D-Link DWA-125 Produced USB Device Not Recognize In XP
Apr 9, 2012
I have an old Compaq PC that's running Windows XP SP3 and for quite some time has not had problems with networking or using this wireless adapter. But not long ago the network interface disappeared and the adapter was now being shown in the Device Manager as an unknown device. If you pulled the adapter out and reinserted it you'd get a message on screen that would say something to that effect.
There are two computers next to each other that both use this exact same adapter and I've tried swapping them between the PCs to see if one adapter worked better than another. They both work in one PC and neither work in the PC I'm having trouble with.
View 1 Replies
ADVERTISEMENT
Mar 21, 2012
Have an hp pavilion a1700n with amd athlon. I switched from Vista to XP, but it's not recognizing some drivers. The network card is not detected on my pc, however the device manager says is working properly!!!??? What can I do? I need to connect to the internet in order to download the other drivers.
View 1 Replies
View Related
Aug 30, 2012
co worker brought me his comuter to reinstall windows xp, because he did not like vista, he also had his own xp discs, i have done everything like normal, have done this a time or two not my first rodeo with reinstalling windows xp, this is however the first time that this network issue has happened, i have installed the device driver cd as well along with the reset tool from dell's website, im getting NOWHERE.
View 1 Replies
View Related
Apr 4, 2013
After using my 2 TB WD network storage device on other systems both wirelessly and via an ethernet connection, I decided to install the device on a new system via a wired connection. Unfortunately, my computer (WIN XP) won't recognise the device when using a direct connection though my talk talk supplied D-LINK wireless router. I have contacted WD and talktalk and gone through all the diagnostic processes but it still won't recognise the device. I have been able to connect this device through an older D-LINK router (still wireless) on the same talk talk ISP with no problems so I can't understand why it won't connect here. The WD device reports no problems but I can't access it, even when all firewall and AV programs are disabled.
View 3 Replies
View Related
Nov 29, 2011
Model E1000
I wrote down the password of my wireless router on installing it. However, each time I want to add a new device to the router, the password that I wrote down does not prompt the router to recognize the new device or equipment. How do I go back into my computer and retrieve the password to my router if I did copy it down wrongly? how to retrieve the password.
View 2 Replies
View Related
Mar 3, 2012
I bought a Wireless-N Home Router MODEL WRT120N so that I could use my new Kindle Fire online, since I could never catch an open wi-fi signal in my house. Router IS correctly installed and working fine.....but when I go to use my Kindle, I see it on the list, click on it, enter my password.......and it tells my my password must be incorrect. I KNOW it is correct! I even went and CHANGED the password just in case!
My Kindle keeps giving the message "Unable to connect to the selected Access Point. Please check the password you have provided."
View 8 Replies
View Related
Mar 21, 2011
d-lINK n-300 (DIR-615) Wireless Router HW/Ver: E1, F/W Ver: 5.00NA
I am having a problem with the DIR-615 router seeing my printer on a wired network. The printer is a Brother HL-2170W (also capable of a wireless connection). All other network PC's connect okay. I have attempted both wired and wireless connection procedures that came with the printer with no luck. The DIR-615 router does not see the printers IP address. How can I get the router to recognize the printer?
View 1 Replies
View Related
Oct 11, 2012
Region : Belgium
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : 3G mobile
My router TL-MR3420 does not connect to my 3G modem. I did all the steps according to the router configuration. Despite of that, once it is on the status it doesn�t recognize my modem, HUAWEI, model number E1820.
View 5 Replies
View Related
Dec 2, 2011
Have hooked up a DIR-825 to an iMac and it works well on 2.4GHz band. Having issues seeing 5GHz band as it comes and goes. Just today bought a DWA-160 USB adapter hoping it would connect the kid's PS3 to the 5GHz band but the PS3 wont accept or recognize either the DWA-160 or the 5GHz band.
Can't find any solutions in the manuals.Desperate for a fix as the wife and I want to be able to work on the 2.4GHz without being constantly kicked off by the kids on the PS3.
View 4 Replies
View Related
Jan 22, 2013
I have multiple computers on my network as well as cell phones logging in as wifi. At least once a day I have trouble or another computer has trouble getting on line through my network. I have to unplug my router and replug. Its as if it doesn't recognize the ip address until reboot.
View 1 Replies
View Related
Mar 25, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : aircel,idea
I bought this router just today, but it cant recognize my huawei e303c 3g modem.i've upgraded the firmware. This router supports the dongle or not?
View 2 Replies
View Related
Dec 28, 2010
DGL-4100
-> Wii
-> X360
-> PS3
-> DGS-2205 (gigabit switch in study)
*-> My PC
*-> Her PC
*-> DAP-1522
We're on the 192.168.1.x domain, and I've already hooked my PC up directly to the DAP-1522 and switched its IP address. So now, I can connect to it through the switch. I've renamed it, set it to WPA2 with a passphrase, and should be set to go. However, I can't get my laptop, IPod touch, or any devices to see it. Also, the DGL-4100 doesn't list it under the DHCP clients, but as I've got the DAP-1522 set to a static IP of 192.168.1.50.
View 1 Replies
View Related
Apr 8, 2013
Region : Brazil
Model : TL-WR470N
Hardware version: v2 Firmware version
latest (updated yesterday)
ISP:
My Iphone doesnt recognize my printer (HP Photosmart D110a) when I try to print something from it by AIRPRINT. After updated my printers and routers firmwares, the problem continues. Ive been read a lot and seems that the problem is caused by a problem with IGMP or Multitasking protocol.... But I dont find these in my routers page even after updated my firmware.
View 3 Replies
View Related
May 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
I've been using this router for almost 2 years and it has been excellent but since 2 weeks ago it has stopped recognizing anything connected to the LAN port 1 and the WAN port, so it becomes useless as a router because I cannot connect a cable modem. The cable modem was tested successfully with a direct connection to a computer but it doesn't work with the router, and also ANYTHING you connect to these ports on the router is not detected, the lights do not turn on.
View 3 Replies
View Related
May 31, 2011
When installing the DIR-615, router installs, but error msg that there is no internet connection. SmartConnect is plugged into the WAN and I have tried the ethernet cable to the computer in spots 1 & 2. Good connection when SmartConnect modem is connected to computer directly.615's Internet indicator will turn green for a while, usually less than a minute or two, then flashes, then may actually cause the routers status indicator to flash off, then back on. Like a reset.
View 2 Replies
View Related
May 10, 2013
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
View 6 Replies
View Related
Mar 14, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Others
Model : TL-MR3220
Hardware Version : V1
Firmware Version : latest
ISP : Orange
The TL-MR3220 takes a long time to identify the 3g modem and sometimes it will not identify it at all and says "unplugged". Sometimes "unplugged" suddenly apears after the modem has been identified and was working properly.Is this the normal behavior of this device ? Why ? What can be done ? I'm Using Alcatel X500D 3g modem.
View 5 Replies
View Related
Jan 27, 2013
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
ISP : Centurylink
I am replacing my qwest/centurylink actiontec q1000 with the td-w8960n. I have run all the different setups, with the different settings that I have found on the net but to no avail. The one thing I have noticed is that the light for the asdl on the td-w8960n does not come on, but yet when I plug it back into the actiontec it sees it and the internet works. Any reason why the td-w8960n is not recognizing the active dsl line?
View 6 Replies
View Related
Jan 22, 2013
Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : UPC Hungary Ltd.
I can't able to recognize a system - all wifi clients lose connection. When this happens, the ping answer time rech the ~2000 times, then totally lose the connection, the SSID is dissapear - checking with my phone (android - wifi analyzer) and TL-WN822N USB wifi adapter (with the inSSIDer application). Meanwhile the cable clients and the WAN connections works fine, didn't experience anything.If I restart the wifi service with the hardware on/off button, it runs well for some time.This problem appeared when I used the two older official firmware too.
I tried the auto-chanel function width auto channel width, tried to manually set up one of the less interfered channels with both 20MHz and 40MHz channel width, but none of them bring the solution.The intresting thing is, if I change the router with an old D-Link DI-604, the signal is weak, but the wifi connection is stable, with the same TL-WN822N adapter.I tried to guarantee the router, but after two weeks, my reseller said, it looks ok, they - at the TP-Link service - didn't find anything.
View 7 Replies
View Related
Nov 20, 2011
I have a DIR-655 Rev B, in a typical cascaded config: modem > dir-555 > switches & devices, etc.One of the four dir-655 ports is connected to a cheap-o Belink Wifi router which I use as an access point (I only use this because there's one device that only supports WEP). I was debugging a WiFi issue and I pulled the plug on this Belkin just to get it out of the picture. Well, when I did that, EVERYTHING that was connected through the DIR-655 lost connection. (Well, all the wired stuff anyway- not sure about WiFi devices through the DIR-655). I noticed that the port link light for the powered-off device stayed on on the DIR-655. When I unplugged the cable from the DIR-655, everything went back to normal.
So what I'm trying to figure out now is, is this a DIR-655 issue, or is it something screwy with the Belkin? Or Both? I've got to assume that there's some inherent flaw in the DIR-655 that allows something connected to a port to screw up everything that it's hosting.
View 7 Replies
View Related
Jan 2, 2013
Here's the situation, 2 houses, house #1 has internet, DIR-665 connected to Cable modem, between the 2 houses CAT 6 cable, house #2 has DIR-655. Both houses need to offer wireless. How should the DIR-655 (house#2) be set up? (SSID/DHCP/UPNP/IP/GATEWAY/SUBNET, etc)?
View 1 Replies
View Related
Aug 30, 2011
I have a Netgear media player that I need to keep separate from my LAN. I have a switch that's connected to WAN and from the switch to dir-655 and the Netgem box. So I have two IP:s and the Netgems traffic is not going through the router at all.Now I'm short of LAN ports and I bought an eight port switch. However I only have room for keeping two devices at the space they are at. So I need to get rid of the old switch and somehow manage the network(s) with dir-655 and the new switch.The way I see it, I should connect WAN to dir-655 and from there to the switch and connect the Netgem box to router. But how can I configure dir-655 so that the Netgem is not on LAN with other devices?
View 6 Replies
View Related
Feb 8, 2011
I had a Linksys BEFSR41 router with AppleTV 1stGen with 0 problems.Now I have a DIR-655 Vb1 2.00NA firmware and itunes now cannot find the AppleTV as a device. I have tried resetting the AppleTV to factory defaults re-installing latest firmware and reinstalling itunes, powering down all devices etc., and no way can itunes find the appleTV although the appleTV is on the net and seen by the router.I have gone to a wired connection to the router too because the router kept dropping the wireless connection to the router too. Of course I got the DIR-655 for wireless
View 15 Replies
View Related
Apr 5, 2012
I have a media player wired to my dir-655. I have a wrt300 on the same network to use for vpn. I live in Canada, and to use Netflix etc, from the US, I need to use the vpn.Is it possible to have the media player routed through the wrt300, rather than discovering all the IP addresses for Netflix etc and routing each one?
View 3 Replies
View Related
Mar 27, 2011
Should the DIR-655 list all devices that are accessing either my WAN or another device on the LAN, assuming there are no other switches on the network, and all traffic is going through the DIR-655?
I was trying to determine the IP, and MAC address of an AT&T Microcell connected to my network. I have no physical access to Microcell. I have been able to find the IP address, in the logs of the DIR-655, but nowhere else. Shouldn't it be listed under SETUP -> NETWORK SETTINGS -> NUMBER OF DYNAMIC DHCP CLIENTS?
View 2 Replies
View Related
Dec 5, 2010
I have a "vpn device" (that is what they called it to me) basically its a custom no-name black box with a lan and a wan port that my office gave me. It is running url... vpn connection to my office automatically so no computers have to run a vpn client locally. "It just works".Previously I had a DL 4300 set to bridge mode so I could get wifi. VPN device doesnt have wifi
I replaced the DL-4300 with a 655 because I wanted N speed for wifi and I got a DAP 1522 to wirelessly bridge my dvr and a htpc.I have read through the many threads of the 655 and bridging and it being removed and I'd love to use the 655 as my router to take advantage of all the other routing features, but alasSo here is my setup as of now, they set my vpn to be 10.86.83.1 so that is my network.Cable Modem -> pfSense -> switch ->
-> office computers and printers
-> DL 4300 10.86.83.2 (I'll soon disable this and remove it, or maybe setup another remote ap in future)
-> DIR 655 10.86.83.3 (using Lan port not wan port)
Laptops/phones connecting to new 655 wireless SSID, however I'm not sure how you tell if its using the DAP1522 or the 655 or is that just seemless and I shouldnt know?Also I couldnt get a dhcp via the 655-> ... -> DAP 1522 from the pfSense router. So I just enabled DHCP on the 655 and now I get ip and internet access.Really have no idea how that is working having 2 DHCP servers, but I guess they are smart about it (for now..or just lucky)
View 1 Replies
View Related
Jan 19, 2011
I have a D-Link DIR-655 REV.B and have no luck getting my Nettalk Duo device to work with it. I have tried forwarding all of the needed ports and even placing the device in the DMZ but can't get it to work with this router. I have noticed that this router has no way to disable SIP ALG which should eliminate the issues I am having. Why would D-Link give us no way to disable this "feature" that is known to cause issues with VOIP devices?
View 14 Replies
View Related
Nov 1, 2011
I get this message in response to clicking on "Diagnose Connection Problems" which was returned to me in I.E. 9 after visiting yahoo.com, other sites and most interestingly, even after trying to get to my DIR-825 at IP address 192.68.0.1. The only common element here is the DIR-825 so I suspect there may be some kind of misconfiguration in the device. The only way that I have been able to clear this condition is to reboot or repower my DIR-825.
View 7 Replies
View Related
Oct 9, 2011
Problems have arisen since purchasing a new laptop with Windows 7. The problem seems erratic. The laptop connects to file servers on the network, but often cannot connect to the network. If it connects, often connection is lost when clicking to a new page.Usual error message: "Windows can't communicate with the device or resource (primary DNS server)"Network map shows communication lost between ADSL and network.Direct Hard wire connection to internet through ADSL works without issue. Hardwire connection through DIR-655 same as wireless: erratic, error messages. This message posted from another wireless router, specifics not known, connected without issue, on-line for 3 hours without problems.
-IP address: no difference between using automatically obtained or assigned IP address
-DNS server: no difference between using automatically obtained or assigned IP address
Router setup numerous times using CD ROM set up program.Firmware updated to the most recent version.Gone to tech support several times; can get the PC to connect and once done, tech support says its working only to disconnect within a few minutes.What must I do to get this DIR-655 router working on a regular basis?
View 7 Replies
View Related
Aug 25, 2011
My Samsung phone is working as it should as an USB device (using KEIS and such). However though it receives ip address from DIR-655 router and is registered by MAC address in router - also possible to ping its IP from windows I cannot see it in /Network from my WIN7 64bit OS? The desktop comp is wired to the router, phone is on wireless.
I ve tried several settings and almost had it. It did work some months ago...
From log; "SSID": Wireless system with MAC address XXXXXX secured and linked" (That is my mobile phone)
View 14 Replies
View Related
Dec 26, 2012
Region : Austria
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
unfortunately I've lost my device pin and I've reset my device.can I get the device pin on a other way? on my invoice there is no information about that.
View 1 Replies
View Related
Feb 21, 2013
How do i stop a Wireless device from connecting to the router? i attempted to find an answer myself and failed
View 1 Replies
View Related
Aug 10, 2010
set up the wireless network at a friend's house, which is a large solid-brick house that winds from one end to the other. The current location of where the cable comes into the house is unfortunately on the far-left end of the house, which means that the right end of the house receives no signal from their DIR-825 wireless N router.
What I've been looking into is the best way to wirelessly extend the wireless signal to the other end of the house. It seems straightforward enough to use an ethernet cable and access point to extend a wireless network, but that is not really a good option for this house. After reading many forum posts (and not being an expert myself) it seems like it may be possible to wirelessly extend the wireless network with another router, although it appeared that this is much less common (if at all possible) with wireless N routers.
what device I need to accomplish what I've described above? Another router, or some kind of access point/bridge? I saw at least one rather expensive wireless N repeater online (a Hawking brand, I believe) but was hoping to avoid that option initially, but if that is the only way to go then so be it :-)
View 12 Replies
View Related
