D-Link DIR-655 :: Macbook Pro And Iphone 4s Unable To Connect Consistently To It
May 21, 2012
I recently tried resetting my router (dlink dir-655). I am able to connect using my iphone and my mbp if I did not make use of a secure connection. I tried putting a password on a new ssid. My ipad 2 and 2 other windows laptops are able to connect without any problem. My iphone 4s was having a hard time connecting to the new ssid. It does not connect automatically just in case I turn on and off my wifi connection for the iphone. I have to type in the wpa password whenever I had to go online again. FYI, I tried resetting my iphone several times and I still get the same response. As for my mac, it was far more much worse. Whenever I tried to connect to my router. It usually says connection time out. I tried resetting the router one more time again. I had to put in the old ssid and the old wpa password. My Iphone 4s was abe to connect automatically. My mbp did the same thing also.
View 1 Replies
ADVERTISEMENT
Jan 8, 2013
I use a Dell 2010 laptop. I have consistently been able to use wifi. On 1 Jan I moved into a new apartment shared with a friend. My friend allows me to use the wifi by sharing the password. My friend's computer is a MacBook. But I cannot access wifi! Why is that? I am able to see the available connections and to see the one that my friend is using. But I am unable to access it. I tried manually adding the new wifi network. It shows up with "limited access" -- it does not enable use of internet.
View 1 Replies
View Related
May 21, 2012
No issues with other wireless devices in the house (HP laptop, Roku and an Android phone).
I've confirmed that the correct WEP security setting is selected. I've tried using every available key to no avail. I've reset the security keys. The latest firmware is installed (1.0.04) I've powered the router on/off.
[URL]
View 2 Replies
View Related
Dec 25, 2012
About six months ago I replaced my old router (some generic 802.11b/g router I got for free with a rebate years ago and which lasted a few years) with a Dir-601 after the old router started intermittently cutting out. Setup of the Dir-601 was straightforward enough and I have WEP enabled. Both my Macbook and my wife's Macbook can connect fine if we choose the router from the drop-down wireless network list, and the router has been consistently reliable in maintaining a connection as long as the OS is running.
HOWEVER, neither computer will remember the wi-fi network and won't auto-connect when waking up from sleep or after a restart. Our iPhone and Android smartphones remember the network just fine and auto-connect every time, zero issues. I've gone through all the typical Mac troubleshooting steps, deleting saved network connections and re-establishing new ones. Never solves the problem. We always have to go to the wireless network menu and manually select the wifi connection to connect to.
It's not the Macbooks. Firstly, both macbooks have the same issue, and they're each running different MacOS versions, so there's no version-specific issue that can be at play here. Secondly, neither macbook had this issue with any previous wifi router. Thirdly, anywhere else we take our macbooks where we've set up a wifi connection, they remember it and auto-connect without us having to manually select the network. The only network where we have to manually select the network every time is the one set up with the Dir-601. In fact, we're at my inlaws for the holidays and our Macbooks have been auto-connecting to their router each and every time.Is there a setting I'm not seeing on the Dir-601 admin page?
View 3 Replies
View Related
Sep 3, 2009
I have just purchased a DIR-825. Set up went through without a hitch. (I have it wired, not wireless at the moment). But I am consistently dropping my connection to the internet/Lan . I have a dual boot system (WinXP-Win7) and it's happening on both platforms, so i know it's not an OS problem. I have reverted to my old DIR-604 out of frustration. I was hoping you might have suggestions or a potential solution before I contact customer support for official assistance (if it exists) on this matter.
View 14 Replies
View Related
Aug 24, 2011
my iphone will not accept my router password. when i begin entering the p'word in the iphone setup screen the "join" button turns off.
View 2 Replies
View Related
Dec 8, 2012
My laptop's wifi is just working fine with TP Link but I'm unable to connect internet via wifi on my iPhone 3G. My iPhone's wifi just works fine in my office. Is there any solution available?
iPhone 3G 8MB
iOS 4.2.1
Modem Firmware: 06.15.00
Router: TP LINK TL-MR3220
Firmware Version: 3.13.12 Build 120524 Rel.60134n
Is there additional setting for iPhone?
View 1 Replies
View Related
Jun 20, 2011
I just successfully setup my wireless Netgear router to work with my laptop and desktop. I now want to get my iPhone to connect to it as a WiFi connection. It sees the available network after I enable WiFi, but when it tries to connect, it just says "unable to connect" or something after I input the password.
My current password shows in the Netgear router (through 192.168.1.1) in the "passphrase" field under Wireless Settings, and it's cp6s-n3rb-ziav. This is what I put in the password field for my particular network in the iPhone before it tells me it can't connect.
There is an option on the left column in the router for "Set password," but it's just to change it to something else. If my iPhone won't accept the current one, I don't see why it would accept a new one, and then I'd have to go and change it in the laptop, too. Without knowing if that's the issue, I'm holding off on that for right now.
View 2 Replies
View Related
Jun 19, 2010
I have a WRT120N that is connected to a cable broadband modem. I have my desktop computer connected via cable to the WRT120 and that works fine. However, I am not able to connect to the WRT120N with the iPhone. I get the message, :Unable to join the network "<network name>".I've searched on the boards, but cannot find anything specific to the WRT120N and iPhone.
View 9 Replies
View Related
Nov 28, 2012
I have a Wag 160n router which works fine with desktop pc connected by ethernet & wirelessly to laptop. My nokia phone finds the wi-fi signal but apple i-phone & ipad dont!
View 0 Replies
View Related
Nov 27, 2012
Guestconnect SSID configured on 5508 WLC with Pass through athentication (NAC guest server). No issue with Laptops and Iphone/Ipad ver 4and 5. Only Iphone Ver 6 users unable to access Guest connect .
View 9 Replies
View Related
Jul 19, 2012
I have a Linksys WRT120N which had suddenly and unexectedly stopped working after disconnecting my roku box. I didnt worry about it until I got an Iphone and now .I was able to re-establish the wireless connection on my netbook today after a ton of research and messing around with the settings and then downloaded network magic, which finally fixed the problem. I believe that it automatically transmitted the WEP key to the Netbook, which is what I am missing when I try to log into the network on the Iphone.How do I get this password to show up on Network Magic? When I look at the settings, it does not show the actual numbers, they are hidden.
View 6 Replies
View Related
Aug 21, 2011
I just recently installed a RV220W at my office and (almost) everything works fine. I have noticed that when my iPhone is connected to the RV220 wi-fi network, I get the message "The connection to the server failed" when checking my email. If I disable the wireless on my iPhone, it connects up to the exchange server perfectly fine so it must be a setting with the wireless somewhere but I cannot find it anywhere.....
View 1 Replies
View Related
Jul 9, 2011
I had a DI-524 for years and I had no problem. My girlfriend wanted more range /speed for her netbook, and bought a DIR-655.
Had no problem with the netbook (acer One) and the Wii. But the Iphone 1st gen (cracked, but working good up to now) won't see any Wifi.
What to say. I have to read the F* manual, I know. But Geez. "The high end" said the guy at the store.
I should have search the web a bit more before buying because this subject (iphone connect problem) is a popular topic. [URL] won't change a thing. The Iphone don't see the wifi network.
Hardware Version: B1 Firmware Version: 2.00NA
View 5 Replies
View Related
Apr 14, 2013
I set up a DIR-655 router for a friend 4 years ago and it's worked reliably with all of their equipment since. They have wireless printers, iMacs, pc laptops and iPhone 4S's, all connecting without any problems. Recently, they got an iPhone5 and it will not connect to their home wireless automatically, they have to re-enter the password each time. They've tested their iPhone 5 on other networks and they do not have to re-enter the password. Apple and ATT are blaming the router. I do not live near them and I'm going to have to facilitate them remotely. At this point, I believe their router is configured with WPA2, but I can't be sure. Which configuration will work with the iPhone 5, as well as their other, older, devices that have worked for 4 years
View 1 Replies
View Related
Dec 11, 2012
Model : TL-WR741ND
Hardware Version : V1
Firmware Version :
ISP : EOLO
give me procedure for connecting WiFi to iPhone.The phone recognizes the router, but will not connect.No numbers, i.e. 192.168.1.1, etc are loaded No DNS loaded?
View 2 Replies
View Related
Apr 7, 2011
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies
View Related
Dec 4, 2011
Have had an issue with a previous Belkin router and having similar issues with current DIR 825. Internet is dropped when opening up the Mac Book (Using N or G). Sometimes the internet connection still works with i Pad and iPhone, sometimes it doesn't. As well, sometimes I can turn WiFi off on the Mac Book and then turn it back on, and it will work for about the time it takes to load one webpage and then it will cut out again.
Every time this happens I can unplug the power from the router and plug it back in which has fixed the issue in every case.
HW ver is B1
FW ver is 2.05
ISP is Cable
Modem is standalone.
View 1 Replies
View Related
Feb 15, 2012
I have a broadband ADSL modem and the internet is connected to the computer yet it is not registering with the macbook book. It says that the internet is connected but as soon as I go onto Safari, it says the internet is not connected.I urgently need internet on my macbook!
View 1 Replies
View Related
Aug 4, 2012
I I'm trying to connect to starbucks wi-fi with my Mac book but it says it's impossible to connect.
View 1 Replies
View Related
Jan 17, 2013
I just got another DCS-930L. I have set these up to work wirelessly before but my question is why can't I connect it directly to my ethernet port and be able to get into the web interface by typing the default IP address without using a utility or installation software? I have tried to assign a manual IP to it but that didn't work. So here is what I want to do: Plug the camera into the ethernet port of my MacBook Pro and just view what the camera sees.
View 7 Replies
View Related
Nov 8, 2011
I purchased this router and a Motorola Surfboard SB5101U for my home network. My current set up at home for devices connected to router are as follows:
2 Macs and 2 iphones - Wireless
2 Directv boxes, 2 blu-ray players and xbox360, Ethernet cabling.
The issue I am having is that everyday at-least 7-8+ times my internet will just stop coming through. I never lose connection to the router it's self. But I cannot load webpages/content on any of my devices. They always show as being connected fine to the router though. I have attempted to call Cox cable, my ISP, to resolve the issue. And I am always told that everything looks fine on their end and that the issue must lie with the connection between the Modem and router. The rep then walks me through a complete reboot of both router & modem and of course, the issue is resolved 100% of the time. I am trying to fix the issue my self to avoid a $50 service call fee from Cox which could still not fix any issues at all. Since I have done some searching and found some advice on making changes to the configuration of the router. But time after time I continue to get the same issue.
View 14 Replies
View Related
Aug 30, 2012
I can not connect my new Mac Book Pro to Verizon wireless. I have no trouble connecting my old Mac to it, so what is the problem with the new Mac. I have to use the ethernet wire which is a problem when I am so use to wireless.
View 4 Replies
View Related
Jan 30, 2013
Region : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
View 2 Replies
View Related
Aug 8, 2011
Every time i load up EVE online my router resets as if id pressed the reset button.Its a Netgear, model number CGD24G, and my ISP is Roadrunner Cable. It happens consistently every time i get into the Game, Eve Online, and it just happened recently, as ive been playing it these past few days.
View 3 Replies
View Related
Dec 2, 2009
I just bought a Linksys WRT160N router. I pop the installation disk in my mac book pro and walk thru the installation procedure successfully.But I can't connect wirelessly from my MacBook Pro (running mac os x 10.5).It sees the router and I did type in the password correctly (i copy from the text file generated by the installation procedure), but I keep getting 'coonnection timeout'.
View 9 Replies
View Related
Mar 20, 2010
I just replaced my WRT54G with a WRT120N. Everything is working fine, but...
My MacBook Pro (about 18 months old) claims to support a/b/g/n, but it only wants to connect using 802.11g. It's running Snow Leopard. The laptop and the router are about 3 feet apart. Is there some incompatibilityin the version of 802.11n they support?
View 9 Replies
View Related
Oct 9, 2011
I am trying to connect macbook air with cisco 1100 access point,but it is not connecting.
View 1 Replies
View Related
Jul 3, 2011
I have a ASA 5505 VPN Concentrator using ADSM 5.2 connecting to a BEFSX41 router. Its a pretty simple set up that has been working for years. However, over the past several weeks the VPN tunnel is consistently dropping every day or two, however both side are able to ping the internet at all times. My current work around is to manually log into the BEFSX41 router and re-connect the VPN tunnel, which simply connects immediately. The tunnel will stay up for about a day or two until it reliably drops the tunnel connection. Every time the tunnel drops I get an alert with an error message: [code] After doing searches about what this error means, all I can find is that its supposed to mean there is a problem with the encryption keys. I have checked the keys many times over and everything is the same. I find it odd that nothing has changed in almost 2 years.
I have 10 other VPN connections that are always up at never have any problems. I have the same make/model router connected to other offices with no problems. I have swapped the router twice, and each time I get the same symptoms.
View 1 Replies
View Related
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
Apr 6, 2013
I really worked hard not to write this question here but here I am. I am trying to route all traffic through vpn but I cant browse the web. It seems no traffic goes through the vpn tunnel. Split tunneling works but it doesnt route the traffic through vpn tunnel. I have a cisco asa5505 with base license,
When I try to browse the web with one of the clients I see lots of
6Apr 07 201309:40:5510.10.50.136088410.10.10.153Built inbound UDP connection 834 for outside:10.10.50.13/60884 (10.10.50.13/60884) to outside:10.10.10.1/53 (10.10.10.1/53) (xxxx
messages but at the end I see " Safari could not open the page because the server stopped responding" message or smth similar.
My setup is
Vpn Clients ====== asa5505 ========== CiscoLinksysEA4500 Router ======== ISPProvidedFiberConverterDevice(huawei)
10.10.30.10-10.10.30.50 10.10.10.2(outside int) 10.10.10.1(inside) PPOE(outside)
[Code].....
View 1 Replies
View Related
Jan 12, 2012
I just bought an E3000 router. The Setup that comes in the CD does not support OSX 10.7.2 which is the latest version of the operating system.Is there some way to connect it wirelessly to a MacBook running 10.7.2?
View 3 Replies
View Related
Oct 10, 2011
how to connect macbook air with cisco 1100 series access point
View 2 Replies
View Related
