I'm using a router 877 at home and i really need to check out what this router do during the day. So some time ago i configured it using some eem actions and sending to me email, without any problems. Yesterday I changed my internet provider and now i need to use smtp autheticantion to send emails.
I read about how to authenticate, like username:password@host and also made a fast search here, without solve my problem. I need to put as username the email of the provider like: mouse@host.com:mypassword@smtpserveraddress.com. So, i want to know if someone had the same problem and solved it. Of course i couldn't use @ two times or eem would think that host.com is my smtp server! And right now is going in this way!
We have installed the Cisco Prime LMS 4.1 in our production environment. We have configured SMTP settings, but unable to find where we can configure username and password for SMTP authentication. It's only giving a option to enter email address without any authentication parameters.
I just installed LMS 4.0 on OS Window 2008 R2. Right now, I know how to add devices in DCR and set SMTP server. My question is
1. I want LMS to send an alert email when Coreswitch is down how to do that ? 2. I want LMS to send an alert email when interface is down (not all interface but specify one) how to do that ? 3. I want to created a custom portlet that monitor only one device and specify interface on it how to do that ?
I'm trying to change the IP address of the smtp server on cisco LMS 3.2.1;I have changed the IP on the GUi and when it didn't work, in the regdaemon. xml file, but it did not work too;When I capture packets from the LMS, it still sends emails to the old IP;
This is my first post in CSC. I have two issues with ASA 5505. I have configured ASA to use Easy vpn (ASA as RA server). Users are able to connect to vpn with out any issue and there is no diconnections with VPN. But when the users are trying to RDP to server it connects and disconnect as soon as login. some time it connect for 2 mins then it fades out for some time then it reconnects again. I guess I have give correct access-lists. Please find the Running configuration in the below.
2). we have a Email server in DMZ zone and it users are able to connect to the email server and they can see the emails. But when they try to send any emails it just stuck in the email server queue and does not deliver to the destination.
ASA Version 7.2(3) ! ! interface Vlan1 nameif inside security-level 100 ip address intinside 255.255.255.0
Is it possibe to change SMTP port from 25 to any other in LMS..? Bcoz in scenario where we keep SMTP server to flow on some different port rather default port 25. So our LMS also should communicate in the new specified port to send DFM Alerts.
I'm trying to connect to an SMTP server using telnet via putty. Not just well known domains such as bigstring, aol, gmail, hotmail etc but also endless amount of not known or not popular ones.The problem is that although nmap says that port 25 is open, I can not establish any connection to ANY SMTP server (it just timeouts).I have tried disabling my firewall and using a proxy, but it still doesn't connect and now I've ran out of ideas. I also tried to disable my avast as well as legally used ip switcher program to make sure the problem is totally independent from my ISP.
I have installed some 3rd party software for email messaging and it requires SMTP details. I hardly even know what SMTP is. Via google I found one it has something to do with server for sending email messages but I don't want to use SMTP of my ISP which is (referring to smtp and not isp) the one that is being used in microsoft outlook program. But the 3rd party software is different one. It requires FIVE (5) datas and I have no idea how do I find them out:
email server name password username port
I have been searching for some smtp details what to type with the following requirements:
- smtp must be free to have and use details - working one - as fast as possible - no particular limits
The program also offers to set up ''in-build'' smtp server. If I choose this it works but the message cannot be sent for unknown reason. I don't have firewall and I double checked nothing is wrong with avast antivirus. So I will have to get the smtp details with mentoined four requirements. Don't even know where to search. I found some freeware smtp (or virtual smtp) applications but I need 5 datas to type in and not an application. No idea where to get them. I tried gmal [URL] but its not working, been trying also different ports.
I have an ASA 5500 Firewall. I need to figure out how to log all events using Port 25 to determine if there are any rogue devices on our network. I was trying to figure out how to do this via the Real-Time Monitoring (filter) but have had no success.
We have a cisco 800 series router between the internal network and the WAN. the problem is we are unable to receive some of our mail due to dropped packets by our router. the conversation between the two servers stops at the point were our server responds with the command 250 2.1.5 user@mydomain.com | 354 Start mail input; end with . i was able to trace the packet, using Packet Export, on the internal interface but not on the external interface. Also i have noticed that the external interface has about 160,000 unknown protocol drops while the internal interface has 0.
Is there anyway to find out way the external interface is dropping the packets.
Most examples of NAT translation using an ASA 8.4 are based on servers within a DMZ. In my case it's not because the mailserver also functions as an data and Active Directory server for my local domain. If tried to config the ASA for a while now and throw it in the corner for a couple of months out of frustration. Now I got some time left during christmas break I decided to start again.My purpose is to NAT SMTP / POP traffic from the internet, trough the ASA to my (inside) server. This is what I got so far. With this config I'm unable to telnet the inside server (192.168.1.10) from a remote location.
I can ping 192.168.1.10 from the ASA CLI. I can Ping DNS 4.2.2.2 from the CLI (internet access). I can Telnet the server from the inside LAN, using: telnet 192.168.1.10 25.But I can't Telnet from an outside location using: Telnet 95.*.*.218 25 Because my server is on the Inside interface (diffenrent subnet) do I need an additional route?
I have a ASA 5510 (ver 8.4) and I have been all over the support sites looking for what I am doing wrong. I have a sanitized cut n paste of the OBJECT, NAT, ACCESS-LIST and Packet Tracer output and it keeps failing on the NAT with a rpf-check. Once i get the SMTP flowing I have to open up HTTP and HTTPS to one of the servers also.
Here it is:
RVGW# sh run object object network WiFi subnet 172.17.100.0 255.255.255.0
Below is the interesting part of my config. I have static NAT configured and working inbound for the Exchange Server and the Barracuda, however outbound traffic from those hosts comes out as the interface IP. Thoughts? I've tried a number of things (outside, inside), etc.
I need to configure my ASA 5520 version 7.3 firewall to translate our SMTP server residing in local LAN to use different IP address from the outside interface which is used by all other computers to access Internet. Under NAT section, I have NATted this internal SMTP server with different IP address(eg x.x.x.1) and also translated the remaining IP addresses in the LAN to the outside interface(eg x.x.x.2)
my problem is, Whenever i check the header for message coming from the smtp server it shows that, the SMTP server is also translated by using the same outside interface public ip address(i.e x.x.x.2) which is used by other client machine to access internet instead of the x.x.x.1. How I can get my SMTP server to use separate IP and avoid to be blacklisted by some domain.
I need to configure my ASA 5520 version 7.3 firewall to translate our SMTP server residing in local LAN to use different IP address from the outside interface which is used by all other computers to access Internet.
Under NAT section, i have NATted this internal SMTP server with different IP address(eg x.x.x.1) and also translated the remaining IP addresses in the LAN to the outside interface(eg x.x.x.2)
my problem is, Whenever i check the header for message coming from the smtp server it shows that, the SMTP server is also translated by using the same outside interface public ip address(i.e x.x.x.2) which is used by other client machine to access internet instead of the x.x.x.1.
how i can get my SMTP server to use separate IP and avoid to be blacklisted by some domain.
I'm new to ASA's and PIX units. I've setup a few VPN's now but know next to nothing about logging on these units. I read the config guide for the PIX, but cannot figure out how to get a log of incoming SMTP traffic going on the console.Do I need to use a SYSLOG server? I can probably set one up on my laptop.
We are running ISP and now a days we have many spam in our network, we want block the SMTP port 25 block on Cisco router 7200. So we can block the spam in our network.
I use a RV082 with dual Wan and I cannot configure two SMTP.
Without authentication; a SMTP is specific of the provider.
When WAN1 comes down, SMTP to be used is the SMTP corresponding to WAN2 and vice versa.
Implementation of authentication with the mail server wil be useful. Possibility of two mail servers with indication of the corresponding WAN is also useful.
I use a mail filtering service that delivers mail to me via SMTP on standard port 25 on one of my 5 static external IP's. I wish to restrict this to their IP's only (they have two) and I am unsure on how to do so? As it stands now, anything on the net can talk to my mailserver and my logs are filling quickly with failed attempts as a result. Here's my setup and what I am trying to accomplish:
mail filtering service -> my public ip:25 -> internal mailserver at 10.0.10.2:25, deny everything inbound except traffic from the mail filtering service, I am thinking an ACL would fit the bill here, but unsure of how to implement. Router is an 1811 with version 15.1(4)M3 IOS. WAN is on fa0, lan is on fa1.
I have an RV042 that I have configured to send alert logs to a comcast email address. Recently comcast changed their SMTP port from 25 to 465. I can't find where to change the port settings in the RV042 to send the router logs via port 465.
We are running IOS12.4(5a) on a 2821 and have "ip inspect esmtp" enabled. We noticed that every day several emails end up in the postmaster account with the following message:
"A mail message was not sent due to a protocol error. 500 Firewall Error The message that caused this notification was:"
But the emails in questions are just a few kB. So what is going wrong. This is especially disturbing because the users don't get a notification that the email has not been delivered.
I'm trying to configure a simple ACL to block smtp traffic from leaving my LAN -- basically prevent internal users from setting up internet email accounts in their email clients and sending through that smtp server. i want my Exchange server only to send smtp traffic. here's what i have:
-access-list 102 extended permit tcp host 10.10.1.29 eq smtp any eq smtp <===10.10.1.29 is Exchange
-access-list 102 extended deny tcp any eq smtp any eq smtp
-access-list 102 extended permit ip any any
-access-group 102 in interface inside
after i apply this ACL to the ASA, i am still able to send from my internet email address setup in Outlook using my "foreign" smtp server.
I have an issue with my mail server(SME Server) which is behind a Cisco ASA 5500(firewall) problem is that if one leaves my network they can receive but can not send email via my SMTP also internal people can only send if they use the IP address of the server rather than the domain [URL]
We have hosted spam filter service with 3rd party vendor. My vendor is switching to different spamming services and I need to add ip address lets say 44.33.454.32 to the list of allowed system that can connect to my smtp service. I am going over my firewall 5510 configs and I think I need add the entry like this: “access-list outside-to-inside extended permit tcp object-group obj-44.33.454.32 interface outside eq smtp”. [code]
We have an ASA5510 with the IPS ASA-SSM-10 module installed. All is working well except event notification. When sending a test email from the SSM IPS, we get the error "could not connect to SMTP host". The Exchange SMTP host does allow traffic from the IPS and ASA. I can ping to the SMTP host by IP and name. What am I missing here?
I sold a rv220w to a customer. I've configured it but it seems that the router doesn't allow anonymous smtp. I've configured outlook on a computer with authentification request and it's working fine.
There is a software on a computer that I'm unable to change the authentification and it's not working ( Not able to send message ) I've search in the router and I've disabled these rule : "Block Anonymous ICMP Messages".
I have a ACS 5.1, My mailing server does not run on standard port number of smtp (25). Need to know if i can customize the port number suiting my mailing server requirement.
Cisco works LMS 4 is very complicated tool for me and it is very hard to configure any cisco device what I need to monitor.Currently I have 3750-X configured, properly discovered and added to DCR. I would like to receive SMTP messages(mail) from LMS if some event occurs. For example when link UPDOWN occurs or when LOGIN_FAILED occurs and so on. I tried to configure it in Monitor > Monitoring Tools > Fault Monito, but without siccess. LMS tell me that there are no devices available.How can I configure some notification so it is able to send me message via smtp?
