I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.
1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.
I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
i saw part number ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
Note;i use ASA 5510.
url...For the New Firewalls i.e. 5512X , 5515X etc there seems to be integrated IPS and we don't need to order any extra license or part number to get the IPS features .
But for the 5585X It says 2Gbps for SSP10 engine but I have seen in the Dynamic Configuration Tool that SSP10 and IPS-SSP10 are different things . Which means that I will have to order 2 service engines SSP10 and IPS SSP10 to get the IPS features and if I only order SSP10 with that Chasis I will only get firewalling ?
how can i discover product actual part number from the device through console.I have a bought a cisco ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
ASA5540-AIP20-K9ASA 5540 Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA 5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA 5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco VPN Client Software (Windows, Solaris, Linux, Mac)1Included: ASA5540-VPN-PRASA 5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included: ASA5500-ENCR-K9ASA 5500 Strong Encryption License (3DES/AES)1Included: ASA-AIP-20-INC-K9ASA 5500 AIP Security Services Module-20 included w/ bundles1Included: ASA-180W-PWR-ACASA 180W AC Power Supply1Included: ASA-ANYCONN-CSD-K9ASA 5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1
I am using ASA5510, and I would like to know if we should reset the number of Hits for ACL ? Actually this number increase in front of each ACL. Is there any specific configuration ?
View 4 Replies View RelatedHow to know my asa 5505 Part Number
View 2 Replies View RelatedThere are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?
View 1 Replies View RelatedI have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .
View 2 Replies View Relatedthe small fan of a SRP541w seems to have 'melted' it's way out of it's casing. How to know part number for a replacement fan for this router?
View 3 Replies View RelatedI recently upgraded my home network to include a new DOCIS 3 cable modem (SB 6121), RV 180 router, and a wireless access point. I have about 7 computers/devices on the network. A computer connected directly to the new modem was pulling down 30MB/sec (various speed tests), but when RV 180 was inserted between modem and network, downloads dropped to 10MB/sec. I worked with tech support (very kind), baselined the router, without improvement, and support conclusion was "hardware issue, need to RMA router".The one thing we failed to configure on the router was the Domain Name (Networking/LAN/IPv4 (local network)/DHCP/Domain Name:). Once I entered the domain name that actually matched the Workgroup / Domain name of the computers on the network, downloads and speed tests jumped to 30MB/sec consistently, and web browsing performance significantly improved.
View 11 Replies View RelatedWhether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).
View 10 Replies View Relatedwhat's the Intel wifi 5300 part number for the Latitude E4300?I bought one off of ebay that seems to be a generic version but Win7 x64 keeps giving a "device cannot start (code 10)" error. The seller insists it should work for a Dell Latitude E4300 and he send me the correct part. I have tried the latest Intel driver to no avail. I might end up getting a refund from the seller.
View 1 Replies View RelatedWhat is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?
View 11 Replies View Relatedmy company just ordered fornew LMS release and exactly needed the support to open TAC's .I searched but couldn't find the part number for this,some one send me this part number CON-PSUS-LMS410K9,I searched but I could not find anything usefull.
View 2 Replies View RelatedI see that if I ask for 887va-sec-k9 I get an 887va with "advanced ip services" instead of the default "advanced security".
I can't see a corresponding part number for an 887va-w with advanced ip services. Is there one? Also, what would the part number be for memory to expand a va-w up to the max possible memory?
At a guess it would be the same part used to upgrade an 887va from 256 to 768, but since the part to upgrade from 256 to 512 is not the same as the part to upgrade from 512 to 768 I am not sure this is a safe guess.
We have a NM-T3/E3-RF card that fits inside a 3800, but does not fit into a 3945.
The documentation says it works with 3900 ISR Routers.
Is there a cradle or adapter that is required?
Does the "RF" section of the part number differentiate this from a NM-T3/E3 card?
Subject says it all. This is the newer style cable that doesn't utilize the separate cable and the grey RJ45/DB25 connector. It's a one piece black cable that has a molded DB25.
the one cable I have lists the following on its label.
Cisco
72-3663-01
LDM 3303
I have a laptop Dell 1318 Inspiron. At the extreme right front corner of the unit, there is an open 'wireless' slot. There used to be something there. Someone stole it. I can't find what part to replace it. My computer does not do bluetooth now. I had to buy an external Netgear wireless adapter, which uses a USB port that I could use. What is the original equipment that goes in the slot? Is that why my BT is not working. <ADMIN NOTE: Email id removed per privacy policy,
View 1 Replies View RelatedWhat is the part number of the power-supply of this router (WRP400)? [code]
View 6 Replies View RelatedWhat is the orderable part number of Cisco 892 series routers.
View 1 Replies View RelatedI have a 3825 router running 12.4t IOS. I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it. Is this the right card for this router? Is there anything I can look at to determine the issue? I think the router only has 32M RAM. Below is a show hardware. Card is still currently installed.
View 2 Replies View RelatedWe just bought smartnet for our cisco 5510. How should i activate this support and get the benefits.
View 2 Replies View RelatedI have an ASA 5505 with status light solid amber color. It is under SmartNet.I'd like to know Cisco will replaced this device with new ASA5505 or upgrade one?
View 2 Replies View RelatedWhat is the difference /how to show part number,part code and serial number on cisco ASA 5520 series.succeed to get serial number by command show activation-key detail..how to get part code /part number?
View 2 Replies View RelatedASA 5510 have two model Bun-K9 and Sec-Bun-K9 from the datasheet find out difference Port related and Redundancy. My questions is : Have any major difference for Security service between two model ?
View 3 Replies View RelatedI have FWSM failover pair, Active/Active configuration, admin and another 4 context, few context active on first FWSM, other on second FWSM.I needed to add VLANs 51 and 52 to FWSMI created VLANs on both Cat6500, created firewall vlan-group 3 a and put "firewall module1 vlan-group 3" on both cat6500Then I log in in system space on primary FWSM and created interface VLAN.Created VLANs automatically occured in system space on Secondary FWSM.Then I wanted allocate VLAN 51 and 52 to context XY, so I went to part of configuration for context XY and "allocate-interface Vlan51" and "allocate-interface Vlan52".
View 1 Replies View RelatedWe purchased an ASA 5505 (ASA5505-BUN-K9) and more recently purchased the license to upgrade it from 10 to 50 users (L-ASA5505-10-50). I would like to provide remote access to users via AnyConnect - specifically, AnyConnnect on Windows plus the iPhone/iPad and Android versions. My understanding is that I should purchase the Anyconnect Essentials (L-ASA-AC-E-5505) and Anyconnect Mobile (L-ASA-AC-M-5505) licenses. Is this correct? If I do this, how many simultaneous remote access VPN connections (via Anyconnect clients) will the ASA then support?
Further, we did not initially purchase Smartnet with this device, but I would like to do so to gain access to software updates. Is there a site or document where I can locate the SKU #'s for Smartnet contracts that would be appropriate with our device?
The output of "show version" is below:
Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.3(1)
Compiled on Thu 04-Mar-10 16:56 by builders
System image file is "disk0:/asa831-k8.bin"
Config file at boot was "startup-config"
[code]....
I have bought 2 new ASA5505 with SmartNet contract. I already have my 2 SmarNet contract number. Now I want to add these 2 contracts to my TAC account, so I can have support for my 2 new products. My TAC account already have 1 SmartNet contract for another device I have.What is the procedure to add my SmartNet contract to my account?
View 2 Replies View Relatedcan't find SmartNet coverage for AP2602I
View 3 Replies View RelatedIs there any significance to the parameter "firewall-group" in the command
firewall vlan-group <firewall-group> <vlan-id>…<vlan-id>?
In other words is the series of commands
firewall switch 1 module 3 vlan-group 1,2
firewall vlan-group 1 100,101,102
firewall vlan-group 2 200,201,202
exactly equivalent to
firewall switch 1 module 3 vlan-group 3
firewall vlan-group 3 100,101,102,200,201,202
or
firewall switch 1 module 3 vlan-group 1,2,3
firewall vlan-group 1 100,200
firewall vlan-group 2 101,201
firewall vlan-group 3 102,202
All three of these options associate the same set of vlans to the FWSM but using different groupings. As far as I can tell, these groupings have no functional significance either on the switch side or the FWSM side. These are simply three different ways of specifying exactly the same thing? Am I correct?
I am able to ping from Switch to firewall inside ip and user desktop ip but unable to ping from user desktop to FW Inside ip.. config is below for both switch and FW Cisco ASA5510....
TechCore-SW#ping 172.22.15.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.22.15.10, timeout is 2 seconds:
[Code].....
I have two ASA5510's set up in failover, and the secondary keeps crashing after doing the interface checks when bringing failover up. This only happens if I try to upgrade the image on the secondary to anything newer than 8.4.1 (I've tried with 8.4.1-11 and 8.4.2). The primary one run just fine with new images.
I don't have the exact error right now, as I need to do a screen capture from console. It's just a huge crash dump.Are there anything I might have missed during the upgrade? Should I cold-boot both the firewalls in the correct order?
I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
