D-Link DIR-655 :: DSi Itself Does Work With WPA / But Games Only Work With WEP
Nov 19, 2011
I have a DIR-655 B1 router. The firmware is 2.00 NA. Just to clarify, the DSi itself does work with WPA, but the games only work with WEP. I made a guest account and set it to WEP and it still does not work. I have tried making the main connection WEP as well, but when I go on the game and try it, it says it is WPA and not WEP. My friend has a DIR-655 as well, but the hardware and firmware version are different. Her games work flawlessly.
View 10 Replies
ADVERTISEMENT
Jan 20, 2011
i have angels online installed in my laptop and now i'm in the hospital and i'm trying to use angels online, i was able to update the new patch for the games which shows that the internet works but when i try to connect to any of the servers it says that the connection to the server failed. how do i get my online game to work with the public internet?
View 1 Replies
View Related
Sep 2, 2011
I'm trying to set up my DIR-655 so I can use VPN to access my work PC. How can I set this up?
View 2 Replies
View Related
Sep 6, 2011
Is there any chance the Wireless Repeater mode work with WPA2-AES ?If not, which model of AP should I buy to connect it with my wap54g as Wireless Repeater?
View 4 Replies
View Related
Apr 25, 2012
I have an DLINK-dir 815 router.. I have tried for 10 hours to get broadcast IP to work, no luck.. All html/javascript modifications.
The WOL works on LAN, but not over internet, so I figure it's the broadcast IP that needs to be virtual servered
View 1 Replies
View Related
Nov 10, 2012
The company has a glitch that they are not sure if they will fix so you can't record with mac. I am unable to return my cameras to staples and Im out the money for the memory cards I opened. It says you can record with MAC clearly on the box!!!! Bad business practice for STAPLES and DLINK.
View 3 Replies
View Related
Sep 22, 2010
For some reason, I'm dropping from IRC but the web seems to work.
I don't know what I got but, I'd like to have this fixed ASAP
Product Page: DIR-615
Hardware Version: C1
Firmware Version: 3.12NA
View 13 Replies
View Related
Oct 13, 2011
I have a client that is using a DIR-655 router. He uses Cisco VPN to access his work PC. At first, the only way we could get this to work was by skipping the router and plugging directly in to the modem. This is not ideal - so after receiving no response here to this question - I did the following - I put his PC (by IP) in a DMZ. This has done the trick - but will only work until the next time his IP address changes.
View 8 Replies
View Related
Feb 18, 2011
I can't get the email to work from the router. It worked flawlessly for weeks then stopped working. I verified that the outgoing settings are still valid and that my antivirus is not blocking the email.
View 7 Replies
View Related
Jun 14, 2012
Will the ubicom-distro for the DIR-652 work with the DIR-651?
View 1 Replies
View Related
Jan 4, 2013
I just purchased 2 cameras and have one set up.
Firmware V 1.12
Works great on my android phone and connects fairly quick. When I try to see the camera image on my PC with windows 7 64 bit, I log into my d-link and it shows the camera name on left side of screen, then says Java run time environment not installed.I uninstalled java 5 times and re installed both 32 and 64 bit but keeps coming back as not installed. Camera is set up wirelessly through a Belkin router, so far no EZ config
View 8 Replies
View Related
May 7, 2011
hardware version D3, FW 4.10 and 4.11 same problem.
i tried with 4 wlan adapters: two of them support 802.11b/g, they always work find no matter which settings. the other two support 802.11b/g/n, as default "n" is enabled, so does DIR-615, both wlan adapters can be connected to DIR-615, they get their LAN-IP, but they can access neither DIR-615(no respone to ping) nor internet. but if i disable "n" mode either in the adapter or in DIR-615, everythin works fine, of course only with 54mbit max.
so what can i do to use the n mode?
View 1 Replies
View Related
Feb 8, 2013
i've tried plugging in various devices (computer & solar panel management device) into the ethernet ports to no avail. i just updated the firmware, reset the router, and still no luck. all of the lights work when i reset and the wifi works fine. do i need to do something in the settings to turn on the hard connection?
View 3 Replies
View Related
Aug 18, 2012
I can't get my VOIP ATA (linksys SPA-2102) to work properly with the shiny new DIR-835. I updated the firmware to 1.02 and messed around with various settings but it just won't work. Well, I can get registered and everything looks ok but, when I receive a call, the person at the other end can't hear me. I can hear them fine, but they can't hear me. I don't have any problem when I call someone. Still, it is frustrating. The problem persist even though I put the ATA in the DMZ.
View 3 Replies
View Related
Jan 19, 2011
I have a D-Link DIR-655 REV.B and have no luck getting my Nettalk Duo device to work with it. I have tried forwarding all of the needed ports and even placing the device in the DMZ but can't get it to work with this router. I have noticed that this router has no way to disable SIP ALG which should eliminate the issues I am having. Why would D-Link give us no way to disable this "feature" that is known to cause issues with VOIP devices?
View 14 Replies
View Related
Aug 8, 2009
I have a DIR-825 since a couple of days, Hardware version B1, firmware 2.01EU (date Fri, 12, Jun, 2009 = latest european firmware) Have portforwarding for ports 25, 80, 443, 143, 993 via virtual server to a local linux server (192.168.0.3)
My (SIP protocol) VOIP phone (192.168.0.100) does not work anymore since I use this router. It worked fine on my old WRT54G. The phone logs-in normally at the voip provider but when I make a call, it seems that the ports are not forwarded or are blocked by the firewall. I have tried to manually setup portforwarding and virtual server instead of portforwarding.
I have tried many things, from disabling QOS, SPI, end point filtering and more but it does not work. I have also programmed DMZ for my ip-phone, but it does not work. Nothing found in the logfiles about frame drops. (I have setup a syslog on my linux-server)
There seems to be a bug causing frames dropped, as my setup has always worked with my WRT54, and should work with DMZ set, but it does not. The same setup works fine on a DIR-655 of a friend.
View 14 Replies
View Related
May 27, 2012
My DIR 655 is refusing to act like a router and more like a normal switch. Anything involving the router side of things(DHCP,firewall,wireless, etc) does not work.
Basically when it powers up the blue power light comes on and that's it. If I plug my cable modem into the wan port then this light comes on with nothing else. If I then proceed to plug a cable into Lan 1 I get the address of my cable modem assigned to my computer and all internet access is fine. As opposed to being assigned an address from the router's DHCP. If I plug a cable from another router into any of the lan ports on the DIR 655 then I get assigned addresses from that router's DHCP and all internet access is routed through.
View 1 Replies
View Related
Feb 10, 2012
I tried to set it up on a new dir 655 but the password the roku asks for does not work. I have the latest firmware installed. I tried entering my ssid manually and then the key. I did reset everything and try again. Why is my wireless not working? The ethernet port to my desktop is working fine.
View 2 Replies
View Related
Aug 10, 2011
The DIR-825 wireless simply doesn't work. When I called tech support, we cleared some settings and hard-powered the unit on/off and it finally turned on the wireless radio. A couple weeks later I pull out my laptop to use in the house via wireless and the wireless on the DIR-825 is OFFLINE AGAIN...fallen and it can't get UP.Is anyone having issues with keeping their wireless online? OK - powered it off for 5 minutes...now the wireless is working. I think changing configuration settings causes the thing to lock up.
View 1 Replies
View Related
Jan 15, 2013
Region : New Zealand
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP : Telecom New Zealand
getting the MR3420 but will be using a ZTE 669 Turbo stick as the modem ISP Telecom New Zealand.I did notice that they seem to be supporting the ZTE 668+ which I'm guessing is a vary similar model.
View 3 Replies
View Related
Nov 3, 2010
I wanted to upgrade to the latest firmware (2.03NA). Something went wrong and now the router comes up with the orange light flashing. So the system is in emergency firmware upgrade mode. I set my IP to 192.168.0.2 and connect to the web interface at 192.168.0.1. I see a page with "Firmware Upgrade System" and "Version 1.0.0.2". So far so good. I can now select the firmware and click "send". But then nothing really happens. I can wait for a couple of minutes and then run into a timeout. I tried different browsers (Linux: Firefox, Chrome, etc). I even tried it Windows 7 with IE 8 and I get the same result. It seems that the cgi (192.168.0.1./cgi/index) is not really doing anything?
View 12 Replies
View Related
Feb 3, 2013
Recently I bought a Windows 8 (64bits) computer, which is now part of my home network, but it has problems with Shareport. The other computers can be easily connected to a USB printer on my DIR-825 (HW B1) router, but the W8 computer refuses to completely install Shareport (both the CD version and the latest download v1.17). I also tried Shareport-Plus v4.11 (found on the DIR 835 page), which did install correctly, but was still unable to see the USB printer. What can be done? Can D-Link provide a new version of Shareport?
View 3 Replies
View Related
Dec 25, 2011
I can't get my brand new DCS-930L cam to connect to my network by using the WPA / WPA2 encryption. Works ok wired, with WEP or with no encryption enabled. Red led is on the front. I've tested sw version 1.02, 1.03 and the latest 1.04b03. Same result: WPA doesn't work. I have a Thomson TG789 Gateway/Router as provided by my ISP. All other units in the network works perfectly fine on WPA i.e. PC, Mac, printers, mobile phones etc etc.
View 1 Replies
View Related
Jan 18, 2012
Has anybody gotten the FTP option to work with this camera? And if so how did you set up the path to point to the ftp share. The instructions say one thing but that one thing doesn't work. FTP is setup locally on my NAS box which does work. Or is this another one to add to the Firmware which list?
View 4 Replies
View Related
Dec 12, 2010
I have hardware version B1, firmware version 2.00NA and several computers (wired & wireless) with Vista & Win 7 x64 and a Brother HL1440 printer.When I print something it comes out scrambled, images missing or cut off, empty pages, etc. This same setup worked fine when it was directly into one computer, then shared on the network though windows sharing. The problem was that computer had to be running to print off the network. I got the dir655 since it had printer sharing but so far its not been of any luck.
View 5 Replies
View Related
Jan 6, 2011
I have a DSL router Pirelli PDF A1000G.I have a Linksys e3000 and I have a dap-1522.When I bought a dap-1522 I thought it could do access point in fact i saw many videos in dlinktv before choosing an access point from DIY with mike etc to youtube there are 2 videos one showing bridged mode and another ap mode!Now what happens is this I have upgraded from firmware 1.11 that came as default to 1.21 i connect it wired to my linksys e3000 when it is connected with the ethernet cable wired I can connect to the internet and navigate and open sites and my ps3 can connect to it but my range is not very good only 40%!
Now I bring it downstairs remove the ethernet cable and connect it to the power and then you can connect to it but since it isn't connected to my router which is upstairs i can't access websites neither can I play on my ps3!I don't know does only ap mode works when it is connected to the router wired because what happens is if you don't put ethernet cables in the back of the dap-1522 and just connect it to power then here doewnstairs you can connect to the dap-1522 my signal is like 87% but while I'm connected with my laptop I can't access websites and in the ps3 I can't connect!
and choose access points there are (4) listed: dap-1522, dap-1160, dap-1353 and dap-2553, I thought of buying dap-1522 because it could support abgn while 1160 only supports g and 1353 only supports n to repeat to signal here downstairs and be a good access point!
View 3 Replies
View Related
Feb 20, 2011
I use this router for my laptop with WPA2 encryption.. It works fine But When I try to use my iphone for wifi , It says ' Unable to join the network"
When I remove the security, It work s fine on iphone. how to allow iphone to access the wifi
View 1 Replies
View Related
Nov 21, 2012
i have a DIR-615 Rev C1, firmware 3.13.
After a reboot my password doesn't work anymore (wich is normal I guess) and all default passwords dont either. Such as ''Password'' or ''Admin''.
View 1 Replies
View Related
Feb 17, 2013
I realized that when I connect dir825 on bridging mode to my current voip router provided by my ISP (dvg-n5402) ,shareport does not work as it seems to be using the default gateway to find the usb, which in this case default gateway goes to the gateway of my voip router. Is there any way that I can make shareport use the gateway of my dir825 instead?
View 5 Replies
View Related
Oct 4, 2011
My netgear router kept dropping my internet connection so after some research I bought the DIR-655 router. It installed fine. My computer connects to the internet great and so does my xbox. But now my xbox doesn't see my PC so I can not set up a media center connection. I know it isn't a firewall setting or a setting on my computer because it worked fine with my old netgear router and the router I had before that. I even double checked by turning off the firewall. I have version 2.0 firmware and the settings are out of the box. I assume there is something I need to set up to get this to work but I have not been able to find any answers on the internet. I don't know a lot about networking as I've always used out of the box settings and had success with everything working the way I like.
View 6 Replies
View Related
Oct 4, 2011
I have problem connecting Samsung (series6) TV to DIR-600. TV wired connection does not work with DLINK DIR-600 150. Is there a work around ?
Config :
DIR 600 is working in access point mode
Check list : Cat-6 Patch Cord - works (brand new works fine with laptop)TV network port - works (works fine with aztech ADSL/Switch)
View 14 Replies
View Related
Feb 7, 2011
Attempting to connect my iPod to the wireless network. The SSID is set to visible and the ipod finds the network. I set the ipod to the security type of the router and have verified the security key. When I attempt to connect I get a message that says unable to connect to the network.
View 8 Replies
View Related
May 12, 2011
Edit I've found a work-around. It's on page 2: [URL]
I'm having this really weird issue with my DIR-655 revB. I have some port forwarding rules set up and externally they work fine. However, if I try connecting to my IP address using those same ports from a computer within my LAN, it won't connect.
Externally, I can ping my WAN address and connect through forwarded ports. No problems. Internally, pinging my WAN address apparently works (just now is the first time that's worked for me), however I can't access any of my computers using the WAN IP and port forwarded ports. I can access them by going directly to their hostnames or LAN IPs.
Things I've tried:
-Disabling/enabling firewalls on all computers involved
-Disabling/enabling QoS engine
-Disabling/enabling DNS relay
-Disabling/enabling Advanced DNS
-Adding custom nameservers from Google and Comodo
-Restarting computers
-Clearing DNS cache (I use a dynamic DNS name which works externally but not internally. This gets the correct IP internally and connecting directly to the IP doesn't work either.)
-Modifying the NAT Endpoint Filtering settings
I have an external DSL modem connected to the router using PPPoE if it matters.
The weird part is that it works externally but I've modified all of the values I can think of in the config with no luck. I upgraded to the DIR-655 from a DIR-615 which had all these settings in it and worked fine (until it started acting up which is why I replaced it).
View 14 Replies
View Related
