I'm hosting my email on an Exchange Server 2003 box and have my laptop (Vista Ultimate 32 bit) setup to connect to the exchange server for my email. This works fine through a LinkSys RV042 in one location and a LinkSys WRT54GC in another, but fails through the DIR-615 B2 (2.24 firmware) at home. I'm guessing it's blocking something needed for the MAPI connection.
View 2 RepliesI have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
1. How FWSM create xlate table like that? I mean it look like NAT0 for 158.137.21.26 but it doesn't has any nat rule for 158.137.21.26 on firewall.
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
3. After clear xlate global 158.137.21.26, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.
We are upgrading from a Pix 515e to a ASA 5510 with CSC SSM. We cannot send outbound email or receive any email from the outside world. I have placed a call with Cisco Support with no luck. [code]
View 1 Replies View RelatedSince I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems.
View 6 Replies View RelatedI just recently installed a RV220W at my office and (almost) everything works fine. I have noticed that when my iPhone is connected to the RV220 wi-fi network, I get the message "The connection to the server failed" when checking my email. If I disable the wireless on my iPhone, it connects up to the exchange server perfectly fine so it must be a setting with the wireless somewhere but I cannot find it anywhere.....
View 1 Replies View RelatedUp to this point, all the computers on the network accessed the e-mail server via the Windows name of the PC running the e-mail server. However, one of the PCs will need to access e-mail from the WAN soon as opposed to the LAN, so I switched the server name in Thunderbird (e-mail client) to the actually fully qualified domain name of the server (registered at NO-IP, which redirects to the e-mail server at home).
The problem I am running into is that all the requests sent for IMAP or SMTP are being blocked by the router. That's even though I added port forwarding rules for them. The logs show messages similar to the following:
"Blocked incoming TCP connection request from 216.168.101.68:51291 to 216.168.101.68:143"
It doesn't make a difference if I change the endpoint filtering to "Endpoint Independent" either. Any thoughts of what else I can try? DMZ is not an option.
the 942L is up and running but I ain't getting no email snapshots nor video clips.I think the menu for setting up the "Video Clip" and "Snapshot" is severely lacking info for users like myself; what to type in the smtp field, the sender or recipient email fields, and especially not username and password. Do I put my email username and password there, or my MyDlink login email and password?
View 1 Replies View RelatedI am new to Exchange Server 2007 . I want to know that in order to implement Exchange Server do I need to register Domain name like [url]... ? OR A FQDN of Active Directory can work.Is it compulsory to register domain ?
View 3 Replies View RelatedWe use microsoft exchange for outlook. I want to know which ports are being used by our exchange server to receive and send emails. Is it possible to check that?
View 1 Replies View RelatedAdd static route for new exchange server?
View 1 Replies View RelatedCurrently, my company runs a DC and exchange server in the building. It is also hosting our website with IIS7. All AD users currently have @company1.com.au email addresses.We have just started an off shoot company and would like to setup emails in exchange so that we can automatically assign and manage emails on the same exchange server. so that each user hasWhat is the best way to do this?At the moment, company2.com - company is hosted outside with someone else. Is there a way that he can direct the mail to us so that he hosts the website but we host the email server?
View 1 Replies View RelatedWe have a ASA5510 with a webserver in the DMZ network 10.2.2.0/24. We now want this web server to be able to access the Exchange server in the Inside network 10.1.1.0/24. I researched this and it seemed straight forward according the the Cisco document below:
[URL]
I'm looking to do this with smtp so I added these lines to the config:
static (inside,DMZ) 10.2.2.30 10.1.1.11 netmask 255.255.255.255
access-list dmz extended permit tcp host 10.2.2.2 host 10.2.2.30 eq smtp
The configuration line:access-group DMZ in interface DMZ Already existed in the configuration so didn't need to be re-entered.
ASA Version 8.0(4)
!
hostname xxxx
domain-name xxxx.com
enable password xxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
names
[code]....
since upgrading to 8.4(1) on our ASA 5520 I've had nothing but issues with our email server not being able to send out emails (timeouts,corruption, etc) and tried everything and then it dawned on me to turn off ESMTP inspection on the ASA's.Since I've down that our Exchange server SMTP works perfectly again.Why is it that ESMTP corrupts emails so badly from exchange server? (ours is a 2010 sp1)does anyone actually use ESMTP inspection at all?
View 3 Replies View RelatedBasically the problem that I have is that I have a new Exchange server sitting on 192.168.12.2 IP address and on the router I have this NAT enabled
ip nat inside source static tcp 192.168.12.2 110 212.115.5.5 110 extendable ip nat inside source static tcp 192.168.12.2 25 212.115.5.5 25 extendable
The Exchange can receieve emails but it will not send them. It cannot make connection to any of the smart hosts on port 25 or can't even send mail using DNS. When I run telnet my.smarthost.com 25 it will not connect but if I run that from the router then it connects fine.
I am deploying a Cisco 1841 in place of our basic DSL router.I have an ADSL WIC and FA0/0 connected to our LAN.LAN IP ADDRESS range is 192.168.1. 0/ 24 I have dynamic and static NAT configured. At this point although I have ACL's configured I have NOT implemented them as yet for the following reason. I am unable to recieve inbound SMTP traffic - now know my MX records are correct as this all owrks happily on our basic DSL router. I can send external emails no problem and all internal email works fine. [code] I am in the process of defaulting the router and programming the barbones to get the link working and see if inbound SMTP works then start building the blocks again.
View 4 Replies View Related My customer has SSL certificate already installed on microsoft exchnage 2010 servers and now wanted to import that certificate to cisco ACE4710.
How to trace the exact procedure to import the SSL Cert to ACE from microsoft exchange server and how about the KEY, from where I should get the KEY to cross verify for SSL Cert?
Is there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510?
View 1 Replies View RelatedIs there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510?
View 2 Replies View RelatedI have an ASA 5505 with the base license,When I setup the DMZ interface I had to add the deny access to the inside VLAN. The DMZ works fine with WiFi on it, but user's iPhones can't get email unless they turn WiFi off.Is there a simple way to allow HTTPS traffic through the DMZ interface to our internal Exchange server which is NAT'd on the 5505's external IP?
View 3 Replies View RelatedPresently I'm using the Wireless 150 DIR 600 router to share a internet connection between my desktop (with LAN cable from LAN port in Desktop PC connected to LAN port in router) and Laptop connecting wireless to router. Now I also want to create a LAN connection between my Desktop (LAN cable connected to router) and Laptop (wireless) using the same router. Is it possible ? If yes, how can do it ?
View 5 Replies View RelatedI would like to know how to setup my e-mail on my computer.
View 1 Replies View RelatedI can connect to Internet perfectly fine. I can even VPN back into my office. However, once connected via VPN and I launch my Outlook Client, I'm not able to connect to get emails. When I run a "netstat -a", I get my "SYN_SENT" to all my office domain controllers and exchange servers.However, if I connected via my Starhub USB Broadband dongle, everything works perfectly fine.What settings do I need to do on my router? I tried port forwarding and application rules but none worked.
View 4 Replies View RelatedModel : TL-WDR3500
Hardware Version : Not Clear
Firmware Version :
ISP :
As we say, I followed all the directions but I am unable to setup the ftp server on this router. I even disabled Norton's firewall but am unable to access the server via WAN.
I need to setup a new User ID and Password because of this "email outage" I have a ticket number MAEH04QRPZ
View 3 Replies View RelatedRegion : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_121225
ISP : Ziggo
Set up the WDR4300 with a USB drive connected (Platinum MyDrive CP 500 GB USB 3.0).Enabled the Media server, shared the entire drive, stuck an test .avi on there.My laptop has no trouble playing it from the attached storage, my Xbox sees the folders and files, recognizes them as playable formats but then does nothing once I hit play to get the file going.If I copy the exact same file to the shared folders on my laptop, navigate from the Xbox to that location it streams within the second.Also tried the same thing with a 16 Gb USB thumbdrive, same result.
I have a PC on a crowded network that cannot handle much more bandwidth usage.I am now going to have a tons of transferring to do offsite so I added a second internet line just to deal with the influx of file transfers.I tried a dual WAN setup on my router and the performance was not improved (if it was nobody noticed it) so I said forget that idea, I only need to do these massive transfers from 1 PC so I will just add a second NIC to the machine so that the 1st NIC can maintain local network functionality and the 2nd NIC will be just for internet traffic (sending files up/down to offsite location) Essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfes to offsite location through seconday internet line.So now I have a desktop PC with two NICs. One of them built into the board, the other a pci add on nic. they are both 10/100
On nic1, there is a connection to my network 200.200.1.X which is the internal network for Exchange, local files transfers etc. This is the network i have always had connected and I have no problem connecting to my exchange server etc. (my server is providing dns/dhcp/wins/AD/MSE for the entire network)so I installed a secondary NIC and a secondary network line to the NIC2 on the machine.I set it up with an IP, a SN, a gateway and a DNSI removed the gateway from the 1st NIC.SO then I tried adding a gateway to BOTH of the NICs..This allows me to do EVERYTHING I want, however when i go to whatismyip.com and get a result, the IP it is giving me is NOT either of my static IPs (each network has a seperate internet line with a static IP). Not sure where this IP is coming from, but if i tracert google.com it says I am going out through the primary adaptor.The new IP from whatismyip.com makes no sense to me as it is not either of my static IPs, however it is very close.Would this be a situation where my ISP see's I have 2 gateways defined so it generates a 3rd external IP for some reason? Never heard of this but i am no guru.essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfers to offsite location through seconday internet line.
I can't send my email using my laptop
View 2 Replies View RelatedWhere/how do we setup an SRP527W to send email notifications? Can't seem to locate the setting when logged in as admin.
View 1 Replies View RelatedRunning Win7. When trying to connect Lenovo laptop to E2000 with Easy Setup Key, the progress bar hangs at 25%. However, the E2000 will connect to the laptop with an Ethernet cable. Same problem on both of my Lenovo G555 laptops.
View 4 Replies View RelatedAfter running the installation CD on my laptop, it cant detect any wireless network. It givs me an error saying that Your router set up was not successful.
View 2 Replies View RelatedI received 3 emails on my laptop and haven't received another since. Why isn't my emails coming through on my laptop but coming through just fine on my desk computer?
View 2 Replies View RelatedI have just setup a E2000 at home. All the wireless connections work and also my NAS server who i wired. But when i try to setup my wired media server it will not connect.
View 6 Replies View RelatedI've recently purchased a domain name from GoDaddy, and I'm having trouble setting up my server, which is running Windows Server 2003, to run email using the domain name. Before purchasing, I was using a free domain from DynDNS and it worked using it as an domain address. I'm wondering if maybe I have to set up the DNS on GoDaddy to foward the email protocol to my server.
View 2 Replies View Related