D-Link DIR-655 :: Shareport Printing Does Not Work Correctly
Dec 12, 2010
I have hardware version B1, firmware version 2.00NA and several computers (wired & wireless) with Vista & Win 7 x64 and a Brother HL1440 printer.When I print something it comes out scrambled, images missing or cut off, empty pages, etc. This same setup worked fine when it was directly into one computer, then shared on the network though windows sharing. The problem was that computer had to be running to print off the network. I got the dir655 since it had printer sharing but so far its not been of any luck.
View 5 Replies
ADVERTISEMENT
Feb 3, 2013
Recently I bought a Windows 8 (64bits) computer, which is now part of my home network, but it has problems with Shareport. The other computers can be easily connected to a USB printer on my DIR-825 (HW B1) router, but the W8 computer refuses to completely install Shareport (both the CD version and the latest download v1.17). I also tried Shareport-Plus v4.11 (found on the DIR 835 page), which did install correctly, but was still unable to see the USB printer. What can be done? Can D-Link provide a new version of Shareport?
View 3 Replies
View Related
Feb 17, 2013
I realized that when I connect dir825 on bridging mode to my current voip router provided by my ISP (dvg-n5402) ,shareport does not work as it seems to be using the default gateway to find the usb, which in this case default gateway goes to the gateway of my voip router. Is there any way that I can make shareport use the gateway of my dir825 instead?
View 5 Replies
View Related
Jul 27, 2012
First off, my router is a D-Link DIR-655, firmware v2.07. I'm trying to port forward port 25565.
My port forward settings are this:
However, when I use this open port checker, it claims that I don't have that port open. It looks like this, without the blurred out parts:
Added note: The way I want to use it is by my IP (xxx.xxx.xxx.154:25565). I have the software installed to do so (I'm using a minecraft server, connecting through minecraft), but I can't enter my IP in the IP address field, it says that it's out of the range of the LAN.
View 2 Replies
View Related
Jan 21, 2011
Ok so our company has a VPN set up on our workstation laptops for employees to be able to connect to the office network from home.We use CISCO VPN CLIENT, and a pre-setting .pcf file to upload our vpn into the client. The settings are correct completely to allow the VPN to work from home. All of our older workstations (Latitude D510-D630's) work with Windows XP SP3 32b. Recently i purchased new laptops (Latitude E6410's) and have started issuing them out with Windows 7 Enterprise 64b.A couple employees from home cannot get their VPN to work correctly at home with the New Laptops. Their old laptops work fine with the VPN, but the new ones dont. They are running a Frontier DSL modem with wireless.The VPN connects just fine on the new laptops, but the problem is... Nothing works. Outlook does not connect, They cannot access any of our network shares or drives. And cannot use any of our company's software that requires our network access.
I tried uninstalling the the CISCO Client, and reinstalling it, No Go.I tried changing the MTU Settings on the client and network adapters and wireless adapters, No Go.And it seems to be just an ISSUE with employees trying to VPN through a dsl connection using the new laptops, where others with the new laptops can VPN in fine through a time warner connection. But remind you, their old laptops work fine.. which seems kind of odd to me.
View 7 Replies
View Related
Feb 17, 2012
I am user of Dell Inspiron 1545 and I have problem with Internet. Till yesterday everything just worked great, when I was turning on a wi fi, it always found a network I wanted to. Yesterday, the current has been cut of. (?) and I lost connection to internet. After current camer back, everyone got internet back, but not me. My wi fi is still finding almost all networks except one, the most important one.
View 1 Replies
View Related
Jan 9, 2009
I have disabled all antivirus and firewall services on my PC and I can't get Shareport icon to turn green and recognize my DIR-655 (Hardware Version A4, 1.21 firmware). I've uninstalled the Shareport software twice. I use AVAST (but all services are disabled).The router setting is set to "USB Network" with a 30 second time out. I'm running WinXP SP3, 802.11G only.
View 11 Replies
View Related
Aug 1, 2011
My router is near my TV.I was hoping to connect a usb videocapture device to the usb port and connect with shareport to my pc to stream tv content.
View 2 Replies
View Related
Aug 10, 2011
something has changed, and now SharePort is back to its old ... Text prints OK, but photos only print parts then eject the page and print some more psycho garble on the next page....etc...I have done all the uninstall - reinstall drills.... same result.... Just don't understand why it WAS working for a while, and what changed to make it un-work now.... The software looks to be working, but the actual output is foobar....
View 5 Replies
View Related
Mar 3, 2013
im wondering if it still have issue on shareport. cause last time i updated my 655 to 2.07 it has issue with the shareport.
View 1 Replies
View Related
Jun 18, 2012
I am trying to get the ACS 5.3 to work with NCS but cannot make it work correctly. url...But this does not show how the ACS referencing AD groups would work when determining which custom attributes to use.
On the ACS 5.3 i have set up the following .The ad is working and in Users and identity stores/External identity stores/Active Directory then my AD test works fine.I have set up the Users and Identity stores/Identity Groups with appropriate ip s.I have configured the Network Device Groups/Network Devices and AAA Clients with the ip address and Authenication optionsA.In Policy Elements/Authorisation and Permissions/device administration/shell profiles.I have creeated a shell profile called network shell pro which das a common tasks of def priv = 0 and max priv = 15
Now i can get into the NCS but i do not see any of the administration buttons on NCS - so this means the custom attributes are not working.i shouldnt need a user for this on the ACS as its using AD.
View 2 Replies
View Related
Dec 23, 2011
E4200v2 DMZ does not appear to work correctly?I have two e4200v2 both with latest firmware and it appears to me that the DMZ setting does not work. I continue to have to apply many port forwarding and triggering rules to make needed ports accessible.
View 9 Replies
View Related
Nov 20, 2012
I have a problems with one SA520W.The LAN port don't work correctly. If i connect PC directly via ethernet cable (i try 2 different cable and 2 different PC) the DHCP don't assign an IP. If i reset to factory default and manual insert IP (192.168.75.1) don't work.
View 2 Replies
View Related
May 7, 2013
I plugged the printer into the DIR-655 and downloaded Shareport. Nothing. HP Laserjet 1320
[URL]
If Shareport can not be used, which one of the programs on that page might work?
View 5 Replies
View Related
Jan 21, 2012
I have installed a d-link router dir-825. I have already connect a printer with shareport and it's working very well. We have also a laptop wireless connected; The problem is that after installing shareport on the laptop I get the message in shareport: no device connected;
View 14 Replies
View Related
Nov 16, 2011
Is there a client mode option for the DIR-655?I just got a nice cable modem/router from my ISP and I'd like to re-purpose my DIR-655.If I could turn a usb webcam, printer, or harddrive into wireless client, that would be cool. I would just rather re-purpose the device versus selling it.
View 2 Replies
View Related
Feb 11, 2013
Im having a issue with that any of my computers without a wireless connection have been incapable of getting out on the internet with the new router that i got myself, i know the cables works etc, since they work perfectly fine with the old modem alone, but wont work at all with this unless on a computer with wireless connection
View 5 Replies
View Related
Aug 16, 2011
Does Cisco 602 office connect AP working correctly with a 5508 controller? As cannot get it to work as having random problems. Ie I see the SSID broadcast on the AP, but no authentication messages for clients on the controller.I have the same configuration setup on a 1142 office extend access point and works fine.The other 602AP i have is seen by the controller, but will not even broadcast the SSID.
View 3 Replies
View Related
Sep 11, 2012
I just upload firmware1.0.1.10 on 2 WAP121. After the update and reboot, I was able to confirm the firmware version in the System Summary menu. The update is uneventful.However, the functions WDS Bridge and WorkGroup Bridge no longer works on two WAP121:
- For WDS Bridge, when I configure a Remote MAC Address with WPA Encryption and then I click on the Save button, nothing happens there. But it works well when I choose without Encryption.
- For WorkGroup Bridge, when I click on the Save button (even without changing the configuration), I have a message "Certificate file uploaded successfully" and another error message in the background: "error occured for query you send path . device.sync ... "
1.0.0.3 firmware is not available on your site, it is imposible for me to go back.
View 2 Replies
View Related
Apr 14, 2011
Shareport recognizes the printer only after resetting the DIR-825 router. I don't know if this is a Shareport issue or an issue with the DIR-825 disabling the USB port.This happens after there is no PC connected to the router for a number of hours such as overnight. I have 1 laptop and 1 desktop running Win 7 64-bit and 1 laptop running Win 7 32-bit. The desktop is connected directly to the router and the laptops connect via wifi. All PCs work perfectly when the DIR-825 is reset.This isn't a big issue but it's extremely annoying and shouldn't happen. I use a Cisco WAG320 in my office that has similar USB functionality and this never happens.
D-Link Router: DIR-825
FW Version: 1.13NA
Operating System: Win 7 32 and 64 bit
SharePort Version: 3.1.0 R1 (SXUPTP Driver : 3.4.6.0)
View 2 Replies
View Related
Mar 5, 2012
Is it possible in the near future?
View 5 Replies
View Related
Aug 24, 2012
Firmware 2.07NA for version B1 units contains two bugs:
1 - An underscore in the Device Name causes a cryptic "37" error to appear when attempting to save any changes to the network settings. Version 2.03 allowed the underscore character. Other invalid characters, such as a "-", generate a more meaningful "Device name given is invalid" message.
Removing any underscores eliminates the error and allows settings to be saved.
2 - The upgrade breaks SharePort communications; the SharePort client utility cannot see the USB port on the device after upgrading from 2.03 to 2.07. This occurs with the latest 3.1.0 R 1 Utility (SXUPTP Driver: 3.4.6.0).
Downgrading back to 2.03 is a workaround.
View 1 Replies
View Related
Apr 10, 2012
I setup sharePort today and attached an external 1 TB hard drive. Seems that All my internet connections are slow now. I have a seperate PC that I use VPN to connect to work with and suddenly its very slow. My wife said her laptop suddenly slowed down too. The PC that I installed SharePort software seems slow too. Is/can SharePort be dragging down the router? I turned off the external HD and it's still slow.
View 14 Replies
View Related
Jun 30, 2012
I have done this before on this exact model about a month ago, so it's still fresh in my mind on port forwarding. (note, I'm using firmware version: 1.0.00) I am running a windows 7 computer wirelessly using this router.What I do for port forwarding is type in router IP (192.168.2.1) in internet explorer, type in "default" as username and "admin" as password. I click the "applications and gaming" link which brings me to port range forwarding.
I fill in my port info, in this case a mine craft server running on 25565. I set up two of the same ports, different names both at the same port, one running TCP and the other UDP, when it worked previously the "both" option did not work correctly. (I used to have a private network that a buddy of mine set up a while back, and I doubt he remembers what to do and I don't know where the manual is to make a new one, searching the internet sends me spam of people asking questions.)
I read somewhere it may have something to do with DHCP server settings conflicting with my IP. My IPv4 address reads 192.168.2.100, and the DHCP settings says the same.
View 1 Replies
View Related
Apr 4, 2012
I have an HP OfficeJet J4500 that works fine with shareport on my Win7 x64 computer. the XP and Win2000 ones both have the same "partial page then lockup" problem. when this happens, the only way to disconnect shareport is to reboot the router. It shows connected to the same computer even if I reboot that computer. I started with V1?? from the install disk then tried 3 and finally 4 with no improvement. I have read several posts about this or similar problems. This is the primary reason I switched routers and bought the D-Link DIR-655, for the print server feature...
View 3 Replies
View Related
Jan 19, 2013
This appears to be a different issue than the one described in the sticky above. I have two DAP-1533's. Both are running firmware 1.02 from the Taiwan website. I am running both in Bridge mode at 5 GHz only. They both exhibit the same problem. If you go to "Maintanence > Time and enable NTP it never updates to the correct time. Also, after "saving" the time gets set to the same time as shown grayed out in the "Set the time manually" window. I am using this time server: ntp1.dlink.com and tried others and have tried time server ip address in case it was a DNS issue. Also, why is there no DAP-1533 section on the forum?
View 9 Replies
View Related
Mar 7, 2013
I have a cabled network printer, Xerox Phaser 6125n, that have always worked properly from my 3 desktop computers and my laptop.A few days ago, my old dlink router went dead, and I replaced it with the TP-Link WDR4300 router. Everything worked as usual afterwards, until I found out I could no longer print on my printer. I can access the printers web interface through the ip adress, change settings and such through the browser, but the printer has offline status in windows and print jobs never leaves the print queue in windows. I tried deleting the printer in windows (tried both windows 7 and 8) to reinstall it.
View 7 Replies
View Related
Apr 20, 2011
It seems that motion monitoring setup for 930L is not working correctly.I've setup the camera to ONLY monitor the half of the screen, but it is still monitoring the other half of the screen as well.I've setup the camera to FTP the messages when motion is detected, and it is uploading the images when the other half contains the motion.
View 6 Replies
View Related
May 27, 2012
I have a DLink DIR-615 rev. B2 firmware 2.25. A few days ago, I started using Comodo Unite for VPN access with friends and LAN gaming. However, just recently the program stopped working correctly. I have reset my configuration, tried multiple different settings, and nothing at all has remotely worked.
View 3 Replies
View Related
Mar 5, 2013
Region : United Kingdom
Model : TL-WR702N
Hardware Version : V4.20.0
Firmware Version :
ISP :
Using a TL-WR702N router as a wireless access point on a narrow-boat. How to print from my i Pad and iPhone to a printer on my narrow-boat, on the UK inland waterways. The Apple store geniuses seem to contradict each other on how it can be done, if at all. I have an i Pad and iPhone and would like to print photos, documents and the occasional web page to my Canon MG4250 printer, which has Air print capability, while I am cruising. I don't have a PC on the boat and of course there is no telephone or broadband connection (other than via 3G on my iPhone). In other words, I want to link my printer to a router, then when required, wireless connect to the router to print from my Apple devices.
Will the TP Link TL-WR702N 150Mbps Wireless N Nano Router allow me to do this? Reading the product information, this nano router looks very flexible, but all five modes mentioned seem to utilize an internet connection. I only have an internet connection via 3G on my iPhone, and can also tether the i Pad to the iPhone's WiFi hotspot to give internet connection on the i Pad. Would I have to use this internet connection somehow, or can I just connect the Apple devices to the printer via the WiFi on the nano router?
In effect I want to create a wireless access point for printing, without any, or at least a regular, internet connection.
View 4 Replies
View Related
Sep 2, 2011
I'm trying to set up my DIR-655 so I can use VPN to access my work PC. How can I set this up?
View 2 Replies
View Related
Nov 19, 2011
I have a DIR-655 B1 router. The firmware is 2.00 NA. Just to clarify, the DSi itself does work with WPA, but the games only work with WEP. I made a guest account and set it to WEP and it still does not work. I have tried making the main connection WEP as well, but when I go on the game and try it, it says it is WPA and not WEP. My friend has a DIR-655 as well, but the hardware and firmware version are different. Her games work flawlessly.
View 10 Replies
View Related
Jan 11, 2013
The scenario I am facing is, trying to have the ability to print from my laptop computer remotely to my home printer which supports IPP.What I did so far was to make sure that I enabled IPP in the printer. So the URL is 192.168.1.101:631. (I am able to connect and print to the printer on local network usinghttp://192.168.1.101:631.) I then went into my router and enabled port forwarding for that address and made sure to specify port 631. It doesn't work. I took the following steps: (It works neither with XP or 7)Windows 7 Steps:1. Start-Devices and Printer2. Add a printer3. Add a network, wireless or Bluetooth printer4. Clicked "The printer that I want isn't listed5. Choose "Select a shared printer by name" Below is the scheme I followedWhat is the proper way of setting this to function properly so that I can print to my computer remotely. I want to be able to print to the printer directly and not through a server or another computer. Is this even possible?
View 2 Replies
View Related
