Cisco WAN :: 3825 Installed DSU / CSU Part Number HWIC-1DSU-T1 In Router / Doesn't Recognize
Apr 18, 2011
I have a 3825 router running 12.4t IOS. I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it. Is this the right card for this router? Is there anything I can look at to determine the issue? I think the router only has 32M RAM. Below is a show hardware. Card is still currently installed.
View 2 Replies
ADVERTISEMENT
Apr 1, 2012
I just installed two of the HWIC-1GE-SFP cards in the CISCO3945 router but they are not recognized... I don't see any messages on the console output. I don't see them in the "show diag" command. I don't see new ports in the "show run" either... Is there some command I need to put in to activate them? Here is show version of my router:
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[Code]....
View 1 Replies
View Related
Aug 4, 2011
We are currently moving from 1841 (EOL) to 1921/1941 routers. According to the module support doc [URL] this HWIC-1DSU-56K4 card is supported. We have tried both the 1921 and 1941 with the cards without any luck.
IOS Verison: c1900-universalk9-mz.SPA.152-1.T.bin
System Version: 15.0(1r)M9
Boot Error: %MAINBOARD-1-UNKNOWN_WIC: wic card in location 0/1 has an unknown id 0xB
Show Diag:
WIC Slot 1:
DSU 56K
WIC module not supported/disabled in this slot
Hardware revision 1.0 Board revision A0
[code].....
View 1 Replies
View Related
Dec 27, 2012
Today I got a pack of 7 Cisco T1 DSU/CSU WAN Interface Card (WIC-1DSU-T1-V2). I installed 6 of them (4 on a 2811 router and 2 on an 1841 router) and none of them would light up, show up in show controllers, or show up in show ip interface brief. Is there something I have to do aside from just inserting them in like getting software or entering in certain commands? (I installed the cards while the routers were powered off).
View 4 Replies
View Related
Aug 4, 2012
I put a second HWIC-4ES in a 3825 router and it does not work, only work the first card that is inserted, I use the slot 0 for it, the 0/0 and 1/0 work with serial card only if I put the HWIC-4ESW in this slots the router does not work, only work in 0/2 and 0/3 but only one, I need to know if there is a command to active it because the data sheet in CISCO indicate that this model of router support 2 HWIC-4ESW. url...
View 1 Replies
View Related
Feb 26, 2013
What is the part number of the power-supply of this router (WRP400)? [code]
View 6 Replies
View Related
Apr 20, 2012
I am trying to configure a newly installed HWIC-4ESW on a 2811 router to bridge to the FE 0/0 interface. Currently, I have a cheap switch connected to FE 0/0 which in turn connects to all the phones, however now I just want to connect all the phones to the HWIC and have it internally bridge to FE0/0 for the connectivity to CME, etc.
View 5 Replies
View Related
Jan 23, 2012
How to know my asa 5505 Part Number
View 2 Replies
View Related
Aug 30, 2012
There are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?
View 1 Replies
View Related
Sep 2, 2007
I have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .
View 2 Replies
View Related
Mar 20, 2013
the small fan of a SRP541w seems to have 'melted' it's way out of it's casing. How to know part number for a replacement fan for this router?
View 3 Replies
View Related
Jun 29, 2012
I recently upgraded my home network to include a new DOCIS 3 cable modem (SB 6121), RV 180 router, and a wireless access point. I have about 7 computers/devices on the network. A computer connected directly to the new modem was pulling down 30MB/sec (various speed tests), but when RV 180 was inserted between modem and network, downloads dropped to 10MB/sec. I worked with tech support (very kind), baselined the router, without improvement, and support conclusion was "hardware issue, need to RMA router".The one thing we failed to configure on the router was the Domain Name (Networking/LAN/IPv4 (local network)/DHCP/Domain Name:). Once I entered the domain name that actually matched the Workgroup / Domain name of the computers on the network, downloads and speed tests jumped to 30MB/sec consistently, and web browsing performance significantly improved.
View 11 Replies
View Related
Feb 17, 2007
Whether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).
View 10 Replies
View Related
Mar 5, 2012
what's the Intel wifi 5300 part number for the Latitude E4300?I bought one off of ebay that seems to be a generic version but Win7 x64 keeps giving a "device cannot start (code 10)" error. The seller insists it should work for a Dell Latitude E4300 and he send me the correct part. I have tried the latest Intel driver to no avail. I might end up getting a refund from the seller.
View 1 Replies
View Related
Apr 13, 2010
What is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?
View 11 Replies
View Related
Apr 13, 2013
I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.
1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.
View 1 Replies
View Related
Mar 27, 2012
my company just ordered fornew LMS release and exactly needed the support to open TAC's .I searched but couldn't find the part number for this,some one send me this part number CON-PSUS-LMS410K9,I searched but I could not find anything usefull.
View 2 Replies
View Related
Nov 22, 2011
I see that if I ask for 887va-sec-k9 I get an 887va with "advanced ip services" instead of the default "advanced security".
I can't see a corresponding part number for an 887va-w with advanced ip services. Is there one? Also, what would the part number be for memory to expand a va-w up to the max possible memory?
At a guess it would be the same part used to upgrade an 887va from 256 to 768, but since the part to upgrade from 256 to 512 is not the same as the part to upgrade from 512 to 768 I am not sure this is a safe guess.
View 1 Replies
View Related
Jul 19, 2012
We have a NM-T3/E3-RF card that fits inside a 3800, but does not fit into a 3945.
The documentation says it works with 3900 ISR Routers.
Is there a cradle or adapter that is required?
Does the "RF" section of the part number differentiate this from a NM-T3/E3 card?
View 5 Replies
View Related
Jan 27, 2004
Subject says it all. This is the newer style cable that doesn't utilize the separate cable and the grey RJ45/DB25 connector. It's a one piece black cable that has a molded DB25.
the one cable I have lists the following on its label.
Cisco
72-3663-01
LDM 3303
View 3 Replies
View Related
Jul 3, 2011
I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
i saw part number ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
Note;i use ASA 5510.
View 1 Replies
View Related
Mar 29, 2013
I have a laptop Dell 1318 Inspiron. At the extreme right front corner of the unit, there is an open 'wireless' slot. There used to be something there. Someone stole it. I can't find what part to replace it. My computer does not do bluetooth now. I had to buy an external Netgear wireless adapter, which uses a USB port that I could use. What is the original equipment that goes in the slot? Is that why my BT is not working. <ADMIN NOTE: Email id removed per privacy policy,
View 1 Replies
View Related
Jul 29, 2012
What is the orderable part number of Cisco 892 series routers.
View 1 Replies
View Related
Apr 30, 2012
url...For the New Firewalls i.e. 5512X , 5515X etc there seems to be integrated IPS and we don't need to order any extra license or part number to get the IPS features .
But for the 5585X It says 2Gbps for SSP10 engine but I have seen in the Dynamic Configuration Tool that SSP10 and IPS-SSP10 are different things . Which means that I will have to order 2 service engines SSP10 and IPS SSP10 to get the IPS features and if I only order SSP10 with that Chasis I will only get firewalling ?
View 3 Replies
View Related
Nov 16, 2011
how can i discover product actual part number from the device through console.I have a bought a cisco ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
ASA5540-AIP20-K9ASA 5540 Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA 5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA 5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco VPN Client Software (Windows, Solaris, Linux, Mac)1Included: ASA5540-VPN-PRASA 5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included: ASA5500-ENCR-K9ASA 5500 Strong Encryption License (3DES/AES)1Included: ASA-AIP-20-INC-K9ASA 5500 AIP Security Services Module-20 included w/ bundles1Included: ASA-180W-PWR-ACASA 180W AC Power Supply1Included: ASA-ANYCONN-CSD-K9ASA 5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1
View 6 Replies
View Related
Feb 21, 2013
I am running two ADSL lines into one C1921 router with 2 ADSLoPOTS cards installed.If I copy the firmware flash file on to the router (adsl_alc_20190.bin) and reboot, only one card shows the new firmware (slot 0).So sh dsl int atm 0/0/0 shows new firmware but sh dsl int atm 0/1/0 shows no change.How do I upgrade them both?
View 2 Replies
View Related
Jul 23, 2011
My computer suddenly doesnt recognize my router.it recognizes othrer routers, and my other PC's are recognizing the router.the router is located very close to the PC, and no other electronic devices located near by.
View 2 Replies
View Related
Mar 18, 2013
My Dell destop with Windows 7 all of a sudden doesn't seem to recognize my router, yet my laptop works fine (which I'm using now). After reading other posts, I reset the router with no results, used a new cable from the Belkin to the computer, changed ports, checked connections, restarted; nothing. When I do an ipconfig, a small window pops open and goes off before I can make anything out. I undestand Belkin's IP address is 192.168.2.1 and I'm showing that my IPv4DHCP Server is that, as is my DNS server. The IPv4WINS server shows nothing.
View 9 Replies
View Related
Jun 12, 2012
I just moved into a new apartment and inherited a former roommates internet set up. Our router was infected with DNSchanger, so I sought to reset the router and update the firmware. I reset the router and it no longer recognized the internet connection. I can connect when plugged directly into the modem, but the router doesn't recognize the internet connection. Below is my ipconfig/all log:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersREDACTED>ipconfig/all
[Code].....
View 4 Replies
View Related
Oct 6, 2011
According to specifications fo Cisco ISR G2 2911, it has got 4 EHWIC slots. But in [URL] appears that Cisco2911 supports only 2 HWIC-2FE or only 2 EHWIC-1GE-SFP-CU.
View 1 Replies
View Related
Oct 5, 2012
Ok this is the send router this has happened to but anyway after a power blink the router no longer recognizes that i have a modem connected to it no matter how many times I reboot both of them it can't recognize that i have a modem connected i know it is not the modem because i'm using it to type this right now directly connected to my desktop
I have windows 7
Linkysy E4200 V1
Century link DSL modem 660 series
View 9 Replies
View Related
May 10, 2013
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
View 6 Replies
View Related
Oct 20, 2012
I have a WRT54GS V7 that I have been running for a few years now with no problems until today.My wife used the internet from her laptop through the day but this evening after she moved to the bedroom and booted up the laptop, she found there was no internet connection. I tried what I know in cases like these, unplugging the router or modem for brief periods of time to try and get things going again but to no avail. So I tried using the Easylink Advisor which basically suggested the same process.
At this point, my internet connection is coming in from the cable just fine. I have access on the desktop which is wired and works with no problems. The modem and router lights are both signaling that everything is fine but no wireless internet coming from the router.
Using the desktop I tried looking for some solutions and tried resetting the router. I ultimately called customer support but being out of warranty they wanted too much although she suggested that I needed to reconfigure the router since I had reset it. I followed the online instructions for reconfiguring but still have gotten nowhere.
View 1 Replies
View Related