I have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .
View 2 RepliesI recently upgraded my home network to include a new DOCIS 3 cable modem (SB 6121), RV 180 router, and a wireless access point. I have about 7 computers/devices on the network. A computer connected directly to the new modem was pulling down 30MB/sec (various speed tests), but when RV 180 was inserted between modem and network, downloads dropped to 10MB/sec. I worked with tech support (very kind), baselined the router, without improvement, and support conclusion was "hardware issue, need to RMA router".The one thing we failed to configure on the router was the Domain Name (Networking/LAN/IPv4 (local network)/DHCP/Domain Name:). Once I entered the domain name that actually matched the Workgroup / Domain name of the computers on the network, downloads and speed tests jumped to 30MB/sec consistently, and web browsing performance significantly improved.
View 11 Replies View RelatedHow to know my asa 5505 Part Number
View 2 Replies View RelatedThere are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?
View 1 Replies View Relatedthe small fan of a SRP541w seems to have 'melted' it's way out of it's casing. How to know part number for a replacement fan for this router?
View 3 Replies View RelatedWhether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).
View 10 Replies View Relatedwhat's the Intel wifi 5300 part number for the Latitude E4300?I bought one off of ebay that seems to be a generic version but Win7 x64 keeps giving a "device cannot start (code 10)" error. The seller insists it should work for a Dell Latitude E4300 and he send me the correct part. I have tried the latest Intel driver to no avail. I might end up getting a refund from the seller.
View 1 Replies View RelatedWhat is the SRW208MP AC Power Adapter Part Number and where can it be ordered from ?
View 11 Replies View RelatedI am trying to find the part number for the Cisco SMARTnet Maintenance 8x5xNBD for the Cisco ASA5510-SEC-BUN-K9. I browse cisco website, tried dynamic config tool, forums etc but no luck.
1: How to know the part number for it.
2: Which tool can be used to find smartnet or other Maintenance details/partnumbers
3: Is there any specific tool other then Dynamic Config to generate BOM.
my company just ordered fornew LMS release and exactly needed the support to open TAC's .I searched but couldn't find the part number for this,some one send me this part number CON-PSUS-LMS410K9,I searched but I could not find anything usefull.
View 2 Replies View RelatedI see that if I ask for 887va-sec-k9 I get an 887va with "advanced ip services" instead of the default "advanced security".
I can't see a corresponding part number for an 887va-w with advanced ip services. Is there one? Also, what would the part number be for memory to expand a va-w up to the max possible memory?
At a guess it would be the same part used to upgrade an 887va from 256 to 768, but since the part to upgrade from 256 to 512 is not the same as the part to upgrade from 512 to 768 I am not sure this is a safe guess.
We have a NM-T3/E3-RF card that fits inside a 3800, but does not fit into a 3945.
The documentation says it works with 3900 ISR Routers.
Is there a cradle or adapter that is required?
Does the "RF" section of the part number differentiate this from a NM-T3/E3 card?
Subject says it all. This is the newer style cable that doesn't utilize the separate cable and the grey RJ45/DB25 connector. It's a one piece black cable that has a molded DB25.
the one cable I have lists the following on its label.
Cisco
72-3663-01
LDM 3303
I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
i saw part number ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
Note;i use ASA 5510.
I have a laptop Dell 1318 Inspiron. At the extreme right front corner of the unit, there is an open 'wireless' slot. There used to be something there. Someone stole it. I can't find what part to replace it. My computer does not do bluetooth now. I had to buy an external Netgear wireless adapter, which uses a USB port that I could use. What is the original equipment that goes in the slot? Is that why my BT is not working. <ADMIN NOTE: Email id removed per privacy policy,
View 1 Replies View RelatedWhat is the part number of the power-supply of this router (WRP400)? [code]
View 6 Replies View RelatedWhat is the orderable part number of Cisco 892 series routers.
View 1 Replies View Relatedurl...For the New Firewalls i.e. 5512X , 5515X etc there seems to be integrated IPS and we don't need to order any extra license or part number to get the IPS features .
But for the 5585X It says 2Gbps for SSP10 engine but I have seen in the Dynamic Configuration Tool that SSP10 and IPS-SSP10 are different things . Which means that I will have to order 2 service engines SSP10 and IPS SSP10 to get the IPS features and if I only order SSP10 with that Chasis I will only get firewalling ?
how can i discover product actual part number from the device through console.I have a bought a cisco ASA5540-AIP20-K9 and i want to check either is the product is shipped us as a right product.And i want to check total BoM requriements from entering the ASA console through any CLI Command.Below My Cisco ASA BoM which i purchased.
ASA5540-AIP20-K9ASA 5540 Appliance w/ AIP-SSM-20, SW, HA, 4GE+1FE, 3DES/AES1CAB-ACUAC Power Cord (UK), C13, BS 1363, 2.5m1SF-ASA-8.3-K8ASA 5500 Series Software v8.31SF-ASA-AIP-7.0-K9ASA 5500 Series AIP Sofware 7.0 for Security Service Modules1ASA-VPN-CLNT-K9Cisco VPN Client Software (Windows, Solaris, Linux, Mac)1Included: ASA5540-VPN-PRASA 5540 VPN Premium 5000 IPsec User License (7.0 Only)1Included: ASA5500-ENCR-K9ASA 5500 Strong Encryption License (3DES/AES)1Included: ASA-AIP-20-INC-K9ASA 5500 AIP Security Services Module-20 included w/ bundles1Included: ASA-180W-PWR-ACASA 180W AC Power Supply1Included: ASA-ANYCONN-CSD-K9ASA 5500 AnyConnect Client + Cisco Security Desktop Software1CON-SU1-AS4A20K9IPS SVC, AR NBD ASA5540 w AIP-SSM-20,4GE + 1FE,3DES/AES1
I have a 3825 router running 12.4t IOS. I installed DSU/CSU part number HWIC-1DSU-T1 in the router and it does not recognize it. Is this the right card for this router? Is there anything I can look at to determine the issue? I think the router only has 32M RAM. Below is a show hardware. Card is still currently installed.
View 2 Replies View RelatedRight Now we are using Cisco switch model c4006.and we are looking to replacement for the same . Below are our requirements.
1: Around 120 Ports (100 Mbps)
2: Around 30 Ports (1Giga)
3: Layer2/Layer3
I have some problem with WS-C4006 Cisco Catalyst that LMS doesn't collect and put into "never collected" area. I also see that those devices doesn't show the classic prompt ">" and "#". Could be the main problem ? If yes how can configure LMS to recognize a different prompt for devices.
View 1 Replies View RelatedSome time ago the mother-board ethernet card on my Dell Dimension 8400 failed, so I fitted a PCI card, and all was well: The failed card was Broadcom NetExtreme 57xx. The PCI one is Realtek RL8139. I got back onto the web, even though one of the (now two icons) in the system tray has a red cross, and all seemed well.
Recently I wanted to set up a home network with a wireless laptop, and though both machines seem to see each other I cannot connect the PC to the LAN to share files. The Ethernet icon in the tray has a red cross, and gives the pop-up "Not Connected - no connections are available". The Network and Sharing Centre will not let me connect, apparently because it thinks I am connected to a public network, which I cannot change to work or home. but it also has a red cross on the PC to Internet connection. If I run the troubleshooter, it cannot find and fix any problems. In the security settings app, I have set the radio buttons to be able to change the status of networks, and to rename them. If I try to connect from the laptop to the PC, I am asked for a network ID and password, but there is nowhere for me to set this up. I have a wireless dongle, but this gives the same symptoms. I am able to connect to a wireless printer (ethernet cable to router, then wireless to the printer).
I have tried many things, always making sure I have Administrator privileges. I don't know whether the problem is that the PC only sees the faulty modem, or is something to do with the public network status, which I have seen as a problem in many other posts, but none of the solutions have worked. I have uninstalled the faulty modem, but obviously cannot physically remove it, as it is part of the motherboard.
System information is thus:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 3070 Mb
Graphics Card: Radeon X300/X550/X1050 Series Secondary (Microsoft Corporation - WDDM), 4 Mb
Hard Drives: C: Total - 152335 MB, Free - 110764 MB; E: Total - 324599 MB, Free - 268186 MB;
Motherboard: Dell Inc., 0J3492
Antivirus: Virgin Media Security Anti-Virus, Updated and Enabled
Why do I see two dual computer in my system try in fact I have no LAN card but only Ethernet port only what cause this?
View 3 Replies View RelatedI have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
We have a Cisco 4507R switch with sup V. This switch fan tray has partial problem .No light in fan tray. We got another fan tray. Can any one tells me is it hot swappable?
What procedure should I flow without any interruption our live network?
I have just buy a 10G card for Cat 6513, these are information: PDCMSFC-1>sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL08373Z37
7 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD08330322
Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
7 Policy Feature Card 3 WS-F6K-PFC3A SAD083207AL 2.4 Ok
7 MSFC3 Daughterboard WS-SUP720 SAD0832037Y 2.3 Ok
About card: WS-X6716-10G-3C
When I install this card on Cat 6513, has a message: " fan tray no support"
My local area network connection disappeared from system tray
View 4 Replies View Relatedthe little computer icon in the system tray has a red "x" on it and says "not connected" BUT i can connect to the internet connect to websites just fine..why does it say not connected?
View 3 Replies View Relatedlost connection and can't find icon in system tray or anywhere else to search for wireless routers in range.
View 1 Replies View RelatedI have a inspiron 1525 and 9 times out of 10 when I start up the computer I get the message "Dell wireless WLAN card wireless network tray applet has stopped working". When this happens I can still get on the internet. But I can't scroll the screen using the touchpad. Dell installed a new touchpad and that worked for about one day. I hooked up with them online twice and one tech updated the touchpad driver and another said it was my avast software that causes the problem, I say no way, because it worked for 6 months before this problem started.
View 4 Replies View RelatedI currently have a VSS setup on 2 6509-E using 2x VS-S720-10G.Today I tried to install 2x X6708-10G-3CXL, one into each chassis. The first log message I got was that fan tray was going into high-speed mode, is this correct?I then installed the second card in the 2nd chassis and it killed my VSS and proceed to reload the switches. it now also appears to have killed one of my WS-X6724-SFP cards, as it no-longer boots and I get the following errors:
000249: Jan 8 12:52:34.201 GMT: %DIAG-SW1_SP-3-MAJOR: Switch 1 Module 1: Online Diagnostics detected a Major Error. Please use 'show diagnostic result <target>' to see test results.000250: Jan 8 12:52:34.205 GMT: %CONST_DIAG-SW1_SP-3-BOOTUP_TEST_FAIL: Switch 1 Module 1: TestLoopback
Also I can't read any of the log files in 'bootflash diaginfo' as it says the file doesn't exist.Everytime I know re-insert the WS-X6724-SFP cards it kills the VSS
Recently purchased a Lenovo Ideapad Y580 and performed a fresh install of Win 7 Premium 64-bit on a new SSD. Installed latest drivers for all hardware but discovered after the install that my wireless adapter wasn't able to find any wireless networks (it worked find under Windows 8 when laptop was first unboxed). My wired connection works fine though, I am able to connect up to my network without issue using a network cable. Also, I am able to connect to my home wireless network without issue using another laptop.In addition, the adapter icon in my tray shows a red-X on it. I've found many issues through web searches that suggest driver updates or hardware disable/enable steps but neither of these approaches have worked for me. I am holding off re-installing my OS until I've tried some more simpler and less time consuming options. [code] When I run a hardware test via the Intel Wi-Fi manual diags I get the following: "Wireless Hardware is not bound to transport driver".
View 1 Replies View Related