Cisco Wireless :: RV220W / Unable To Connect To Exchange Server With IPhone
Aug 21, 2011
I just recently installed a RV220W at my office and (almost) everything works fine. I have noticed that when my iPhone is connected to the RV220 wi-fi network, I get the message "The connection to the server failed" when checking my email. If I disable the wireless on my iPhone, it connects up to the exchange server perfectly fine so it must be a setting with the wireless somewhere but I cannot find it anywhere.....
View 1 Replies
ADVERTISEMENT
Dec 30, 2012
Since I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems.
View 6 Replies
View Related
Nov 27, 2012
Guestconnect SSID configured on 5508 WLC with Pass through athentication (NAC guest server). No issue with Laptops and Iphone/Ipad ver 4and 5. Only Iphone Ver 6 users unable to access Guest connect .
View 9 Replies
View Related
Jun 19, 2010
I have a WRT120N that is connected to a cable broadband modem. I have my desktop computer connected via cable to the WRT120 and that works fine. However, I am not able to connect to the WRT120N with the iPhone. I get the message, :Unable to join the network "<network name>".I've searched on the boards, but cannot find anything specific to the WRT120N and iPhone.
View 9 Replies
View Related
Apr 12, 2009
I'm hosting my email on an Exchange Server 2003 box and have my laptop (Vista Ultimate 32 bit) setup to connect to the exchange server for my email. This works fine through a LinkSys RV042 in one location and a LinkSys WRT54GC in another, but fails through the DIR-615 B2 (2.24 firmware) at home. I'm guessing it's blocking something needed for the MAPI connection.
View 2 Replies
View Related
Sep 10, 2011
I am getting the following flooding the logs on my RV220W (IP Address replaced with X.X.X.X)
2011-09-12 00:58:54: [rv220w][IKE] ERROR: Invalid exchange type 243 from X.X.X.X[500].
2011-09-12 00:58:54: [rv220w][IKE] ERROR: Could not find configuration for
[Code].....
These are all coming from the same IP Address which is running Windows 7 Enterprise X64 using a WIRED connection.
View 3 Replies
View Related
Jul 19, 2012
I have a Linksys WRT120N which had suddenly and unexectedly stopped working after disconnecting my roku box. I didnt worry about it until I got an Iphone and now .I was able to re-establish the wireless connection on my netbook today after a ton of research and messing around with the settings and then downloaded network magic, which finally fixed the problem. I believe that it automatically transmitted the WEP key to the Netbook, which is what I am missing when I try to log into the network on the Iphone.How do I get this password to show up on Network Magic? When I look at the settings, it does not show the actual numbers, they are hidden.
View 6 Replies
View Related
Dec 19, 2011
I provide support for a small business network. ISP: Silo Wireless (wireless point to point with ISP) Router: Cisco RV220W Wireless-N Network Security Firewall
The router is configured with two wireless access points with SSIDs: "abracadabra" and "abracadabra-guest". The only difference between these two wireless networks is their passcode. Up until now I have had no problem connecting devices to either wireless network.
My problem lies with an HP Pavilion laptop running Windows Vista Home Premium 32-bit that I'm trying to connect to the "abracadabra" wireless network.
Network and Sharing Center shows "Identifying" for a while and then shows "Unidentified network" with no local or internet access. Wireless network connection status says that Media State is Enabled, Speed is 54Mbps and Signal Quality is Excellent. Network Connection Details shows that DHCP is Enabled but it's getting an Autoconfiguration IPv4 address of 169.254.107.138...
The laptop is running ESET Nod 32 Antivirus 5 and Windows Firewall and I've disabled Windows Firewall on the Wireless Network Connection. I've also tried re-installing the wireless nic driver, it's running the latest from Windows Updates.
what really gets me is that the laptop can connect to "abracadabra-guest" fine and access the internet
View 3 Replies
View Related
Jun 20, 2011
I just successfully setup my wireless Netgear router to work with my laptop and desktop. I now want to get my iPhone to connect to it as a WiFi connection. It sees the available network after I enable WiFi, but when it tries to connect, it just says "unable to connect" or something after I input the password.
My current password shows in the Netgear router (through 192.168.1.1) in the "passphrase" field under Wireless Settings, and it's cp6s-n3rb-ziav. This is what I put in the password field for my particular network in the iPhone before it tells me it can't connect.
There is an option on the left column in the router for "Set password," but it's just to change it to something else. If my iPhone won't accept the current one, I don't see why it would accept a new one, and then I'd have to go and change it in the laptop, too. Without knowing if that's the issue, I'm holding off on that for right now.
View 2 Replies
View Related
May 21, 2012
I recently tried resetting my router (dlink dir-655). I am able to connect using my iphone and my mbp if I did not make use of a secure connection. I tried putting a password on a new ssid. My ipad 2 and 2 other windows laptops are able to connect without any problem. My iphone 4s was having a hard time connecting to the new ssid. It does not connect automatically just in case I turn on and off my wifi connection for the iphone. I have to type in the wpa password whenever I had to go online again. FYI, I tried resetting my iphone several times and I still get the same response. As for my mac, it was far more much worse. Whenever I tried to connect to my router. It usually says connection time out. I tried resetting the router one more time again. I had to put in the old ssid and the old wpa password. My Iphone 4s was abe to connect automatically. My mbp did the same thing also.
View 1 Replies
View Related
May 24, 2011
I am using RV220w router firmware 1.0.1.0
I can connect to the SSL VPN server using XP,windows 7 and window 2003 all 32bit stack 1. When I go to use windows 7 Prof. 64 bit IE v8 it will not connect. I dont even get where the laucher install. I get the error Please enable active X or make sure your site is trusted. All of this has been set yet it will not work. I also get the following error
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729)Timestamp: Wed, 25 May 2011 18:00:28 UTC
Message: Object required: 'VPLaunch1'Line: 212Char: 1Code: 0URI: [URL]
the source code is ref. line 212
}
View 1 Replies
View Related
Nov 28, 2012
I have a Wag 160n router which works fine with desktop pc connected by ethernet & wirelessly to laptop. My nokia phone finds the wi-fi signal but apple i-phone & ipad dont!
View 0 Replies
View Related
Aug 19, 2011
I am looking to purchase the RV220W router. I am interested to know if I can use the iPhone/iPad to create a VPN connection to this router.I have seen a lot of conflicting information about this so I am looking for a confirmation.
View 15 Replies
View Related
Aug 22, 2011
i have try to make a IPSec VPN Connection from my iPhone to my RV220W.
On the iPhone i get the message "The VPN Server was not found".
It is possible to make a IPSec Connection or only a PPTP ?
View 4 Replies
View Related
Apr 13, 2013
I am new to Exchange Server 2007 . I want to know that in order to implement Exchange Server do I need to register Domain name like [url]... ? OR A FQDN of Active Directory can work.Is it compulsory to register domain ?
View 3 Replies
View Related
Mar 3, 2012
We use microsoft exchange for outlook. I want to know which ports are being used by our exchange server to receive and send emails. Is it possible to check that?
View 1 Replies
View Related
Sep 11, 2012
Add static route for new exchange server?
View 1 Replies
View Related
Aug 16, 2011
We have a ASA5510 with a webserver in the DMZ network 10.2.2.0/24. We now want this web server to be able to access the Exchange server in the Inside network 10.1.1.0/24. I researched this and it seemed straight forward according the the Cisco document below:
[URL]
I'm looking to do this with smtp so I added these lines to the config:
static (inside,DMZ) 10.2.2.30 10.1.1.11 netmask 255.255.255.255
access-list dmz extended permit tcp host 10.2.2.2 host 10.2.2.30 eq smtp
The configuration line:access-group DMZ in interface DMZ Already existed in the configuration so didn't need to be re-entered.
ASA Version 8.0(4)
!
hostname xxxx
domain-name xxxx.com
enable password xxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
names
[code]....
View 28 Replies
View Related
Aug 28, 2012
Currently, my company runs a DC and exchange server in the building. It is also hosting our website with IIS7. All AD users currently have @company1.com.au email addresses.We have just started an off shoot company and would like to setup emails in exchange so that we can automatically assign and manage emails on the same exchange server. so that each user hasWhat is the best way to do this?At the moment, company2.com - company is hosted outside with someone else. Is there a way that he can direct the mail to us so that he hosts the website but we host the email server?
View 1 Replies
View Related
Mar 18, 2011
since upgrading to 8.4(1) on our ASA 5520 I've had nothing but issues with our email server not being able to send out emails (timeouts,corruption, etc) and tried everything and then it dawned on me to turn off ESMTP inspection on the ASA's.Since I've down that our Exchange server SMTP works perfectly again.Why is it that ESMTP corrupts emails so badly from exchange server? (ours is a 2010 sp1)does anyone actually use ESMTP inspection at all?
View 3 Replies
View Related
Sep 18, 2011
Basically the problem that I have is that I have a new Exchange server sitting on 192.168.12.2 IP address and on the router I have this NAT enabled
ip nat inside source static tcp 192.168.12.2 110 212.115.5.5 110 extendable ip nat inside source static tcp 192.168.12.2 25 212.115.5.5 25 extendable
The Exchange can receieve emails but it will not send them. It cannot make connection to any of the smart hosts on port 25 or can't even send mail using DNS. When I run telnet my.smarthost.com 25 it will not connect but if I run that from the router then it connects fine.
View 1 Replies
View Related
Jan 10, 2011
I am deploying a Cisco 1841 in place of our basic DSL router.I have an ADSL WIC and FA0/0 connected to our LAN.LAN IP ADDRESS range is 192.168.1. 0/ 24 I have dynamic and static NAT configured. At this point although I have ACL's configured I have NOT implemented them as yet for the following reason. I am unable to recieve inbound SMTP traffic - now know my MX records are correct as this all owrks happily on our basic DSL router. I can send external emails no problem and all internal email works fine. [code] I am in the process of defaulting the router and programming the barbones to get the link working and see if inbound SMTP works then start building the blocks again.
View 4 Replies
View Related
Nov 16, 2011
My customer has SSL certificate already installed on microsoft exchnage 2010 servers and now wanted to import that certificate to cisco ACE4710.
How to trace the exact procedure to import the SSL Cert to ACE from microsoft exchange server and how about the KEY, from where I should get the KEY to cross verify for SSL Cert?
View 2 Replies
View Related
Dec 27, 2011
Is there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510?
View 1 Replies
View Related
Aug 24, 2011
my iphone will not accept my router password. when i begin entering the p'word in the iphone setup screen the "join" button turns off.
View 2 Replies
View Related
Dec 26, 2011
Is there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)? OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510?
View 2 Replies
View Related
Apr 23, 2012
I have an ASA 5505 with the base license,When I setup the DMZ interface I had to add the deny access to the inside VLAN. The DMZ works fine with WiFi on it, but user's iPhones can't get email unless they turn WiFi off.Is there a simple way to allow HTTPS traffic through the DMZ interface to our internal Exchange server which is NAT'd on the 5505's external IP?
View 3 Replies
View Related
Aug 7, 2011
I had PCs, Macs and other devices (iphone, itouch) able to connect fine to the WRT610n. I moved to an apartment and when I turned the network on all the devices could connect expect for the iphone and itouch. I have tried turning the wireless security off and MAC filtering off . I get the same "Unable to join the network" message.
View 7 Replies
View Related
Mar 22, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : telecentro
I recently purchased a tl-wr842nd, my printer is a hp laserjet 1020 and it is in the compatible list as I seen. The problem is that I connect the printer in the usb routers port and the led do not light up, I tried putting my pendrive to see if the usb routers port wasn't working but it does since the pendrive is accepted and online and the usb led lights.I downloaded and installed the latest firmware but there's no change, I did everything like it saids in the faq 415 where it explains how to install and use printer server with no luck.
View 1 Replies
View Related
Sep 19, 2012
My EA4500 router seems to drop mine and my wife's iPhone wifi connection at what appears to be the edge of my router's range. When we come back in range, our iPhone's intermittently give the error "Unable to join network.". And we're stuck in that mode. When I check the Devices menu in the CCC interface, I notice the iPhone device is configured and still online. However the "x" box to delete the device is greyed out because it's online. So how do I get out of this state and have my iPhone connect
View 2 Replies
View Related
Jun 8, 2011
Few days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
View 3 Replies
View Related
Nov 23, 2008
I'm running LMS 3.1 with CM 5.1.0 on a single Solaris 9 server. I've been unable to open topology services. I get an error "cannot connect to ANI server". I've confirmed that the ANIServer6.0 is running (it says "Running with busy flag set"). I've also tried restarting the Daemon Manager. What should I look at? Could it be a Java problem?
View 16 Replies
View Related
Mar 5, 2013
connected to internet but not able to open the websites and also not able to ping client computer with server.
View 1 Replies
View Related
