D-Link DIR-655 :: Stop Wireless Device From Connecting To It?
Feb 21, 2013How do i stop a Wireless device from connecting to the router? i attempted to find an answer myself and failed
View 1 Replies
ADVERTISEMENT
TP-Link ADSL2+ Wireless :: TD-W8950ND Modem Router To Stop Dhcp / Dns Provided By Device
Apr 9, 2013Region : Australia
Model : TD-W8950ND
Hardware Version : V1
Firmware Version : 1.2.9 build 110212 Rel.22296n
I made some changes on my wireless modem router to stop dhcp and dns provided by my device. A server is now doing it, but at the same time I appear to have connection issues where I didn't before. In an attempt to resolve the issues I looked at the System Log and a number of things were coming up that concerned me. These are as follows:
-user: tr69c: Unable to retrieve attributes in scratch PAD
-user: Stored Parameter Attribute data is corrupt or missing
Additionally I'm getting a lot of kernel: Intrusion alerts which I can't determine how serious they are. Where to start tracking down these issues (if they even warrant investigation).
Why Would Computer Stop Connecting To Wireless Router
Jun 21, 2011I have a touch screen packard bell comp and all of a sudden i cant connect at all to the wireless router yet we can connect to the router with ipod and phones, does this mean there is summat wrong with my computer? its only two months old
View 3 Replies View RelatedLinksys Wireless Router :: WRT54G - Websites / Wireless Device Stop Working?
Aug 12, 2008wrt54g v1.1 After setting up the wireless router, I can use the internet on the pc as well as a wireless device. However after putting my pc in standby mode then back on, I can no longer connect to either. I have to restore factory defaults each time and re-enter all passwords and settings.
View 9 Replies View RelatedCisco Wireless :: 2504WLC - Stop Connecting Kindles By Network
Jun 16, 2013I have 2504 wlc, 1142n ap's and a windows radius server.Users have figured out that they can connect their kindles to the wireless by using there network login credentials. How can I stop this? Change authentication from user or computer to just computer?
View 5 Replies View RelatedBroadband :: Computer Stop Connecting To The Internet?
Jan 4, 2011I have this new problem, when I start my computer its connect fine to the internet, after a while its stop and lag after that but the modem is working fine and even with my laptop works also fine I've use HiJackThis and I got this:Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 09:57:27 م, on 04/01/11
Platform: Windows 7 (WinNT 6.00.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16385)
Boot mode: NormalRunning processes:[code]......
Linksys Cable / DSL :: WGA120N Suddenly Stop Connecting
Jan 20, 2011I've got this router for 3 days, I configured it for Polish neostrada (TPSA), its works perfect for 3 days (until today morning). Now i cannot connect to ADSL, on info page its everything correctly. I only cannot connect (after pressing Connect page reload and nothing changed). My orgiginal Livebox from provider works (it have build in settings). I tried to reflash firmware and restore to factory settings (i tried too wizzard from CD and simple writing on info page).Wi-Fi + Ethernet works, I only cannot conect to ADSL (i tried PPPoA and PPPoE, all settings what my provider has on his page).
View 1 Replies View RelatedTp-link 150mbps Wireless :: How To Stop Wifi Signals
Jan 26, 2013Region : Australia
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :
I have TL-WR740N router. I dont know how to stop and start wifi signals.
TP-Link 150Mbps Wireless :: TL-WR741ND Suddenly Stop Working?
Apr 21, 2013Region : Others
Model : TL-WR741ND
Hardware Version : Not Clear
Firmware Version :
ISP :
after year and a half of using TL-WR741 ND router, it suddenly stop working during the night. I have no problems with router before this happened (I think only one or two reset in 1 year and 6 months). System led light does not flash (some sytem error) and I can't access to 192.168.1.1 router setup site. I tried almost everything, unplug power, reset etc. for almost 100 times, reconnect the router with modem and PC in all posible ways, but still can't establish connection or even access to router's setup. Obviusly internet works fine?
Connecting USB Internet Device Directly To Wireless Router
Aug 9, 2012I want to buy a wireless router to which I can connect my USB internet device directly, so I don't have to turn on my PC all the time if I just want to use my moble phone or iPOD or other family members wanting to connect to internet.
View 1 Replies View RelatedUverse Wireless Router - Laptop Not Connecting Internet With New Device
Apr 4, 2011I have a compaq laptop running Vista. We recently had our Uverse wireless router/modem replaced. Now my laptop will not connect to the internet. The laptop connects to the router but shows up as local connection only. Uverse tried all kinds of differant things to no avail. The laptop will hookup with a USB modem but I would like to get it back to how it was before.
View 14 Replies View RelatedDLink Router - Connecting Wireless Device To Hardwired Network?
Feb 7, 2011I have just purchased a new ASUS Laptop for my wife.We are currently running two destop computers on a D LinK Router. How do I go about including the new computer on the network wirelessly?What do I need to purchase to make the transition easiest? The two desktops are running Windows XP Professional, the new system is Windows 7.
View 4 Replies View RelatedLinksys Wireless Router :: Ea4500 - One Device Not Connecting To Wifi Network
Feb 3, 2013I just purchased a Linksys EA 4500.I set up the wifi properly, with laptops, tablets, smartphones and printer. The wifi network worked fine for a couple of days.But now one of the laptop "refuses" to see the Linksys wifi network. The other devices are still connected and running regularly.
The notebook that does not connect anymore is an ACER 5740DG with an Atheros Network adapter and Windows 7 installed. This notebook is otherwise running fine.At the beginning it was connecting ok and we never had any problem at all with the previous router Belkin_N+_7991AC, that I changed just for speed.
Now the Linksys network is simply not visible to such notebook in the "Available Connections List" that I get clicking on the WiFi icon in the bottom right, while a number of other wifi networks (not mine) are clearly visible. Of course I restarted the notebook properly. For one time I got the visibility of the Linksys, I entered the password and then it was not possible to see the network anymore.No error message from Smart WiFi software.
Linksys Wireless Router :: E4200 Browsing And Connecting To Device Closing Window?
Feb 9, 2011Last week I purchased the E4200 and for simplicity, I configured it with basic settings using Cisco Connect. Today, I went into the web interface. The only thing I did was review settings and get the Routers PIN (it appears that Intel Chipset cards on Windows requires this PIN?) Close the browser (did not save any settings) and now I am completely locked out of the device. Cannot connect does not accept the wireless password. I hard reset the device, ran through the wizard. Everything was working again. Launch the browser and connected to the device closing window and balm?
View 9 Replies View RelatedD-Link DIR-655 :: Cisco VPN - DNS Stop Working
Oct 22, 2012Whenever I start a Cisco VPN from any machine on the network, DNS requests to the DIR-655 stop working. If I reboot the router, DNS starts working again (the VPN was left on). Why starting the Cisco VPN would freak out the router?
View 3 Replies View RelatedD-Link DIR-655 :: Detect / Stop DDOS Attacks With It?
Mar 22, 2013i can detect the IP of DDOS attacks and if there's a simple way to prevent it. I've heard different suggestions from blocking incoming ping requests to blocking specific IP ranges
running 2.03 firmware
D-Link DIR-655 :: Internet Connection To All Computers Would Just Stop
Jul 22, 2011I have the DIR-655 Hardware version B1, Firmware version 2.00NA and everything has been working fine for about 3 months. Lately the internet connection to all the computers would just stop. All the computers are connected to the router and the router is connected to the cable modem and their is no indication of a problem. The lights are all on and the router status shows the cable status as connected and the network status as established. I can't open any webpages, or all the ping would time out. It happens on all device, Windows Vista/7 PC, Mac computer, Linux laptop, and iPhone/ iPad. The problem gets fixed when I reset the router or just wait about 5-10 minutes and the problem goes away. That normally isn't a problem, but it's starting to happen twice a day now and it is really really annoying when I'm playing games. I tried the FAQ and searching the forums, but in vain.
View 7 Replies View RelatedCisco WAN :: 7206 Stop ARP Requests On CE To PE Link
May 14, 2012We have a router (7206) which connected to client device in /30 IP segment, but this device is a switch which connected to many more devices. Doing packet capture on our router interface unravel many ARP requests which comes from the client switch.Is there any feature or command which we can stop this?
View 3 Replies View RelatedD-Link DIR-655 :: How To Stop From Dropping Back To Using A Single Channel
Jul 14, 2012I live in a Townhome complex so inSSIDer displays a lot of wireless activity. I have noticed that many of the routers channels are listed as 6 + 2, 4 + 1, etc., while show only a single channel. I have been able to "temporarily" replicate this by setting the Channel Width on my DIR-655, by setting channel width to auto, and when I am successful it displays a speed of 300, both in my task bar and in inSSIDer. However, that is usually short lived and the channel for my router reverts back to a single channel and the displayed speed drops to 130 or 144. My neighbor's Netgear is rock solid at displaying dual channels. Well, that and besting my signal strength. :-)
I have the router manually to channel 8 because none of the routers, judged by their displayed strength, use it.So, I guess my question is; how do I stop my DIR-655 from dropping back to using a single channel, which I interpret 20MHz, even though it is set on auto?
D-link Dir-655 :: Wifi Signal Will Stop Broadcasting Other Computers
Dec 25, 2010I recently purchased a dir 655 router and it works fine but in after a while of using it, the wifi signal will stop broadcasting my other computers still work with the internet that are hard wired but the ones im using through the wifi signal will loose connection. So my fix has been unplugging the router and plugging it back in then it will broadcast my wifi again. I tryed leaving it plugged in and refreshing and rebooting my computers but that wont fix it until i disconnect the router and plug it back.
View 14 Replies View RelatedConnecting To Device On Different IP Range
Nov 7, 2011I am currently working on a job that has roadside equipment sending in data to an office-based instation server via a private APN. This is currently working fine and data is being received. However, for maintenance reasons its is necessary to connect from the instation server back out to the roadside equipment's web GUI. Currently this isn't working! I think this is because they are on different IP ranges. [code] I've tried messing about with adding routes and changing the mask address but so far have had no luck.
View 4 Replies View RelatedD-Link DCS Network Camera :: 2121 Motion Trigger Won't Stop
Feb 25, 2013I have 3 cameras. all had the problem that after a while motion detection would be triggered continuously for no reason at all. With 2 of them I managed to fix it with a firware update, but no luck with the 3rd one. I even tried several different firmware versions.) it starts to record continuously after abt 24-48 hrs & i have to reboot to get it to stop.
View 1 Replies View RelatedD-Link DIR-655 :: Stop Apps Like Internet Download Manager From Choking Bandwidth?
Jul 22, 2012My younger brother uses IDM to download files and it slows my Internet down to a crawl. I've tried reasoning with him but its not getting through to him. Is there any way I can use my router (bcz only I have access to it) to limit IDM?
View 5 Replies View RelatedD-Link DIR-615 :: Internet Activity Light Blinking Non-stop With New Comcast Connection?
Jan 21, 2011I recently switched from a DSL ISP (Earthlink, Zyxel modem configured as a bridge, pppoE connect) to a cable ISP (Comcast, Arris cable modem, dhcp connect). Basically PC --> DIR615-->Cable modem-->Internets. With the old DSL the Internet activity LED (green, looks triangular) on the DIR615 blinked only when internet activity occurred. With the new Comcast connection it blinks non-stop about 5 times a second! Even if the PC is turned off it blinks. It stops blinking if I disconnect the ethernet cable between router and modem. The connection itself is fine, but if the DIR615 is doing something it should not be doing it might slow the connection down a bit, (or burn something out prematurely?)FYI, the Arris cable modem does not seem to be a router. It takes a cable connection from outside and provides a single ethernet cable and 2 (voice) telephone cables to the house.
View 1 Replies View RelatedConnecting A Sprint Overdrive Device To A Server?
Mar 30, 2011I am currently a student in a computer repair class and have recieved an assignment for troubleshooting a network through a Sprint overdrive device. The current setup in the room (which worked with a previous device but not the same model) is the internet going into the server VIA ethernet port and sent back out through the server into a switch. From there it connects to another switch that connects roughly 10 computers. The overdrive device is a WiFi hotspot device and the director of the network wants me to make the network with the ability of connecting to the internet through the Device. We have placed a Wireless USB device on the server to recieve the signal from the Overdrive device. The server can connect to the internet. When we try to send the signal out from the server we get a IP conflict. I have tried switching the IP's and still do not get it to work.
View 3 Replies View RelatedConnecting Infrastructure Mode Wifi To Ad-hoc Device
Dec 3, 2011I have a Kindle Fire whose wifi is infrastructure mode and my HTC Hero smart phone which is ad-hoc. Can I use a router or bridge to allow these 2 to talk to each other ?
View 12 Replies View RelatedD-Link DIR-655 :: Cannot See Wireless Device From Windows 7 Explorer
Aug 25, 2011My Samsung phone is working as it should as an USB device (using KEIS and such). However though it receives ip address from DIR-655 router and is registered by MAC address in router - also possible to ping its IP from windows I cannot see it in /Network from my WIN7 64bit OS? The desktop comp is wired to the router, phone is on wireless.
I ve tried several settings and almost had it. It did work some months ago...
From log; "SSID": Wireless system with MAC address XXXXXX secured and linked" (That is my mobile phone)
TP-Link 300Mbps Wireless :: TL-WR1043ND How To Get Device Pin
Dec 26, 2012Region : Austria
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
unfortunately I've lost my device pin and I've reset my device.can I get the device pin on a other way? on my invoice there is no information about that.
D-Link DIR-825 :: What Device To Be Used To Extend Wireless Network
Aug 10, 2010set up the wireless network at a friend's house, which is a large solid-brick house that winds from one end to the other. The current location of where the cable comes into the house is unfortunately on the far-left end of the house, which means that the right end of the house receives no signal from their DIR-825 wireless N router.
What I've been looking into is the best way to wirelessly extend the wireless signal to the other end of the house. It seems straightforward enough to use an ethernet cable and access point to extend a wireless network, but that is not really a good option for this house. After reading many forum posts (and not being an expert myself) it seems like it may be possible to wirelessly extend the wireless network with another router, although it appeared that this is much less common (if at all possible) with wireless N routers.
what device I need to accomplish what I've described above? Another router, or some kind of access point/bridge? I saw at least one rather expensive wireless N repeater online (a Hawking brand, I believe) but was hoping to avoid that option initially, but if that is the only way to go then so be it :-)
D-Link DIR-655 :: Wireless Device Won't Connect To SMTP Server
Jun 8, 2011I can send email though my yahoo account (which is hard wired to my router) and I can access the internet through my wireless device (iPhone 3GS) but I can not send email through my wirless device. I keep getting a message stating it can't reach the smtp server.
View 1 Replies View RelatedTP-Link 300Mbps Wireless :: TL-WR1043ND - Cannot Connect To Any Device Wirelessly
Jan 6, 2013Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmwar Version :
ISP : AT&T
I recently got a new modem from AT&T. I hooked it up and everything worked fine for a few days. Last night some friends came over with their wireless devices (iphone, ipad) and after a while, the internet got really slow. Then it was unresponsive but it said that we were still connected to the network. So I decided to restart the router. Once it was finished rebooting, we were not even able to connect to the network at all. Even on my computer downstairs I was not able to connect wirelessly. I am connected via ethernet from the router right now on my computer upstairs and that is working fine. I have tried rebooting the router to factory settings, unplugging the modem, rebooting the modem, unplugging the modem, changing the router settings, pretty much every practical solution for simple connectivity issues.
Linksys Access Point :: Wet610n - Connecting Device To Certain Wifi Networks
Mar 4, 2013I am having trouble connecting my device to certain WiFi networks. We work with hotels and we have a handful of devices that are just not able to connect to their network. Te device works fine in my office. When I get to the Setup page and do a site survey, it'll get to 100% and then display a "page can't be found" as oppose to showing me that it has been connected. We had the MAC address cleared in their network and still no luck. Firmware has also been updated.
View 7 Replies View RelatedD-Link DIR-655 :: Port Link Light For Powered-off Device Stayed On
Nov 20, 2011 I have a DIR-655 Rev B, in a typical cascaded config: modem > dir-555 > switches & devices, etc.One of the four dir-655 ports is connected to a cheap-o Belink Wifi router which I use as an access point (I only use this because there's one device that only supports WEP). I was debugging a WiFi issue and I pulled the plug on this Belkin just to get it out of the picture. Well, when I did that, EVERYTHING that was connected through the DIR-655 lost connection. (Well, all the wired stuff anyway- not sure about WiFi devices through the DIR-655). I noticed that the port link light for the powered-off device stayed on on the DIR-655. When I unplugged the cable from the DIR-655, everything went back to normal.
So what I'm trying to figure out now is, is this a DIR-655 issue, or is it something screwy with the Belkin? Or Both? I've got to assume that there's some inherent flaw in the DIR-655 that allows something connected to a port to screw up everything that it's hosting.