Cisco Routers :: Part Number Of RV180W

Aug 30, 2012

There are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?

View 1 Replies


ADVERTISEMENT

Cisco Routers :: Part Number For Replacement Of Fan SRP541W

Mar 20, 2013

the small fan of a SRP541w seems to have 'melted'  it's way out of it's casing. How to know part number for a replacement fan for this router?

View 3 Replies View Related

Cisco Routers :: WRP400 Part Number Of Power-supply Of Router

Feb 26, 2013

What is the part number of the power-supply of this router (WRP400)? [code]

View 6 Replies View Related

Cisco VPN :: How To Know ASA 5505 Part Number

Jan 23, 2012

How to know my asa 5505 Part Number

View 2 Replies View Related

Cisco WAN :: The Part Number For Fan Tray WS-C4006-S2

Sep 2, 2007

I have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .

View 2 Replies View Related

Cisco WAN :: Deciding Part Number For WS-C4006-S2 Fan Tray?

Jun 29, 2012

I recently upgraded my home network to include a new DOCIS 3 cable modem (SB 6121), RV 180 router, and a wireless access point.  I have about 7 computers/devices on the network.  A computer connected directly to the new modem was pulling down 30MB/sec (various speed tests), but when RV 180 was inserted between modem and network, downloads dropped to 10MB/sec.  I worked with tech support (very kind), baselined the router, without improvement, and support conclusion was "hardware issue, need to RMA router".The one thing we failed to configure on the router was the Domain Name (Networking/LAN/IPv4 (local network)/DHCP/Domain Name:).  Once I entered the domain name that actually matched the Workgroup / Domain name of the computers on the network, downloads and speed tests jumped to 30MB/sec consistently, and web browsing performance significantly improved. 

View 11 Replies View Related

Cisco Switching/Routing :: 2811 - Fan Part Number

Feb 17, 2007

Whether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).

View 10 Replies View Related

Dell :: Wi-Fi 5300 Part Number For Latitude E4300

Mar 5, 2012

what's the Intel wifi 5300 part number for the Latitude E4300?I bought one off of ebay that seems to be a generic version but Win7 x64 keeps giving a "device cannot start (code 10)" error. The seller insists it should work for a Dell Latitude E4300 and he send me the correct part. I have tried the latest Intel driver to no avail. I might end up getting a refund from the seller.

View 1 Replies View Related

Cisco Switches :: SRW208MP AC Power Adapter Part Number

Apr 13, 2010

What is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?

View 11 Replies View Related

Cisco Firewall :: SMARTnet 8x5xNBD Part Number For ASA5510-SEC-BUN-K9

Apr 13, 2013

I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco   ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.

1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.

View 1 Replies View Related

Cisco :: CON-PSUS-LMS410K9 Support Contract Part Number

Mar 27, 2012

my company just ordered fornew LMS release and exactly needed the support to open TAC's .I searched but couldn't find the part number for this,some one send me this part number CON-PSUS-LMS410K9,I searched but I could not find anything usefull.

View 2 Replies View Related

Cisco WAN :: Part Number For 887VA-W With IP Services And Image Names?

Nov 22, 2011

I see that if I ask for 887va-sec-k9 I get an 887va with "advanced ip services" instead of the default "advanced security".
 
I can't see a corresponding part number for an 887va-w with advanced ip services. Is there one? Also, what would the part number be for memory to expand a va-w up to the max possible memory?
 
At a guess it would be the same part used to upgrade an 887va from 256 to 768, but since the part to upgrade from 256 to 512 is not the same as the part to upgrade from 512 to 768 I am not sure this is a safe guess.

View 1 Replies View Related

Cisco WAN :: Does RF Section Of Part Number Differentiate From NM-T3 / E3 Card 3945

Jul 19, 2012

We have a NM-T3/E3-RF card that fits inside a 3800, but does not fit into a 3945.  
 
The documentation says it works with 3900 ISR Routers.
 
Is there a cradle or adapter that is required?
 
Does the "RF" section of the part number differentiate this from a NM-T3/E3 card?   

View 5 Replies View Related

Cisco Infrastructure :: 3303 - Part Number Of New Molded AUX Cable

Jan 27, 2004

Subject says it all.  This is the newer style cable that doesn't utilize the separate cable and the grey RJ45/DB25 connector.  It's a one piece black cable that has a molded DB25.
 
the one cable I have lists the following on its label.
 
Cisco
72-3663-01
LDM 3303

View 3 Replies View Related

Cisco Firewall :: ASA 5510 - Part Number For CSC-SSM With Premium Plus License?

Jul 3, 2011

 I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
 
i saw part number  ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
 
Note;i use ASA 5510.

View 1 Replies View Related

Dell :: Inspiron Laptop 1318 Part Number Required

Mar 29, 2013

I have a laptop Dell 1318 Inspiron.  At the extreme right front corner of the unit, there is an open 'wireless' slot.  There used to be something there.  Someone stole it.  I can't find what part to replace it.  My computer does not do bluetooth now.  I had to buy an external Netgear wireless adapter, which uses a USB port that I could use.  What is the original equipment that goes in the slot?  Is that why my BT is not working. <ADMIN NOTE: Email id removed per privacy policy,

View 1 Replies View Related

Cisco Switching/Routing :: 892 Power Adapter Orderable Part Number

Jul 29, 2012

What is the orderable part number of Cisco 892 series routers.

View 1 Replies View Related

Cisco Firewall :: 5512X Any Extra License Or Part Number To Get IPS Features

Apr 30, 2012

url...For the New Firewalls i.e. 5512X , 5515X etc there seems to be integrated IPS and we don't need to order any extra license or part number to get the IPS features .
 
But for the 5585X It says 2Gbps for SSP10 engine but I have seen in the Dynamic Configuration Tool that SSP10 and IPS-SSP10 are different things . Which means that I will have to order 2 service engines SSP10 and IPS SSP10 to get the IPS features and if I only order SSP10 with that Chasis I will only get firewalling  ?

View 3 Replies View Related

Cisco Firewall :: ASA5540-AIP20-K9 / Discover Actual Product Part Number

Nov 16, 2011

how can i discover product actual part number from the device through console.I have a bought a cisco  ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
 
ASA5540-AIP20-K9ASA 5540   Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC   Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA   5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA   5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco   VPN Client Software (Windows, Solaris, Linux, Mac)1Included:   ASA5540-VPN-PRASA   5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included:   ASA5500-ENCR-K9ASA   5500 Strong Encryption License (3DES/AES)1Included:   ASA-AIP-20-INC-K9ASA   5500 AIP Security Services Module-20 included w/ bundles1Included:   ASA-180W-PWR-ACASA   180W AC Power Supply1Included:   ASA-ANYCONN-CSD-K9ASA   5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS   SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1 

View 6 Replies View Related

Cisco Routers :: RV180W - Any External Source IP For RV180W DMZ?

Apr 21, 2013

I got : RV180W router updated with the last firmware.Static IP for the DMZ host (Synology Server 212+) My problem is that I had try all combinaison since 10 days to get IP source in synology interface (to block IP's of bad connections...) but, I only see the RV180W adress....So impossible to block bad connections IP.

View 3 Replies View Related

Cisco WAN :: 3825 Installed DSU / CSU Part Number HWIC-1DSU-T1 In Router / Doesn't Recognize

Apr 18, 2011

I have a 3825 router running 12.4t IOS.  I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it.  Is this the right card for this router?  Is there anything I can look at to determine the issue?  I think the router only has 32M RAM.  Below is a show hardware. Card is still currently installed.

View 2 Replies View Related

Cisco Routers :: Difference Between RV180W-E-K9-G5 And RV180W-A-K9-NA?

Dec 15, 2012

I would like to ask if what is the difference between RV180W-E-K9-G5 and RV180W-A-K9-NA specifically the -E and the -A.  As far as I know -A is the compliance code for Philippines.  Am I right?  If yes, what about -E?  There is a documentation for wireless complaince on Aeronet devices but what about these SB products?

View 9 Replies View Related

D-Link DIR-615 :: Routers With NAT As Part Of Their Security Configuration?

Dec 29, 2011

I've noticed that many people have routers with NAT as part of their security configuration. What NAT is/does? Also, I entered the router's settings and went to Advanced > Firewall > NAT ENDPOINT FILTERING .There are 3 options specified for UDP/TCP Endpont Filtering; they are:

Endpoint Independent
Address Restricted
Port and Address Restricted

What are these options? I downloaded the manual for the router but it doesn't mention what NAT, Endpoint Independent, Address Restricted, and Port and Address Restricted are.

Side Note: I thought about setting up a secure connection using WPA2. Right not I'm using an unsecured wireless network. If I setup a new secure wireless connection using WPA2 will my current unsecured connection still be available?

View 11 Replies View Related

Cisco Routers :: RV180W Upgrade From 1.0.0.30 To 1.0.2.6

Mar 15, 2013

I installed the RV180W yesterday and decided to play with it a bit today. I got stuck on the firmware update. Tried different browsers on different PC's. Tried going to 1.0.1.9 first. I have the "reset all configurations" button checked. After looking through the posts here I'm not sure this firmware will even fix my next few problems(port forwarding etc).  Is there a trick with this device?

View 4 Replies View Related

Cisco Routers :: VPN Connection Between Two RV180W?

Feb 5, 2013

I'm trying to make the VPN connection between two routers CISCO RV180w.I performed the basic configuration in cisco "server". I did the same in cisco "client".The following configuration and logs, do not know what to do ...
 
SERVER CONFIGURATION:
 IKE Policy Configuration: 
VPN Policy Configuration:
 CLIENT CONFIGURATION:

[code]....

View 8 Replies View Related

Cisco Routers :: RV180W VLAN ID On WAN

Apr 9, 2013

We have installed a fiber internet access and have the ONT from the provider already installed.We're trying to use the RV180W to use this internet connection. [code] So I need to configure the router with the .36 static IP on the WAN, and using the .37 gateway and the provided DNS servers. I also need that this WAN is tagged with VLAN ID 20. I'm only able to set VLAN ID on the LAN ports via the admin interface.

View 8 Replies View Related

Cisco Routers :: RV180w VPN Configuration For Mac OS X

Jul 25, 2012

I am struggling to configure my new RV180w router to accept a VPN connection from my Apple computers.
 
I wish to use IPSec with Group and Pre-Shared Key authentication. The RV180 has just replaced my 800 series ADSL router and I want my remote clients to be able to connect using either the VPN client capability built into the OS X operating system or the Cisco VPN Client software installed on their Macs.
 
So far, using the RV180's web setup screens, I have created a VPN Policy and a corresponding IKE Policy was created as well. I couldn't see anywhere to include the 'Group' name. I have created a user but wasn't sure of which Protocol to use so I am trying XAUTH.
 
At the client end some people are connecting using Cisco's VPN Client software Download Software - Cisco Systems
 
Some people, with OS X 10.6 and above, are using the Mac OS X network built-in VPN client.
 
We all connected without a problem to the previous 800 series router using IPSec with Group authentication and Pre-Shared key.

View 5 Replies View Related

Cisco Routers :: RV180W - Firmware 1.0.2.6 UC 100%

Mar 19, 2013

i've installed the new firmware on my router and now the UC is showing 100% all the time. I've tried to factory reset it, it's doing the same thing. If I downgrade to previous firmware, it goes back to normal . I've only 1 PC in my network (test lab), so no big traffic here. is it a bug ?

View 1 Replies View Related

Cisco Routers :: RV180W Do Not Allow VLANs To Communicate?

Oct 3, 2012

I just recently switched from the WRVS4400N to the RV180W. I have 4 VLANs, and I want VLANs 1, 2, 3 to communciate freely, but I DONT want VLAN 4 to communicate with anybody, just Internet access. On the WRVS4400N, I was able to do this using the Firewall > IP Based ACL. I notcied that the RV180W, does not have such an option. I am sure there is something I am missing, I just cant find out how to isolate VLAN 4.

View 5 Replies View Related

Cisco Routers :: Rv180w Ftp Upload With Vsftpd

Sep 6, 2012

we've changed our rv042 for a rv180w and now when I try to upload files to my ftp server (vsftpd under centos) it get stuck at 100%.I've changed my ftp server to proftpd instead of vsftpd and everything's ok.but vsftpd isn't the problem since i was able to upload with my rv042 without any problems.so i guess there's a problem with the rv180w security.i've already disable stealth mode and it's doing the same thing when i try to upload to the same server but through the vpn tunnel, everything's ok.So it's really in the rv180w lan->wan routing

View 10 Replies View Related

Cisco Routers :: VPN Client Software For RV180W?

Aug 13, 2012

Have not purchased RV180W at this time, therefore have not read manual. Need for small office, 2 VPN logins max & not 24x7 use. What VPN client software ? (using Win7-64bit laptops)
 
I did notice software called Quick VPN Client 1.4.2.1 for download.
 
Does buying RV180W allow download of Cisco Systems VPN Client software ?

View 2 Replies View Related

Cisco Routers :: RV180W PPPoE Not Connecting

Feb 18, 2013

I am located in UK which uses PPoA for ADSL broadband. I use a DrayTek Vigor120 ADSL2 Modem to act as an ADSL bridge and PPoA to PPPoE converter. This passes the ADSL authentication requirement  (and subsequent single static IP address) to the Cisco Small Business RV180W sitting behind the Draytek. However, the RV180 (Firmware Version 1.0.0.30) cannot form the PPPoE connection. I have tested the modem, adsl username and password by creating a PPPoE interface on my computer and connecting this directly to the Draytek modem. The computer receives the expected IP address and I can ping remote public IPs. I have entered the username and password into the PPPoE profile,

Authentication type: CHAP (confirmed by ISP but I have also tried all other options just in case).
Connection Type: Keep Connected.
MTU Size: 1400 (also tried default, which worked OK on computer interface).
MAC Address Source: Use Default (I have successfully used combined modem/router so a "fixed" MAC address is not required).

View 3 Replies View Related

Cisco Routers :: Connect Through RV180W To VPN Provider

May 21, 2013

I live in China.  I want all of my PC's and devices to connect through the RV180W VPN Router to a VPN provider in the US so that all of my traffic is encrypted and appears to have a US IP address. I need to find a VPN Service Provider that supports the RV180W and how to configure it. I don't want to configure every PC and device, I just want them to use the VPN conneciton at the router.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved