Linksys Wireless Router :: E4200 Fails To Connect / Recognize USB 3.0

Sep 11, 2011

E4200 does fail functionality on 2 area's:

- 1) Media Streaming Server

- 2) NAS supporting modern USB devices, which register with multiple personalities/devices in one physical USB device.
 
1) Is already known by Cisco and hopefully the choose to fix it properly
 
2) Must be known now. Multiple users are reporting this lack of support.

NAS functionality of E4200 does not work/ gives problems with:

- Toshiba StorE Alu 2S USB 3.0, 1 TB disk. PN: PA4239E-1HJ0

- Iomega eGo 1 TB USB 3.0, (black casing) , PN 31924500, RPHD-UG3
 
Both drives report themself with 2 devices under Windows 7:  1x USB storage decive + 1x CD readonly device?

View 4 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 Fails To Connect To USB Storage

Jan 11, 2012

I got E4200 with latest firmware (updated two days ago) and WD Studion with 2 Tb drive (it is HFS+ file system)Once I connect this drive to router I am not longer available to access 192.168.1.1.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Will Not Recognize WD Book 2TB

Jun 5, 2012

we have tried updating the firmware, restarting the modem, etc.We are looking to connect our 2 TB WD My Book to our E4200 to share amongst the network to various gaming systems and computers , When we go to storage it says "USB Device is not Supported"

View 1 Replies View Related

Linksys Wireless Router :: E4200 Doesn't Recognize Modem

Oct 5, 2012

Ok this is the send router this has happened to but anyway after a power blink the router no longer recognizes that i have a modem connected to it no matter how many times I reboot both of them it can't recognize that i have a modem connected i know it is not the modem because i'm using it to type this right now directly connected to my desktop
 
I have windows 7
Linkysy E4200 V1
Century link DSL modem 660 series

View 9 Replies View Related

Linksys Wireless Router :: E4200 Internet Connection Fails

Jan 1, 2013

I have a E4200 V1 with firmware 1.0.0.5 installed The problem is that when I connect the cable from my modem to my router and recycle both I get a rapidly fashing Cisco light and can not connect to the internet.If I remove that cable and recycle the router my network works but (obviously) I have no internet connectivity.This was working (almost 2 years) without issue until today.I updated the firmware and did a factory reset and neither resolved the issue.My next experiment is to see if I can't get log files (since the factory reset) but I can't do that at this time.

View 3 Replies View Related

Linksys Wireless Router :: E4200 (firmware 1.0.03) Fails To Renew IP Address

Dec 1, 2011

After an indeterminate period my E4200 (firmware version 1.0.03) stops renewing the Internet IP address. This happens in both router mode and bridge mode.In router mode the E4200 is set for DHCP and connected to the cable modem, in bridge mode it is connected to a Dell switch  with DHCP being provided by my Win2008R2 server.It appears that the device stops recognizing the existence of the Internet port - no lights come on when a cable is plugged in - whether connected to the cable modem or my Dell switch. Plugging the same cable into one of the 4 lan ports and that port lights up immediately (i.e. it is not a patch cable problem).If the E4200 is left switched off for some time (possibly days) it will work properly again for a while.

View 6 Replies View Related

Linksys Wireless Router :: E4200 Guest SSID Login Page Fails?

Jan 25, 2011

Config:

Netgear ProSafe Gigabit Router is my DHCP Server -- The entire home net work is on the same subnet (192.168.15.xxx)
Linksys E4200 configured as an access point ONLY -- wired connection -- static IP assigned -- DHCP server turned off
Linksys WRT610N configured as an access point ONLY  -- wired connection -- static IP assigned -- DHCP server turned off

3 -- 5 port gigabit switches
1 -- 8 port gigabit switch

No more than two switches between any two wired devices Both Linksys access points have the same SSID and WPA2 security phrase -- total of 4 radios Nonoverlapping channels are selected on both the 2.4Ghz and 5.0Ghz radio to minimize interference All computers are running Windows 7 Professional 64bit with all the latest updates Two iPhones and one iPad also access the network All LAN and WAN connectivity is working as designed? 

Problem: 

guest SSID is turned on

password is established 

All devices will connect to the guest SSID and the E4200 is assigning an ip address to the device in the 192.168.33.xxx range which is what it's supposed to do.When I open a web browser, I am not automatically redirected to the Cisco Login Page. If I enter 192.168.33.1 as the URL, the login screen is presented. I enter the password I have created in the guest admin page on the wireless guest tab.  I then see a blank page and a URL of 192.168.33.1/guestnetwork.asp. THIS IS WHERE I GET STUCK. THE ONLY WAY TO EVER SEE THE LOGIN PAGE AGAIN IS TO REBOOT THE E4200, otherwise you just get unable to connect messages when opening web browsers and the wireless status icon in the system tray shows a yellow exclamation mark.

I successfully connect to the guest SSID but I do not get access to the internet. When I type ipconfig, I see that the DNS is set to 192.168.33.1 which does not exist on my network. I assume there's some internal NAT magic that is supposed to happen in the E4200 to bridge me over to my 192.168.15.xxx network but it doesn't seem to be happening.At the beginning of the call I specifically asked them if the E4200 must be the DHCP server in order for the guest SSID feature to work and they said no. 1.5 hours later they had no answers so they told me that it wasn't working because the E4200 was not the DHCP server. The documentation says nothing about a DHCP requirement for guest AP service. Linksys support further could not answer what you would do if you needed more than one AP with guest service enabled.It seems like this is a firmware issue but it may be the guest SSID service requires the E4200 to also act as the DHCP server. Whether this is a bug or if the router/AP is working as designed?

View 9 Replies View Related

[Linksys Wireless Router :: Unable To Get E2000 To Recognize IPad2 When Trying To Connect

Jan 28, 2012

I am unable to get my E2000 router to recognize my Ipad2 when trying to connect. 

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Laptop / IPhone Recognize Network But Cannot Connect

Mar 12, 2011

Set up our E3000 following the set-up guide. However, wireless devices (laptop, iPhone) recognize the network, but cannot connect. There's no prompt for a password or anything.

View 6 Replies View Related

Linksys Wireless Router :: E3000 Setup Fails To Even Connect At All?

Apr 17, 2010

I have comcast Triple HD cable internet and I have been using a low end 5 year old Linksys Router.  I decided to upgrade and get the E3000.  So far I have had no luck at all getting it to work.  Setup fails to even connect at all.  I spent 2 hours on the phone with tech support.  There were in trying to get it up and running but we have been unable to get a TCP/IP number from my provider (comcast).  I hooked up the old router to see if any of my settings looked unusual but they seemed normal.

View 9 Replies View Related

Linksys Wireless Router :: Squeezebox Duet Fails To Connect To 1500

Mar 19, 2012

 I have a new Linksys 1500 router which I am using to replace an older WRT54GS.  They are connected to a wired router (BEFSR81) to allow a wireless network to work in conjunction with my wired one.  The WRT54GS ran as an access point.  The 1500 does not seem to have that option.  I have successfully been able to set up the new router and use it with laptops, ipads, etc.  Where I’m running into problems is with my Squeezebox.  Although I can see the network and enter a passcode into the Squeezebox, it never connects (the light on the Squeezebox is green (acquiring IP address from network).  It never gets beyond this point.  I have tried: Disabling securityChanging mode from mixed to various optionsDisabling firewallsNothing seems to work

View 4 Replies View Related

Linksys Wireless Router :: E1200 Fails To Connect To Frontier FIOS Internet?

Jan 3, 2012

I am trying to set up my E1200 router to Frontier FIOS internet. I went thru the setup and it failed to connect to the internet. What settings do I need? Frontier says that it should find the connection automatically.

View 1 Replies View Related

Linksys Wireless Router :: Connect E4200 To A Mac Via Afp?

Mar 14, 2011

How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.  

View 3 Replies View Related

Linksys Wireless Router :: New E4200 Will Not Connect

Nov 29, 2011

I just connected my new E4200 router, it worked fine until it recommended updating, as soon as it connected to do this, the power light started blinking every second and it will no longer respond. Support has not facilitate.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Powered On But Can't Connect

Feb 19, 2013

I've had this router for just over a year now so the warranty is out and it just so happened to stop functioning last night. I'm fairly decent in the router world since I am studying for my CCNA, so I have tried just about anything imaginable. I woke up this morning with no connection, checked the modem, then the router. The router was powered on, but the up/downstream lights were not doing a thing. The modem is not the issue (I am hardwired as of now). I have tried both resets, including unplugging the device, and still can't get a response out of it. The logo light will turn straight on (no fad in and out like it's suppose to) and then it does absolutely nothing.  I have never encountered this sort of problem on a home router before. I can't login to the router either.

View 5 Replies View Related

Linksys Wireless Router :: How To Connect To A E4200 That Is Bridged

Dec 10, 2011

I have 2 E4200's . One is connected to my ADSL Modem as DHCP and the other one is Bridged to the DHCP. I'm trying to connect to my E4200 that is set as Bridged. I am able to connect to my E4200 that is set as DHCP, but I cannot connect to the E4200 that is connected to that DHCP as Bridged.
 
How can I connect to that bridged E4200 because I want to upgrade the Firmware of the Bridged E4200?.

View 1 Replies View Related

Linksys Wireless Router :: E4200 V2 Can't Connect With WGA54G V2 Using WPA

Aug 26, 2012

Been having problems connecting an old WGA54G v2 (firmware 1.16, March 29, 2005) to a new E4200 v2 (firmware 2.0.36) via WPA.  I can get the two to connect using no encryption or WEP but not WPA.  Using WEP is not an option for me,E4200 v2 wireless settings:

1. 5GHz broadcast is off, 2.4 GHz is on.
2. Network Mode - Mixed
3. Security Mode - WPA2/WPA Mixed Mode
4. Channel Width - Auto
5. Channel - Auto
6. Guest Access broadcast is off
 
WGA54G v2 settings:

1. SSID - same as router
2. Network type - Infrastructure
3. Security - enabled
4. Pre-shared key - same as router
5. Encryption - WPA Pre-shared Key, TKIP (tried AES, but still no connection)
 
Also, tried different WPA network modes on the router (Mixed, WPA personal, WPA2 personal etc.) to no avail.  Switched between mixed, B and G network modes as well on e4200 v2 but still no connection. My guess now is that the WPA on the gaming adapter and the WPA on the router are just not compatible, as completely asinine as that sounds.  Thought about updating firmware on the WGA54G v2 but checked in the download section here and the last firmware available is 1.13 (appears older than my 1.16, even though the 1.13 release date listed is a month after my 1.16).

View 4 Replies View Related

Linksys Wireless Router :: E4200 Cannot Connect With Wired LAN

Sep 27, 2011

I have this E4200 for about 3 months and allways has been used as an wireless router. Today i wanted to connect 2 wired computers to it via lan and whatever i do dosnt connect. Dosnt even let me acces the 192.168.1.1 page to router settings.I am on firmware 1.0.02, i also did a full reset and then did set up  with cisco connect, did try that thing with the cisco usb connect and still no joy with the LAN conection.
 
One comp  uses win 7 the other is on win xp. I can connect both comps succesfully to other router via the gigabit ports but not to this one.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Won't Connect Beyond 144mpbs

Jul 14, 2011

On the 2.4ghz side, I'm set up on the cleanest channel (per inssider) which is 6, channel width is auto (although I've tried it fixed at 20 also), N-only, and security is WPA2 personal.  WMM support is enabled.  I'm running firmware 1.0.02 The laptops continually stay around 72mpbs, occasionally jumping to numbers in the 100 range... twice I saw it actually hit 144.  Inssider shows the max rate as 144, while other N networks in range are as high as 270.  I'm sitting right next to the router with 5 bars -- why is the max rate 144?  Why won't it run at 300?

View 9 Replies View Related

Linksys Wireless Router :: Netbook Can't Connect To E4200

Feb 27, 2011

So I purchased a Linksys E4200 a couple weeks ago from Best Buy (got the $149 price) and finally got around to setting it up last Thursday. Before I get to my problem, I am happy to say that I have not experienced the "blinking light" syndrome that seems to plauge a number of other owners. In fact, the E4200 is everything I hoped it would be ... except for one problem. I cannot get my sister's Acer Aspire One netbook to connect to it.
 
It's really strange actually; the netbook picks up the 2.4GHz SSID fine (it's set to mixed mode) and upon selecting it and I input the WPA2-Personal password no problem. Then, it takes forever to finally aquire a network address, like at least 3 full minutes (usually this process takes a few seconds). After that, it tells me it is connected to the network with excellent signal strength. Except, despite it saying it's connected, the Internet does not work at all. If I got into the details of the wireless adapter, it tells me that the router/network failed to give the adapter a network address.

[code]...

View 9 Replies View Related

Linksys Wireless Router :: Can't Connect To Steam With E4200

Jul 30, 2012

after setting up my e4200, I am no longer able to connect to Steam, I instantly get a connection error. I'm told it should work fine with UPNP, and I've even forwarded the proper ports just in case, but I cannot connect. I have latest firmware. Hoping someone else out there has same router and uses Steam. 

View 6 Replies View Related

Linksys Wireless Router :: Use Cisco Connect Or Web For New Set Up Of E4200?

Jul 26, 2011

1. I will be getting a e4200 on Thursday and was wondering if there is any advantage/disadvantage to using the Cisco Connect or just following instructions for manual setup using the web (I did it that way on my last router 6 years ago but was just following a script).?

2. Can I change things using the web after setting up using Cisco Connect or do I have to always use it:?

3. Finally after I set the router up can I just set up  other computers in the house as I do  now (just plug them in using wire or search for wireless and put  in password)?

View 7 Replies View Related

Linksys Wireless Router :: E4200 Won't Connect To Panasonic TV

Mar 12, 2012

I've switched over from a d-link dir-655 router to the v1 4200. I've been playing around with the 4200 and trying to get it connected to my tv all night long. I have two laptops and two iphones connecting with no issues. I cannot for the life of me get the tv (GT30) to work. It picks up three signals, the 2.4 signal, the 5 signal and the guest signal. The only one that will even connect to the internet is the guest signal. When I run the connection test, however it will not connect to the vierra connect server. I've tried setting it up manually, and anything else that seems obvious. I had no issue with the dlink router at all.

View 1 Replies View Related

Linksys Wireless Router :: Could Not Connect To (E4200-V2) Manager

Jun 1, 2012

Router: E4200-V2
Firmware: 2.0.37
 
Just bought E4200-V2 and happy with the performance, except one thing.After several hours, I could not connect to the router manager both from "Cisco Connect" nor browser.I could resolve this by turn off the router and turn on again, but the same problem will be back after several hours.I tried to reset the router (reset 30 and reset 30/30/30) several times but have no luck.

View 5 Replies View Related

Linksys Wireless Router :: E4200 - Cannot Connect To Default GW 192.168.1.1

Apr 15, 2013

I've noticed that my 192.168.1.1 login console was slow loading up on my E4200 V1. The router functioned just fine(wireless and wired). These past few days I tried to log in to set some DNS settings and I cannot access 192.168.1.1.I have tried via wireless and wired. The router powers on still seems to function but won't allow me to load up the admin console page.To my last resort, I held in the tiny reset button and the router seems to have went back to it's default settings (SSID = Cisco#####) but I cannot connect to it. what I can try to get back into the management window.I was able to manage everything from my laptop about a month ago or so, but now I can't do anything.

View 9 Replies View Related

Linksys Wireless Router :: Laptops Can't Connect Through Wi-Fi With E4200

Mar 11, 2012

I have set up my WAG320N with my E4200v1 successfully. The problem is that my laptops can't connect through WiFi with the E4200 router, but only with the WAG320N (wireless). Since it is the first time I set up a network alone I possible have made mistakes and that's why I can't connect to my router wirelessly. My desktop pc will successfully connect to both of my routers (wired)! My devices won't (DS,Laptops). I have WEP security in my WAG320N (because this is the only one my DS card can connect to) and in my E4200 I want to use WAP2 to connect my 2 laptops. I have made nothing more than setting them up and both of my evices are new.
 
It is for home use, both of my devices are updated to their latest firmware and the laptops won't identify the problem and will ask to restart the router. (I did many restarts both on my routers, PC, laptops)

View 1 Replies View Related

Linksys Wireless Router :: E4200 / How To DMZ Xbox With Cisco Connect

Dec 21, 2011

I got the new E4200 router as I had issues with my old router. I was able to DMZ my console with the old router. But with my new router my xbox IP has changed and I want to know which numbers to use and how to DMZ my Xbox with Cisco Connect.

View 7 Replies View Related

Linksys Wireless Router :: E4200 Won't Connect With WET610N Via N After 1.0.04 Update

Apr 28, 2012

After I updated my E4200 V1 with the 1.0.04 update I am unable to connect my WET610N to it with 802.11N. I can connect fine with 802.11G. I tried the Site Survey method of pairing them as well as manual. When it fails it goes through the minute timeout of trying and then Link Status is disconnected. I have anything from phones to laptops connect to the E4200 with wireless N, its just the WET610N that doesnt want to pair.
 
Before I was running the following:

E4200 V1 1.0.03
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11N 
  
After I was running:

E4200 V1 1.0.04
WET610N V1 1.0.05
Connection between them: Bridged, WPA2 Personal, 802.11G

View 2 Replies View Related

Linksys Wireless Router :: E4200 Unable To Connect VPN Wirelessly

Aug 23, 2011

I'm using E4200 with latest 1.0.02 firmware and found I can not connect to VPN with my iPhone4 by WiFi.Googled a bit and found it's a common problem for Cisco routers when wireless devices can not connect to VPN but wired ones connects with no problems.\

View 3 Replies View Related

Linksys Wireless Router :: E4200 Doesn't Connect To Internet

Jul 9, 2011

I have a Motorola Docis Surfboard model Model SB6120 and can connect to the internet with the ethernet cable directly onto the labtop but if I connect it to the E4200 router the range is there but the internet connection is not.  This happened 2 days ago and can't get the router to work.

View 4 Replies View Related

Linksys Wireless Router :: How To Connect E4200 Media Server

Jul 17, 2011

Connecting E4200 media server (external hard drive connected to USB in router) to PS3.mapped External HD to media server folder. and enabled UPnP Media Server. after trying all options I can't see media server in PS3.

View 6 Replies View Related

Linksys Wireless Router :: Installing Cisco Connect For E4200?

Jul 28, 2011

I just got a new E4200 router and downloaded Cisco Connect from the web site...file name CiscoConnect.E4200.1.4.11160.2.exe. When I try to run it, I find through Task Manager that Setup.exe is using about 35 to 40% CPU, but I'm never even getting to anything on the screen, nor is Task Manager even showing it as a running application. I'm running Windows XP SP3 (latest updates). I tuned off the AVG virus scan. But it still just seems to hang. BTW, I used the web interface to fully configure the router and it works fine so I could get by without Cisco Connect, but it might just be easier to use.

View 4 Replies View Related

Linksys Wireless Router :: Connect Seagate USB Drives To E4200?

Dec 3, 2011

Is there any way to connect a Seagate USB drive to the E4200.i have 2 USB portables and 1 USB with power cable, none of them seem to be recognized by the router

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved