D-Link DIR-655 :: Wireless Device Won't Connect To SMTP Server

Jun 8, 2011

I can send email though my yahoo account (which is hard wired to my router) and I can access the internet through my wireless device (iPhone 3GS) but I can not send email through my wirless device.  I keep getting a message stating it can't reach the smtp server.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: E1500 Won't Allow To Connect To An SMTP Server?

Mar 23, 2013

I have an E1500 N300 Router, I've had it for 3 or 4 weeks now. Ever since I've had it, I can no longer send e-mails out with Eudora nor Outlook.  I've tried using about 3 different SMTP's just to verify that it wasn't a server issue. I tried Port Forwarding in the router settings. I selected SMTP and POP3 and checked Enable on both, then save changes. But they don't appear to be taking, as when I go back in and try to set them again, it let's me and doesn't give me a Port Overlap warning. I've been told that I shouldn't need to mess with Port Forwarding at all, I just need to go into the Firewall settings and open up the SMTP, POP3, and IMAP ports. However, I don't see any settings in my Router settings to allow this, aside from Port Forwarding and it's not actually saving the changes. I will admit, I'm not all that great with this stuff, and this is the first time I've had any issues with a Router stopping me from E-mailing.

View 9 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Cannot Connect To Any Device Wirelessly

Jan 6, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmwar Version :
ISP : AT&T

I recently got a new modem from AT&T. I hooked it up and everything worked fine for a few days. Last night some friends came over with their wireless devices (iphone, ipad) and after a while, the internet got really slow. Then it was unresponsive but it said that we were still connected to the network. So I decided to restart the router. Once it was finished rebooting, we were not even able to connect to the network at all. Even on my computer downstairs I was not able to connect wirelessly. I am connected via ethernet from the router right now on my computer upstairs and that is working fine. I have tried rebooting the router to factory settings, unplugging the modem, rebooting the modem, unplugging the modem, changing the router settings, pretty much every practical solution for simple connectivity issues.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: WR941ND Connect Device Which Only Has LAN Port To Network

Feb 20, 2013

Region : Singapore
Model : TL-WR941ND
Hardware Version : V3

I would like to connect a device (dataloger that sends data to a remote server via internet) which only has LAN port to a wireless network on the location. I managed to do this once with WA901ND configured in Client mode (WA901ND acts like a wireless card for this data loger).Does WR941ND support this feature (which feature should I use?) or should I buy WA901ND again?

View 7 Replies View Related

Cisco :: LMS 4.0 How To Add Devices In DCR And Set SMTP Server

Jan 20, 2012

I just installed LMS 4.0 on OS Window 2008 R2. Right now, I know how to add devices in DCR and set SMTP server. My question is

1. I want LMS to send an alert email when Coreswitch is down how to do that ?
2. I want LMS to send an alert email when interface is down (not all interface but specify one) how to do that ?
3. I want to created a custom portlet that monitor only one device and specify interface on it how to do that ?

View 1 Replies View Related

Cisco :: LMS 3.2.1 Changing Smtp Server

Nov 13, 2011

Running lms 3.2.1   CS 3.3.1  on Windows 2003
 
I need to point the LMS server to a new mail relay, but when I make the change in
 
CS->SERVER->Admin->System Preferences  smtp server
 
It claims to have made the change successfully but the old IP address remains.

View 3 Replies View Related

Cisco :: LMS 3.2.1 Can't Change Smtp Server IP

Aug 23, 2012

I'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;

View 1 Replies View Related

Cisco :: Configure NAT For Internal SMTP Server In ASA 5520

Sep 21, 2012

I need to configure my ASA 5520 version 7.3 firewall to translate our SMTP server residing in local LAN to use different IP address from the outside interface which is used by all other computers to access Internet. Under NAT section, I have NATted this internal SMTP server with different IP address(eg x.x.x.1) and also translated the remaining IP addresses in the LAN to the outside interface(eg x.x.x.2)

my problem is, Whenever i check the header for message coming from the smtp server it shows that, the SMTP server is also translated by using the same outside interface public ip address(i.e x.x.x.2) which is used by other client machine to access internet instead of the x.x.x.1. How I can get my SMTP server to use separate IP and avoid to be blacklisted by some domain.

View 4 Replies View Related

Cisco :: Configure NAT For Inside SMTP Server In ASA 5520

Sep 20, 2012

I need to configure my ASA 5520 version 7.3 firewall to translate our SMTP server residing in local LAN to use different IP address from the outside interface which is used by all other computers to access Internet.

Under NAT section, i have NATted this internal SMTP server with different IP address(eg x.x.x.1) and also translated the remaining IP addresses in the LAN to the outside interface(eg x.x.x.2)

my problem is, Whenever i check the header for message coming from the smtp server it shows that, the SMTP server is also translated by using the same outside interface public ip address(i.e x.x.x.2) which is used by other client machine to access internet instead of the x.x.x.1.

how i can get my SMTP server to use separate IP and avoid to be blacklisted by some domain.

View 3 Replies View Related

Cisco WAN :: Inbound SMTP To Our Exchange Server Through 1841 Rejected

Jan 10, 2011

I am deploying a Cisco 1841 in place of our basic DSL router.I have an ADSL WIC and FA0/0 connected to our LAN.LAN IP ADDRESS range is 192.168.1. 0/ 24 I have dynamic and static NAT configured.  At this point although I have ACL's configured I have NOT implemented them as yet for the following reason.  I am unable to recieve inbound SMTP traffic - now  know my MX records are correct as this all owrks happily on our basic DSL router.  I can send external emails no problem and all internal email works fine. [code] I am in the process of defaulting the router and programming the barbones to get the link working and see if inbound SMTP works then start building the blocks again.

View 4 Replies View Related

Cisco Firewall :: ASA5505 (8.4.2) How To Access Inside SBS-Server On SMTP / RDP

Oct 25, 2011

Using an ASA5505, have 1 static outside address, want to access an inside SBS-Server on SMTP, RDP (3389), HTTPS and port 987
 
Have configured network object nat rules using the asdm, SMTP works (I can telnet to the server on port 25 from outside), however for some reason I can not telnet inside and out on port 25, so outgoing mail does not work. RDP does not seem to work from outside, 987 I havent tested from outside. When I try to create a network object nat rule for https I get this message from the ASA:
 
[OK] object network SBS-HTTPS
 object network SBS-HTTPS
[ERROR] nat (inside,outside) static interface service tcp https https
 NAT unable to reserve ports.

View 5 Replies View Related

Cisco WAN :: ASA 5510 - Mail Server Error 421 SMTP Connection Went Away

Oct 11, 2011

I've got some problem with my Mail Server since I've migrated to an ASA5510.Actually the server is in a DMZ with a private Ip ( 10.x.x.2) and it is translated to a Public IP ( 194.x.x.65).I use these configuration :

static (DMZ,LAN) 194.x.x.65 10.x.x.2 netmask 255.255.255.255 static (DMZ,LAN) 194.x.x.66 10.x.x.3 netmask 255.255.255.255 static (DMZ,WAN) 194.x.x.65 10.x.x.2 netmask 255.255.255.255 static (DMZ,WAN) 194.x.x.66 10.x.x.3 netmask 255.255.255.255 static (LAN,DMZ) 192.168.0.0 192.168.0.0 netmask 255.255.248.0
 
Some Users received in there mailbox a system administer error message :

Object : Impossible to deliver : test Your message could not be deliver to one or more of its recipients: 421 SMTP connection went away!
 
When they try to re sent it some times later, message is sent without problem.

View 4 Replies View Related

Cisco Firewall :: 5510 Single Outside Public / Can PAT Out And NAT SMTP Server Back

Jul 30, 2012

I have an ASA 5510, one public IP address on my outside interface, an internal email server and a private network.I would like...

1: Users on my private network to be able to access the internet (PAT them to external outside address)
2: Email to be delivered to my MX (my single public IP address translated back to my internal email server.
 
i.e. can I share my single public IP address to serve translation in both directions (private users surfing the Internet (in-to-out) and an outside to inside NAT for email) ?
 
Email (MX) = 1.2.3.4
Public (outside) address = 1.2.3.4
Email server internal = 10.1.2.3
Internal private subnet for users = 10.0.0.0/8

View 1 Replies View Related

D-Link DIR-655 :: Cannot Connect XBox 360 To Network PC's And Storage Device

Jan 29, 2011

I just upgraded my wireless router to a D-Link DIR-655.  I have 2 PCs and a network storage device (D-Link DNS 321) connected via ethernet to the router.  I also have an xBox 360 connected wirelessly to the router.  The xBox is able to connect to the internet via the router, but it cannot connect to (see) the PC's or the network storage device.  It was able to do so with my old wireless router (a Belkin), but it stopped with the DIR-655.

View 4 Replies View Related

D-Link DIR-655 :: How To Connect LinkSys Wps54gug A Remote Wireless G Print Server

Apr 12, 2011

My DIR-655 is setup and working fine with WPA personal encryption to different laptops in my home network. Question: Can I connect a wireless print server (LinkSys WPS54GU2) that only supports 'G' wireless encryption? Can the DIR-655 support a mixed N and G network?Do I have to reconfigure my DIR-655 to the slower WEP encryption and create an entirely 'G' network to include one G network device?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Unable To Connect Printer Server

Mar 22, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : telecentro

I recently purchased a tl-wr842nd, my printer is a hp laserjet 1020 and it is in the compatible list as I seen. The problem is that I connect the printer in the usb routers port and the led do not light up, I tried putting my pendrive to see if the usb routers port wasn't working but it does since the pendrive is accepted and online and the usb led lights.I downloaded and installed the latest firmware but there's no change, I did everything like it saids in the faq 415 where it explains how to install and use printer server with no luck.

View 1 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR740N Failure To Connect To Internet / Server

Apr 24, 2013

Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version :
Firmware Version :
ISP :

I've configured the router using the Easy Setup Assistant CD provided and have a wifi connection between the router provided however when using network diagnostics, while the wifi connection is fine, I am getting "failed to connect to Internet" and "failed to connect to server" messages. I have tried adjusting settings manually but without any progress.

View 8 Replies View Related

Cisco Firewall :: ASA5510 / IPS SSM Could Not Connect To SMTP Host

Sep 3, 2011

We have an ASA5510 with the IPS ASA-SSM-10 module installed. All is working well except event notification. When sending a test email from the SSM IPS, we get the error "could not connect to SMTP host". The Exchange SMTP host does allow traffic from the IPS and ASA. I can ping to the SMTP host by IP and name. What am I missing here?

View 3 Replies View Related

D-Link DIR-655 :: Unable To Connect To Game Server

May 13, 2011

i cant connect to most of my friends through xbox and computer, i also cant connect to some games servers. it also says that i have a nat strict. i don't care if my router has no security. i just want my internet to be fast and i can connect to people.

View 1 Replies View Related

D-Link DIR-655 :: Connect Outlook Client Through Server?

Feb 18, 2013

I've replaced my old wireless router with a new DIV-655.  Now, I can connect to my work's VPN and connect to servers and data via the VPN, but my Outlook client will NOT connect to the Exchange server.It (Outlook) just sits there saying "Trying to connect to Microsoft Exchange.Will it work.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Media Server Becomes Unavailable Most Of Time / Renders Device Useless

Feb 6, 2011

I have the new E4200 with an attached 750GB hard disk.All works well, however the media server becomes unavailable most of the time and renders the device useless.
 
I can connect to the Media Server from my xbox and laptop for an hour or so, and then all of a sudden it is gone. The only option I have is to reboot the router to bring it back online however not all of the music and videos are shown on the media server (yet).I uploaded quite a bit of music and video to the hard disk, I can initiate a scan but after a while the media server becomes unavailable / cannot connect to it.

View 9 Replies View Related

D-Link DIR-825 :: Unable To Connect Through External IP Back Into Server On Applications?

Aug 7, 2011

Just updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.

For instance, I have a dyndns address of ericnewton76.dyndns.org.  This points to my router.  Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http://  , you'll see an IIS7 welcome screen)

However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at ericnewton76.dyndns.org/svn but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)

So now I wish I could back-peddle to 1.0 firmware.

View 6 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3420 / Fail To Connect Mail Server

Mar 10, 2013

Region : Denmark
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n

I have a TL-MR3420 router placed in a remote location. The internet connection is via 3G, and since the telco is shifting the IP every 24 hours, the router is configured with DDNS from no-ip.org. This is working OK most days, but sometimes the DNS fails to update. To be able to trobleshoot it, I am trying to make my router send a mail with the logfile every hour. This function seems to be easy and out-of-the-box, but it doesn't wiork. Whenever I try to mail the log I get the error message "Fail to Connect the mail server.".

It is not possible to enter another SMTP-port, so I asume the standard port 25 (like this thread). Most ISP-mail services require SSL/TLS and/or use an alternative port, so I have made my own server. This server is visible on the Internet, and I (and others) are able to connect and send mails using smtp on port 25. But, still my remote TL-MR3420 keep saying "Fail to Connect the mail server.". I have tried nearly everything, including disabling authentication and giving the IP-address of the smtp server directly instead of the URL.

View 1 Replies View Related

D-Link DIR-615 :: Laptop Setup To Connect To Exchange Server For Email

Apr 12, 2009

I'm hosting my email on an Exchange Server 2003 box and have my laptop (Vista Ultimate 32 bit) setup to connect to the exchange server for my email. This works fine through a LinkSys RV042 in one location and a LinkSys WRT54GC in another, but fails through the DIR-615 B2 (2.24 firmware) at home. I'm guessing it's blocking something needed for the MAPI connection.

View 2 Replies View Related

D-Link DIR-655 :: Cannot See Wireless Device From Windows 7 Explorer

Aug 25, 2011

My Samsung phone is working as it should as an USB device (using KEIS and such). However though it receives ip address from DIR-655 router and is registered by MAC address in router - also possible to ping its IP from windows I cannot see it in /Network from my WIN7 64bit OS? The desktop comp is wired to the router, phone is on wireless.

I ve tried several settings and almost had it. It did work some months ago...

From log; "SSID": Wireless system with MAC address XXXXXX  secured and linked" (That is my mobile phone)

View 14 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND How To Get Device Pin

Dec 26, 2012

Region : Austria
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :

unfortunately I've lost my device pin and I've reset my device.can I get the device pin on a other way? on my invoice there is no information about that.

View 1 Replies View Related

D-Link DIR-655 :: Stop Wireless Device From Connecting To It?

Feb 21, 2013

How do i stop a Wireless device from connecting to the router? i attempted to find an answer myself and failed

View 1 Replies View Related

D-Link DIR-825 :: What Device To Be Used To Extend Wireless Network

Aug 10, 2010

set up the wireless network at a friend's house, which is a large solid-brick house that winds from one end to the other.  The current location of where the cable comes into the house is unfortunately on the far-left end of the house, which means that the right end of the house receives no signal from their DIR-825 wireless N router.

What I've been looking into is the best way to wirelessly extend the wireless signal to the other end of the house.  It seems straightforward enough to use an ethernet cable and access point to extend a wireless network, but that is not really a good option for this house.  After reading many forum posts (and not being an expert myself) it seems like it may be possible to wirelessly extend the wireless network with another router, although it appeared that this is much less common (if at all possible) with wireless N routers.

what device I need to accomplish what I've described above?  Another router, or some kind of access point/bridge?  I saw at least one rather expensive wireless N repeater online (a Hawking brand, I believe) but was hoping to avoid that option initially, but if that is the only way to go then so be it :-) 

View 12 Replies View Related

Connect To Wireless On One Device?

Apr 8, 2011

My PS3,my ipod touch, and my dads ipod touch is on my wireless. and every once in a while my internet stops working on both my ipod and my ps3 after anything gets unplugged on the router but for some reason, the wireless internet still works on my dads ipod touch. everything is connected with static settings I do not know how to fix this, my dad says that it has something to do with a setting that keeps getting reset, he has fixed it before by doing something in cygwin or command prompt I think its called.Anyway, I've tried pinging my ip address on my ipod but I get no response.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Virtual Server Link Missing Under Nat Menu

Mar 3, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange

I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.

View 1 Replies View Related

Wireless Device Also Won't Connect To Facebook

Jun 29, 2011

TP Link router, wired to a tower. websites such as YouTube Facebook wont load, neither will full tilt poker software yet Google Hotmail all load fine. This is using the newest IE 8 is it now?

-ipconfig /renew done
-winsock done
-clean boot done
-reset router done

wireless device also wont connect to FB or YT, iphone also connected wirelessly wont - although trying to connect when not on wireless using a non 3g connection fails also.. no signal where I live.Ran spybot, mbam, avast and superanti all at same time (cos my PC rocks unlike my connection) 0 issues found on each.

View 2 Replies View Related

D-Link DIR-655 :: Port Link Light For Powered-off Device Stayed On

Nov 20, 2011

I have a DIR-655 Rev B, in a typical cascaded config:  modem > dir-555 > switches & devices, etc.One of the four dir-655 ports is connected to a cheap-o Belink Wifi router which I use as an access point (I only use this because there's one device that only supports WEP).  I was debugging a WiFi issue and I pulled the plug on this Belkin just to get it out of the picture.  Well, when I did that, EVERYTHING that was connected through the DIR-655 lost connection.  (Well, all the wired stuff anyway- not sure about WiFi devices through the DIR-655).  I noticed that the port link light for the powered-off device stayed on on the DIR-655.  When I unplugged the cable from the DIR-655, everything went back to normal.

So what I'm trying to figure out now is, is this a DIR-655 issue, or is it something screwy with the Belkin?  Or Both?  I've got to assume that there's some inherent flaw in the DIR-655 that allows something connected to a port to screw up everything that it's hosting.

View 7 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND USB HDD Spin Down Capability Does Exist On Device

Dec 8, 2012

-Model : TL-WR1043ND
-Hardware Version : v1
-Firmware Version : 120605

I'm wondering if USB HDD spin down capability does exist on the deviceI think this enhancement will be serve a lot of costumers who wish to use all USB features.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved