I have installed some 3rd party software for email messaging and it requires SMTP details. I hardly even know what SMTP is. Via google I found one it has something to do with server for sending email messages but I don't want to use SMTP of my ISP which is (referring to smtp and not isp) the one that is being used in microsoft outlook program. But the 3rd party software is different one. It requires FIVE (5) datas and I have no idea how do I find them out:
email
server name
password
username
port
I have been searching for some smtp details what to type with the following requirements:
- smtp must be free to have and use details
- working one
- as fast as possible
- no particular limits
The program also offers to set up ''in-build'' smtp server. If I choose this it works but the message cannot be sent for unknown reason. I don't have firewall and I double checked nothing is wrong with avast antivirus. So I will have to get the smtp details with mentoined four requirements. Don't even know where to search. I found some freeware smtp (or virtual smtp) applications but I need 5 datas to type in and not an application. No idea where to get them. I tried gmal [URL] but its not working, been trying also different ports.
I have a Belkin aigo True Mimo PreN Router model FD 582304. I am trying to wireless connect a new laptop on windows 7. It wont accept the WEP key I have previously used. The router is cable connected to my desk top computer. How do I find out the details of the WEP key for this router or reset all.
Iam joining sky in the coming week and will be receiving their free router (G Router). I am currently using (Belkin N Router) due to the distance from my computers and interferance (eg , walls, 4 floors).
I understand that I cannot use my own router with sky because they have username & password built into router. I have heard rumours that these details can be extracted.
I am looking for a way to hide all that information that can be retrieved about me, for example browser, OS, resolution, location, etc.. Is there a way to prevent the sites from getting that info?
Is it possible to obtain details for computers that are connecting to my wireless network? I can see their mac and ip addresses. I want to get details like computer name, operating system and other details if possible.
how do i telephone / email at & t or verizon to purchase wi-fi service ? i'll go back to their website (s) mess if i can't find a phone # or email address;telephone number ? do you know any for verizon or at&t or email address?
I know that when you surf the web, websites can log your IP & MAC address.If you get my jist, I don't want my laptop to be flagged on a few web sites I have been on.My plan is to use another pc, that has a wireless braodband dongle from a mobile phone company.The pc will be attched to the wireless router via eithernet, but banned from access the web via the router. This way I can connect remotley from my laptop.
Cant find the speeking result/cause of 4 and 1 in the example below, that are defined as enums in the MIBs normaly. Where can I access the result of "snmptranslate -M<MIB-dirs> -m ALL -Td <ps-status/test-oid>" if this is implemented in LMS overall? What are the OIDs from Cisco's ps-status/test, if the translation of MIB-enums is not implented?
Event_Description StateNotNormalDevice IP x.y.z.1Device Type Switches and HubsFault Last Updated At 06-Nov-2012 16:12:49Component
I know that when you surf the web, websites can log your IP & MAC address.If you get my jist, I don't want my laptop to be flagged on a few web sites I have been on.My plan is to use another pc, that has a wireless braodband dongle from a mobile phone company.The pc will be attched to the wireless router via Ethernet, but banned from access the web via the router. This way I can connect remotley from my laptop.
bought a second hand laptop but all previous owners details are still in. they must have been on a dial-up network want to change to broadband,how? also need to sort out wifi.
We are running a ASA5520 with system image of "disk0:/asa843-k8.bin". I'm also running ASDM ver: 6.4(7)So my question is while I'm in the ASDM on the configuration of the firewall, I'm looking at the Access Rules. When I do a show log on any of the rules that have hit counts on them, it opens up a Real-Time Log Viewer but I don't see any information. It's not showing anything, nothing appears, it just sit's there like it's waiting but no data is coming. Even though if I go back out to all the rules, I can see the hit count incrementing. The same thing happens no matter which rule I pick with hit counts on them.
one of my customer has CSACS & has bought CSACS-5-BASE-LIC, at the time of registration i ,had put the end customer as my company, how to change the end customer details on the license.
Had sent a mail to licenseing@cisco.com, they changed the end user details at there end, but the same is not reflecting on the physical box at the customer site.
Running the newest firmware available $ show version SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.0.0.4 ( date 08-Apr-2010 time 16:37:57 ) HW version V01
This is how I can cause the reboot to happen every time.
$ show lldp neighbors GE 10 Device ID: <mac address> Port ID: 22 Capabilities: Bridge
I am looking for for details meaning of license because I cannot found the details install. The license call
FLASR1-FW-RTU(=)
that is used to enable the firewall function in ASR 1000 series. But I don't clear about what feature inside, it is because it only show the "firewall" from website. Is that same as IOS firewall?
I've just received a Cisco 1801W router (pre-owned), which I'm going to be installing in our school, and I have been unable to figure out the details of the wireless configuration.The 1801W router is replacing an old basic Linksys WAP54G router. I'm hoping to configure the 1801 for basic DSL, with the WiFi configured with a single SSID, using WPA-PSK authentication with a hard-coded pre-shared key on the router. We do not have a radius server available at the school.
I think I have the router set up properly for DSL with NAT and DHCP for the internal network (192.168.1.x). The router's E0 interface uses 192.168.1.1, and the dialer0 interface will receive an IP from the service provider (ISP). The only thing I'm missing is the wireless configuration part.
Looking to set up a wireless printer (HP Deskjet 3050 All-in-One Printer - J610a) for use by another computer on the network; at present the printer is wirelessly connected to the router (Linksys e1000) and the software is installed on one computer (Win 7). The router recognizes a Network printer but no details about type.
The printer works correctly with the Win 7 machine but can't be found by the other machine (Win xp). Could it possibly be that I need to install the same software on the Win xp computer in order for it to be connected? Just guessing here as that was the case with another printer I networked but it was a Canon brand.
(5508 WLC, 1142N APs).I understand if I enable the AP mode to Rogue Detector from the details page of the AP, the AP stops accepting requests and is now looking for rogue items on the wired network. Is this the same when I enable Rogue Location Discovery Protocol? Will I lose the wireless functionality of all of my APs on the controller?
Next question, when I look at the Rogue Summary on the Monitoring page I see three Adhoc Rogue devices. When I select the Detail link only one shows. I remember the other two were HP mutifuction devices with WIFI enabled but I cannot retrieve that information anymore.
On one of our N7K, we have some packets dropped by the COPP policy in the class-default class-map. Partial results of "show policy-map interface control-plane" not so long after clearing the counters : [code]
what traffic is dropped by the policy ? Is there any logging possible ?
I'm trying to connect to an SMTP server using telnet via putty. Not just well known domains such as bigstring, aol, gmail, hotmail etc but also endless amount of not known or not popular ones.The problem is that although nmap says that port 25 is open, I can not establish any connection to ANY SMTP server (it just timeouts).I have tried disabling my firewall and using a proxy, but it still doesn't connect and now I've ran out of ideas. I also tried to disable my avast as well as legally used ip switcher program to make sure the problem is totally independent from my ISP.
I'm using a router 877 at home and i really need to check out what this router do during the day. So some time ago i configured it using some eem actions and sending to me email, without any problems. Yesterday I changed my internet provider and now i need to use smtp autheticantion to send emails.
I read about how to authenticate, like username:password@host and also made a fast search here, without solve my problem. I need to put as username the email of the provider like: mouse@host.com:mypassword@smtpserveraddress.com. So, i want to know if someone had the same problem and solved it. Of course i couldn't use @ two times or eem would think that host.com is my smtp server! And right now is going in this way!
We have installed the Cisco Prime LMS 4.1 in our production environment. We have configured SMTP settings, but unable to find where we can configure username and password for SMTP authentication. It's only giving a option to enter email address without any authentication parameters.
I just installed LMS 4.0 on OS Window 2008 R2. Right now, I know how to add devices in DCR and set SMTP server. My question is
1. I want LMS to send an alert email when Coreswitch is down how to do that ? 2. I want LMS to send an alert email when interface is down (not all interface but specify one) how to do that ? 3. I want to created a custom portlet that monitor only one device and specify interface on it how to do that ?
I'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;
This is my first post in CSC. I have two issues with ASA 5505. I have configured ASA to use Easy vpn (ASA as RA server). Users are able to connect to vpn with out any issue and there is no diconnections with VPN. But when the users are trying to RDP to server it connects and disconnect as soon as login. some time it connect for 2 mins then it fades out for some time then it reconnects again. I guess I have give correct access-lists. Please find the Running configuration in the below.
2). we have a Email server in DMZ zone and it users are able to connect to the email server and they can see the emails. But when they try to send any emails it just stuck in the email server queue and does not deliver to the destination.
ASA Version 7.2(3) ! ! interface Vlan1 nameif inside security-level 100 ip address intinside 255.255.255.0
Is it possibe to change SMTP port from 25 to any other in LMS..? Bcoz in scenario where we keep SMTP server to flow on some different port rather default port 25. So our LMS also should communicate in the new specified port to send DFM Alerts.