Won't Work Without Router
Jan 23, 2013i tried to plug my PC with an ether net cable directly to the modem (I turned off the router and only the 1 PC is plugged into the modem) and it does not work.
View 12 Replies
ADVERTISEMENT
Why Router Work With DSL Modem But Not Cable Modem
Jan 6, 2013I'm switching to cable internet service instead of DSL. My Netgear router will not work with my cable modem; but it works like a charm with my DSL modem. Is it a problem with the router setup? Good thing I still have the DSL service.
View 3 Replies View RelatedRouter And Modem Does Not Work Together In Vista?
Feb 6, 2013Is this a wired or wireless connection issue?How to run and post an ipconfig /all output of the computer(s) in question for review.
Who is your Internet Service Provider (ISP)? India - BSNL
What type of Broadband connection are you using? ADSL
What is the exact Make and Model of your Modem, Router or Modem/Router Combo - Linksys, D-Link, Netgear, TP-LINK, etc. TeraCom Type 1
What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic computer - McAfee, Norton, Eset, Webroot, Zone Alarm, etc.Microsoft essentials.
Modem model Type 1 (TeraCom)
I also have CompUSA Wirelesss Broadband Router, which I am trying to use and make a wireless set up to connect the following devices
1. A Laptop with Windows Vista Home Premium SP2
2. A Laptop with Windows XP SP2
3. An Android 2.3 Mobile phone
I can directly connect the wire from modem to laptop and browse internet - it works. But that is not a wireless network. It proves that BSNL modem alone works.make this network Wireless by using the CompUSA wireless router.
1. The connection set up is as follows:
BSNL TeraCom Modem (LAN 1) ----- wired connection ----- COMPUSA Router (WAN)...... Wireless ....... laptop
2. I can connect to the wireless router by typing 192.168.2.1 in internet browser.Here are the details of wireless router settings
WAN>PPPoE
Use PPPoE Authentication
User Name : ************* (intentionally masking in this forum)
Password : ************* (intentionally masking in this forum)[code].....
Internet Won't Work Through A Modem But With A Router
Apr 22, 2011I have asked this question to an internet service provider and 2 different techs at two differnt computer stores and no one has an answer for me. What is happening is just a few computers you plug them into dsl just through the modem the phone company uses and you cannont get on the internet, you get no internet connection, But you plug the same computer into a router that is connected even to the same modem to get the dsl and it will work right away. Now I understand that the router acts as a dhcp server and the computer is getting its ip address from it, but why won't it pick up one from the modem without the router? When this happens and it is not very often you can use the same modem with the same cabling and plug in another computer and it will get online right away so it is not the modem that is bad and not the cabling.
We had this problem about a year ago with like 5 computers. would not get on dsl, online through the telephone companies modem how ever you would use the same modem and plug it into a router and you could get online right away. At that time the telephone company had a real old DHCP server and the date and time and everything was wrong on it I suppose the battery was bad but they did away with it and use a differnt one going through Netins internet service provider. At that time before they did away with the dhcp server I had called netins and told them the problem they didn't no what was wrong and like I said I spoke with two other techs from two other computer stores and they had never heard of the problem, well now he is having the same problem with two laptops, I was just there today and saw they couldn't get online but you could plug another laptop into the same modem and it would get online with no problem, I took the laptop home and hooked it through my router and it got online right away. So I told him I tnought it was something with there dhcp server that the laptop wasn't getting an ip address from it but then why would another laptop getting plugged into the same modem in a few min get right online.
Does The Router Have To Be Hardwired To Modem To Work
Nov 24, 2011does my router have to be hardwired into my modem in order for my router/ computer setup which is located one room over from the cable modem
View 1 Replies View RelatedLevelOne WBR 6002 - Charter Modem Won't Work With Router?
Nov 29, 2012So about a month ago I made the switch from AT&T to Charter and had a ton of problems those first 2 days getting it running, then after that it was running just fine until today.Last night it randomly stopped working, but I didn't want to fix it at the time(to tired).
It seems like when the modem does a restart it won't work with my router unless I disconnect all the ethernet cords going out of the router except the one going to the modem. And once I verify a connection(router has a light) I can connect the other ethernet cords and everything will function just right.So I fixed it this morning and about 30 minutes later it stopped working again. I don't know what's causing it to stop working, it seems like the modem is resetting and then I have to do what I described above. And then after that it shortened to about 5 minutes later.
My router is the LevelOne WBR-6002.
The modem is a Cisco DPC3008.Here's the Cisco page:
Quote:
Model: Cisco DPC3008
Vendor: Cisco
Hardware Revision: 1.0
MAC Address: 7c:b2:1b:95:32:fe
Bootloader Revision: 2.3.1_R3[code]....
Linksys Wireless Router :: New Modem Doesn't Work With E2000?
Nov 7, 2012I just received a new modem from my ISP acanac, the modem model is NetVito5300.When I connect the modem directly to my computer, I can access the internet, but if I connect through my wireless router, there's no wireless internet access. Wireless router model is CISCO Linksys E2000.I tried to download Cisco Connect Setup Software for PC and followed the step until one point it asked for my wireless username and password and I put them in correctly but it said my router was not successfully set up and failed. I should press the reset button and set the router to factory default mode, but I'm afraid I won't be able to set it up properly after doing so.What should I do to connect my new modem and wireless router properly so I have wireless internet access?
View 6 Replies View RelatedN300 ADSL2+ Modem Router DGN2200v3 - Wired Connection Doesn't Work / Wireless Does
Mar 11, 2013I tried restarting the router and the computer, but to no avail. I've also tried with another ethernet cable and tried several ports, but that did not work, either. What is interesting is that other computers in the household connect to the router via wire without problems. I suppose that means something's wrong with my computer, however, I do not know what. I have a netgear router which says "N300 Wireless ADSL2+ Modem Router DGN2200v3" on the back. My computer has Windows 7 Home Premium installed. I'm using a DSL connection, and Avast! antivirus.
View 7 Replies View RelatedWill Cable Modem Work For DSL Internet?
Feb 2, 2011I have DSL setup in my house and I want to know if using a cable modem will work and increase my speed. And will it work with a linksys router
View 1 Replies View RelatedGet A Cricket Modem To Work On Windows 7?
Jun 11, 2011how do i get a cricket modem to work on windows 7?
View 1 Replies View RelatedHow To Manage Internet Lan Cable And Usb Modem To Work Together
Oct 19, 2011how to manage internet lan cable and usb modem to work together?usb for mail and browsing ane lan for downloading i used win7,laptop
View 6 Replies View RelatedComcast Netgear WNR1000 Modem Won't Work
May 25, 2011I cannot get my computer to recognize my Netgear WNR1000. I have called Netgear to explain the issue and was on the phone with them for 45 minutes.They did get the laptop to work but my desktop still does not. They told me it was a browser error. If I disconnect the ethernet cable from the router to my computer everything works perfect.I tried to reinstall the CD that came with the router and as I try to get through step 2 it says no router detected.I think this is my hold up but I have no way to know how to fix this. I tried to go on the Netgear website and they tell me that I have to be able to connect to the internet to download through the router. Well I can't do that because obviously that is the hangup. If I click on my Network Connections. It shows my computer connected to a Network with limited capability and then a big red X going to the internet.
View 3 Replies View RelatedConnect From Wire Modem But It Doesn't Work
Oct 29, 2012I just got an used Pc from auction today.I installed it with Xp Pro. I am trying to connect it to my wire modem but it doesn't work.
View 4 Replies View RelatedAtt Westell Modem Won't Work With Linksys WRT54G
Jun 9, 2011When I hook up the Westell modem to my Linksys router WRT54G it wont work?
View 1 Replies View RelatedCisco Infrastructure :: 3825 Gi0/0 Interface Does Not Work With Modem
Mar 7, 2012We have a Cisco 3825 router which does not work well with a DSL modem(ISP provided). I have configured the Gi0/0 port of the router to plug into this DSL modem but it does not ping to the ISP gateway. If we do a shut/no shut on the interface then it work fine for about 30 secs. Sometimes even for 1 hr. Then the packets drop and we cannot pass any traffic through this interface.Now, if the ISP connection is terminated on a computer it works fine. It works fine without dropping any packet. I have tried various options like using a straight/cross cable. I have tried to configure the interface negotiation for 100/full, 100/half, auto/auto and almost all the options. I have also tried to interconnect the devices using a L2 device like a HUB. Nothing works.
View 7 Replies View RelatedNetgear WRG614 - Port Forwarding From Modem But It Doesn't Work
Feb 26, 2011I have a Netgear WRG614 and a Westell 610015 Modem. I need Port Forwarding. I have tried setting up a static IP then Port Forwarding but it doesn't work. I have tried port forwarding from the modem but it doesn't work. I wanna forward ports "80, 9958, and 5816". The reason is because I am gonna host a game server on my computer.
View 14 Replies View RelatedDell :: 1012 Get PIN Code To Unlock Modem With Ability To Work With Other Operators
Feb 27, 2012My laptop DELL 1012 is attached to the operator AT & T, which in Russia is not working. I'd like to get a PIN code to unlock the modem with the ability to work with other operators. How I can do it? [code]
View 1 Replies View RelatedRouters / Switches :: Connect Modem To Wireless Router / Modem Combo?
Aug 23, 2011My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies View RelatedSetting Up A Modem / Router Combo (D-Link DSL2730-B) As A Dedicated Modem?
Feb 28, 2013i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
Broadband :: Connect A Modem / Router To A Cable Modem?
Feb 7, 2012I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies View RelatedLinksys Access Point :: To Work The Wireless Repeater Mode Work With WPA2-AES
Sep 6, 2011Is there any chance the Wireless Repeater mode work with WPA2-AES ?If not, which model of AP should I buy to connect it with my wap54g as Wireless Repeater?
View 4 Replies View RelatedLinksys Wireless Router :: WRT54G V8 - Router Won't Work After Changing SSID
Dec 1, 2011I just reset my router to the factory settings in order to make some changes to it. However, when I tried to change the SSID to a unique name, I was unable to connect my computer to the wireless network. I then reset my security settings and left the SSID to the default name "linksys_SES_54125" and it is working just fine. I tried to connect with two separate computers both running Windows 7. My router is the WRT54G v8
why I wouldn't be able to connect to my wireless network when I change the SSID?
D-Link DIR-655 :: VPN To Work Network Won't Work
Sep 2, 2011I'm trying to set up my DIR-655 so I can use VPN to access my work PC. How can I set this up?
View 2 Replies View RelatedD-Link DIR-655 :: DSi Itself Does Work With WPA / But Games Only Work With WEP
Nov 19, 2011I have a DIR-655 B1 router. The firmware is 2.00 NA. Just to clarify, the DSi itself does work with WPA, but the games only work with WEP. I made a guest account and set it to WEP and it still does not work. I have tried making the main connection WEP as well, but when I go on the game and try it, it says it is WPA and not WEP. My friend has a DIR-655 as well, but the hardware and firmware version are different. Her games work flawlessly.
View 10 Replies View RelatedConnect Tata Photon Modem To Bsnl Wifi Modem Via Usb Port?
Jan 16, 2013I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies View RelatedWill Router Work Without PC
Feb 27, 2012My parents home has ADSL broadband through a Netgear router and connected to a desktop PC, they want to change the PC for a laptop for ease of access and to save space. Once the PC is disconnected will the broadband still be able to work. As the plan is for the router to be upstairs in the spare room and for them to use the laptop downstairs (wireless).
View 7 Replies View RelatedCannot Get Gateway Router To Work
Mar 20, 2012I cannot get my gateway router to work
View 1 Replies View RelatedWhat Is The Distance A Router Will Work
Apr 2, 2011what is the distance a router will work?
View 2 Replies View RelatedHow Does Asdl Router Work
Feb 3, 2012if i buy a adsl router can i run 2 xbox so my 2 sons can watch sky in there rooms ?
View 1 Replies View RelatedRouter To Work As A Switch?
Oct 10, 2012A switch and a router are both pretty straight forward in regards to how they work. Tho I have a problem with the router. I have 5 computers in my home and we have 5 different ips for the computers to use, these are handled by a switch. <Note: these are 5 *unique* ips that does NOT share bandwidth>
Recently I got a router and when I plugged it in it only gave us 1 ip to share amongst all 5 computers. This is a pretty big problem as we all of the sudden *share* the bandwidth. <Edit: the problem is that the router only gives us 1 of the 5 ips for the whole network to share>.What I wonder is what is it called when you get a router to accept multiple external ips and spread them out across the network, like a switch does? I assume this is a "special" feature on routers?
Will A Router Work As A Switch?
May 6, 2011I want to be able to easily switch off the internet, but stay connected to my local network. I'm trying to set up an arrangement that allows computer 1 to disconnect from the Internet, but stay connected to the local network, so computer 2 can still access the printer that is slaved to computer 1, and let computer 2 connect to the internet anytime.If absolutely necessary, I have a second Router that might be employed, for switching purposes. The trick is to be able to do this switching simply. Can I issue a command from computer 1 that will let me disconnect from the internet, but stay on the local network?
View 3 Replies View RelatedComputer Randomly Disconnects From Modem But Modem Is Still Running
Jul 5, 2012my computer randomly disconnects from my modem and will not reconnect until I restart my computer (do not need to restart modem). When I check the modem, it always is still running. The lights on the modem do the exact same thing whether the internet is working or not. The disconnection is entirely random. Sometimes it will disconnect immediately, sometimes it will take up to a few hours. I do not have a router hooked up to the modem, and the only other thing the modem is hooked up to is our tv. But even when the tv box is off, we still randomly disconnect.
On the previous forum thread that I read, some of the comments asked for the person to paste their entire ipconfig and their entire ping list from command prompt I will post that below: [code] Could it possibly be a virus? I am currently performing a virus scan using Microsoft Security Essentials. I will report the results of that tomorrow, seeing that it will take several (up to 10) hours to finish and it is nearly midnight of me posting this.I should also note that whenever I unplug my Ethernet cord it gives me a symbol that looks like this other than the regular disconnect with the red "X" over the wire symbol.
Routers / Switches :: Cannot Get Router To Work?
Jan 28, 2011I have a Linksys Cisco system router and cannot get it to work, I believe I have it hooked up right. I am wanting it for a Sylvania wireless mobile internet device.
View 1 Replies View Related