Cisco Routers :: Part Number For Replacement Of Fan SRP541W

Mar 20, 2013

the small fan of a SRP541w seems to have 'melted'  it's way out of it's casing. How to know part number for a replacement fan for this router?

View 3 Replies


ADVERTISEMENT

Cisco Routers :: Part Number Of RV180W

Aug 30, 2012

There are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?

View 1 Replies View Related

Cisco Routers :: WRP400 Part Number Of Power-supply Of Router

Feb 26, 2013

What is the part number of the power-supply of this router (WRP400)? [code]

View 6 Replies View Related

Cisco VPN :: How To Know ASA 5505 Part Number

Jan 23, 2012

How to know my asa 5505 Part Number

View 2 Replies View Related

Cisco WAN :: The Part Number For Fan Tray WS-C4006-S2

Sep 2, 2007

I have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .

View 2 Replies View Related

Cisco WAN :: Deciding Part Number For WS-C4006-S2 Fan Tray?

Jun 29, 2012

I recently upgraded my home network to include a new DOCIS 3 cable modem (SB 6121), RV 180 router, and a wireless access point.  I have about 7 computers/devices on the network.  A computer connected directly to the new modem was pulling down 30MB/sec (various speed tests), but when RV 180 was inserted between modem and network, downloads dropped to 10MB/sec.  I worked with tech support (very kind), baselined the router, without improvement, and support conclusion was "hardware issue, need to RMA router".The one thing we failed to configure on the router was the Domain Name (Networking/LAN/IPv4 (local network)/DHCP/Domain Name:).  Once I entered the domain name that actually matched the Workgroup / Domain name of the computers on the network, downloads and speed tests jumped to 30MB/sec consistently, and web browsing performance significantly improved. 

View 11 Replies View Related

Cisco Switching/Routing :: 2811 - Fan Part Number

Feb 17, 2007

Whether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).

View 10 Replies View Related

Dell :: Wi-Fi 5300 Part Number For Latitude E4300

Mar 5, 2012

what's the Intel wifi 5300 part number for the Latitude E4300?I bought one off of ebay that seems to be a generic version but Win7 x64 keeps giving a "device cannot start (code 10)" error. The seller insists it should work for a Dell Latitude E4300 and he send me the correct part. I have tried the latest Intel driver to no avail. I might end up getting a refund from the seller.

View 1 Replies View Related

Cisco Switches :: SRW208MP AC Power Adapter Part Number

Apr 13, 2010

What is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?

View 11 Replies View Related

Cisco Firewall :: SMARTnet 8x5xNBD Part Number For ASA5510-SEC-BUN-K9

Apr 13, 2013

I am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco   ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.

1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.

View 1 Replies View Related

Cisco :: CON-PSUS-LMS410K9 Support Contract Part Number

Mar 27, 2012

my company just ordered fornew LMS release and exactly needed the support to open TAC's .I searched but couldn't find the part number for this,some one send me this part number CON-PSUS-LMS410K9,I searched but I could not find anything usefull.

View 2 Replies View Related

Cisco WAN :: Part Number For 887VA-W With IP Services And Image Names?

Nov 22, 2011

I see that if I ask for 887va-sec-k9 I get an 887va with "advanced ip services" instead of the default "advanced security".
 
I can't see a corresponding part number for an 887va-w with advanced ip services. Is there one? Also, what would the part number be for memory to expand a va-w up to the max possible memory?
 
At a guess it would be the same part used to upgrade an 887va from 256 to 768, but since the part to upgrade from 256 to 512 is not the same as the part to upgrade from 512 to 768 I am not sure this is a safe guess.

View 1 Replies View Related

Cisco WAN :: Does RF Section Of Part Number Differentiate From NM-T3 / E3 Card 3945

Jul 19, 2012

We have a NM-T3/E3-RF card that fits inside a 3800, but does not fit into a 3945.  
 
The documentation says it works with 3900 ISR Routers.
 
Is there a cradle or adapter that is required?
 
Does the "RF" section of the part number differentiate this from a NM-T3/E3 card?   

View 5 Replies View Related

Cisco Infrastructure :: 3303 - Part Number Of New Molded AUX Cable

Jan 27, 2004

Subject says it all.  This is the newer style cable that doesn't utilize the separate cable and the grey RJ45/DB25 connector.  It's a one piece black cable that has a molded DB25.
 
the one cable I have lists the following on its label.
 
Cisco
72-3663-01
LDM 3303

View 3 Replies View Related

Cisco Firewall :: ASA 5510 - Part Number For CSC-SSM With Premium Plus License?

Jul 3, 2011

 I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
 
i saw part number  ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
 
Note;i use ASA 5510.

View 1 Replies View Related

Dell :: Inspiron Laptop 1318 Part Number Required

Mar 29, 2013

I have a laptop Dell 1318 Inspiron.  At the extreme right front corner of the unit, there is an open 'wireless' slot.  There used to be something there.  Someone stole it.  I can't find what part to replace it.  My computer does not do bluetooth now.  I had to buy an external Netgear wireless adapter, which uses a USB port that I could use.  What is the original equipment that goes in the slot?  Is that why my BT is not working. <ADMIN NOTE: Email id removed per privacy policy,

View 1 Replies View Related

Cisco Switching/Routing :: 892 Power Adapter Orderable Part Number

Jul 29, 2012

What is the orderable part number of Cisco 892 series routers.

View 1 Replies View Related

Cisco Firewall :: 5512X Any Extra License Or Part Number To Get IPS Features

Apr 30, 2012

url...For the New Firewalls i.e. 5512X , 5515X etc there seems to be integrated IPS and we don't need to order any extra license or part number to get the IPS features .
 
But for the 5585X It says 2Gbps for SSP10 engine but I have seen in the Dynamic Configuration Tool that SSP10 and IPS-SSP10 are different things . Which means that I will have to order 2 service engines SSP10 and IPS SSP10 to get the IPS features and if I only order SSP10 with that Chasis I will only get firewalling  ?

View 3 Replies View Related

Cisco Firewall :: ASA5540-AIP20-K9 / Discover Actual Product Part Number

Nov 16, 2011

how can i discover product actual part number from the device through console.I have a bought a cisco  ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
 
ASA5540-AIP20-K9ASA 5540   Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC   Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA   5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA   5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco   VPN Client Software (Windows, Solaris, Linux, Mac)1Included:   ASA5540-VPN-PRASA   5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included:   ASA5500-ENCR-K9ASA   5500 Strong Encryption License (3DES/AES)1Included:   ASA-AIP-20-INC-K9ASA   5500 AIP Security Services Module-20 included w/ bundles1Included:   ASA-180W-PWR-ACASA   180W AC Power Supply1Included:   ASA-ANYCONN-CSD-K9ASA   5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS   SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1 

View 6 Replies View Related

Cisco WAN :: 3825 Installed DSU / CSU Part Number HWIC-1DSU-T1 In Router / Doesn't Recognize

Apr 18, 2011

I have a 3825 router running 12.4t IOS.  I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it.  Is this the right card for this router?  Is there anything I can look at to determine the issue?  I think the router only has 32M RAM.  Below is a show hardware. Card is still currently installed.

View 2 Replies View Related

Cisco Routers :: Throughput On SB Pro SRP541W?

Jun 2, 2011

i have gotten a question from a partner in regards to the throughput on both LAN and WAN on the SRP541W. I can't really find that on the datasheet.

View 4 Replies View Related

Cisco Routers :: How To Update SRP541w Firmware

Mar 17, 2013

I just bought the SRP541, and it has the old firmware. I downloaded the new firmware, yet I cannot figure out how to install it.

View 3 Replies View Related

Cisco Routers :: SRP541W IPSec VPN Policy

May 15, 2013

Recently we have purchased a few SRP541W for our small branch office VPN sites. While working with the config I have discoved that when trying to create a IPSec VPN policy, I am limited to only one "remote network" entry. This is typically not how VPN tunnels are bulit. We generally put the following remote networks in the tunnel. How do I open a BUG ticket with Cisco and ask that they change the code?

View 3 Replies View Related

Cisco Routers :: SRP541W Max Supported SIP Sessions?

May 9, 2013

I am curious of the max supported SIP sessionf of the SRP500 series.

View 1 Replies View Related

Cisco Routers :: SRP541w DNS Proxy Enabling

May 9, 2012

I'm running FW 1.02.01 (23) and I'm having problems with the DNS proxy.  I have DNS Proxy enabled for my DHCP server on the router and I have my dns server programmed into the global dns location.  I cannot ping any DNS names for my IPSEC VPN tunnel.

View 2 Replies View Related

Cisco Routers :: SRP541W Multiple WAN Configuration

Apr 3, 2013

I have an SRP541W with two ADSL modems attached to it. Both are running bridged mode with PPPoE connections to two different ISPs, (TPG and Telstra Business Direct). The TPG connection is far cheaper, and has a much higher download limit. Sadly, if I leave the router in "load Balance" mode for the WAN, it "prefers" the Tesltra connection because it's faster. I want downloads for movies/music, Youtube, Internet Radio, etc, to go through the TPG connection. Is it possible to do this in the router, or would I need to set up a proxy server, (or some other external device/application)?

View 5 Replies View Related

Cisco Routers :: SRP541w - Values Are Invalid

Feb 2, 2012

We purchased a Cisco 541w router for one of our customers.
 
The main reason was to provide them with 3g backup solution for their business.
 
In order for the router to recognise the 3G router the firmware was upgraded SRP540_1.02.01_023_081211_1136.
 
We arrived on site last night to do the install but couldn't make any changes to the already configured router.  Every time we attempted add a vlan or adjust the dhcp scope the router would return "The values are invalid".
 
Worked at this for over 1 hour and then decided to factory reset the router to see if that would revert the router to use the original firmware.
 
This didn't revert to the previous firmware but we magically could now make network changes without problem.
 
So everything was good, we reconfigured the router, tested 3G and failed the wan1 interface back and forth and the customer was very happy.
 
Customer arrived onsite this morning and the router was running on 3G.  Every 8 - 10 minutes it was attempting a failover between connections.
 
I decided to turn off the failover for the time being and investigate further but yet again i was back to "the values are invalid"
 
We've had to pull the router as the customer is about 2hours away and revert back to their BT router.
 
Found this document for another SRP model - A warning message may appear in the Basic Wireless Settings screen with the text “The values are invalid” when modifying the wireless profile. Set the SRP 521W to its default setting (CSCtd49614).
 
[URL]
 
Will firmware SRP540_1.2.4_003_011112_1847 released only 2 days ago cure the problem?

View 1 Replies View Related

Cisco Routers :: SRP541W Remote Web Access Over IPSEC VPN?

May 9, 2012

I'm running FW 1.2.4 and how to setup Remote Web Access over my IPSEC vpn tunnel.  I would like to be able to remotely access these routers and make configuration changes from my main office but I cannot seem to figure out how to get it to work.  If I try to access the internal router IP from across the VPN, I cannot.  My VPN tunnel is up and operational and I can ping various devices across the tunnel but I cannot access the web management of the router.

View 4 Replies View Related

Cisco Routers :: SRP541W Router - Custom Dynamic DNS

Mar 25, 2013

I'm wondering if there is a possibility to get my homepage provider's custom dynamic DNS service working on my Cisco SRP541W Router as I'd not like to be forced to sign up for either DynDNS or TZO which are available through the web frontend.

View 1 Replies View Related

Cisco Routers :: SRP541w - Configure Remote VPN Connection

Jun 20, 2012

I've configured an srp541w router for a customer and successfully configured an IPSEC VPN connection with a Netopia router at a satellite office for the customer.
 
I cannot seem to find a way to configure either a PPTP VPN connection or QuickVPN connection for remote users.  I did read something that stated that the router will only support either a site-to-site VPN or a QuickVPN connection, but not both at the same time. 

View 2 Replies View Related

Cisco Routers :: SRP541W Multi Vlan Setup?

Nov 19, 2012

I am using an SRP541W router and i am trying to configure 2 vlans, each one to use its own Wan:Here are the dhcprules and vlans:As can be seen, each one has its own wan interface.
 
Vlans:As can be seen, each vlan is using its own ports and dhcp rule, so, now they should be separate.
 
Both Wans are connected: So now (at least as i see things) the two vlans are separate and using different Wan. But the reality is different, everything is going out using Wan1.Also in the Interface Info you can see that the 2 vlans are listed under the Wan1.
 
The rest of router setting are default. 

View 17 Replies View Related

Cisco Routers :: 2700 - SRP541W Disable DHCP

Apr 24, 2013

We have an SRP541W on which I thought I had disabled DHCP, its turns out that in fact I haven't. After seaching again for the DHCP on/off funtion I found it under the Vlan settings (Wierd place to put it I thought).
 
The Router has a static ip address on the LAN side of 192.168.1.254 and is connected to a Cisco 2700 series on the WAN side. Our network DHCP is served by an SBS 2011 server hence my reason to switch off DHCP on the router. However when I select Static IP address from the Address Type in the VLAN settings and try and save the changes I get an error that is IP Address / Subnet Mask value is illegal. Great but why when the router has and IP address assigned and the subnet mask is set do I get this error. On the VLAN settings page there is no option to set an IP Address

View 4 Replies View Related

Cisco Routers :: SRP541W / Setup IPSEC Tunnel To Be Able To Go From Subnet?

Jun 12, 2012

Is there any way to setup an IPSEC tunnel to be able to go from my subnet, 192.168.75.x and be able to reach anything on the other side of the tunnel, 192.168.X.X?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved