Cisco WAN :: Deciding Part Number For WS-C4006-S2 Fan Tray?

Jun 29, 2012

I recently upgraded my home network to include a new DOCIS 3 cable modem (SB 6121), RV 180 router, and a wireless access point.  I have about 7 computers/devices on the network.  A computer connected directly to the new modem was pulling down 30MB/sec (various speed tests), but when RV 180 was inserted between modem and network, downloads dropped to 10MB/sec.  I worked with tech support (very kind), baselined the router, without improvement, and support conclusion was "hardware issue, need to RMA router".The one thing we failed to configure on the router was the Domain Name (Networking/LAN/IPv4 (local network)/DHCP/Domain Name:).  Once I entered the domain name that actually matched the Workgroup / Domain name of the computers on the network, downloads and speed tests jumped to 30MB/sec consistently, and web browsing performance significantly improved. 

View 11 Replies


ADVERTISEMENT

Cisco WAN :: The Part Number For Fan Tray WS-C4006-S2

Sep 2, 2007

I have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .

View 2 Replies View Related

Cisco VPN :: How To Know ASA 5505 Part Number

Jan 23, 2012

How to know my asa 5505 Part Number

View 2 Replies View Related

Cisco Routers :: Part Number Of RV180W

Aug 30, 2012

There are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?

View 1 Replies View Related

Cisco Routers :: Part Number For Replacement Of Fan SRP541W

Mar 20, 2013

the small fan of a SRP541w seems to have 'melted'  it's way out of it's casing. How to know part number for a replacement fan for this router?

View 3 Replies View Related

Cisco Switching/Routing :: 2811 - Fan Part Number

Feb 17, 2007

Whether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).

View 10 Replies View Related

Dell :: Wi-Fi 5300 Part Number For Latitude E4300

Mar 5, 2012

what's the Intel wifi 5300 part number for the Latitude E4300?I bought one off of ebay that seems to be a generic version but Win7 x64 keeps giving a "device cannot start (code 10)" error. The seller insists it should work for a Dell Latitude E4300 and he send me the correct part. I have tried the latest Intel driver to no avail. I might end up getting a refund from the seller.

View 1 Replies View Related

Cisco Switches :: SRW208MP AC Power Adapter Part Number

Apr 13, 2010

What is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?

View 11 Replies View Related

Cisco Firewall :: SMARTnet 8x5xNBD Part Number For ASA5510-SEC-BUN-K9

Apr 13, 2013

I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco   ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.

1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.

View 1 Replies View Related

Cisco :: CON-PSUS-LMS410K9 Support Contract Part Number

Mar 27, 2012

my company just ordered fornew LMS release and exactly needed the support to open TAC's .I searched but couldn't find the part number for this,some one send me this part number CON-PSUS-LMS410K9,I searched but I could not find anything usefull.

View 2 Replies View Related

Cisco WAN :: Part Number For 887VA-W With IP Services And Image Names?

Nov 22, 2011

I see that if I ask for 887va-sec-k9 I get an 887va with "advanced ip services" instead of the default "advanced security".
 
I can't see a corresponding part number for an 887va-w with advanced ip services. Is there one? Also, what would the part number be for memory to expand a va-w up to the max possible memory?
 
At a guess it would be the same part used to upgrade an 887va from 256 to 768, but since the part to upgrade from 256 to 512 is not the same as the part to upgrade from 512 to 768 I am not sure this is a safe guess.

View 1 Replies View Related

Cisco WAN :: Does RF Section Of Part Number Differentiate From NM-T3 / E3 Card 3945

Jul 19, 2012

We have a NM-T3/E3-RF card that fits inside a 3800, but does not fit into a 3945.  
 
The documentation says it works with 3900 ISR Routers.
 
Is there a cradle or adapter that is required?
 
Does the "RF" section of the part number differentiate this from a NM-T3/E3 card?   

View 5 Replies View Related

Cisco Infrastructure :: 3303 - Part Number Of New Molded AUX Cable

Jan 27, 2004

Subject says it all.  This is the newer style cable that doesn't utilize the separate cable and the grey RJ45/DB25 connector.  It's a one piece black cable that has a molded DB25.
 
the one cable I have lists the following on its label.
 
Cisco
72-3663-01
LDM 3303

View 3 Replies View Related

Cisco Firewall :: ASA 5510 - Part Number For CSC-SSM With Premium Plus License?

Jul 3, 2011

 I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
 
i saw part number  ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
 
Note;i use ASA 5510.

View 1 Replies View Related

Dell :: Inspiron Laptop 1318 Part Number Required

Mar 29, 2013

I have a laptop Dell 1318 Inspiron.  At the extreme right front corner of the unit, there is an open 'wireless' slot.  There used to be something there.  Someone stole it.  I can't find what part to replace it.  My computer does not do bluetooth now.  I had to buy an external Netgear wireless adapter, which uses a USB port that I could use.  What is the original equipment that goes in the slot?  Is that why my BT is not working. <ADMIN NOTE: Email id removed per privacy policy,

View 1 Replies View Related

Cisco Routers :: WRP400 Part Number Of Power-supply Of Router

Feb 26, 2013

What is the part number of the power-supply of this router (WRP400)? [code]

View 6 Replies View Related

Cisco Switching/Routing :: 892 Power Adapter Orderable Part Number

Jul 29, 2012

What is the orderable part number of Cisco 892 series routers.

View 1 Replies View Related

Cisco Firewall :: 5512X Any Extra License Or Part Number To Get IPS Features

Apr 30, 2012

url...For the New Firewalls i.e. 5512X , 5515X etc there seems to be integrated IPS and we don't need to order any extra license or part number to get the IPS features .
 
But for the 5585X It says 2Gbps for SSP10 engine but I have seen in the Dynamic Configuration Tool that SSP10 and IPS-SSP10 are different things . Which means that I will have to order 2 service engines SSP10 and IPS SSP10 to get the IPS features and if I only order SSP10 with that Chasis I will only get firewalling  ?

View 3 Replies View Related

Cisco Firewall :: ASA5540-AIP20-K9 / Discover Actual Product Part Number

Nov 16, 2011

how can i discover product actual part number from the device through console.I have a bought a cisco  ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
 
ASA5540-AIP20-K9ASA 5540   Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC   Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA   5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA   5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco   VPN Client Software (Windows, Solaris, Linux, Mac)1Included:   ASA5540-VPN-PRASA   5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included:   ASA5500-ENCR-K9ASA   5500 Strong Encryption License (3DES/AES)1Included:   ASA-AIP-20-INC-K9ASA   5500 AIP Security Services Module-20 included w/ bundles1Included:   ASA-180W-PWR-ACASA   180W AC Power Supply1Included:   ASA-ANYCONN-CSD-K9ASA   5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS   SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1 

View 6 Replies View Related

Cisco WAN :: 3825 Installed DSU / CSU Part Number HWIC-1DSU-T1 In Router / Doesn't Recognize

Apr 18, 2011

I have a 3825 router running 12.4t IOS.  I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it.  Is this the right card for this router?  Is there anything I can look at to determine the issue?  I think the router only has 32M RAM.  Below is a show hardware. Card is still currently installed.

View 2 Replies View Related

Cisco Infrastructure :: Finding Replacement For Switch C4006?

Oct 3, 2012

Right Now we are using Cisco switch model c4006.and we are looking to replacement for the same . Below are our requirements.
 
1: Around 120 Ports (100 Mbps)
2: Around 30 Ports   (1Giga)
3: Layer2/Layer3

View 2 Replies View Related

Cisco :: WS-C4006 / LMS 4.1 Configuration To Recognize Different Prompt For Devices

Mar 5, 2012

I have some problem with WS-C4006 Cisco Catalyst that LMS doesn't collect and put into "never collected" area. I also see that those devices doesn't show the classic prompt ">" and "#". Could be the main problem ? If yes how can configure LMS to recognize a different prompt for devices.

View 1 Replies View Related

Cisco WAN :: 2xT-1 Deciding Between A Partial DS3 And Metro Ethernet

Jan 22, 2012

We are in the process of upgrading the bandwidth at a few offices. Each currently have a 2xT-1 connection but have high utilization on the circuit which is why they are being upgraded. We are trying to decide b/t either a partial DS3 or metro ethernet connection. Are there pros/cons b/t the two in order to decide which to go with? Cost is not an issue. Some say going with a partial DS3 circuit offers benefits over metro ethernet such as network-based failover, end-to-end availability is better with DS-3 and QoS.

View 3 Replies View Related

Cisco Firewall :: Deciding On Failover Strategy For ASA5520

Oct 21, 2011

I'm not very experienced in ASA failover designs, have over the years worked with 5505 & 5510's. With two 5520 on my hands right now I need to decide on the best failover design to meet the goal. The ASA group needs to provide VPN (site-site and support Cisco old fashioned VPN clients) and also serve as an internet facing firewall. Not many interfaces will be created. Would active/active failover be a possible configuration considering the VPN setup? Can active/active be used to let one 5520 performance deal with VPN and the other handle the firewall (until failover occurs where one would handle both jobs)?

View 2 Replies View Related

DIR-655 - Router Randomly Deciding To Stop Working?

Apr 23, 2012

Once again I'm stuck to tethering on my phone due to my router deciding to call it quits for the random moment. I cannot access its control panel, the network just goes kaput. Given that I don't have access to the router since it's part of a double house (the side I'm not on of course), this is getting beyond irritating to reboot it when this happens as that is the only way to fix it. The connections are even wired, too. What kind of money does it take to get a router that is going to STAY on and just work? I'm ready to dump some serious cash into this at this point because this happens at least twice a week anymore. I just want a router that works. It needs to be wireless as my neighbor does use his kindle on it every once and a while.

View 4 Replies View Related

Cisco Switching/Routing :: 891 Deciding On Network Topology Of Router And FW

Jun 5, 2013

We currently support a third party VOIP software. Recently we have had issues with our T38 faxing to our SIP Trunk provider because our FW (sonicwall) doesn't support Nating the connection address within the SDP packet of the T.38 reinvite. This has caused us to look at alternate solutions. I have been in discussion with CISCO sales engineers and can't get a straight answer on which one of their products support this(RFC 3362, T.38 protocol used by our VOIP server)We were looking at replacing our sonicwall with an ASA but it seems it doesn't support RFC 3362 either . However, the sales engineer thinks that their regular routers will. So If I purchase a cisco router, i.e 8xx or 2621XM the question is where do I put it in my current topograpy. Currently we our at a Datacenter and our drop into our cabinet comes right into the Sonicwall and we have all NAT handled there, routing to different LAN ports on the Sonicwall. On LAN side all we have are standard switches supporting all of our Servers.

If I buy a Cisco router to handle my NAT issue for faxing.Do I put it on the WAN or LAN side of my FW?Do I setup the router to handle all of my NATing or just the NATing of my VOIP server that is having issues with the T.38? Would I need a Sonicwall FW if I purchased a CISCO 891?

View 6 Replies View Related

Tray Icon Says Not Connected But Web Works

Dec 8, 2011

Some time ago the mother-board ethernet card on my Dell Dimension 8400 failed, so I fitted a PCI card, and all was well: The failed card was Broadcom NetExtreme 57xx. The PCI one is Realtek RL8139. I got back onto the web, even though one of the (now two icons) in the system tray has a red cross, and all seemed well.

Recently I wanted to set up a home network with a wireless laptop, and though both machines seem to see each other I cannot connect the PC to the LAN to share files. The Ethernet icon in the tray has a red cross, and gives the pop-up "Not Connected - no connections are available". The Network and Sharing Centre will not let me connect, apparently because it thinks I am connected to a public network, which I cannot change to work or home. but it also has a red cross on the PC to Internet connection. If I run the troubleshooter, it cannot find and fix any problems. In the security settings app, I have set the radio buttons to be able to change the status of networks, and to rename them. If I try to connect from the laptop to the PC, I am asked for a network ID and password, but there is nowhere for me to set this up. I have a wireless dongle, but this gives the same symptoms. I am able to connect to a wireless printer (ethernet cable to router, then wireless to the printer).

I have tried many things, always making sure I have Administrator privileges. I don't know whether the problem is that the PC only sees the faulty modem, or is something to do with the public network status, which I have seen as a problem in many other posts, but none of the solutions have worked. I have uninstalled the faulty modem, but obviously cannot physically remove it, as it is part of the motherboard.

System information is thus:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 3070 Mb
Graphics Card: Radeon X300/X550/X1050 Series Secondary (Microsoft Corporation - WDDM), 4 Mb
Hard Drives: C: Total - 152335 MB, Free - 110764 MB; E: Total - 324599 MB, Free - 268186 MB;
Motherboard: Dell Inc., 0J3492
Antivirus: Virgin Media Security Anti-Virus, Updated and Enabled

View 7 Replies View Related

Seeing Dual Computer In System Tray?

Feb 28, 2011

Why do I see two dual computer in my system try in fact I have no LAN card but only Ethernet port only what cause this?

View 3 Replies View Related

Cisco :: Translate Called Number Based On Calling Number?

Mar 26, 2011

I have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.

So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.

View 13 Replies View Related

Cisco Switching/Routing :: Is 4507R FAN Tray Hot Swappable

May 27, 2012

We have a Cisco 4507R switch with sup V. This switch fan tray has partial problem .No light in fan tray. We got another fan tray. Can any one tells me is it hot swappable?

What procedure should I flow without any interruption our live network?

View 4 Replies View Related

Cisco Switching/Routing :: 10G Card On Cat 6513 - Fan Tray No Support

May 8, 2013

I have just buy a 10G card for Cat 6513, these are information: PDCMSFC-1>sh module

Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  2   16  SFM-capable 16 port 1000mb GBIC        WS-X6516A-GBIC     SAL08373Z37
  7    2  Supervisor Engine 720 (Active)         WS-SUP720-BASE     SAD08330322
 
Mod Sub-Module                  Model              Serial        Hw     Status
--- --------------------------- ------------------ ------------ ------- -------
  7 Policy Feature Card 3       WS-F6K-PFC3A       SAD083207AL   2.4    Ok
  7 MSFC3 Daughterboard         WS-SUP720          SAD0832037Y   2.3    Ok
 
About card: WS-X6716-10G-3C

When I install this card on Cat 6513, has a message: " fan tray no support"

View 5 Replies View Related

Local Area Network Connection Disappeared From System Tray

Aug 7, 2011

My local area network connection disappeared from system tray

View 4 Replies View Related

Not Connected Showing In System Tray But Can Browse Internet Fine?

Feb 27, 2011

the little computer icon in the system tray has a red "x" on it and says "not connected" BUT i can connect to the internet connect to websites just fine..why does it say not connected?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved