Cisco WAN :: Part Number For 887VA-W With IP Services And Image Names?
Nov 22, 2011
I see that if I ask for 887va-sec-k9 I get an 887va with "advanced ip services" instead of the default "advanced security".
I can't see a corresponding part number for an 887va-w with advanced ip services. Is there one? Also, what would the part number be for memory to expand a va-w up to the max possible memory?
At a guess it would be the same part used to upgrade an 887va from 256 to 768, but since the part to upgrade from 256 to 512 is not the same as the part to upgrade from 512 to 768 I am not sure this is a safe guess.
View 1 Replies
ADVERTISEMENT
Jan 23, 2012
How to know my asa 5505 Part Number
View 2 Replies
View Related
Aug 30, 2012
There are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?
View 1 Replies
View Related
Sep 2, 2007
I have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .
View 2 Replies
View Related
Mar 20, 2013
the small fan of a SRP541w seems to have 'melted' it's way out of it's casing. How to know part number for a replacement fan for this router?
View 3 Replies
View Related
Jun 29, 2012
I recently upgraded my home network to include a new DOCIS 3 cable modem (SB 6121), RV 180 router, and a wireless access point. I have about 7 computers/devices on the network. A computer connected directly to the new modem was pulling down 30MB/sec (various speed tests), but when RV 180 was inserted between modem and network, downloads dropped to 10MB/sec. I worked with tech support (very kind), baselined the router, without improvement, and support conclusion was "hardware issue, need to RMA router".The one thing we failed to configure on the router was the Domain Name (Networking/LAN/IPv4 (local network)/DHCP/Domain Name:). Once I entered the domain name that actually matched the Workgroup / Domain name of the computers on the network, downloads and speed tests jumped to 30MB/sec consistently, and web browsing performance significantly improved.
View 11 Replies
View Related
Feb 17, 2007
Whether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).
View 10 Replies
View Related
Mar 5, 2012
what's the Intel wifi 5300 part number for the Latitude E4300?I bought one off of ebay that seems to be a generic version but Win7 x64 keeps giving a "device cannot start (code 10)" error. The seller insists it should work for a Dell Latitude E4300 and he send me the correct part. I have tried the latest Intel driver to no avail. I might end up getting a refund from the seller.
View 1 Replies
View Related
Apr 13, 2010
What is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?
View 11 Replies
View Related
Apr 13, 2013
I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.
1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.
View 1 Replies
View Related
Mar 27, 2012
my company just ordered fornew LMS release and exactly needed the support to open TAC's .I searched but couldn't find the part number for this,some one send me this part number CON-PSUS-LMS410K9,I searched but I could not find anything usefull.
View 2 Replies
View Related
Jul 19, 2012
We have a NM-T3/E3-RF card that fits inside a 3800, but does not fit into a 3945.
The documentation says it works with 3900 ISR Routers.
Is there a cradle or adapter that is required?
Does the "RF" section of the part number differentiate this from a NM-T3/E3 card?
View 5 Replies
View Related
Jan 27, 2004
Subject says it all. This is the newer style cable that doesn't utilize the separate cable and the grey RJ45/DB25 connector. It's a one piece black cable that has a molded DB25.
the one cable I have lists the following on its label.
Cisco
72-3663-01
LDM 3303
View 3 Replies
View Related
Jul 3, 2011
I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
i saw part number ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
Note;i use ASA 5510.
View 1 Replies
View Related
Mar 29, 2013
I have a laptop Dell 1318 Inspiron. At the extreme right front corner of the unit, there is an open 'wireless' slot. There used to be something there. Someone stole it. I can't find what part to replace it. My computer does not do bluetooth now. I had to buy an external Netgear wireless adapter, which uses a USB port that I could use. What is the original equipment that goes in the slot? Is that why my BT is not working. <ADMIN NOTE: Email id removed per privacy policy,
View 1 Replies
View Related
Feb 26, 2013
What is the part number of the power-supply of this router (WRP400)? [code]
View 6 Replies
View Related
Jul 29, 2012
What is the orderable part number of Cisco 892 series routers.
View 1 Replies
View Related
Apr 30, 2012
url...For the New Firewalls i.e. 5512X , 5515X etc there seems to be integrated IPS and we don't need to order any extra license or part number to get the IPS features .
But for the 5585X It says 2Gbps for SSP10 engine but I have seen in the Dynamic Configuration Tool that SSP10 and IPS-SSP10 are different things . Which means that I will have to order 2 service engines SSP10 and IPS SSP10 to get the IPS features and if I only order SSP10 with that Chasis I will only get firewalling ?
View 3 Replies
View Related
Nov 16, 2011
how can i discover product actual part number from the device through console.I have a bought a cisco ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
ASA5540-AIP20-K9ASA 5540 Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA 5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA 5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco VPN Client Software (Windows, Solaris, Linux, Mac)1Included: ASA5540-VPN-PRASA 5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included: ASA5500-ENCR-K9ASA 5500 Strong Encryption License (3DES/AES)1Included: ASA-AIP-20-INC-K9ASA 5500 AIP Security Services Module-20 included w/ bundles1Included: ASA-180W-PWR-ACASA 180W AC Power Supply1Included: ASA-ANYCONN-CSD-K9ASA 5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1
View 6 Replies
View Related
Apr 18, 2011
I have a 3825 router running 12.4t IOS. I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it. Is this the right card for this router? Is there anything I can look at to determine the issue? I think the router only has 32M RAM. Below is a show hardware. Card is still currently installed.
View 2 Replies
View Related
Feb 26, 2012
I am looking for an IP Services IOS image for a WS-C3750E-24TD-E switch.Currently have a two switch stack composed of WS-C3750E-24TD-E & WS-C3750G-12S-E.Current IOS running: IP Base.
I need to be able to remove the stub mode for EIGRP, so I am looking for an IP Services image for WS-C3750E-24TD-E switch to be able to run full EIGRP. But I am not able to find one. What is the main difference between WS-C3750G & WS-C3750E switch?Is this even possible for the WS-C3750E?
View 2 Replies
View Related
Jan 23, 2013
How can I Upgrade a Cisco 3750X 12-SFP switch with IP Base to IP Services Image?
View 1 Replies
View Related
Aug 30, 2012
difference of CISCO887VA-K9 and CISCO887VA-SEC-K9.I thought it because of the Advanced Security and Advanced IP Licenses, but it isn't, I've got the -SEC- Version now just with the Advanced Security license. So I asking myself why I bought the more expensive CISCO887VA-SEC-K9 if I have to buy the additional Advanced IP Services licenses extra..
View 14 Replies
View Related
Feb 9, 2012
I'm have upgraded our ASA5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded: [code] Device Manager image set, but not a valid image file disk0:/asdm-647.bin.
View 3 Replies
View Related
Mar 26, 2011
I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
View 13 Replies
View Related
Oct 10, 2011
I'm looking at adding a Cisco 3750-X switch running c3750e-universalk9-mz.122-55.SE1 (IP base license) into a stack of 3750-G switches running c3750-ipbasek9-mz.122-55.SE1.bin Given that the version and feature sets are the same I don't forsee any compatibility issues. Would there be any reason why a universal image wouldn't stack correctly with other switches running the single .bin file?
View 9 Replies
View Related
Jan 6, 2012
Just planning my move to 8.4(2) and I'm looking for some input. In the past, I have a text file with name commands for every host on my network that I know about. I would then deploy this list to all ASAs so that I could create ACLs on any firewall using a name, which would correlate to the same IP on any firewall.Now, the names from the name command no longer work as a host entry in ACLs, therefore I'm required to switch all of my active name command entries over to objects.My question is, have any of you found an easy way to change all name commands to objects? Since the name command doesn't specify the mask of the entry, I think this may not be possible without manually updating thousands of records. I know that once I migrate, there will be some objects auto-created, but those will only be host and or networks which have NATs associated with them.
View 7 Replies
View Related
Feb 12, 2012
I have an issue with LMS 4.1 where the DCR names of several devices repeatedly revert to the IP address. I am trying to stage some devices for deployment. The initial 5 devices were staged and are now off-line. A subsequent set of 6 devices is on-line and accessible from LMS4.1. The device names on the off-line devices are stable. The device names of the on-line devices revert back to an IP address every day. From device management, I go in and change the display name and the host name from the IP address to an alphabetic host name. When I go back and look at it the next day, it has reverted to the IP address.
View 2 Replies
View Related
Sep 17, 2011
Is it possible to give me NAS and Xbox 360 Host names so that they show up in my DHCP Client list? Currently there are 13 devices connected, 11 of which have a host name but these two do not. It also shows the IP and MAC addresses of each connected device.I just want to make sure that all of the devices that are connected are what I would expect.
View 1 Replies
View Related
Sep 30, 2011
I have been asked to do is locate some computers on the network and run a security scan on them. Well i pinged the host name and got an IP address. Then the network admin me look up the switch port that the computer is located on and so on. So i find 3 of the computers im looking for and when i get on the computer and look up the name but it does not match the name given to me. So i do an ipconfig /all and see that the computer has the right IP address and MAC address but not the same name. So my main question is, are these computers one in the same or is something messed up?
View 1 Replies
View Related
Jul 22, 2012
What is the difference /how to show part number,part code and serial number on cisco ASA 5520 series.succeed to get serial number by command show activation-key detail..how to get part code /part number?
View 2 Replies
View Related
May 21, 2012
I have cisco's CUCM version System version: 7.1.5.10000-12 when I do a corporate lookup (form my 7970 I hit Directories - 5) Corporate Directory) I see all sort of accounts that have no phone extensions I.E. our windows service accounts, our administrator accounts that have no number associated with them. is there a way for me to hide them?
View 1 Replies
View Related
Jun 8, 2011
Is it possible somehow to define externally administred DNS namese in ASA 8.4 in within object groups?i know that we can use name XXX, but some idea popped up using this kind of configuration.
View 3 Replies
View Related
