PC Can't Recognize Router?
Nov 26, 2012
I can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7
View 11 Replies
ADVERTISEMENT
Jan 26, 2011
Router will not recognize the printer
View 1 Replies
View Related
Apr 11, 2012
My belkin router F7D4401 is not being recognize by my desktop whereas i can connect to the same without a problem using my laptop. The belkin router management software shows the router as connected when i joined it my laptop but the desktop always says not connected.
View 5 Replies
View Related
Sep 2, 2011
my computer wont recognize my router and i lost the cd, what do i do
View 1 Replies
View Related
Mar 21, 2011
d-lINK n-300 (DIR-615) Wireless Router HW/Ver: E1, F/W Ver: 5.00NA
I am having a problem with the DIR-615 router seeing my printer on a wired network. The printer is a Brother HL-2170W (also capable of a wireless connection). All other network PC's connect okay. I have attempted both wired and wireless connection procedures that came with the printer with no luck. The DIR-615 router does not see the printers IP address. How can I get the router to recognize the printer?
View 1 Replies
View Related
Jul 23, 2011
My computer suddenly doesnt recognize my router.it recognizes othrer routers, and my other PC's are recognizing the router.the router is located very close to the PC, and no other electronic devices located near by.
View 2 Replies
View Related
Mar 18, 2013
My Dell destop with Windows 7 all of a sudden doesn't seem to recognize my router, yet my laptop works fine (which I'm using now). After reading other posts, I reset the router with no results, used a new cable from the Belkin to the computer, changed ports, checked connections, restarted; nothing. When I do an ipconfig, a small window pops open and goes off before I can make anything out. I undestand Belkin's IP address is 192.168.2.1 and I'm showing that my IPv4DHCP Server is that, as is my DNS server. The IPv4WINS server shows nothing.
View 9 Replies
View Related
Jun 12, 2012
I just moved into a new apartment and inherited a former roommates internet set up. Our router was infected with DNSchanger, so I sought to reset the router and update the firmware. I reset the router and it no longer recognized the internet connection. I can connect when plugged directly into the modem, but the router doesn't recognize the internet connection. Below is my ipconfig/all log:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersREDACTED>ipconfig/all
[Code].....
View 4 Replies
View Related
Oct 11, 2012
Region : Belgium
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : 3G mobile
My router TL-MR3420 does not connect to my 3G modem. I did all the steps according to the router configuration. Despite of that, once it is on the status it doesn�t recognize my modem, HUAWEI, model number E1820.
View 5 Replies
View Related
Aug 19, 2011
I have a Speedstream 4300 modem in bridge mode and a linksys WRT54G2 router set to PPPoE like I was instructed. On the status page of my router underneath the PPPoE setting it has IP, Subnet Mask, and Gateway all set to 0. The only advice I was able to obrain from my ISP was to powercycle the router and modem, which I did and no change.
View 1 Replies
View Related
Mar 25, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : aircel,idea
I bought this router just today, but it cant recognize my huawei e303c 3g modem.i've upgraded the firmware. This router supports the dongle or not?
View 2 Replies
View Related
Jan 11, 2012
recently my internet got disconnected, they reconnected my internet configured my modem when i tried to connect my router ,it would connect to my comp but it said there was no internet. I reset it to factory settings via ip address and then threw the button on the router when i installed software it keeps saying that the router cannot recognize the internet and i should contact my internet provider, but my internet is working when i connect it to the comp directly?
View 4 Replies
View Related
Jun 5, 2012
we have tried updating the firmware, restarting the modem, etc.We are looking to connect our 2 TB WD My Book to our E4200 to share amongst the network to various gaming systems and computers , When we go to storage it says "USB Device is not Supported"
View 1 Replies
View Related
Mar 6, 2013
I had a Sony 8gb usb drive plugged in and was working great with my smart tv and computer..... over last weekend i unplugged the drive and had to format it to my xbox moved what i need to and hen i formatted it back to ntfs the router wont recognize the usb drive. during this i also was facing this bad gateway error 502...i downgraded my router and now using the classic but i still get a non recognizable device error.
View 1 Replies
View Related
Mar 20, 2012
How do i enable my desktop computer to recognize my wireless router using the Ethernet port
View 1 Replies
View Related
Feb 6, 2011
When setting up Belkin fF5D8235-4 v2 router it will not recognize the Speedstream 4100 modem. Is there a fix for this?
View 1 Replies
View Related
Sep 11, 2011
E4200 does fail functionality on 2 area's:
- 1) Media Streaming Server
- 2) NAS supporting modern USB devices, which register with multiple personalities/devices in one physical USB device.
1) Is already known by Cisco and hopefully the choose to fix it properly
2) Must be known now. Multiple users are reporting this lack of support.
NAS functionality of E4200 does not work/ gives problems with:
- Toshiba StorE Alu 2S USB 3.0, 1 TB disk. PN: PA4239E-1HJ0
- Iomega eGo 1 TB USB 3.0, (black casing) , PN 31924500, RPHD-UG3
Both drives report themself with 2 devices under Windows 7: 1x USB storage decive + 1x CD readonly device?
View 4 Replies
View Related
Nov 8, 2012
1TB harddisk partitioned into 2, an HFS+ and an exFAT. Could the exFAT partition be the reason? But I do have an HFS+ partition and it's the 1st partition on this disk.
View 1 Replies
View Related
Oct 5, 2012
Ok this is the send router this has happened to but anyway after a power blink the router no longer recognizes that i have a modem connected to it no matter how many times I reboot both of them it can't recognize that i have a modem connected i know it is not the modem because i'm using it to type this right now directly connected to my desktop
I have windows 7
Linkysy E4200 V1
Century link DSL modem 660 series
View 9 Replies
View Related
Dec 15, 2011
I cannot get my Toshiba Thrive to recognize my router (wrt-1209) or the other way around. I am able to get on a neighbors non-secure network immediately. No problem with the other wi-fi connected computers on my network.
View 1 Replies
View Related
Nov 29, 2011
Model E1000
I wrote down the password of my wireless router on installing it. However, each time I want to add a new device to the router, the password that I wrote down does not prompt the router to recognize the new device or equipment. How do I go back into my computer and retrieve the password to my router if I did copy it down wrongly? how to retrieve the password.
View 2 Replies
View Related
Mar 3, 2012
I bought a Wireless-N Home Router MODEL WRT120N so that I could use my new Kindle Fire online, since I could never catch an open wi-fi signal in my house. Router IS correctly installed and working fine.....but when I go to use my Kindle, I see it on the list, click on it, enter my password.......and it tells my my password must be incorrect. I KNOW it is correct! I even went and CHANGED the password just in case!
My Kindle keeps giving the message "Unable to connect to the selected Access Point. Please check the password you have provided."
View 8 Replies
View Related
May 10, 2013
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
View 6 Replies
View Related
Mar 20, 2012
How do i enable my desktop computer to recognise my wireless router using the ethernet port
View 2 Replies
View Related
Mar 14, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Others
Model : TL-MR3220
Hardware Version : V1
Firmware Version : latest
ISP : Orange
The TL-MR3220 takes a long time to identify the 3g modem and sometimes it will not identify it at all and says "unplugged". Sometimes "unplugged" suddenly apears after the modem has been identified and was working properly.Is this the normal behavior of this device ? Why ? What can be done ? I'm Using Alcatel X500D 3g modem.
View 5 Replies
View Related
Oct 20, 2012
I have a WRT54GS V7 that I have been running for a few years now with no problems until today.My wife used the internet from her laptop through the day but this evening after she moved to the bedroom and booted up the laptop, she found there was no internet connection. I tried what I know in cases like these, unplugging the router or modem for brief periods of time to try and get things going again but to no avail. So I tried using the Easylink Advisor which basically suggested the same process.
At this point, my internet connection is coming in from the cable just fine. I have access on the desktop which is wired and works with no problems. The modem and router lights are both signaling that everything is fine but no wireless internet coming from the router.
Using the desktop I tried looking for some solutions and tried resetting the router. I ultimately called customer support but being out of warranty they wanted too much although she suggested that I needed to reconfigure the router since I had reset it. I followed the online instructions for reconfiguring but still have gotten nowhere.
View 1 Replies
View Related
Jan 28, 2012
I am unable to get my E2000 router to recognize my Ipad2 when trying to connect.
View 2 Replies
View Related
Feb 18, 2012
Whenever I try to set up a security code for any of the settings (WEP/WPA etc), as soon as I hit save my computer does not recognize it and I get kicked off the internet and have to restart my router. I have the Linksys model number WRT160N V3
View 2 Replies
View Related
Jan 19, 2013
I have Linksys E3000 Router and it is connected to 7 Devices at this moment via DHCP. I have got New NAS Enclousre (8th Device) which has got Lan port . I have connected Box to One free Port on E3000 Router. I see DHCP Reservation from 192.168.0.1 assging one IP to My NAS Enclosure Box i.e 192.168.0.13 But when i ping that box . It's not pingable. When i try to browse that NAS Enclosure's setup web page - it's not opening. I can access that box setup page if i connect direct 1:1 Lan cable over private network (169.254.XXX). It means web server is runing on box. I am clueless. E3000 is assigning IP to NAS Enclosure but can't Browse or Ping. I tried to Assign Manual IP address to NAS enclusure and reconnect to router. Still I can't ping or browse.
#arp -a show that box has IP. (Output from MAC os) .
? (192.168.0.13) at (incomplete) on en0 ifscope [ethernet]
Ping test from Router Page.
PING 192.162.0.13 (192.162.0.13): 32 data bytes
40 bytes from 192.162.0.13: icmp_seq=0 ttl=46 time=286.6 ms
40 bytes from 192.162.0.13: icmp_seq=1 ttl=46 time=290.2 ms
[code]....
View 9 Replies
View Related
Mar 12, 2011
Set up our E3000 following the set-up guide. However, wireless devices (laptop, iPhone) recognize the network, but cannot connect. There's no prompt for a password or anything.
View 6 Replies
View Related
Apr 18, 2011
I have a 3825 router running 12.4t IOS. I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it. Is this the right card for this router? Is there anything I can look at to determine the issue? I think the router only has 32M RAM. Below is a show hardware. Card is still currently installed.
View 2 Replies
View Related
Jan 15, 2012
One moment the laptop was using the wireless connection from the router in our house and the next it lost internet access and then wasn't able to recognize the SSID or connection at all on the available wireless connections. We have reset the router and restarted the laptop countless times yet the only internet access we have is on the computer the router is hooked up to.The wireless connection works neither on the laptop nor the Wii, both previously works merely hours ago and with no problems until now.We assume there is an issue with the router itself, whether it be a loose ethernet cord (which only faintly can be moved in its place).It's almost as if the router is stopping them (Wii, and laptop) from having access. When we explore the wireless internet properties on the laptop, it shows the wireless connection, yet only there and doesn't give access to it. Could it be the router, or could the company have restricted WiFi only to the computer it is hooked up to?
View 1 Replies
View Related
Feb 15, 2012
I am running windows xp sp2 on a pc, a wireless modem 2wire model 2701hg and a laptop with windows vista. My pc had a virus that required reinstalling windows xp. When I did that my pc came up with an ethernet connection instead of reconnecting into the wireless network. I cannot get the pc back into the wireless network with the limited knowledge I have. When I look at my "system summary" on the 2 wire website I can see my pc listed twice, once with the ethernet connection and once with the wireless connection but labeled "inactive". How do I get my pc back onto the wireless network?
View 12 Replies
View Related
