Running lms 3.2.1 CS 3.3.1 on Windows 2003
I need to point the LMS server to a new mail relay, but when I make the change in
CS->SERVER->Admin->System Preferences smtp server
It claims to have made the change successfully but the old IP address remains.
I just installed LMS 4.0 on OS Window 2008 R2. Right now, I know how to add devices in DCR and set SMTP server. My question is
1. I want LMS to send an alert email when Coreswitch is down how to do that ?
2. I want LMS to send an alert email when interface is down (not all interface but specify one) how to do that ?
3. I want to created a custom portlet that monitor only one device and specify interface on it how to do that ?
I'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;
View 1 Replies View RelatedI need to configure my ASA 5520 version 7.3 firewall to translate our SMTP server residing in local LAN to use different IP address from the outside interface which is used by all other computers to access Internet. Under NAT section, I have NATted this internal SMTP server with different IP address(eg x.x.x.1) and also translated the remaining IP addresses in the LAN to the outside interface(eg x.x.x.2)
my problem is, Whenever i check the header for message coming from the smtp server it shows that, the SMTP server is also translated by using the same outside interface public ip address(i.e x.x.x.2) which is used by other client machine to access internet instead of the x.x.x.1. How I can get my SMTP server to use separate IP and avoid to be blacklisted by some domain.
I need to configure my ASA 5520 version 7.3 firewall to translate our SMTP server residing in local LAN to use different IP address from the outside interface which is used by all other computers to access Internet.
Under NAT section, i have NATted this internal SMTP server with different IP address(eg x.x.x.1) and also translated the remaining IP addresses in the LAN to the outside interface(eg x.x.x.2)
my problem is, Whenever i check the header for message coming from the smtp server it shows that, the SMTP server is also translated by using the same outside interface public ip address(i.e x.x.x.2) which is used by other client machine to access internet instead of the x.x.x.1.
how i can get my SMTP server to use separate IP and avoid to be blacklisted by some domain.
I am deploying a Cisco 1841 in place of our basic DSL router.I have an ADSL WIC and FA0/0 connected to our LAN.LAN IP ADDRESS range is 192.168.1. 0/ 24 I have dynamic and static NAT configured. At this point although I have ACL's configured I have NOT implemented them as yet for the following reason. I am unable to recieve inbound SMTP traffic - now know my MX records are correct as this all owrks happily on our basic DSL router. I can send external emails no problem and all internal email works fine. [code] I am in the process of defaulting the router and programming the barbones to get the link working and see if inbound SMTP works then start building the blocks again.
View 4 Replies View RelatedUsing an ASA5505, have 1 static outside address, want to access an inside SBS-Server on SMTP, RDP (3389), HTTPS and port 987
Have configured network object nat rules using the asdm, SMTP works (I can telnet to the server on port 25 from outside), however for some reason I can not telnet inside and out on port 25, so outgoing mail does not work. RDP does not seem to work from outside, 987 I havent tested from outside. When I try to create a network object nat rule for https I get this message from the ASA:
[OK] object network SBS-HTTPS
object network SBS-HTTPS
[ERROR] nat (inside,outside) static interface service tcp https https
NAT unable to reserve ports.
I've got some problem with my Mail Server since I've migrated to an ASA5510.Actually the server is in a DMZ with a private Ip ( 10.x.x.2) and it is translated to a Public IP ( 194.x.x.65).I use these configuration :
static (DMZ,LAN) 194.x.x.65 10.x.x.2 netmask 255.255.255.255 static (DMZ,LAN) 194.x.x.66 10.x.x.3 netmask 255.255.255.255 static (DMZ,WAN) 194.x.x.65 10.x.x.2 netmask 255.255.255.255 static (DMZ,WAN) 194.x.x.66 10.x.x.3 netmask 255.255.255.255 static (LAN,DMZ) 192.168.0.0 192.168.0.0 netmask 255.255.248.0
Some Users received in there mailbox a system administer error message :
Object : Impossible to deliver : test Your message could not be deliver to one or more of its recipients: 421 SMTP connection went away!
When they try to re sent it some times later, message is sent without problem.
I can send email though my yahoo account (which is hard wired to my router) and I can access the internet through my wireless device (iPhone 3GS) but I can not send email through my wirless device. I keep getting a message stating it can't reach the smtp server.
View 1 Replies View RelatedI have an ASA 5510, one public IP address on my outside interface, an internal email server and a private network.I would like...
1: Users on my private network to be able to access the internet (PAT them to external outside address)
2: Email to be delivered to my MX (my single public IP address translated back to my internal email server.
i.e. can I share my single public IP address to serve translation in both directions (private users surfing the Internet (in-to-out) and an outside to inside NAT for email) ?
Email (MX) = 1.2.3.4
Public (outside) address = 1.2.3.4
Email server internal = 10.1.2.3
Internal private subnet for users = 10.0.0.0/8
I have an E1500 N300 Router, I've had it for 3 or 4 weeks now. Ever since I've had it, I can no longer send e-mails out with Eudora nor Outlook. I've tried using about 3 different SMTP's just to verify that it wasn't a server issue. I tried Port Forwarding in the router settings. I selected SMTP and POP3 and checked Enable on both, then save changes. But they don't appear to be taking, as when I go back in and try to set them again, it let's me and doesn't give me a Port Overlap warning. I've been told that I shouldn't need to mess with Port Forwarding at all, I just need to go into the Firewall settings and open up the SMTP, POP3, and IMAP ports. However, I don't see any settings in my Router settings to allow this, aside from Port Forwarding and it's not actually saving the changes. I will admit, I'm not all that great with this stuff, and this is the first time I've had any issues with a Router stopping me from E-mailing.
View 9 Replies View RelatedI know know nothing about cisco devices. Just wanted to get that out there. I recently came to a job that has a 5505 setup as the network gateway, and as a vpn for employees to work from home via the Cisco VPN remote client program. We had one main server that was domain controller, dns, and dhcp. It was a old 03 box, and I setup a new 08 r2 box on a different IP, and migrated all the above functions to it. Old server was a xxx.xxx.xxx.31, new server xxx.xxx.xxx.6. I found the java ASDM program(6.1) and connected to the ASA, and I have changed .31 to .6 in as many places as I can find, however, vpn clients on the outside can no longer connect to their desktops, as when i open a command prompt on their computer, the only IP they can ping is xxx.xxx.xxx.31, pinging xxx.xxx.xxx.6, or any other address fails. I'm guessing maybe it's in the firewall of the asa, but have no ideal really. Was there anything else I was suppose to do? Someplace I overlooked?
View 7 Replies View RelatedI am trying to change the DNS server that my VPN gives to VPN clients on a Cisco PIX 515E. What command will change it from 10.6.0.2 to 10.6.0.4? The software version is 7.2(3)
View 3 Replies View RelatedWe are retiring our current radius server. It is windows 2003 IAS server (also a DC) that we use for 802.1X authentication. We are moving to server 2008r2. I have already installed NPS and Network Authentication services on the server.
On the existing IAS server I exported the settings (using iasmig reader.exe) and was able to import the profiles (I see the 5500 as a radius client etc) Our 5500 is still pointing to the old server.
Is it as simple as changing the ip of the RADIUS server to point to the new server? It looks like I actually have to add the new server and create a new pres hared key on the NPS server but only find documents on adding a new 5500 (vs flipping it to a new NPS server).
I added a new server and created a new static NAT assignment on the ASA 5510 to the server's IP. When I browse to the web to check what public IP it's reporting, it shows the wrong IP. I disabled the network interface on the server, ran "clear xslate", reenabled the network interface, ran "sho xlate" and while the correct translation was in the table, the server still reported the wrong IP address.I even ran a packet trace and it showed the IP address being correctly translated to the proper public IP, but when I browse to the web I get the same erroneous public IP. [code]
View 8 Replies View RelatedI am using Vista and have only one user accounts.Now I want to prevent changing the DNS server IP. I can prevent changing the DNS server IP or disable the LAN Properties.
View 4 Replies View RelatedCan I receive an answer to how can I remove the default smtp.cwjamaica.com from my Windows Outlook Account. This is a pop-up server that I wish to disconnect so I can use other facilities. This is the default server and it is no longer relevant to my location our current
View 1 Replies View RelatedMy Network is running Windows Server 2003 and with more than 150 Users. But last week, I notice that a program is changing my DHCP server IP Address scope.
View 2 Replies View RelatedWe have a 5508 controller authenticates with WPA2-enterprise to 3 possible AAA servers. Today I tried migrating our DHCP server from a Windows 2003 machine to Windows 2008 R2. Migration went smoothly and all wired clients could get IP's. Reservations intact, scopes intact, etc.. you name it. I though it was a great success.
Fast forward about an hour when people started coming into work for the day. Calls started coming in about their laptops not able to connect to the network. I double checked with a spare laptop in our IT department and also my iPhone. Same issue. Seems the only thing I changed today was the DHCP server (from 10.1.1.1 to 10.1.1.2).
After racking my head on it for awhile, I re-enabled the "old" dhcp server (10.1.1.1) and disabled it on the new (10.1.1.2). Instantly wireless clients were able to connect.
Am I missing some configuration step in the 5508 controller when moving DHCP servers? I do plan on running 2 DHCP servers (10.1.1.2 and 10.1.1.10) for redundancy once I get the primary one moved over and working correctly.
I want to decommision the older 2003 server. Its time to raise the domain functional level.
I'm using a router 877 at home and i really need to check out what this router do during the day. So some time ago i configured it using some eem actions and sending to me email, without any problems. Yesterday I changed my internet provider and now i need to use smtp autheticantion to send emails.
I read about how to authenticate, like username:password@host and also made a fast search here, without solve my problem. I need to put as username the email of the provider like: mouse@host.com:mypassword@smtpserveraddress.com. So, i want to know if someone had the same problem and solved it. Of course i couldn't use @ two times or eem would think that host.com is my smtp server! And right now is going in this way!
My IOS version is 15.1(2)T2, eem version is 3.1.
We have installed the Cisco Prime LMS 4.1 in our production environment. We have configured SMTP settings, but unable to find where we can configure username and password for SMTP authentication. It's only giving a option to enter email address without any authentication parameters.
View 2 Replies View RelatedThis is my first post in CSC. I have two issues with ASA 5505. I have configured ASA to use Easy vpn (ASA as RA server). Users are able to connect to vpn with out any issue and there is no diconnections with VPN. But when the users are trying to RDP to server it connects and disconnect as soon as login. some time it connect for 2 mins then it fades out for some time then it reconnects again. I guess I have give correct access-lists. Please find the Running configuration in the below.
2). we have a Email server in DMZ zone and it users are able to connect to the email server and they can see the emails. But when they try to send any emails it just stuck in the email server queue and does not deliver to the destination.
ASA Version 7.2(3)
!
!
interface Vlan1
nameif inside
security-level 100
ip address intinside 255.255.255.0
[code]....
Is it possibe to change SMTP port from 25 to any other in LMS..? Bcoz in scenario where we keep SMTP server to flow on some different port rather default port 25. So our LMS also should communicate in the new specified port to send DFM Alerts.
View 7 Replies View RelatedI'm trying to connect to an SMTP server using telnet via putty. Not just well known domains such as bigstring, aol, gmail, hotmail etc but also endless amount of not known or not popular ones.The problem is that although nmap says that port 25 is open, I can not establish any connection to ANY SMTP server (it just timeouts).I have tried disabling my firewall and using a proxy, but it still doesn't connect and now I've ran out of ideas. I also tried to disable my avast as well as legally used ip switcher program to make sure the problem is totally independent from my ISP.
View 7 Replies View RelatedI have installed some 3rd party software for email messaging and it requires SMTP details. I hardly even know what SMTP is. Via google I found one it has something to do with server for sending email messages but I don't want to use SMTP of my ISP which is (referring to smtp and not isp) the one that is being used in microsoft outlook program. But the 3rd party software is different one. It requires FIVE (5) datas and I have no idea how do I find them out:
email
server name
password
username
port
I have been searching for some smtp details what to type with the following requirements:
- smtp must be free to have and use details
- working one
- as fast as possible
- no particular limits
The program also offers to set up ''in-build'' smtp server. If I choose this it works but the message cannot be sent for unknown reason. I don't have firewall and I double checked nothing is wrong with avast antivirus. So I will have to get the smtp details with mentoined four requirements. Don't even know where to search. I found some freeware smtp (or virtual smtp) applications but I need 5 datas to type in and not an application. No idea where to get them. I tried gmal [URL] but its not working, been trying also different ports.
I have an ASA 5500 Firewall. I need to figure out how to log all events using Port 25 to determine if there are any rogue devices on our network. I was trying to figure out how to do this via the Real-Time Monitoring (filter) but have had no success.
View 1 Replies View RelatedWe have a cisco 800 series router between the internal network and the WAN. the problem is we are unable to receive some of our mail due to dropped packets by our router. the conversation between the two servers stops at the point were our server responds with the command 250 2.1.5 user@mydomain.com | 354 Start mail input; end with . i was able to trace the packet, using Packet Export, on the internal interface but not on the external interface. Also i have noticed that the external interface has about 160,000 unknown protocol drops while the internal interface has 0.
Is there anyway to find out way the external interface is dropping the packets.
I am trying to configure my ASA5505 to allow SMTP relay and the ACLStatic I created is not working.
View 1 Replies View RelatedMost examples of NAT translation using an ASA 8.4 are based on servers within a DMZ. In my case it's not because the mailserver also functions as an data and Active Directory server for my local domain. If tried to config the ASA for a while now and throw it in the corner for a couple of months out of frustration. Now I got some time left during christmas break I decided to start again.My purpose is to NAT SMTP / POP traffic from the internet, trough the ASA to my (inside) server. This is what I got so far. With this config I'm unable to telnet the inside server (192.168.1.10) from a remote location.
ASA Version 8.4(3)!hostname ciscoasaenable password cE8UUNd encryptedpasswd 2KFQ.2KYOU encryptednames!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.253 255.255.255.0!interface Vlan2nameif outsidesecurity-level 0ip address 95.*.*.218 255.255.255.248!ftp mode passiveobject network obj_anysubnet 0.0.0.0 0.0.0.0object network server1_smtphost 192.168.1.10object network server1_pop3host 192.168.1.10access-list outside_access_in extended
[code]....
I can ping 192.168.1.10 from the ASA CLI. I can Ping DNS 4.2.2.2 from the CLI (internet access). I can Telnet the server from the inside LAN, using: telnet 192.168.1.10 25.But I can't Telnet from an outside location using: Telnet 95.*.*.218 25 Because my server is on the Inside interface (diffenrent subnet) do I need an additional route?
I have a ASA 5510 (ver 8.4) and I have been all over the support sites looking for what I am doing wrong. I have a sanitized cut n paste of the OBJECT, NAT, ACCESS-LIST and Packet Tracer output and it keeps failing on the NAT with a rpf-check. Once i get the SMTP flowing I have to open up HTTP and HTTPS to one of the servers also.
Here it is:
RVGW# sh run object
object network WiFi
subnet 172.17.100.0 255.255.255.0
[Code]......
Below is the interesting part of my config. I have static NAT configured and working inbound for the Exchange Server and the Barracuda, however outbound traffic from those hosts comes out as the interface IP. Thoughts? I've tried a number of things (outside, inside), etc.
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network DSN-EXCH01
host 10.250.231.51
object network MAIL-IN
host 10.250.231.50(code)
I need to move the email traffic to a backup circuit. Below is my config. I have tried for email access but to no avail.
asa5505# sho run
: Saved
:
ASA Version 8.2(2)
!
hostname asa5505
[code]........
How can i change smtp to get on internet
View 3 Replies View Related