D-Link DIR-615 :: Get Router To Recognize Printer?
Mar 21, 2011
d-lINK n-300 (DIR-615) Wireless Router HW/Ver: E1, F/W Ver: 5.00NA
I am having a problem with the DIR-615 router seeing my printer on a wired network. The printer is a Brother HL-2170W (also capable of a wireless connection). All other network PC's connect okay. I have attempted both wired and wireless connection procedures that came with the printer with no luck. The DIR-615 router does not see the printers IP address. How can I get the router to recognize the printer?
View 1 Replies
ADVERTISEMENT
Apr 8, 2013
Region : Brazil
Model : TL-WR470N
Hardware version: v2 Firmware version
latest (updated yesterday)
ISP:
My Iphone doesnt recognize my printer (HP Photosmart D110a) when I try to print something from it by AIRPRINT. After updated my printers and routers firmwares, the problem continues. Ive been read a lot and seems that the problem is caused by a problem with IGMP or Multitasking protocol.... But I dont find these in my routers page even after updated my firmware.
View 3 Replies
View Related
Jan 26, 2011
Router will not recognize the printer
View 1 Replies
View Related
May 6, 2011
I've got a small wireless home network that currently has 2 computers - my desktop is running XP Pro, and a laptop that my wife uses running XP Home. I've recently bought a new laptop that is running Windows 7, and although it picks up the wireless feature of the network (it has wireless internet access), I can't seem to figure out how to get this new Windows 7 laptop to see the other PCs or the printer connected to my desktop. I've tried a couple of the "how-tos" online, but I must be doing something wrong. getting my Windows 7 box to see the other PCs and printer on my network
View 3 Replies
View Related
Oct 11, 2012
Region : Belgium
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : 3G mobile
My router TL-MR3420 does not connect to my 3G modem. I did all the steps according to the router configuration. Despite of that, once it is on the status it doesn�t recognize my modem, HUAWEI, model number E1820.
View 5 Replies
View Related
Mar 25, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : aircel,idea
I bought this router just today, but it cant recognize my huawei e303c 3g modem.i've upgraded the firmware. This router supports the dongle or not?
View 2 Replies
View Related
May 10, 2013
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
View 6 Replies
View Related
Mar 14, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Others
Model : TL-MR3220
Hardware Version : V1
Firmware Version : latest
ISP : Orange
The TL-MR3220 takes a long time to identify the 3g modem and sometimes it will not identify it at all and says "unplugged". Sometimes "unplugged" suddenly apears after the modem has been identified and was working properly.Is this the normal behavior of this device ? Why ? What can be done ? I'm Using Alcatel X500D 3g modem.
View 5 Replies
View Related
Apr 9, 2012
I have an old Compaq PC that's running Windows XP SP3 and for quite some time has not had problems with networking or using this wireless adapter. But not long ago the network interface disappeared and the adapter was now being shown in the Device Manager as an unknown device. If you pulled the adapter out and reinserted it you'd get a message on screen that would say something to that effect.
There are two computers next to each other that both use this exact same adapter and I've tried swapping them between the PCs to see if one adapter worked better than another. They both work in one PC and neither work in the PC I'm having trouble with.
View 1 Replies
View Related
Jun 8, 2012
I used a Belkin router for internet connection and connected to printer via ethernet cable. Belkin had frequent disconnects to internet, so I decided to use my D-Link DIR-655 router from another home. While it works well for internet, it will no longer connect with my printer, either via ethernet or wirelessly. I must carry my laptops to the printer and us a USB cable to get printouts. I am planning on moving to a Verizon 'hot-spot' and eliminate the routers completely soon and will maybe have this same issue. How can I resolve this matter?
View 8 Replies
View Related
Dec 2, 2011
Have hooked up a DIR-825 to an iMac and it works well on 2.4GHz band. Having issues seeing 5GHz band as it comes and goes. Just today bought a DWA-160 USB adapter hoping it would connect the kid's PS3 to the 5GHz band but the PS3 wont accept or recognize either the DWA-160 or the 5GHz band.
Can't find any solutions in the manuals.Desperate for a fix as the wife and I want to be able to work on the 2.4GHz without being constantly kicked off by the kids on the PS3.
View 4 Replies
View Related
Jan 22, 2013
I have multiple computers on my network as well as cell phones logging in as wifi. At least once a day I have trouble or another computer has trouble getting on line through my network. I have to unplug my router and replug. Its as if it doesn't recognize the ip address until reboot.
View 1 Replies
View Related
Nov 12, 2012
I have a D-Link wireless router DIR-524( it has 4 LAN ports, no USB port) and i want to connect my USB printer HP Laserjet Pro P1106 to the network. Want to know if that is possible?
View 1 Replies
View Related
Jan 9, 2012
I am trying to setup my printer using the USB port on the router. I installed the share-port utility 32bit and every time i try to connect to the printer from my desktop the computer crashes and i get a blue screen.
View 14 Replies
View Related
Mar 7, 2013
I have a cabled network printer, Xerox Phaser 6125n, that have always worked properly from my 3 desktop computers and my laptop.A few days ago, my old dlink router went dead, and I replaced it with the TP-Link WDR4300 router. Everything worked as usual afterwards, until I found out I could no longer print on my printer. I can access the printers web interface through the ip adress, change settings and such through the browser, but the printer has offline status in windows and print jobs never leaves the print queue in windows. I tried deleting the printer in windows (tried both windows 7 and 8) to reinstall it.
View 7 Replies
View Related
Jan 14, 2012
I need the router's name and can't find it. I've tried every combination I can think of and still no luck. I thought it it might be the SSID but no.
View 1 Replies
View Related
Dec 8, 2011
I used WPS on my DIR-655 Rev B1 FW 2.03NA to register a Brother HL-2270DW Wifi laser printer and my Mac can never wake it up to print. It always works fine from all my Windows machines.It appears as xxx.xxx.xxx.6 on my network. But the router only shows its IP as 0.0.0.0 on the STATUSWireless page and I can't find any way to change that. My assumption is that the Mac can't find it because of this, but I'm not an expert on WPS.Maybe I should take it out of WPS and just assign it a fixed IP using DHCP Reservation. Or is there another fix? I haven't ruled out the Brother OS X printer driver, but it and the printer's firmware are both up to date.Two odd things:
1. I can ping the printer from my PCs but the Mac can't find see in and it's not a Firewall issue.
2. I can see the brother printer in Finder's Shared devices: so it sees it but refuses to interact.
View 7 Replies
View Related
Dec 28, 2010
DGL-4100
-> Wii
-> X360
-> PS3
-> DGS-2205 (gigabit switch in study)
*-> My PC
*-> Her PC
*-> DAP-1522
We're on the 192.168.1.x domain, and I've already hooked my PC up directly to the DAP-1522 and switched its IP address. So now, I can connect to it through the switch. I've renamed it, set it to WPA2 with a passphrase, and should be set to go. However, I can't get my laptop, IPod touch, or any devices to see it. Also, the DGL-4100 doesn't list it under the DHCP clients, but as I've got the DAP-1522 set to a static IP of 192.168.1.50.
View 1 Replies
View Related
May 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
I've been using this router for almost 2 years and it has been excellent but since 2 weeks ago it has stopped recognizing anything connected to the LAN port 1 and the WAN port, so it becomes useless as a router because I cannot connect a cable modem. The cable modem was tested successfully with a direct connection to a computer but it doesn't work with the router, and also ANYTHING you connect to these ports on the router is not detected, the lights do not turn on.
View 3 Replies
View Related
May 31, 2011
When installing the DIR-615, router installs, but error msg that there is no internet connection. SmartConnect is plugged into the WAN and I have tried the ethernet cable to the computer in spots 1 & 2. Good connection when SmartConnect modem is connected to computer directly.615's Internet indicator will turn green for a while, usually less than a minute or two, then flashes, then may actually cause the routers status indicator to flash off, then back on. Like a reset.
View 2 Replies
View Related
Sep 18, 2011
I just bought a WRT54GL which is working perfectly. I needed it to extend my home network for my kids (I have not a very fast internet connection and my kids are eating all of it... With the WRT54GL I can choose how much they can have. So my own network has a netgear modem and a netgear wifi access point which is in this network : 192.168.0.x.
This network is not blocked in any way (just password protected). For my kids network, the WRT54GL gives addresses in this network : 192.168.1.x and is limited in speed. Everything is perfect, I have internet connection on both of my network, There is just the problem that I cannot access my printers, my servers, my computers.... that are on the 192.168.0.x network from 192.168.1.x. Is there a solution ? I already tried to force the WRT54GL to go to 192.168.0.x network but no more connection. Should I "bridge" the two networks ? How can I do it ?
View 1 Replies
View Related
Jan 27, 2013
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
ISP : Centurylink
I am replacing my qwest/centurylink actiontec q1000 with the td-w8960n. I have run all the different setups, with the different settings that I have found on the net but to no avail. The one thing I have noticed is that the light for the asdl on the td-w8960n does not come on, but yet when I plug it back into the actiontec it sees it and the internet works. Any reason why the td-w8960n is not recognizing the active dsl line?
View 6 Replies
View Related
Jan 22, 2013
Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : UPC Hungary Ltd.
I can't able to recognize a system - all wifi clients lose connection. When this happens, the ping answer time rech the ~2000 times, then totally lose the connection, the SSID is dissapear - checking with my phone (android - wifi analyzer) and TL-WN822N USB wifi adapter (with the inSSIDer application). Meanwhile the cable clients and the WAN connections works fine, didn't experience anything.If I restart the wifi service with the hardware on/off button, it runs well for some time.This problem appeared when I used the two older official firmware too.
I tried the auto-chanel function width auto channel width, tried to manually set up one of the less interfered channels with both 20MHz and 40MHz channel width, but none of them bring the solution.The intresting thing is, if I change the router with an old D-Link DI-604, the signal is weak, but the wifi connection is stable, with the same TL-WN822N adapter.I tried to guarantee the router, but after two weeks, my reseller said, it looks ok, they - at the TP-Link service - didn't find anything.
View 7 Replies
View Related
Apr 12, 2013
Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
View 1 Replies
View Related
Nov 26, 2012
I can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7
View 11 Replies
View Related
Apr 11, 2012
My belkin router F7D4401 is not being recognize by my desktop whereas i can connect to the same without a problem using my laptop. The belkin router management software shows the router as connected when i joined it my laptop but the desktop always says not connected.
View 5 Replies
View Related
Sep 2, 2011
my computer wont recognize my router and i lost the cd, what do i do
View 1 Replies
View Related
Jul 23, 2011
My computer suddenly doesnt recognize my router.it recognizes othrer routers, and my other PC's are recognizing the router.the router is located very close to the PC, and no other electronic devices located near by.
View 2 Replies
View Related
Mar 18, 2013
My Dell destop with Windows 7 all of a sudden doesn't seem to recognize my router, yet my laptop works fine (which I'm using now). After reading other posts, I reset the router with no results, used a new cable from the Belkin to the computer, changed ports, checked connections, restarted; nothing. When I do an ipconfig, a small window pops open and goes off before I can make anything out. I undestand Belkin's IP address is 192.168.2.1 and I'm showing that my IPv4DHCP Server is that, as is my DNS server. The IPv4WINS server shows nothing.
View 9 Replies
View Related
Jun 12, 2012
I just moved into a new apartment and inherited a former roommates internet set up. Our router was infected with DNSchanger, so I sought to reset the router and update the firmware. I reset the router and it no longer recognized the internet connection. I can connect when plugged directly into the modem, but the router doesn't recognize the internet connection. Below is my ipconfig/all log:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersREDACTED>ipconfig/all
[Code].....
View 4 Replies
View Related
Jan 17, 2011
I have tried two wireless printers, a Kodak ESP 7 and and Hp 3050. Set them for WPA with the correct security code. The same as my PC and iPad - both of them work fine. The Kodak finds my network but connot connect. The HP returns a "Cannot find printer message". In every other regard my DIR 825 works fine!
View 1 Replies
View Related
Aug 19, 2011
I have a Speedstream 4300 modem in bridge mode and a linksys WRT54G2 router set to PPPoE like I was instructed. On the status page of my router underneath the PPPoE setting it has IP, Subnet Mask, and Gateway all set to 0. The only advice I was able to obrain from my ISP was to powercycle the router and modem, which I did and no change.
View 1 Replies
View Related
Jan 11, 2012
recently my internet got disconnected, they reconnected my internet configured my modem when i tried to connect my router ,it would connect to my comp but it said there was no internet. I reset it to factory settings via ip address and then threw the button on the router when i installed software it keeps saying that the router cannot recognize the internet and i should contact my internet provider, but my internet is working when i connect it to the comp directly?
View 4 Replies
View Related
