D-Link DIR-655 :: Hookup A Printer Using Shareport?
May 7, 2013I plugged the printer into the DIR-655 and downloaded Shareport. Nothing. HP Laserjet 1320
[URL]
If Shareport can not be used, which one of the programs on that page might work?
ADVERTISEMENT
D-Link DIR-825 :: Printer Connection With Shareport?
Jan 21, 2012I have installed a d-link router dir-825. I have already connect a printer with shareport and it's working very well. We have also a laptop wireless connected; The problem is that after installing shareport on the laptop I get the message in shareport: no device connected;
View 14 Replies View RelatedD-Link DIR-655 :: Shareport Can't See USB Devices
Jan 9, 2009I have disabled all antivirus and firewall services on my PC and I can't get Shareport icon to turn green and recognize my DIR-655 (Hardware Version A4, 1.21 firmware). I've uninstalled the Shareport software twice. I use AVAST (but all services are disabled).The router setting is set to "USB Network" with a 30 second time out. I'm running WinXP SP3, 802.11G only.
View 11 Replies View RelatedD-Link DIR-825 :: Use VideoCapture On Shareport?
Aug 1, 2011My router is near my TV.I was hoping to connect a usb videocapture device to the usb port and connect with shareport to my pc to stream tv content.
View 2 Replies View RelatedD-Link DIR-655 :: PC Shareport On Windows 7 X64?
Aug 10, 2011something has changed, and now SharePort is back to its old ... Text prints OK, but photos only print parts then eject the page and print some more psycho garble on the next page....etc...I have done all the uninstall - reinstall drills.... same result.... Just don't understand why it WAS working for a while, and what changed to make it un-work now.... The software looks to be working, but the actual output is foobar....
View 5 Replies View RelatedD-Link DIR-655 :: Does 2.07 CA Revision B Still Have Shareport
Mar 3, 2013im wondering if it still have issue on shareport. cause last time i updated my 655 to 2.07 it has issue with the shareport.
View 1 Replies View RelatedD-Link DIR-655 :: Hookup A Usb Cable To Get Router Settings
Apr 10, 2011I have been trying for days to get a HP Photosmart Plus B209a wireless printer to work with my D-Link DIR-655.Going through the HP setup cd for I get to the section where it wants to hookup a usb cable to get router settings and finds my network and then I put in the password. Then after looking for a bit it says it can't find the printer.Looking at the wireless status page it says the ip address is 0.0.0.0.Reading on HP's website it says that you must have the router set to broadcast the SSID, I believe mine is set to hide. How would I go about changing it to broadcast AND would it mess up all my other settings changing it to Broadcast, meaning will I have to reconfigure the other computers again? Do I use the set up wizard to edit things or is that for first time set up ?
View 5 Replies View RelatedD-Link DIR-655 :: Client Mode For SharePort?
Nov 16, 2011Is there a client mode option for the DIR-655?I just got a nice cable modem/router from my ISP and I'd like to re-purpose my DIR-655.If I could turn a usb webcam, printer, or harddrive into wireless client, that would be cool. I would just rather re-purpose the device versus selling it.
View 2 Replies View RelatedD-Link DIR-825 :: Shareport Doesn't Work In Windows 8?
Feb 3, 2013Recently I bought a Windows 8 (64bits) computer, which is now part of my home network, but it has problems with Shareport. The other computers can be easily connected to a USB printer on my DIR-825 (HW B1) router, but the W8 computer refuses to completely install Shareport (both the CD version and the latest download v1.17). I also tried Shareport-Plus v4.11 (found on the DIR 835 page), which did install correctly, but was still unable to see the USB printer. What can be done? Can D-Link provide a new version of Shareport?
View 3 Replies View RelatedD-Link DIR-655 :: Shareport Printing Does Not Work Correctly
Dec 12, 2010I have hardware version B1, firmware version 2.00NA and several computers (wired & wireless) with Vista & Win 7 x64 and a Brother HL1440 printer.When I print something it comes out scrambled, images missing or cut off, empty pages, etc. This same setup worked fine when it was directly into one computer, then shared on the network though windows sharing. The problem was that computer had to be running to print off the network. I got the dir655 since it had printer sharing but so far its not been of any luck.
View 5 Replies View RelatedD-Link DIR-825 :: Shareport Does Not Work In Bridging Mode
Feb 17, 2013I realized that when I connect dir825 on bridging mode to my current voip router provided by my ISP (dvg-n5402) ,shareport does not work as it seems to be using the default gateway to find the usb, which in this case default gateway goes to the gateway of my voip router. Is there any way that I can make shareport use the gateway of my dir825 instead?
View 5 Replies View RelatedD-Link DIR-825 :: Requires Reset To Keep Shareport Working
Apr 14, 2011Shareport recognizes the printer only after resetting the DIR-825 router. I don't know if this is a Shareport issue or an issue with the DIR-825 disabling the USB port.This happens after there is no PC connected to the router for a number of hours such as overnight. I have 1 laptop and 1 desktop running Win 7 64-bit and 1 laptop running Win 7 32-bit. The desktop is connected directly to the router and the laptops connect via wifi. All PCs work perfectly when the DIR-825 is reset.This isn't a big issue but it's extremely annoying and shouldn't happen. I use a Cisco WAG320 in my office that has similar USB functionality and this never happens.
D-Link Router: DIR-825
FW Version: 1.13NA
Operating System: Win 7 32 and 64 bit
SharePort Version: 3.1.0 R1 (SXUPTP Driver : 3.4.6.0)
D-Link DIR-655 :: SharePort Mobile IPhone / IPad App
Mar 5, 2012Is it possible in the near future?
View 5 Replies View RelatedD-Link DIR-655 :: Two Firmware 2.07 Bugs - Error 37 And SharePort
Aug 24, 2012Firmware 2.07NA for version B1 units contains two bugs:
1 - An underscore in the Device Name causes a cryptic "37" error to appear when attempting to save any changes to the network settings. Version 2.03 allowed the underscore character. Other invalid characters, such as a "-", generate a more meaningful "Device name given is invalid" message.
Removing any underscores eliminates the error and allows settings to be saved.
2 - The upgrade breaks SharePort communications; the SharePort client utility cannot see the USB port on the device after upgrading from 2.03 to 2.07. This occurs with the latest 3.1.0 R 1 Utility (SXUPTP Driver: 3.4.6.0).
Downgrading back to 2.03 is a workaround.
D-Link DIR-655 :: Installed Shareport In Pc And Runs Very Slow
Apr 10, 2012I setup sharePort today and attached an external 1 TB hard drive. Seems that All my internet connections are slow now. I have a seperate PC that I use VPN to connect to work with and suddenly its very slow. My wife said her laptop suddenly slowed down too. The PC that I installed SharePort software seems slow too. Is/can SharePort be dragging down the router? I turned off the external HD and it's still slow.
View 14 Replies View RelatedD-Link DIR-655 :: Shareport On Various Platforms Locks Up After Partial Page Printed
Apr 4, 2012I have an HP OfficeJet J4500 that works fine with shareport on my Win7 x64 computer. the XP and Win2000 ones both have the same "partial page then lockup" problem. when this happens, the only way to disconnect shareport is to reboot the router. It shows connected to the same computer even if I reboot that computer. I started with V1?? from the install disk then tried 3 and finally 4 with no improvement. I have read several posts about this or similar problems. This is the primary reason I switched routers and bought the D-Link DIR-655, for the print server feature...
View 3 Replies View RelatedD-Link DIR-655 :: WPS Registered Printer IP Is 0.0.0.0 / Mac Printer MIA
Dec 8, 2011 I used WPS on my DIR-655 Rev B1 FW 2.03NA to register a Brother HL-2270DW Wifi laser printer and my Mac can never wake it up to print. It always works fine from all my Windows machines.It appears as xxx.xxx.xxx.6 on my network. But the router only shows its IP as 0.0.0.0 on the STATUSWireless page and I can't find any way to change that. My assumption is that the Mac can't find it because of this, but I'm not an expert on WPS.Maybe I should take it out of WPS and just assign it a fixed IP using DHCP Reservation. Or is there another fix? I haven't ruled out the Brother OS X printer driver, but it and the printer's firmware are both up to date.Two odd things:
1. I can ping the printer from my PCs but the Mac can't find see in and it's not a Firewall issue.
2. I can see the brother printer in Finder's Shared devices: so it sees it but refuses to interact.
Cisco :: How To Hookup 2620XM With A 16NM Module
Jun 30, 2012I have a 2620XM router with a 16NM Layer 2 switching module installed,My question is once I get all my VLANs set up on the 16 port switch that I want. Do I need to connect a cable to the fast ethernet port on the router with its subinterfaces setup for routering across the vlans that I choose or can I connect them in the CLI?
View 19 Replies View RelatedAdding Another Computer To Existing Router Hookup?
Nov 24, 2012I am trying to hook a second computer up to run off my belkin router?
View 1 Replies View RelatedPassword Isn't Working For Wireless Router Hookup
Mar 5, 2012my password isn't working for wireless router hookup.
View 1 Replies View RelatedLinksys Cable / DSL :: Hookup ATT DSL Modem With E1200?
Apr 22, 2013I presently have ATT DSL Motorola modem (Model 2210-02-1022) with (1) DSL Green plug, and (2) Ethernet-Yellow in the back of my modem.I have reset the E1200 Router, and tried multiple ways of getting the Wi-Fi to work. This Linksys E1200 belonged to my neighbor, but he recently passed away, and left me all his computer devices.In the Wall phone jack, I have a DSL noise filter as part as a two female plug,
1) for the Green DSL on Modem, and the other
2) to my phone handset. The way I usually plug this in BEFORE this router was this: The green DSL plug from Modem - into phone jack DSL Filter, and the Yellow ETHERNET cord from Router to the back of Computer. I powered on computer, plugged in all cords, except for E1200 power cord, disabled antivirus/security software, I then inserted the Cisco Connect CD and waited , and waited, but it said I was not connected to the Internet. ERROR CODE# 82BD0304. I'm using win7 64 Pro. before i called ATT, I wanted to know if there is an easier way to conect the right cords to the right plugs.
Hookup 614 Router To Netgear 3300 Access Point?
May 30, 2012I tried to use my Netgear 614 router to my Netgear 3300 as an access point to gain range. But now I think I've screwed up the IP address(s) and have lost my wifi ability.
View 7 Replies View RelatedBelkin G Wireless Router / Can't Get It To Hookup To Kindle Fire
Jan 26, 2012I have a wireless connection with my laptop.on a Belkin G router but can't get it to hookup to my Kindle Fire.what do I need to do?
View 2 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8970 - TP-LINK USB Printer Controller Is Causing BSOD?
Apr 12, 2013Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
Print From HP LJ P1006 Wirelessly When Hookup To Netgear N300 Router?
Dec 23, 2012I recently bought a practically brand new HP LJ P1006 with an extra brand new HP brand toner cartridge for $1 at a local auction. I have tested it, and it works perfectly, so all is fine there. I would like to know if it is possible to print wirelessly to it at all. I do not have it hooked up to a computer right now, we only have two laptops, so there is not a desktop to have it hooked up to in order to put it on a home network (I believe that is how that works).
I do have a Netgear N300 router with a USB port however, and I was thinking I may be able to do something there.
Is it possible to hook this printer into my router via USB and then be able to print to it from our latptops? If so, how would we go about setting that up to do so?
Dell :: Centrino 2230 - Bluetooth Not Reliable Wireless Hookup
Apr 2, 2013I have meny concerns but one is intel Centrino Wireless 2230 2X2 bgn + Bluetooth a not so reliable wirless hookup?
View 1 Replies View RelatedLinksys Wireless Router :: Cable Speed Faster Than Direct Hookup E4200?
Nov 8, 2011Have high speed cable and find that the wireless speeds using Speedtest.net are faster than when hooking directly into the E4200. Do I have something set incorrectly?
View 3 Replies View RelatedD-Link DIR-825 :: Cannot Use Wireless Printer With It
Jan 17, 2011I have tried two wireless printers, a Kodak ESP 7 and and Hp 3050. Set them for WPA with the correct security code. The same as my PC and iPad - both of them work fine. The Kodak finds my network but connot connect. The HP returns a "Cannot find printer message". In every other regard my DIR 825 works fine!
View 1 Replies View RelatedLinksys Wired Router :: BEFSR41 Two Wired Routers In Non-standard Hookup
Sep 14, 2011I have a home network with a wired BEFSR41 that, for a variety of reasons, MUST be manually IP configured (DHCP off). All computers and other devices connected to it are manually IP configured. I desire to add a device that cannot be manually configured, and needs DHCP. I therefore need to daisy-chain two routers with the second one DHCP on (and manual IP connection to the main network). The new device needs two-way internet access, but doesn't care if it sees any other current network devices. I've tried several configurations, none seem to work.
View 3 Replies View RelatedNew D-Link Router Won't Connect To Printer?
Jun 8, 2012I used a Belkin router for internet connection and connected to printer via ethernet cable. Belkin had frequent disconnects to internet, so I decided to use my D-Link DIR-655 router from another home. While it works well for internet, it will no longer connect with my printer, either via ethernet or wirelessly. I must carry my laptops to the printer and us a USB cable to get printouts. I am planning on moving to a Verizon 'hot-spot' and eliminate the routers completely soon and will maybe have this same issue. How can I resolve this matter?
View 8 Replies View RelatedD-Link DIR-615 :: Get Router To Recognize Printer?
Mar 21, 2011d-lINK n-300 (DIR-615) Wireless Router HW/Ver: E1, F/W Ver: 5.00NA
I am having a problem with the DIR-615 router seeing my printer on a wired network. The printer is a Brother HL-2170W (also capable of a wireless connection). All other network PC's connect okay. I have attempted both wired and wireless connection procedures that came with the printer with no luck. The DIR-615 router does not see the printers IP address. How can I get the router to recognize the printer?
D-Link DAP-1522 :: Can't Bridge PC Or Printer
Mar 12, 2012I have a WIN XP desktop which I successfully connected to the 1522 AP - as evidence of the GUI to program it. I have the 1522 set to Bridge Mode via the switch on the unit. The 1522 has hardware version B1 and Firmware version 2.000. I joined my wireless network successfully as evidence of the Status page showing it's successfully connected and bridged to my network. I then disabled my USB wifi NIC in hopes of using my hardwired connection to the 1522 to get on the internet.
Wireless Radio : Enabled
Bridge State : Connected
MAC Address : fc:75:xxxxxx
802.11 Mode : Mixed 802.11a, 802.11g and 802.11n
Band Width : 40
Channel : 6
Network Name
(SSID) : cleveland
Wi-Fi Protected Setup : Enabled
Security : WPA2-PSK
D-Link DIR-655 :: Wired Printer Seen But Offline
Jan 2, 2012Just upgrade from an old DIR-524 (or something like that) to a DIR-655. Set up was easy all is working good with the computers. |However, I plugged my HP Photosmart C5100 printer into the router (first slot). The computer seems to know it is there, and the printer seems to recognize the router, but it will not printer. Microsoft diagnostics says that the printer is not ON, and the printer is listed on Devices as Offline. The printer is about 5 years old, but it is a trooper and I don't want to to get rid of it.
View 7 Replies View Related