I sold a rv220w to a customer. I've configured it but it seems that the router doesn't allow anonymous smtp. I've configured outlook on a computer with authentification request and it's working fine.
There is a software on a computer that I'm unable to change the authentification and it's not working ( Not able to send message ) I've search in the router and I've disabled these rule : "Block Anonymous ICMP Messages".
My ISP waits a definite host name from me to return my white IP address via DHCP. Can I set this parameter in RV220W router? I don't find such parameter in IPv4 WAN configuration page.
View 1 Replies View RelatedI have a RV220W (running fw version 1.0.2.4) that i am trying to configure for a client. They are set up on Comcast with 13 available IP's. I should note that this netowrk is now currently running without issue using a Cisco Pix 506e. Unfortunately, the Pix is almost impossible to configure using the GUI now as I have to load a 4-year old version of Java now just to get the PDM to load. But I digress.I've set up the RV using the identical settings as the Pix on bth the LAN and WAN side. When I do, computers on the LAN side can all reach the Internet ok. However, once I enable one-to-one NAT for an internal server, that machine can't send or receive ANY traffic to the WAN side. I've even tried setting access rules enabling ANY traffic in both directions, and that has no effect. Either I'm missing something, or this is just one more bug in this product.
Even though it was a bit of a step down going from the Pix to the RV220W, it was done for the ease of setting up VPN's as I was ready to purchase a second one for a new satellite office opening in a few weeks. It looks like we will be switching vendors on the router side as my faith in Cisco is waning at this point.
My coworker told me that port 25 is closed in office , so I can't use [URL] as SMTP Server and to ask for direct line instead of 25.I don't know how to use/setup direct line
View 4 Replies View RelatedCisco works LMS 4 is very complicated tool for me and it is very hard to configure any cisco device what I need to monitor.Currently I have 3750-X configured, properly discovered and added to DCR. I would like to receive SMTP messages(mail) from LMS if some event occurs. For example when link UPDOWN occurs or when LOGIN_FAILED occurs and so on. I tried to configure it in Monitor > Monitoring Tools > Fault Monito, but without siccess. LMS tell me that there are no devices available.How can I configure some notification so it is able to send me message via smtp?
View 0 Replies View RelatedI use a RV082 with dual Wan and I cannot configure two SMTP.
Without authentication; a SMTP is specific of the provider.
When WAN1 comes down, SMTP to be used is the SMTP corresponding to WAN2 and vice versa.
Implementation of authentication with the mail server wil be useful. Possibility of two mail servers with indication of the corresponding WAN is also useful.
I have an RV042 that I have configured to send alert logs to a comcast email address. Recently comcast changed their SMTP port from 25 to 465. I can't find where to change the port settings in the RV042 to send the router logs via port 465.
View 1 Replies View RelatedI have both WAN1 and WAN2 connected to an ISP but only WAN2 should be used for outgoing mails. How and where can I specify this in the configuration?
View 3 Replies View RelatedRecently my friend has been telling me about all the information websites get from you. I knew they did, but the way he made it seem was that it's a very serious thing. I don't really want people to know what I do. I don't like them knowing where I live, ect. Is there anything I can run so that it reroutes me somewhere else and makes it seem like I am a different person so that the information they gather on me will make it seem like I am a person in Hawaii. or somewhere.
View 2 Replies View RelatedIf I tether my computer to my phone and use the 3G networks IP address, trace the IP to my phone number if they really wanted to? Or am I completely anonymous because whatever tower I'm connected to, thats the designated IP for that tower and there could be dozens of people on that tower's IP as well?
View 2 Replies View RelatedI'm having an issue with the syslog.
My configuration is:
LAN A (RV042)<-> GW to GW tunnel <-> (RV082) LAN B
On LAN A, I got a NAS with a syslog server. On the RV042, I've set the parameters for the syslog server, and it's working fine. On the RV082, I've set the same parameters and noting is happening.
As troubleshooting, I've done the following:
-On the RV082, I can ping the NAS without problems.
-On the RV082, I've set my computer IP adress as syslog server IP and with packet analyser, I not seing any UDP packets.
I found this guide in order to send all traffic from RV042 branch office to the RV082 in the central office: [URL]
But that guide is for v2 hardware. I tried and did not work, so I wonder if there is newer info for v3 hardware (firmware v4.2)
I have a RV042 in a brach office connected via working VPN Tunnel to a RV082 central office. I want to route all traffic from the brach office to the RV082 in the central office.
Is it possible for someone to know the physical computer you use to surf the internet, send e-mails, and post on forums like this?
View 19 Replies View RelatedI have in my work RV016 10/100 16-Port VPN Router, working Ok and connected with 3 ADSL internet lines.
1- The problem is that when any line disconnect from internet it supposed to log this disconnection in internet in system log but it does not
2- I can't understand the option of sending mail with the logs, does it send when i press the button EMAIL LOG NOW, or it supposed to send when any log is added? and how to configure it.
Where/how do we setup an SRP527W to send email notifications? Can't seem to locate the setting when logged in as admin.
View 1 Replies View RelatedI have a wireless network using the cisco ap 1041 converted into the anonymous. however it seems like every morning or evening I have to attached it back to the SSID all over again. it will not give me an ip address. I also would have to put the encryption key in again. I am using WEP 40 bit.
View 4 Replies View RelatedJust installed a RV042 with dual wan connections. Would like to make the WAN 2 (new cable modem as well) the primary connection over WAN1 (DSL), however whenever I switch from WAN1 to WAN2 in Smark Link set up, our email server will not send mail out, even though nothing is blocking the connection.
View 0 Replies View Relatedwhat exactly is QuickVPN?Is it a IPSec VPN?Is it a PPTP?Is it a SSLVPN?can I resolve my local hostnames? That means, can I configure a lokal DNS Server?
View 3 Replies View RelatedI am trying to setup and configure a VPN on the RV220W that uses IPSEC so I can use the Cisco VPN Client I use at work, I have gone through the user manual 11 or 12 times now but still cannot work it out. I cannot find where on the Rv200W iset up the phase 1 authentication username and password which will then lead me onto the phase 2 stage of asking for a username password to allow me access.
View 8 Replies View RelatedPicked up a pair of RV220W's for a project I'm working on. I have several IP's available, 4 of which are assigned to/in use by a server behind the RV220W. All 4 of these IP's are static external IPs. How I can configure the RV220W so that requests to those 4 IP's get routed to the server.
Prior to purchasing this, I was under the impression what I was trying to do was called one-to-one NAT, but after reading the 'Help' document on the one-to-one NAT page, I don't think this is right. Emphasis added below: Cisco RV220W Wireless-N Network Security Firewall Help FirewallOne-to-One NATOne-to-one NAT is a way to make systems behind a firewall and configured with private IP addresses appear to have public IP addresses.One-to-One-NAT Rule TableThis table lists the list of available One-To-One NAT rules configured by the user. Private Range Begin: start ip address in private (LAN) ip addressPublic Range Begin: start ip address in the public ip address (WAN IP), Public IP Subnet Mask: The Subnet Mask of the public IPRange Length: Range length maps one to one private address to public address up to the given range.Service: This column shows service to be accepted by LAN Host.The actions that can be taken on One-to-One-NAT rules are:(Check Box At First Column Header): Selects all the entries in the table.Add: Opens the One-To-One NAT Configuration page, to add a new entry. Edit: Opens the One-To-One NAT Configuration page, to edit the selected entry.Delete: Deletes the selected entries.
So according to their documentation, the server in question would need to be configured with a private IP. Unfortunately, one of the applications I use is licensed via IP address and my understanding is that I cannot use the software with private/non-routable IP addresses.
Is the RV220W capable of not only securing the line (firewall, access rules, content filtering, port trigering & forwarding etc) but also doing what I was hoping to do (keeping the external IP's on the server, and routing appropriately)?
I'm using a RV220W router, and recently got shifted to a dynamic IP solution.Now, I've got a no-ip.org address, but the update service seems to be on no-ip.com. So, I try to enter mydomain.no-ip.org OR mydomain.no-ip.com in the dynamic dns settings, under Host and Domain Name, but when saving the settings it says
'The hostname specified does not exist in this user account' ,which seems to indicate that it manages to login to the update service but gets a negative reply.Is it possible to use the RV220W with no-ip.org/com?
We have 2 sites connected thru 2 RV220W routers via VPN and most things are working fine. I have noticed however, that any device that has a web interface, i.e. our Sharp Copier and our Freenas server, is inaccessible. The page tries to come up but then I get the Cisco "server is down" page generated by the RV220W.
I can pull up the web interface pages if I use a machine on the local LAN but not on any machine across the VPN. The only commonality I can think of is the RV220W blocking that traffic for some reason..
Cisco support write down manual (workaround), how to setup IPsec VPN connection on Mac OS 1.7?
View 5 Replies View RelatedIs there anyway to associate a name to an IP in the RV220W? I am coming from a WRVS4400N v2. Folks are complaining that they can't connect, for example via Real VNC, via the PC name any longer. They have to use the IP address. In the past I put the names of the PCs in the WRVS4400N when I reserved IPs via MAC addresses (some call this assigning static IPs). There isn't any place in the RV220W to put the name. Even when I look at the DHCP list a lot of them show up as "unknown". I am sure this is a NETBIOS thing but I'd rather fix this in the router as I have always done in the past.
View 4 Replies View Relatedi have a RV220W and absolutely nothings functional on this stupid Router, no NAT , no Port Forwarding and I cant access my Network from Outside. Any firmware link for downloading. This address works, its handling special webrequest.
View 1 Replies View RelatedI set up a PPTP VPN with an RV220W recently. It was working flawlessly until a recent power outage and now users are getting the 807 error when attempting to connect. I have PPTP passthrough enabled and TCP/UDP 1723 open. As far as I can tell GRE 47 is open as well. Why it was working and is not working after a power outage?
View 2 Replies View RelatedHaving a strange problem that just started this week and got worse this evening. I have a RV220W that is feeding my network. The RV220W sits behind a broadband modem and acts as the DHCP for the network and those computers access the internet that way. Anyway, tonight started an issue where the the RV220W just disappears. Becomes unpingable. I recycle power, and within anywhere from 5 to 10 minutes, it's gone. No longer pingable. Even if I plug a latop directly into it.If I power cycle the RV220W it comes back and I can ping it and access it and its settings. 5 to 10 mins later, I again lose it. Nothing was done. Its been working fine for a few weeks. Had a similar outage last Tuesday, but a recycle of everything brought everything back into line. After I lose connection to it, the lights I expect to be lit remain lit.
View 1 Replies View RelatedIf I have two Linksys wireless routers in my house, ( 1 Wireless-G as the Gateway attached to the DSL line, and attached to the main computer, and 1 Wireless-b model BEFW11S4v4 that I want to use as a bridge or as a repeater to send the wireless signal around the attic (2 floors away) and I have connected them via Ethernet, and then connected to the attic computer (not the main one) via Ethernet to Wireless-B, why can I not get connectivity on the attic computer?
If I forgo the Wireless-B router, and connect the ethernet to the attic computer everything is fine, but there is no wireless signal in the attic. (only downstairs where the Wireless-G is.) I believe I can access the Wireless-G and tell it to be a bridge or a repeter (?? I think) but as far as I can tell the Wireless-B is giving itself the same IP address as the Gateway Wireless-G is using, and I don't have an connectivity, so I can't change it! Im confused.
Yesterday, I installed the N450 DB and it was probably the easiest install I've ever had to do. One problem though, I can now no longer send or receive email thru Outlook Express 6. Keep getting this message 'The host 'mail' could not be found. Please verify that you have entered the server name correctly. Account: 'mail', Server: 'mail', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D'.
View 3 Replies View RelatedI am using a linksys wrt600N with easylink advisor version 1.6.0042. I am trying to install a video camera and the instruction manual says under "known issues": LinkSys routers have a factory default setting in the firewall menu called "filter anonymous internet requests". If you want to access your camera from the internet you have to uncheck this option."I see this option in the WRT600N manual, but it references a software choice that I don't have.I have gone to the website and downloaded the latest compatible software version, and I still don't have the choice to uncheck this option.
View 2 Replies View RelatedI am unable to make UPnP to work on the RV220W. I am forced to use port forwarding.
View 10 Replies View RelatedNothing happens when clicking the SAVE button after making changes on the VLAN Membership screen when using IE9, but it work fine with IE8. Any problems using IE9 during configuration?
View 4 Replies View RelatedWhen someone downloads a file, or similar, there seems to be no, or very little, room for other requests. I've even tried to be the only one on the network, start a download (from ex. Intel) and then tries to access a simple website, almost only text, and its extreemly slow. I hav ethe latest firmware, a windows domain network and the routers is not acting as dhcp server.
View 4 Replies View Related